共查询到20条相似文献，搜索用时 875 毫秒
1.
This work presents a frequency-domain method for estimating incident and reflected waves when normally incident waves’ propagating over a sloping beach in a wave flume is considered. Linear wave shoaling is applied to determine changes of the wave amplitude and phase due to variations of the bathymetry. The wave reflection coefficient is estimated using wave heights measured at two fixed wave gauges with a distance. The present model demonstrates a high capacity of estimating reflection and shoaling coefficients from synthetic wave-amplitude data. Sensitivity tests for the present model due to measurement errors of wave amplitudes and distance of two probes can more accurately predict the reflection coefficients. The measurement error of wave amplitude affects more significantly than measurement error of distance of two probes on calculating reflection coefficient of waves over a sloping bed. 相似文献
2.
A three-point method for estimating wave reflection is proposed to account for monochromatic oblique incident waves propagating over a sloping beach. The amplitudes of reflected wave and incident wave are separated using wave amplitudes measured at three fixed wave gauges with a distance. The applicability of the theory is verified by comparing the simulated results with the available theoretical, numerical and experimental results for the estimation of wave reflection. The sensitivity is also tested to provide a more accurate prediction of the reflection coefficient. 相似文献
3.
Zhu Liangsheng Sui Shifeng
Associate Professor South China Sea Institute of Oceanology Chinese Academy of Science Guangzhou Professor South China Sea Institute of Oceanology Chinese Academy of Science Guangzhou 《中国海洋工程》1997,(3)
Some researches have been made in this aspect.In the method by Walton Jr.(1992),incidentwaves are supposed to be the overlapping result of M component waves with different frequencies whichmay take different directions,the direction of incident waves should be available in advance,but in fact thedirection of incident waves is not available.In our study,incident waves are supposed to be composed ofM overlapping component waves with different frequencies,and different frequencies have different direc-tions.Based on the irregular wave reflection theory,the calculation formulas of wave direction,complexamplitude of incident waves,and complex amplitude of reflected waves in surface which are composed ofcomponent waves are derived by means of discrete Fourier transform.Then,the frequency spectra of inci-dent waves and reflected waves and the reflection coefficient of waves with corresponding frequencies areobtained.Verification of the method and the calculation results from in-situ measured data indicate thatt 相似文献
4.
《Coastal Engineering》1999,38(3):167-176
An existing 2D method for separating incident and reflected waves over a horizontal bed [Frigaard, P., Brorsen, M., 1995. A time domain method for separating incident and reflected irregular waves. Coastal Eng., 24, 205–215.] is modified to account for normally incident linear waves propagating over a bed with arbitrary 2D bathymetry. Linear shoaling is used to determine the amplitude and phase change between two measurement positions; thereafter the existing technique can be applied. Comparisons between the existing and modified methods are made using numerically simulated data. Errors in the reflection coefficient are found to be small for large reflection coefficients, but may become large if reflection is low. However, if an accurate assessment of the amplitude of the incident and reflected wave trains is required, the bathymetry must be accounted for in order to avoid significant errors (up to 90% for cases considered). 相似文献
5.
A physical parameter, μb, which was used to meet the forcing of primary short waves to be off-resonant before wave breaking, has been considered as an applicable parameter in the infra-gravity wave generation. Since a series of modulating wave groups for different wave conditions are performed to proceed with the resonant mechanism of infra-gravity waves prior to wave breaking, the amplitude growth of incident bound long wave is assumed to be simply controlled by the normalized bed slope, βb. The results appear a large dependence of the growth rate, α, of incident bound long wave, separated by the three-array method, on the normalized bed slope, βb. High spatial resolution of wave records enables identification of the cross-correlation between squared short-wave envelopes and infra-gravity waves. The cross-shore structure of infra-gravity waves over beaches presents the mechanics of incident bound- and outgoing free long waves with the formation of free standing long waves in the nearshore region. The wave run-up and amplification of infra-gravity waves in the swash zone appear that the additional long waves generated by the breaking process would modify the cross-shore structure of free standing long waves. Finally, this paper would further discuss the contribution of long wave breaking and bottom friction to the energy dissipation of infra-gravity waves based on different slope conditions. 相似文献
6.
Application of desingularized approach to water wave propagation over three-dimensional topography 总被引：1，自引：0，他引：1
A numerical approach based on desingularized boundary element method and mixed Eulerian–Lagrangian formulation [Zhang et al., 2006. Wave propagation in a fully nonlinear numerical wave tank: a desingularized method. Ocean Engineering 33, 2310–2331] is extended to solve the water wave propagation over arbitrary topography in a three-dimensional wave tank. A robust damping layer applicable for regular and irregular incident waves is employed to minimize the outgoing wave reflection back into the wave tank. Numerical results on the propagation of regular and irregular incident waves over the flat bottom and linear incident waves over an elliptical shoal show good concurrence with the corresponding analytical solutions and experimental data. 相似文献
7.
8.
Solitary wave evolution over a shelf including porous damping is investigated using Volume-Averaged Reynolds Averaged Navier–Stokes equations. Porous media induced damping is determined based on empirical formulations for relevant parameters, and numerical results are compared with experimental information available in the literature. The aim of this work is to investigate the effect of wave damping on soliton disintegration and evolution along the step for both breaking and non-breaking solitary waves. The influence of several parameters such as geometrical configuration (step height and still water level), porous media properties (porosity and nominal diameter) or solitary wave characteristics (wave height) is analyzed. Numerical simulations show the porous bed induced wave damping is able to modify wave evolution along the step. Step height is observed as a relevant parameter to influence wave evolution. Depth ratio upstream and downstream of the edge appears to be the more relevant parameter in the transmission and reflection coefficients than porosity or the ratio of wave height–water depth. Porous step also modifies the fission and the solitary wave disintegration process although the number of solitons is observed to be the same in both porous and impermeable steps. In the absence of breaking, porous bed triggers a faster fission of the incident wave into a second and a third soliton, and the leading and the second soliton reduces their amplitude while propagating. This decrement is observed to increase with porosity. Moreover, the second soliton is released before on an impermeable step. Breaking process is observed to dominate over the wave dissipation at the porous bottom. Fission is first produced on a porous bed revealing a clear influence of the bottom characteristics on the soliton generation. The amplitude of the second and third solitons is very similar in both impermeable and porous steps but they evolved differently due to the effect of bed damping. 相似文献
9.
Hsien-KuoCHANG Jin-ChengLIOU 《中国海洋工程》2004,18(3):371-380
This investigation examines long wave reflection and transmission induced by a sloping step. Bellman and Kalaba‘s (1959) invariant imbeddlng is introduced to find wave reflection. An alternative method matching both the surface elevation and its surface slope of each region at the junction is applied to the determination of wave reflection and transmission.The proposed methods are compared with the accurate numerical results of Porter and Porter (2000) and those of Mei (1983) for a vertical step. The wave reflection obtained for a mildly sloping step differs significantly from the result of Mei. The wave reflection is found to fluctuate owing to wave trapping for the ntild sloping step. The height and the face slope of the step are important for determining wave reflection and transmission coefficients. 相似文献
10.
11.
斜向和多向不规则波在斜坡堤上的平均越浪量的试验研究 总被引：4，自引：1，他引：3
通过三维物理模型试验研究了在斜坡堤上斜向和多向不规则波在非破碎条件下的平均越浪量与波浪参数及堤参数的关系.着重考察了波浪以小角度(0°~30°)斜向入射时平均越浪量的变化情况,肯定了多向波的越浪量在这一范围内有所谓“小角度斜向增加”的现象,但否定了单向波也具有这一现象.在考察波浪的方向分布影响时发现波浪斜向入射时多向波的越浪量往往要比单向波的大.比较了已有的相关研究成果,给出了适用于混凝土护面和扭工字块体护面斜坡堤上斜向和多向不规则波的平均越浪量的估算公式. 相似文献
12.
Separation of obliquely incident and reflected irregular waves by the Morlet wavelet transform 总被引：1，自引：0，他引：1
An existing 2D time-domain method for separating irregular incident and reflected waves by wavelet transform [Ma et al., 2010. A new method for separation of 2D incident and reflected waves by the Morlet wavelet transform. Coastal Eng., 57(6):597–603] is extended to account for obliquely incident irregular waves propagating over sloping bottoms. The linear shoaling and refraction coefficients are adopted to determine the amplitude and phase changes of waves. The optimal central frequency of the Morlet wavelet is determined by the minimum Shannon wavelet entropy. Numerical tests show that the present method can accurately separate waves over horizontal depths. For waves at sloping bottoms, however, the separation errors increase as bottom slope increases and are significant for waves with incident angle larger than π/3. 相似文献
13.
Experimental studies were conducted on a trapezoidal pendulum wave energy converter in regular waves. To obtain the incident wave height, the analytical method (AM) was used to separate the incident and reflected waves propagating in a wave flume by analysing wave records measured at two locations. The response amplitude operator (RAO), primary conversion efficiency and the total conversion efficiency of the wave energy converter were studied; furthermore, the power take-off damping coefficients corresponding to the load resistances in the experiment were also obtained. The findings demonstrate that the natural period for a pendulum wave energy converter is relatively large. A lower load resistance gives rise to a larger damping coefficient. The model shows relatively higher wave energy conversion efficiency in the range of 1.0?1.2 s for the incident wave period. The maximum primary conversion efficiency achieved was 55.5%, and the maximum overall conversion efficiency was 39.4%. 相似文献
14.
15.
单桩基础周围斜坡海床中的波致孔隙水压力响应与纯斜坡海床存在较大差异。为了解不同波高、波周期条件下,单桩基础周围波浪传播变形及其对斜坡海床孔压振荡响应的影响,在波浪水槽末端铺设了长6 m、坡度1∶16的斜坡砂床进行试验。通过改变桩身位置和波浪参数,测量斜坡段各处波面形态,采集单桩周围孔隙水压力,分析了桩身位置及波浪参数对斜坡海床孔压响应的影响。结果表明：相同入射波条件下,随距坡脚水平距离增加,波高、近底流速和桩周孔隙水压力幅值都随之增大;桩周孔隙水压力幅值分布规律为：桩前孔压幅值明显大于桩侧与桩后孔压幅值。当Keulegan-Carpenter数大于6时,随着波高和波周期增大,马蹄涡产生的负压区使得桩侧海床孔隙水压力与纯斜坡海床孔隙水压力差值迅速增加。 相似文献
16.
17.
This paper presents an analytical solution for scattering of oblique incident, small amplitude, monochromatic wave trains by a stationary rigid multi-layered objects with rectangular cross-section. The object is infinite long and consists of multilayers, which can be either solid or permeable. This paper extends the previous work by Hu and Liu [1] from normal incident wave condition with a special object configuration to oblique incident waves with multi-layered object. The present model is validated with several existing solutions for normal/oblique waves interacting with a single object; excellent agreement is observed. New numerical results are presented to investigate the effects of incidence angle on reflection, transmission and energy loss coefficients for a combined floating and bottom-mounted permeable breakwater. A new floating board-cage breakwater is developed from the present model and its solutions are discussed in detail. A computer program, AWAS-P, has been updated so that it is applicable for both oblique and normal incident waves, while the object is multi-layered. 相似文献
18.
Zuo Qihua Yang Zhengji .
Senior Engieer River Harbour Department Nanjing Hydraulic Research Institute Nanjing 《中国海洋工程》1996,(3)
- The variation of the amplitude of waves with varying incident angles when waves propagate through a typical approach channel is discussed by a numerical calculation method, the result of which shows that the influence of the channel on wave propagation is obvious. When the wave propagation direction is in coincidence with the channel axis, the wave amplitude ratio will decrease with the increase of propagation distance. When the incident angle is 15 - 30 , there appears an area of larger wave amplitude ratio on the side slope facing the waves, but at the another side, the wave amplitude ratio is generally small, indicating that the channel has a shielding effect. When waves propagate across the channel perpendicularly, the wave amplitude ratio can be calculated with the shallow water coefficient. 相似文献
19.
A numerical model for wave propagation in a harbour is verified by use of physical models.The extended time-dependent mild slope equation is employed as the governing equation,and the model is solved by use of ADI method containing the relaxation factor.Firstly,the reflection coefficient of waves in front of rubble-mound breakwaters under oblique incident waves is determined through physical model tests,and it is regarded as the basis for simulating partial reflection boundaries of the numerical model.Then model tests on refraction,diffraction and reflection of waves in a harbour are performed to measure wave height distribution.Comparative results between physical and numerical model tests show that the present numerical model can satisfactorily simulate the propagation of regular and irregular waves in a harbour with complex topography and boundary conditions. 相似文献
20.
A third-order perturbation approximation for the partial reflection from a vertical wall is presented in this paper. The wave parameters are expressed in terms of the amplitude of incident waves. The reflection coefficient is defined as the ratio of the height of reflected waves to incident waves. The numerical results demonstrate the significant influences of reflected coefficient on the wave profile and wave frequency bifurcation. For example, the critical angle of wave frequency bifurcation with partial reflection is about 7.5 degrees, not 21 degrees as reported previously for fully reflection. 相似文献