共查询到20条相似文献，搜索用时 406 毫秒
1.
2.
The temperature measurement system of the standard Woods Hole Oceanographic Institution/Neil Brown Instrument Systems conductivity-temperature-depth microprofiler consists of a platinum thermometer, which has stable calibration characteristics but response time of order 200 ms combined with a fast response thermistor designed to sample the higher frequency temperature fluctuations. The calibration characteristics and temporal response of the individual sensors relative to the conductivity cell were studied using a modified instrument which digitized these data channels separately. The relative responses of the individual sensors were found to be fairly well modeled by a single pole filter, but the response of the standard temperature signal, which is an analog combination of the two temperature sensor outputs, exhibited a complicated behavior. Several methods for obtaining a well-calibrated fast-responding temperature signal from the digitized platinum thermometer and thermistor records are discussed. Preliminary results suggest that thermohaline features on scales of less than a meter in the vertical are resolvable. 相似文献
3.
Bessette R.R. Harwood D.F. Brainard E.C. II 《Oceanic Engineering, IEEE Journal of》1988,13(3):140-143
The initial response pattern for a conventional two-electrode, membrane-type dissolved-oxygen probe connected to an ENDECO model 1125 dissolved-oxygen sensor controller is presented. The controller implements a chronoamperometric technique and involves application of the polarizing potential as a pulse. The pulse duration confines the diffusion boundary within the internal electrolyte and the membrane. The time required for readout stabilization is attributed to the establishment of an equilibrium involving diffusion of reactant and product of the electrochemical reaction. A procedure for minimizing the role of membrane stretch in establishing the equilibrium time is discussed. Data obtained on changing the pulse repetition interval are presented in support of the establishment of an equilibrium condition. Sensor response over a 32-day period is noted. Calibration curve data demonstrate the linearity of response with varying oxygen concentrations. Response time data indicate attainment of better than 99% of full deflection within three minutes of a change in oxygen concentration 相似文献
4.
Resulting from the rising levels of atmospheric carbon, ocean acidification has become a global problem. It has significant impacts on the development, survival, growth and physiology of marine organisms. Therefore, a highprecision sensor is urgently needed to measure the pH of sea-water. Iridium wire with a diameter of 0.25 mm is used as the substrate, and an Ir/Ir(OH)_x pH electrode is prepared by a one-step electrochemical method in a Li OH solution at the room temperature. A scanning electron microscope(SEM) observation reveals that it is coated with nanoscale particles. In laboratory tests, the electrode exhibits a very promising pH response, with an ideal Nernst slope(56.14–59.52), fast response, good stability and long life-span in tested pH buffer solutions. For a sea trial,four pH electrodes and one Ag/Ag Cl reference electrode are integrated with a self-made chemical sensor, and a profile detection of nearly 70 m is implemented near Newport Harbor, California on August 3, 2015. The results reflect that the pH value measured by the sensor is very close to the data given by Sea-Bird 911 plus CTD, with a difference value ranging from 0.000 075 to 0.064 719. And the sensor shows a better data matching degree in 0–40m water depth. In addition, the high precision and accuracy of the sensor make it possible to use in the ocean observation field. 相似文献
5.
A series of transient tests were conducted to determine the seafloor coupling characteristics of a new ocean-bottom seismometer (OBS) developed for the United States Office of Naval Research (ONR). The OBS comprises a large recording package and a separate sensor package that is deployed from the recording package. In addition to the coupling characteristics of both the sensor and the recording packages, the seismic energy radiated from the main recording package as a result of motion of the recording package was measured. The observed vertical coupling resonances of both the recording package and the sensor package are in good agreement with those predicted by a simple model of soil-structure interaction. The most important result of this study is that significant energy is radiated from the recording package in response to horizontal motions of the recording package. When the sensor package is 1 m from the recording package, the amplitude of the recorded signal is similar to that recorded in the recording package. In the field, this effect will result in distortion of seismic signals and increased background noise recorded by the sensor package if the recording package is disturbed by seafloor currents or biological activity. The amplitude of this signal attenuates by approximately a factor of two as sensor/recorder separation is increased from 1 to 6 m, suggesting that an improved response can be achieved by increasing the separation between the recording package and the sensors. This effect is much less severe for vertical disturbances of the recording package. 相似文献
6.
7.
8.
The location of the hydrophones on a towed underwater acoustic array as a function of time (array element localization) is needed for signal processing. Methods to perform this localization using least squares polynomial fitting to data from depth sensors, heading sensors, and sensors detecting a ping from a single source are discussed. Arc distance along the array is used as the independent parameter so that all solutions are constrained to be space curves. Examples of application to real data are presented, and techniques to discriminate against bad sensor data are discussed 相似文献
9.
This paper presents a technique for adaptively tracking bathymetric contours using an autonomous underwater vehicle (AUV) equipped with a single altimeter sonar. An adaptive feature mapping behavior is developed to address the problem of how to locate and track features of unknown extent in an environment where a priori information is unavailable. This behavior is implemented as part of the layered control architecture used by the AUV Odyssey II. The new adaptive feature mapping behavior builds on previous work in layered control by incorporating planning and mapping capabilities that allow the vehicle to alter its trajectory online in response to sensor data in order to track contour features. New waypoints are selected by evaluating the expected utility of visiting a given location balanced against the expected cost of traveling to a particular cell. The technique is developed assuming sensor input in the form of a single, narrow-beam altimeter sensor attached to a non-holonomic, dynamically controlled survey-class AUV such as the Odyssey II. Simulations of the Charles River basin which have been constructed from real bathymetry data are used as test missions. The 7-m contour line of a prominent trench in the river serves as the target feature. The adaptive contour following behavior tracks the contour despite navigation error and environmental disturbances, supplying the capability of autonomously detecting and following distinctive bathymetric features using a point sensor. This behavior provides a foundation for future research in tracking of dynamic features in the water-column and for concurrent mapping and localization over natural terrain using a point sensor 相似文献
10.
传感器优化配置的修正逐步累积法 总被引：1，自引：0，他引：1
讨论了模态实验中传感器的配置问题。利用结构振型矩阵转置的 QR分解得到传感器的初始配置。以模态置信度 MAC矩阵的最大非对角元为目标函数 ,利用本文提出的修正逐步累积法得到传感器的配置 ,并提出传感器配置必须结合优化效果和经济性 2方面综合考虑 相似文献
11.
12.
13.
阐述了GPS/IMU系统进行位置与姿态测量的基本原理,推导了利用GPS/IMU的导航解计算遥感器瞬时外方位元素的数学模型,并利用机载三线阵影像验证了GPS/IMU辅助直接对地定位的精度潜力。三组ADS40数据直接定位的试验结果表明,GPS/IMU提供的外方位元素具有较高的定位精度,平面精度优于2.5个像元,高程优于5.1个像元,但存在系统性的测量误差,在大比例尺遥感测绘作业中引入少量控制点参与平差仍是必须的。 相似文献
14.
研制出一种对溶解氧敏感的传感膜,其荧光材料主要是邻菲咯啉钌。由光源发出的中心波长为465 nm的强光照射到铺有该络合物的膜片上,激发出中心波长为620 nm的荧光,水体中的溶解氧会对激发出的荧光产生猝灭效应,猝灭程度与溶解氧的质量浓度之间存在线性关系。该膜片在无氧水中的荧光强度是空气饱和水中的20倍,变化较为明显。对比检测荧光信号在待测水体中猝灭前后的强度,即可测出水体中溶解氧的质量浓度。基于这一原理和荧光测量技术研制了光学溶解氧分析仪,利用该仪器对6处不同水域的天然水体进行测试,所得测试结果与国标碘量法的测试结果之间不存在显著性差异,误差≤2%,响应时间<1 min。在海水中30 m深处进行36h稳定性考察,所得溶解氧质量浓度数值平均偏差小于0.2 mg.L-1,证实仪器可适应较为恶劣的环境,且稳定性较好。 相似文献
15.
中高空间分辨率宽波段光学卫星已成为赤潮监测的主要数据源,但与水色卫星传感器不同,中高空间分辨率卫星传感器主要面向陆地应用,其波段数量少、宽度大,由此对赤潮探测带来的影响尚待研究。为此,本文基于不同优势种赤潮实测高光谱数据、时空同步的GF-1 WFV2、GF-1 WFV3传感器影像、Sentinel-2A MSI传感器影像及GF-6 WFV传感器影像,探究了波段设置、光谱响应函数、信噪比及空间分辨率对赤潮探测的影响,并分析了红边波段赤潮探测优势。结果表明:波段设置对赤潮探测影响大,特别是红光波段和红边波段的中心波长和波段宽度;波段设置相同的情况下,赤潮探测精度受光谱响应函数的影响大,受信噪比的影响较小;空间分辨率对赤潮探测的影响较大,空间分辨率的提升有助于提高赤潮探测的精度。红边波段赤潮探测实验表明,较之红光波段,基于红边波段的赤潮探测具有明显的优势,平均F1-Score提高了11%。本文的研究结果一方面可为赤潮中高空间分辨率卫星探测的数据选取提供理论依据,另一方面可为中高空间分辨率卫星传感器的设计提供参考。 相似文献
16.
基于测量结构水下光纤应变获取冰力的方法首次应用于渤海JZ20-2NW加锥导管架平台,该方法方便进行零点标定,可获取结构总冰力的绝对信息(包括均值和波动值)。首先介绍了JZ20-2NW平台的现场监测系统,主要包括结构水下应变响应记录冰力信息,甲板上部视频记录同步冰情(冰厚、冰速和来冰方向)信息和拾振器记录结构冰振响应;重点分析了由测点应变向结构总冰力的转化方法,并对总冰力进行了初步分析。将无量纲化实测冰力与5种典型冰力计算模型进行了比较,分析结果表明,锥体宽度与海冰厚度比值(简称"宽厚比")对冰力大小及变化起决定作用。 相似文献
17.
Definitive studies on the response of marine mammals to anthropogenic sound are hampered by the short surface time and deep-diving lifestyle of many species. A novel archival tag, called the DTAG, has been developed to monitor the behavior of marine mammals, and their response to sound, continuously throughout the dive cycle. The tag contains a large array of solid-state memory and records continuously from a built-in hydrophone and suite of sensors. The sensors sample the orientation of the animal in three dimensions with sufficient speed and resolution to capture individual fluke strokes. Audio and sensor recording is synchronous so the relative timing of sounds and motion can be determined precisely. The DTAG has been attached to more than 30 northern right whales (Eubalaena glacialis) and 20 sperm whales (Physeter macrocephalus) with recording duration of up to 12 h per deployment. Several deployments have included sound playbacks to the tagged whale and a transient response to at least one playback is evident in the tag data. 相似文献
18.
This paper describes an architecture for a compact real-time time-delay sonar beamformer. The design is based on a time-domain interpolation concept, and includes shading, interpolation, and time-delay functions for up to 64 sensor data inputs. A one card per beam configuration has been achieved. The digital interpolation technique used improves the effective sampling rate by a factor of 128. The beamformer design features 16-bit arithmetic precision, up to approximately a 5-kHz sampling rate for each of the 64 sensor input channels, and adaptability to any type of array, e.g., linear, circular, or arrays with nonequal interelement spacings. A 31-beam beamformer system, performing more than 620-million arithmetic operations a second, is discussed. 相似文献
19.
Hiroshi Hasumoto Tsuneo Imazu Toshiaki Miura Kazuhiro Kogure 《Journal of Oceanography》2006,62(1):99-103
The use of an optical oxygen sensor to measure dissolved oxygen in seawater was investigated. The sensor is based on the dynamic
quenching of an oxygen-sensitive fluorochrome embedded in the tip. Dissolved oxygen in seawater samples collected from eight
stations at depths ranging from 3000 to 6000 m was analyzed both with the optical sensor and by the Winkler titration method.
The two sets of data did not differ significantly. The stability and simplicity of the method and the good agreement of the
results with those of the titration method indicate that the sensor would be useful for fieldwork. 相似文献
20.
耐高压高精度快速时间响应温度传感器的封装技术 总被引：2，自引：0，他引：2
文章详细阐述了耐高压高精度快速时间响应温度传感器的设计方法和封装工艺,并给出了温度传感器测试时间响应的方法以及目前达到的水平。对该项技术应用作了介绍。 相似文献