首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Sa'ar–Nayfa reservoir is mainly made up of carbonate sediments with bands of shale that contain a substantial amount of proven oil in the Hiswah Oilfield, Sayun–Masila Basin, eastern Yemen. Several vertical wells have been drilled and penetrated these sequences. This study is concerned on the petrophysical evaluation and well log analysis of the Lower Cretaceous of 11 wells at the Hiswah Oilfield, Hadramawt Governorate, eastern Yemen. Computer-assisted log analyses were used to evaluate the petrophysical parameters such as shale volume, total porosity, effective porosity, water saturation, hydrocarbon saturation, flushed zone saturation and reservoir and pay flags. Cross-plots of the petrophysical parameters versus depth were illustrated. The Lower Cretaceous Sa'ar–Nayfa reservoir reflects that the matrix components are mainly carbonates and shales. Moreover, the lithological-geologic model reflected that these shales are strongly affecting the porosity and, consequently, the fluid saturation in the Sa'ar–Nayfa reservoir. In this study, the thickness of the Sa'ar–Nayfa reservoir increases from central toward north-eastern and north-western parts within the Hiswah Oilfield. The porosities analyses of the investigation of the Sa'ar–Nayfa reservoir for the 11 studied wells concluded that the average total porosity ranges from 5.4 % to 16.8 % while the effective porosity ranges from 5.2 % to 14.8 %. Water saturation of the Sa'ar–Nayfa reservoir ranges from 6.9 % to 75.8 %. On the other hand, hydrocarbon saturation matches with water saturation in a reverse relationship. Sa'ar–Nayfa reservoir is interpreted as good quality reservoir rocks with high average effective porosity reaching to 20 % and high hydrocarbon saturation exceeding 93 %. The Sa'ar–Nayfa reservoir reveals promising reservoir characteristics especially the upper reservoir unit, which should be taken into consideration during future development of the oilfields area. The hydrocarbon saturation map of the Sa'ar–Nayfa reservoir shows a regular pattern of distribution with a general increasing to the northeast, northwest and east directions while decreasing southwest wards, recording the maximum value of 93.1 % at the Hiswah-21 well.  相似文献   

2.
The Gulf of Suez is characterized by the presence of many hydrocarbon-bearing fields including reservoirs ranging in age from the Palaeozoic to the Tertiary. East Morgan oil field is one of the promising oil fields which are located in the southern part of the Gulf of Suez and tapping hydrocarbon deposits and potentials of the Miocene age. The purpose of this work is to evaluate the Miocene sediments of the Asl and Hawara Formations in East Morgan oil field (western sub-basin) through carrying out an integrated petrophysical, seismic structural and sequence stratigraphy study. Quantitative well logging analyses are carried out over Asl and Hawara Formations to throw light over their hydrocarbon potentiality. Good oil saturation is exhibited by the sand sections of Asl Formation, and fair to good are assigned for those of Hawara Formation in the Belayim dip province. On the other hand, a little hydrocarbon saturation is represented by both formations to the south of the study area in the Morgan accommodation zone (MAZ). The estimated petrophysical parameters of Asl reservoir throughout the study area range between 4 % and 10 % for effective porosity, 18 % and 89 % for shale volume and 2 % and 48 % for hydrocarbon saturation. Meanwhile, the ranges of 1–8 %, 20–98 % and 2–32 % are given for Hawara Formation for effective porosity, shale volume and hydrocarbon saturation, respectively. The lateral distribution maps show that the central and the western parts of the MAZ attain the best petrophysical parameters and hydrocarbon potentiality. Seismic facies analysis, structural framework and depositional history of the study area were studied through interpreting the seismic reflection data of 27 seismic profiles. A number of geo-seismic cross sections are constructed and interpreted to investigate the structural setting of the study area and clarify the main structural elements that affect the hydrocarbon bearing reservoirs. A group of simple NW–SE step-like normal faults, parallel to the Clysmic trend, is found cutting through the reservoir rocks at the bottom layers of the section (Rudeis Formation) and extending upwards to overlying layers (Zeit Formation). Some graben- and horst-shaped structures are found and usually bounded by two sets of oppositely dipping normal step-like cross faults. The seismic facies and sequence analysis revealed that the Miocene rocks are subdivided into two major third-order depositional sequences (S1 and S2), separated by two major depositional sequence boundaries (DSB1 and DSB2). The first sequence (S1, Lower–Middle Miocene rocks) is of prime interest, as it encounters the main hydrocarbon reservoirs in the study area (Asl and Hawara Formations that are equivalent to Rudeis Formation). The seismic facies of this sequence are characterized by low to moderate amplitude, discontinuous horizons and bounded by the depositional sequence boundary (DSB1) at the top. The reflection geometry at the cycle boundaries is considered as erosional truncation, toplaps and even concordant along the upper boundary of the cycle. The external form of these sediments is considered as sheet-like and wedge-shaped units. The entrapment of hydrocarbons seems to be of a combined effect of the stratigraphic and structural elements. It appears clear that both of the step-like structural fault system and the lateral variation of facies are the key parameters that control the accumulation of hydrocarbon in this area and in East Morgan field as a whole.  相似文献   

3.
The Lower Cretaceous Qishn Formation at Masila Basin, Yemen, contains substantial amounts of proven crude oil. It is divided into a lower shaly silisiclastic member and an upper carbonate member. In the present work, detailed formation evaluation of the Upper Qishn Clastic Member was carried out using the digitized well logging data from 12 wells, via computer-assisted analysis, to accomplish its reservoir characteristics and oil potentiality. Accordingly, the true resistivity (R t), porosity (total φ t and effective φ e), shale content (V sh), permeability (K), water saturation (S w), hydrocarbon saturation (S h) (movable “S hm” and residual “S hr”) and lithologic composition in each well were estimated, analyzed, and illustrated versus depth on litho-saturation cross-plots. Likewise, the areal distribution of such parameters alongside the member in the investigated area and their relations to geological setting were defined from the constructed isoparametric contour maps. Based on the obtained results, the components of Upper Qishn Clastic Member of Masila Basin are mainly shaly sandstone and minor calcareous sandstone with considerable amount of shale. Regionally, the Member was deposited on an inner neritic to shallow-marine platform setting. It is interpreted as a good-quality reservoir rock which has been established from high total porosity (15–22 %), good effective porosity (8–13 %), and variable shale volume (24–31 %). A number of high hydrocarbon saturation zones (exceeding 55 %) are detected through intervals having S w?<?60 % and S hm?>?20 % which have been considered as economic oil producers. The storage and pay capacities of the reservoir intervals have been resolved. The obtained results were confirmed from the available data of core analyses and production tests. The Upper Qishn Clastic Member reveals promising reservoir characteristics which should be taken into consideration during future development of the oilfields in the area.  相似文献   

4.
The present study has been carried out for core and log based petrophysical evaluation of subsurface reservoir sandstones considering at least one well from each of the Kailas Tila, Titas, Bakhrabad and Shahbazpur gas fields of Bangladesh. Core analysis results show that average core porosity, permeability and pore throat values are 20%, 209 mD and 44020 Å, respectively. These measured values support that the sandstone reservoirs are categorized as good quality reservoirs. Core porosity values usually exceed thin section porosity. Different cross-plots indicate that permeability is largely dependent on porosity. Permeability and porosity are also dependent on textural parameters that include size, shape, sorting and matrix of the reservoir sandstones. It reveals from both thin section study and different cross plots that diagenetic cements are the main controlling factors of the reservoirs. Quantitative determination of the volume of cements shows that cements have inverse correlation with porosity and permeability. Log based petrophysical parameters include shale volume, porosity, water and hydrocarbon saturation, permeability, moveability index and bulk volume of water. The average values of the mentioned parameters are 20%, 22%, 26%, 74%, 110 mD, 0.28 and 0.05, respectively. The most important parameters are porosity and permeability, which indicate that log porosity exceeds core porosity and log permeability significantly lags behind core permeability. The study also reveals that 23 gas zones covering total thickness of 385 m sandstones mostly posses good quality reservoirs except few moderate quality reservoirs.  相似文献   

5.
The lower Indus basin is one of the largest hydrocarbon producing sedimentary basins in Pakistan. It is characterized by the presence of many hydrocarbon-bearing fields including clastic and carbonates proven reservoirs from the Cretaceous to the Eocene age. This study has been carried out in the Sanghar oil field to evaluate the hydrocarbon prospects of basal sand zone of lower Goru Formation of Cretaceous by using complete suite of geophysical logs of different wells. The analytical formation evaluation by using petrophysical studies and neutron-density crossplots unveils that litho-facies mainly comprising of sandstone. The hydrocarbons potentialities of the formation zone have been characterized through various isoparameteric maps such as gross reservoir and net pay thickness, net-to-gross ratio, total and effective porosity, shaliness, and water and hydrocarbons saturation. The evaluated petrophysical studies show that the reservoir has net pay zone of thickness range 5 to 10 m, net-togross ratio range of 0.17 to 0.75, effective porosity range of 07 to 12 %, shaliness range of 27 to 40 % and hydrocarbon saturation range of 12 to 31 %. However, in the net pay zone hydrocarbon saturation reaches up to 95%. The isoparametric charts of petrophysically derived parameters reveal the aerial distribution of hydrocarbons accumulation in basal sand unit of the lower Goru Formation which may be helpful for further exploration.  相似文献   

6.
《地学前缘(英文版)》2019,10(3):1113-1124
Estimation of petrophysical parameters is an important issue of any reservoirs. Porosity, volume of shale and water saturation has been evaluated for reservoirs of Upper Assam basin, located in northeastern India from well log and seismic data. Absolute acoustic impedance (AAI) and relative acoustic impedance (RAI) are generated from model based inversion of 2-D post-stack seismic data. The top of geological formation, sand reservoirs, shale layers and discontinuities at faults are detected in RAI section under the study area. Tipam Sandstone (TS) and Barail Arenaceous Sandstone (BAS) are the main reservoirs, delineated from the logs of available wells and RAI section. Porosity section is obtained using porosity wavelet and porosity reflectivity from post-stack seismic data. Two multilayered feed forward neural network (MLFN) models are created with inputs: AAI, porosity, density and shear impedance and outputs: volume of shale and water saturation with single hidden layer. The estimated average porosity in TS and BAS reservoir varies from 30% to 36% and 18% to 30% respectively. The volume of shale and water saturation ranges from 10% to 30% and 20% to 60% in TS reservoir and 28% to 30% and 23% to 55% in BAS reservoir respectively.  相似文献   

7.
Hydrocarbon distribution rules in the deep and shallow parts of sedimentary basins are considerably different, particularly in the following four aspects. First, the critical porosity for hydrocarbon migration is much lower in the deep parts of basins: at a depth of 7000 m, hydrocarbons can accumulate only in rocks with porosity less than 5%. However, in the shallow parts of basins (i.e., depths of around 1000 m), hydrocarbon can accumulate in rocks only when porosity is over 20%. Second, hydrocarbon reservoirs tend to exhibit negative pressures after hydrocarbon accumulation at depth, with a pressure coefficient less than 0.7. However, hydrocarbon reservoirs at shallow depths tend to exhibit high pressure after hydrocarbon accumulation. Third, deep reservoirs tend to exhibit characteristics of oil (–gas)–water inversion, indicating that the oil (gas) accumulated under the water. However, the oil (gas) tends to accumulate over water in shallow reservoirs. Fourth, continuous unconventional tight hydrocarbon reservoirs are distributed widely in deep reservoirs, where the buoyancy force is not the primary dynamic force and the caprock is not involved during the process of hydrocarbon accumulation. Conversely, the majority of hydrocarbons in shallow regions accumulate in traps with complex structures. The results of this study indicate that two dynamic boundary conditions are primarily responsible for the above phenomena: a lower limit to the buoyancy force and the lower limit of hydrocarbon accumulation overall, corresponding to about 10%–12% porosity and irreducible water saturation of 100%, respectively.  相似文献   

8.
An integrated petrophysical well log and core data analysis of the Alam El Bueib-3D (AEB-3D) and Alam El Bueib-3E (AEB-3E) reservoirs, Tut oil field, North Western Desert, Egypt, allows the evaluation of those parameters critical to their reservoir characterization. The determined reservoir properties investigated are lithology, depositional paleoenvironments, shale volume, porosity, fluid saturation and net pay thickness. As the analysis of reservoir pressure is essential to specify the driving mechanisms that control the behavior of fluids within reservoirs, pressure analysis identified the Alam El Bueib-3D reservoir to be partial water drive and Alam El Bueib-3E to be an active water drive. In addition, the pressure analysis identified two additional hydrocarbon-bearing reservoirs in the Alam El Bueib-3D. Stacking patterns of the Alam El Bueib-3D reservoirs are generally fining upward sequences reflecting fluvial to braided fluvial paleoenvironments. The Alam El Bueib-3E channel shows blocky patterns with sharp bases and tops diagnostic of distributary channels. Statistical analysis of core permeability and porosity values of the Alam El Bueib reservoirs indicate very good reservoir quality. Scatter diagrams of porosity values derived from core analysis for the AEB-3D and AEB-3E reservoirs reveal correlation coefficient (r) values of 0.93 and 0.64, respectively, indicating strong linear relationships. Plots of porosity values against permeability values also show strong linear relationships in all the reservoirs indicating that the AEB-3D and the AEB-3E are permeable and with strong pore communication. The permeability measurements indicate restricted reservoir heterogeneity as plots of vertical permeability values against horizontal permeability values exhibit linear trends. Altogether, the reservoir characterization of the Alam El Bueib reservoirs demonstrates their excellent potential for hydrocarbon production.  相似文献   

9.
广安气田上三叠统须四段和须六段气藏发育了构造气藏、构造-岩性气藏和岩性气藏.储层具有低孔、低渗、低阻和高束缚水饱和度特征.空间上,储层孔渗相关关系变化大,气水分布复杂,气水层识别困难.根据岩心对测井的标定,研究了须四段和须六段四性关系,认识到储层为细砂岩、中砂岩和粗砂岩,具有低自然伽马、低补偿密度、低电阻率和高声波时差特征,而物性与含气性无明显相关性.采取了分层、分区块建立储层孔隙度、渗透率模型,提高了物性解释精度.不同气藏类型具有不同的气水分布,应用阵列感应、核磁共振和综合判识3种方法进行了气水层识别,提高了广安气田气水层识别精度.这些方法在广安气田的应用表明可以准确识别构造气藏和构造-岩性气藏的气、水层,但对构造幅度低的岩性气藏识别精度不高,因为在这些岩性气藏中气水分异不彻底,气层与气水同层、水层含水饱和度是渐变的.   相似文献   

10.
《China Geology》2022,5(3):393-401
This study focused on the quantitative analysis of the petrophysical parameters in characterizing the reservoir properties of the Srikail gas field using multi-scale wireline logs. Petrophysical parameters (shale volume, porosity, water saturation and hydrocarbon saturation) were estimated from the combination of gamma ray log, resistivity log, density log and neutron log for three hydrocarbon (gas)-bearing zones at well#3. At the first time, log records at 0.1 m and 0.2 m intervals were read for this study. Result showed the average shale volume is 21.07%, 53.67% and 51.71% for zone-1, zone-2 and zone-3, respectively. For these zones, the estimated average porosity was 35.89%, 29.83% and 28.76%, respectively. The average water saturation of 31.54%, 16.83% and 23.39% and average hydrocarbon saturation of 68.46%, 83.17% and 76.61% were calculated for zone-1, zone-2 and zone-3, respectively. Thus zone-2 is regarded the most productive zone of well#3. It was found that the values of some parameters (porosity, hydrocarbon saturation and permeability) are higher than the existing results. Therefore, this study confirmed that the log reading at minute/close interval provides better quantitive values of the reservoir’s petrophysical properties. It is expected that this result will contribute to the national gas field development program in future.©2022 China Geology Editorial Office.  相似文献   

11.
Current oil saturation in the Moxizhuang (莫西庄) Oil Field in central Janggar (准噶尔) basin was evaluated by logging interpretation and measured on core samples, and the paleo-oil saturation in both the pay zones and water zones was investigated by graln-containing-oil inclusion (GOI) analysis.The pay zones in this field have low oil saturation and display low resistivity and small contrast between pay zones and water zones, and are classified as low-porosity, low oil saturation, and low resistivity reservoirs. Both the current low oil-saturation pay zones and the water zones above 4 365 m have high GOI values (up to 38%), suggesting high paleo-oil saturation. The significant difference between current oil saturation from both logging interpretation and core sample measurement and paleo-oil saturation indicated by GOI analysis suggests that this low oil-saturation field evolved from a high oil-saturation pool. Lateral re-migration and spill of formally trapped oil owing to changes in structural configuration since Neogene was the most plausible mechanism for oil loss in the Moxizhuang Oil Field.The combined effects of differential accumulation in the charge phase and the differential re-migration and spill of accumulated oil in Neogene are responsible for the complicated correlation between residual oil saturation and porosity/permeability of the reservoir sandstones and the distribution of low oil-saturation pay zones and paleo-oil zones (current water zones).  相似文献   

12.
This study is a contribution to our understanding of the hydrocarbon potentials of the Nkporo Shale in the Anambra Basin, Nigeria. The main objective was to simulate the hydrocarbon generation and expulsion in the Nkporo source horizons encountered in Igbariam-1, Iji-1, and Ajire-1 wells drilled in the basin, using the one-dimensional Genesis Zetaware basin modeling software. This software enabled the integration of burial and thermal influences on Nkporo source rocks with kinetic parameters, in order to define the timing of hydrocarbon generation and expulsion in relation to the main structural episodes in the basin. The Nkporo source horizons encountered in Igbariam-1 well (2,650 m) has not expelled hydrocarbons but has a remaining potential of 380 mg/gTOC. Conversely, in Iji-1 well (3,450 m) and Ajire-1 well (3,250 m), the Nkporo source rocks expelled oil of about 110–127 mg/gTOC and gas of about 85–125 mg/gTOC. The time of expulsion was in Eocene–Oligocene (51–30 My) at the rate of 10.5–11.5 mg/gTOC/My. The remaining potentials for Nkporo source rocks in Iji-1 and Ajire-1 wells are 160 and 125 mg/gTOC, respectively. The result shows an increasing trend in maturation, generation, and expulsion of hydrocarbons with increasing depth towards the southwestern part of the basin. This resulted in an increase in the generated hydrocarbon volumes to the south due to (a) increased burial depth and early maturation and (b) changing source lithofacies—more marine. The fault system linking potential reservoirs such as Owelli Sandstone to the source rock suggests a possible migration of the generated hydrocarbons to those reservoirs at that time.  相似文献   

13.
Oil was first discovered in the Masila area of Yemen in the late 1990s, with about 90% of the reserves found in the Lower Qishn Clastic Member of the Qishn Formation. The porosity determinations of the Lower Qishn Clastic are relatively high and the permeability ranges from 103 to 374?md. This paper tries to evaluate the hydrocarbons in the porous zones encountered in the Lower Cretaceous formations, which were penetrated by the eight wells in the study area. The water saturation shows low values, while the hydrocarbon saturation is in a reverse relation, i.e., the hydrocarbon increases where the water saturation decreases. Different cross-plots such as Rho-PHIN, Rho-DTN, and M-N were used in lithological identification for the two studied formations (Saar and Qishn) in the studied wells. Formation evaluation and presentation forms of the obtained petrophysical parameters have frequently proven that the formations have high hydrocarbon saturation in this area and contain many pay zones. On of the main targets of this paper is to build a detailed 3D geological modeling of the Lower Cretaceous Sequence conducted through an integrated study.  相似文献   

14.
The methods of nuclear magnetic resonance(NMR)spectroscopy,mercury injection porosimetry(MIP),and gas-water relative permeability(GWRP)were used to reveal the pore structure and permeability characteristics of high-rank coal reservoirs in the Bide-Santang basin,western Guizhou,South China,to provide guidance for coalbed methane(CBM)exploration and exploitation and obtain direct insights for the development of CBM wells.The results indicate that the coal reservoirs in the study area are characterized by well-developed adsorption pores and poorly developed seepage pores.The bimodal NMR transverse relaxation time(T2)spectra and the mutation in the fractal characteristic of the MIP pore volume indicate poor connectivity between the adsorption pores and the seepage pores.As a result,the effective porosity is relatively low,with an average of 1.70%.The irreducible water saturation of the coal reservoir is relatively high,with an average of 66%,leading to a low gas relative permeability under irreducible water saturation.This is the main reason for the low recovery of high-rank CBM reservoirs,and effective enhanced CBM recovery technology urgently is needed.As a nondestructive and less time-consuming technique,the NMR is a promising method to quantitatively characterize the pores and fractures of coals.  相似文献   

15.
During 2003–2006, a pilot project of alternating water and CO2 injection was performed on a limited part of the Upper Miocene sandstone oil reservoir of the Ivani? Field. During the test period oil and gas recovery was significantly increased. Additionally 4,440 m3 of oil and 2.26 × 106 m3 of gas were produced. It has initiated further modelling of sandstone reservoirs in the Ivani? Field in order to calculate volumes available for CO2 injection for the purpose of increasing hydrocarbon production from depleted sandstone reservoirs in the entire Croatian part of the Pannonian Basin System. In the first phase, modelling was based on results of laboratory testing on the core samples. It considered applying analogies with world-known projects of CO2 subsurface storage and its usage to enhance hydrocarbon production. In the second phase, reservoir variables were analysed by variograms and subsequently mapped in order to reach lithological heterogeneities and to determine reliable average values of reservoir volumes. Data on porosity, depth and reservoir thickness for the “Gamma 3” and the “Gamma 4” reservoirs, are mapped by the ordinary kriging technique. Calculated volume of CO2 expressed at standard condition which can be injected in the main reservoirs of the Ivani? Field at near miscible conditions is above 15.5 billion m3.  相似文献   

16.
车镇凹陷古近系深层碎屑岩有效储层物性下限及控制因素   总被引：5，自引：1，他引：4  
王艳忠  操应长 《沉积学报》2010,28(4):752-761
综合运用物性、试油、压汞等资料,分别利用分布函数曲线法、测试法、试油法、束缚水饱和度法以及最小有效孔喉半径法,求取了车镇凹陷古近系深层有效储层物性下限,在此基础上,以孔隙度差值和渗透率差值作为对比参数,探讨了沉积作用、地层压力和成岩作用对深层有效储层发育的控制作用。车镇凹陷古近系深层碎屑岩有效储层孔隙度下限与深度的对数呈线性函数关系,渗透率下限与深度呈指数函数关系。三角洲前缘水下分流河道、河口坝微相砂体有效储层最发育、孔隙度差值和渗透率差值较好,而湖底扇、近岸水下扇、扇三角洲以及冲积扇砂砾岩体有效储层发育较少、孔隙度差值和渗透率差值较差;中强超压储层的有效储层百分含量、孔隙度差值和渗透率差值均好于常压—弱超压储层;中成岩A1期储层的有效储层百分含量、孔隙度差值和渗透率差值均好于中成岩A2、中成岩B期储层。总体上,沉积相带是深层有效储层发育的最主要控制因素,异常高压对有效储层发育的控制作用强于成岩作用,成岩作用对有效储层的影响受沉积相带和异常高压的控制,原始储集性能好且受异常高压保护的储层易于受溶解作用的改造形成优质有效储层。  相似文献   

17.
The main methods of coalbed methane(CBM) development are drainage and depressurization, and a precise prediction of coal reservoir pressure is thus crucial for the evaluation of reservoir potentials and the formulation of reasonable development plans. This work established a new reservoir pressure prediction model based on the material balance equation(MBE) of coal reservoir, which considers the self-regulating effects of coal reservoirs and the dynamic change of equivalent drainage area(EDA). According to the proposed model, the reservoir pressure can be predicted based on reservoir condition data and the actual production data of a single well. Compared with traditional reservoir pressure prediction models which regard EDA as a fixed value, the proposed model can better predict the average pressure of reservoirs. Moreover, orthogonal experiments were designed to evaluate the sensitivity of reservoir parameters on the reservoir pressure prediction results of this proposed model. The results show that the saturation of irreducible water is the most sensitive parameter, followed by Langmuir volume and reservoir porosity, and Langmuir pressure is the least sensitive parameter. In addition, the pressure drop of reservoirs is negatively correlated with the saturation of irreducible water and the Langmuir volume, while it is positively correlated with porosity. This work analyzed the reservoir pressure drop characteristics of the CBM wells in the Shizhuangnan Block of the Qinshui Basin, and the results show that the CBM reservoir depressurization can be divided into three types, i.e., rapidly drop type, medium-term stability type, and slowly drop type. The drainage features of wells were reasonably interpreted based on the comprehensive analysis of the reservoir depressurization type; the latter was coupled to the corresponding permeability dynamic change characteristics, eventually proving the applicability of the proposed model.  相似文献   

18.
含油气盆地的地质相、流体势、烃源灶是影响圈闭含油气性的决定性因素, 三者缺一不可。在各要素满足控藏临界条件下, 优相-低势-近源复合指数(FPSI) 越高, 圈闭含油气性越好。基于相-势-源复合控油气成藏机制开展物理模拟实验研究, 结果表明:“源”控制着油气成藏的物质来源, “相”控制着油气成藏的孔隙空间、“势”控制着油气成藏的运移动力, 当三者联合作用时能够形成油气藏。实验结果还表明, 圈闭外部(盖层)岩相和圈闭内部(储集层)岩相粒径差别越大, 越有利于油气在毛细管力作用下从细粒低孔渗的围岩之中进入到粗粒高孔渗的储集层之内聚集成藏, 临界条件是：圈闭外部围岩颗粒粒径较圈闭内部储集层颗粒粒径小2倍以上, 或外部毛细管力较之内部大2倍以上, 也即外部界面势能较内部高2倍以上;圈闭外部烃源岩含油气饱和度越高, 越有利油气进入圈闭内部储集层中聚集成藏, 临界条件是外部源岩的含油气饱和度达到和超过5％。  相似文献   

19.
伊通盆地岔路河断陷古近系为地堑式断陷盆地沉积,其储层主要为重力流成因的湖泊水下扇,具有物源近、堆积速率快、岩性复杂多变的特征,加之后期成岩作用的影响,造成这类砂体物性变异系数大,非均质程度高。储层内部含流体时,流体性质难以识别,易造成测井解释上油气水层的误判。为了能够应用常规测井资料评价此类油气储层,提高测井解释的成功率,通过综合分析本区储层岩性、物性和含油气性特征,结合试油结果建立了本区岩性、物性及含油气性解释模型。岔路河断陷测井解释参数交汇图版可以明显区分出气层、油层、气水同层、油水同层、水层和干层等不同的地层油气产状。图版显示:岔路河断陷产油气储层含油饱和度下限为20%,并且产气层比产油层具有更高的深浅双侧向电阻率差值;纯水层虽然具有较好的物性条件,但含油饱和度均小于20%;干层泥质体积分数均大于22%,总孔隙度小于10.5%,物性变差,一般为无效储层。  相似文献   

20.
致密砂岩储层是油气勘探的重点方向之一,由于致密砂岩储层具有低孔低渗、孔隙结构复杂、非均质性强和岩电参数变化等特点,在测井解释过程中不同于常规储层。Archie公式在致密砂岩地层中使用时,强非均质性导致岩电参数a、b、m和n会随着储层的变化而变化。针对苏里格西区盒8段致密砂岩储层提出利用变岩电参数建立饱和度模型。依据研究区盒8段储层25块岩心岩电实验分析发现胶结系数m与lgϕ呈二次函数关系、m与岩性系数a呈幂函数关系、束缚水饱和度Swb对饱和度指数n有较大的影响。因此,在对孔隙度、束缚水饱和度和孔隙结构指数等因素分析的基础上,综合各因素影响特征建立了变岩电参数的饱和度模型。结果表明,该方法相对传统Archie公式饱和度解释,模型精度更高,为解释复杂孔隙结构砂岩储层提供了一种有效预测方法。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号