共查询到16条相似文献，搜索用时 125 毫秒
1.
2.
10MW级海上浮式风机运动特性研究 总被引：2，自引：2，他引：0
以DTU 10 MW基准风机为研究对象,单柱式平台作为基础支撑结构,使用FAST软件计算分析,考虑单独风、单独波浪以及风浪组合三种环境条件,对10 MW级海上浮式风机的运动特性进行研究。研究发现:系统摇荡是风激励的低频运动和波浪激励的波频运动的合成,气动阻尼削弱系统的波频运动;系统纵荡和纵摇运动存在明显的耦合现象,而垂荡运动和其他方向的运动没有耦合关系;受纵摇影响,转动的风轮产生陀螺惯性力矩,激励首摇运动;随着风机单机容量的增加,风激励的低频运动比例增大,波浪激励的波频运动比例减小。 相似文献
3.
共振运动是深海浮式平台设计的关键考虑因素之一,对海洋平台的作业具有重要影响。采用半潜式平台运动的非线性耦合数学模型,考虑浮筒和横撑出入水以及垂荡、横摇和纵摇运动耦合对平台浮力和恢复力的影响,研究半潜式平台非线性共振运动特性,以及不规则波浪参数对运动的影响。研究表明:在非线性耦合运动和浮力变化的影响下,半潜式平台纵摇和垂荡运动的固有周期会随运动幅值的增大而逐渐减小,且最终趋于稳定,对纵摇运动周期的影响更为显著;非线性效应会使半潜式平台产生显著的低频纵摇共振响应,以及共振频率漂移的现象,且受随机种子和波浪周期的影响较小。 相似文献
4.
随着海上风电产业的快速发展,大型浮式风机逐渐从概念设计走向工程应用,但仍面临较大的挑战。一方面,在风、浪等环境载荷的作用下,浮式风机的气动载荷和水动力响应之间存在明显的相互干扰作用;另一方面,风力机大型化使得叶片细、长、薄的特点愈发突出,叶片柔性变形十分显著,这会影响到浮式风机的耦合性能。基于两相流CFD求解器naoe-FOAM-SJTU,结合弹性致动线模型和等效梁理论,建立了浮式风机气动—水动—气弹性耦合响应计算模型,并对规则波和剪切风作用下Spar型浮式风机的气动—水动—气弹性耦合响应进行了数值模拟分析。结果表明,风力机气动载荷使得叶片挥舞变形十分显著,而叶片的扭转变形会明显降低风力机的气动载荷。此外,风力机气动载荷会增大浮式平台的纵荡位移和纵摇角,同时,浮式平台运动响应会导致风力机气动载荷产生大幅度周期性变化。进一步地,叶片结构变形响应会使得浮式风机尾流场的速度损失和湍动能有所降低。 相似文献
5.
借助FAST软件对OC4半潜式浮式风机平台进行数值计算,分析了影响海上浮式风机平台首摇运动的一系列重要因素及其变化规律(如风向变化、浪向变化、陀螺力矩等)。研究了平台首摇运动所诱导的风机系统动力响应,发现浮式风机首摇运动不仅会加剧平台耦合运动响应,而且还会影响风机的气动性能和加剧锚泊张力波动。提出并探讨了几种减小海上浮式风机支撑平台首摇运动的方法。 相似文献
6.
采用多体动力学方法研究了H型浮式垂直轴风力机的动力特性。将风力机叶片和塔柱处理为柔性体,浮式基础处理为刚性体,考虑柔性体的非线性变形,由拉格朗日第二类方程建立了浮式风力机系统的非线性刚—柔耦合多体动力学方程。系统载荷包括浮式基础受的波浪力、风机叶片旋转时受到的气动载荷、塔柱受到的风压载荷、系泊力以及系统阻尼力。编制了模拟系统响应的数值计算程序,该程序可以考虑浮式风力机系统的刚—柔耦合和气动力—水动力耦合效应。以5 MW风力机为例,计算了叶片的固有频率;分析转速对叶片固有频率的影响;计算风、浪联合作用下浮式风力机系统的动力响应。结果表明,随着风机转速的增加,叶片切向固有频率增加、法向固有频率减小;在风、浪联合作用下,浮式基础运动以波浪频率为主,气动载荷贡献较小。 相似文献
7.
针对具有天然岛礁庇护或人工庇护的温和海洋环境,提出了一种混合模块大型浮式结构系统,即水动力性能更优的半潜式模块作为内侧主模块,消波效果更优的箱式模块作为外侧浮式防波模块和波浪能发电模块.波浪能装置利用外侧箱式模块与内侧半潜式模块的相对纵摇运动进行发电.考虑模块间多体水动力耦合效应和连接器机械耦合效应,基于ANSYS-AQWA程序重点研究了典型海况下混合5模块串联浮式结构系统的动力响应特征.结果表明,外侧箱式模块和波浪能发电装置能有效减弱内侧半潜式主模块运动响应、连接器动力响应和系泊缆绳张力,并且提供一定的能源供给.所得研究成果可为模块化超大型浮式结构系统的防波—发电集成系统设计提供参考. 相似文献
8.
随着风电产业向深远海发展,浮式风机已经成为海上风机未来的发展趋势.由于复杂的风浪联合环境载荷作用,浮式风机作业时通常会产生大幅度的运动响应,这一方面会使得浮式风机系统受到的水动力载荷更加复杂,另一方面会影响浮式风机的输出功率.因此,如何有效地抑制浮式风机系统的运动响应就成为了设计的关键.基于非稳态致动线模型和两相流求解器naoeFOAM-SJTU,进行了带垂荡板的浮式风机耦合性能研究.首先在OC3-Hywind Spar平台上附加垂荡板,并结合NREL-5 MW风力机建立带垂荡板的浮式风机模型.其次对比不同形状的垂荡板对Spar-5 MW型浮式风机气动—水动耦合结果,分析相同风浪联合作用条件下垂荡板形状对浮式风机耦合响应的影响.研究结果表明:垂荡板能够减小纵荡和垂荡等运动响应幅值,但是对纵摇运动响应影响较小;当垂荡板直径和吃水位置相同时,相同风浪条件下圆形垂荡板能使浮式风机的气动平均功率增大约0.844％,而正方形垂荡板却使平均功率减小1.492％,这说明圆形垂荡板对浮式风机系统的作用效果整体而言优于正方形. 相似文献
9.
半潜浮式风机逐渐在深海风电开发中受到关注,建立风机、平台与系泊结构耦合数值计算模型,通过FAST与AQWA链接进行风机塔基荷载及平台运动响应相互耦合传递,基于随机波与极限波组合模型生成畸形波时程序列,进行半潜浮式风机系泊失效全过程时域模拟计算分析,得出系泊锚链张力、风机、塔筒和平台运动时程响应,探究系泊失效、风机停机和叶片变桨速率对浮式风机平台系泊结构动力响应的影响。结果表明：畸形波作用下浮式平台和系泊结构动力响应显著,系泊失效导致塔基剪力增加,平台纵荡和纵摇运动响应显著增大;风机停机会引起系泊锚链张力显著减小,转子推力、塔基剪力和叶尖挥舞位移响应逐渐衰减,平台纵荡、纵摇和横摇运动响应显著减小;随着叶片变桨速率增加,风机转子推力和塔基剪力波动幅值增大。 相似文献
10.
海上浮式风机气动性能数值模拟 总被引：1，自引：0，他引：1
采用计算流体动力学(CFD)方法,基于RANS方程和SST k-ω湍流模型,对OC3-Hywind Spar浮式平台支撑的NREL5 MW风机进行气动性能模拟。对固定式风机的数值模型做网格无关性验证,同时考虑垂直风切变的影响,并将数值结果与NREL设计数据进行对比以验证模型的有效性。在FLUENT软件中,设定嵌入式滑移网格和用户定义程序(UDF)来模拟风机叶轮随平台的周期运动,分别研究浮式平台的纵荡、纵摇和首摇运动对风机气动荷载的影响。数值结果表明平台的纵荡和纵摇运动对输出功率影响较大,且平台运动幅值越大周期越低,其气动荷载变化越剧烈。合理控制平台的运动幅值对提高浮式风机的发电性能和疲劳强度有很大作用。 相似文献
11.
对于海上浮式风机而言,由于受到剪切风、塔影效应、浮式基础运动等因素的共同影响,其气动载荷会更加复杂,因此如何准确快速地对海上风力机的气动性能进行预估显得尤为重要。基于速度势的非定常面元法理论,研究海上浮式风机气动载荷特性,编制了相关的计算程序。以NREL 5 MW风机为例,建立了叶片和尾流的三维数值模型,计算得到了不同风速下风机的输出功率以及叶片表面的压力分布,对比数据结果分析了该方法的可靠性。针对非定常流动,模拟了剪切风和塔影效应的作用,并重点分析了浮式基础运动对风机气动载荷的影响。研究表明,浮式基础的纵荡和纵摇会增加输出功率的波动幅值,艏摇运动会导致单个叶片上的气动载荷产生较大的波动,为浮式风机叶片控制提供了参考。 相似文献
12.
Offshore wind farm construction is nowadays state of the art in the wind power generation technology.However,deep water areas with huge amount of wind energy require innovative floating platforms to arrange and install wind turbines in order to harness wind energy and generate electricity.The conventional floating offshore wind turbine system is typically in the state of force imbalance due to the unique sway characteristics caused by the unfixed foundation and the high center of gravity of the platform.Therefore,a floating wind farm for 3×3 barge array platforms with shared mooring system is presented here to increase stability for floating platform.The NREL 5 MW wind turbine and ITI Energy barge reference model is taken as a basis for this work.Furthermore,the unsteady aerodynamic load solution model of the floating wind turbine is established considering the tip loss,hub loss and dynamic stall correction based on the blade element momentum(BEM)theory.The second development of AQWA is realized by FORTRAN programming language,and aerodynamic-hydrodynamic-Mooring coupled dynamics model is established to realize the algorithm solution of the model.Finally,the 6 degrees of freedom(DOF)dynamic response of single barge platform and barge array under extreme sea condition considering the coupling effect of wind and wave were observed and investigated in detail.The research results validate the feasibility of establishing barge array floating wind farm,and provide theoretical basis for further research on new floating wind farm. 相似文献
13.
Offshore wind turbines can exhibit dynamic resonant behavior due to sea states with wave excitation frequencies coinciding with the structural eigenfrequencies. In addition to significant contributions to fatigue actions, dynamic load amplification can govern extreme wind turbine responses. However, current design requirements lack specifications for assessment of resonant loads, particularly during parked or idling conditions where aerodynamic damping contributions are significantly reduced. This study demonstrates a probabilistic approach for assessment of offshore wind turbines under extreme resonant responses during parked situations. Based on in-situ metocean observations on the North Sea, the environmental contour method is used to establish relevant design conditions. A case study on a feasible large monopile design showed that resonant loads can govern the design loads. The presented framework can be applied to assess the reliability of wave-sensitive offshore wind turbine structures for a given site-specific metocean conditions and support structure design. 相似文献
14.
In order to account for rigid-flexible coupling effects of floating offshore wind turbines, a nonlinear rigid-flexible coupled dynamic model is proposed in this paper. The proposed nonlinear coupled model takes the higher-order axial displacements into account, which are usually neglected in the conventional linear dynamic model. Subsequently,investigations on the dynamic differences between the proposed nonlinear dynamic model and the linear one are conducted. The results demonstrate that the stiffness of the turbine blades in the proposed nonlinear dynamic model increases with larger overall motions but that in the linear dynamic model declines with larger overall motions.Deformation of the blades in the nonlinear dynamic model is more reasonable than that in the linear model as well.Additionally, more distinct coupling effects are observed in the proposed nonlinear model than those in the linear model. Finally, it shows that the aerodynamic loads, the structural loads and global dynamic responses of floating offshore wind turbines using the nonlinear dynamic model are slightly smaller than those using the linear dynamic model. In summary, compared with the conventional linear dynamic model, the proposed nonlinear coupling dynamic model is a higher-order dynamic model in consideration of the rigid-flexible coupling effects of floating offshore wind turbines, and accord more perfectly with the engineering facts. 相似文献
15.
参考英国的Kincardine风机采用的新式的Semi-Spar概念,结合spar式基础和半潜式基础的特点,提出了一种新式海上浮式风机平台模型,并基于三维势流理论,利用AQWA软件进行水动力计算,验证新式平台可靠性。分析了在风、浪、流荷载联合作用下,锚链竖向夹角、系缆数量对风机浮式平台运动性能和系泊张力的影响,对系泊系统进行优化,并验证极端工况下的可靠性。结果证明风机平台水平运动和纵摇运动幅值较小,但垂荡幅值略大,而通过减小锚链竖向夹角可以控制平台运动响应幅值,增加系缆数量可以同时减小系泊张力大小。计算结果证明了新型Semi-Spar式海上风机平台可行性,为浮式风机平台及系泊系统的设计提供参考。 相似文献
16.
This paper quantitatively studies the transient dynamic response of a semi-submersible production platform with the loss of one or several positioning mooring lines.A semi-submersible platform,production risers,and positioning mooring lines are all included in the numerical simulation.Increased motion of the semi-submersible platform,tension variation of the remaining mooring lines/risers and the risk of mooring line or riser clashing are all investigated through fully coupled time-domain analysis.Combined environmental loads are selected from irregular waves and the steady current varying from very rough to extreme sea conditions.Three dimension radiation/diffraction theories and Morison’s equation are applied to calculate first-order wave force and second-order mean drift force of floating semi-submersible platform.Nonlinear time-domain finite element methods are employed to analyze the behavior of mooring lines and risers.Results show that the failure of mooring lines seriously reduce the platform’s stability performance.The tension of the rest lines is also increased accordingly.Remaining lines which are closer to the failed lines will have larger tension increase to compensate.Line-Line distance provides practical information for the risk of clashing investigation. 相似文献