首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 387 毫秒
1.
The Plio-Pleistocene stratigraphic record of the Peri-Adriatic basin (eastern central Italy) is well exposed along the uplifted western margin of the basin and consists of a series of coarse-grained slope canyon fills encased in a thick succession of hemipelagic mudstones. This study deals with the detailed sedimentology, stratal architecture, and sequence-stratigraphic interpretation of two of these submarine canyon-fills (namely CMC1 and CMC2) exposed at Colle Montarone. These strata contain widespread evidence of gravity-driven sedimentation processes, with high- and low-density turbidity currents, slumps and cohesive debris flows being responsible for most of the sediment transport and deposition. Beds are organised into four recurrent lithofacies, each corresponding to a specific deep-water depositional element: (i) clast-supported conglomerates (channel complexes); (ii) thin-bedded sandstones and mudstones (levee-overbank); (iii) very thinly-bedded mudstones (tributary channels); (iv) pebbly mudstones and chaotically bedded mudstones (mass-transport complexes).  相似文献   

2.
Bonanza Canyon is a complex canyon system on the slope from the intermittently glaciated Grand Bank on the south side of Orphan Basin. A 3D seismic reflection volume, 2D high-resolution seismic reflection profiles and ten piston cores were acquired to study the evolution of this canyon system in relation to glacial processes on the continental shelf and the effects of different types of turbidity currents on the development of deep water channels. Mapped reflector surfaces from the 3D seismic volume show that the Bonanza Canyons developed in a depression created by a large submarine slide of middle Pleistocene age, coincident with the onset of glacigenic debris flows entering western Orphan Basin. Two 3–5 km wide, flat-floored channels were cut into the resulting mass-transport deposit and resemble catastrophic glacial meltwater channels elsewhere on the margin. Both channels subsequently aggraded. The eastern channel A became narrower but maintained a sandy channel floor. The western channel, B, heads at a spur on the continental slope and appears to have been rather passively draped by muds and minor sands that have built 1500-m wave length sediment waves.Muddy turbidites recorded by piston cores in the channel and on the inter-channel ridges are restricted to marine isotope stage (MIS) 2 and were deposited from thick, sheet-like, and sluggish turbidity current derived from western Orphan Basin that resulted in aggradation of the channels and inter-channel ridges. Sandy turbidites in channels and on inner levees were deposited throughout MIS 2–3 and were restricted to the channels, locally causing erosion. Some coincide with Heinrich events. Channels with well-developed distributaries on the upper slope more readily trap the sediments on Grand Bank to form sandy turbidity currents. Channel B dominated by muddy turbidity currents has wide and relatively smooth floor whereas channel A dominated by sandy turbidity currents has a sharp geometry.  相似文献   

3.
The deep lacustrine gravity-flow deposits are widely developed in the lower Triassic Yanchang Formation, southeast Ordos Basin, central China. Three lithofacies include massive fine-grained sandstone, banded sandstone, and massive oil shale and mudstone. The massive fine-grained sandstones have sharp upper contacts, mud clasts, boxed-shaped Gamma Ray (GR) log, but no grading and Bouma sequences. In contrast, the banded sandstones display different bedding characteristics, gradational upper contacts, and fine-upward. The massive, fine-grained sandstones recognized in this study are sandy debrites deposited by sandy debris flows, while the banded sandstones are turbidites deposited by turbidity currents not bottom currents. The sediment source for these deep gravity-flow sediments is a sand-rich delta system prograding at the basin margin. Fabric of the debrites in the sandy debris fields indicates initial formation from slope failure caused by the tectonic movement. As the sandy debris flows became diluted by water and clay, they became turbidity currents. The deep lacustrine depositional model is different from the traditional marine fan or turbidite fan models. There are no channels or wide lobate sand bodies. In the lower Triassic Yanchang Formation, layers within the sandy debrites have higher porosity (8–14%) and permeability (0.1–4 mD) than the turbidites with lower porosity (3–8%) and permeability (0.04–1 mD). Consequently, only the sandy debrites constitute potential petroleum reservoir intervals. Results of this study may serve as a model for hydrocarbon exploration and production for deep-lacustrine reservoirs from gravity-flow systems in similar lacustrine depositional environments.  相似文献   

4.
Quantifying the characteristics of the turbidity currents that are responsible for the erosion, lateral migration and filling of submarine channels maybe useful for predicting the distribution of lithofacies in channel fill and levee reservoirs. This paper uses data from a well-studied submarine channel in Amazon Fan in an attempt to reconstruct the velocity, thickness, concentration, duration, recurrence rates and vertical structure of turbidity currents in this long sinuous channel. Estimates of flow conditions are derived from the morphology of the channels and the characteristics of the deposits within them. In particular, the availability of information on the sediment distribution with respect to the channel topography at the time of deposition allows for insights into the vertical structure of the flow, a key property that has been so far poorly understood. Integration of flow constraints from well and seismic data or from detailed analysis of outcrop with numerical flow models is a critical step toward a complete understanding of the flow and associated deposits. Turbidity currents in sinuous submarine channels, exemplified by Amazon Channel, are found to last for tens of hours and occur on a regular, quasi-annual basis. Model results suggest that these flows had, on average, velocities ranging from 2 to 4 m/s in the canyon/upper fan which decreased to 0.5–1 m/s in the lower fan, travelling in excess of 800 km. The model turbidity currents were subcritical over most of the channel length, indicating a low degree of water entrainment and low rate of deceleration down the channel. The formation of such long, sinuous channels is intrinsically associated with frequent, long-duration, subcritical turbidity currents carrying a silt-dominated sediment load.  相似文献   

5.
The deposits of subaqueous sediment gravity flows can show evidence for abrupt and/or progressive changes in flow behaviour making them hard to ascribe to a single flow type (e.g. turbidity currents, debris flows). Those showing evidence for transformation from poorly cohesive and essentially turbulent flows to increasingly cohesive deposition with suppressed turbulence ‘at a point’ are particularly common. They are here grouped as hybrid sediment gravity flow deposits and are recognised as key components in the lateral and distal reaches of many deep-water fan and basin plain sheet systems. Hybrid event beds contain up to five internal divisions: argillaceous and commonly mud clast-bearing sandstones (linked debrite, H3) overlie either banded sandstones (transitional flow deposits, H2) and/or structureless sandstones (high-density turbidity currents, H1), recording longitudinal and/or lateral heterogeneity in flow structure and the development of turbulent, transitional and laminar flow behaviour in different parts of the same flow. Many hybrid event beds are capped by a relatively thin, well-structured and graded sand–mud couplet (trailing low-density turbulent cloud H4 and mud suspension fallout H5). Progressive bed aggradation results in the deposits of the different flow components stacked vertically in the final bed. Variable vertical bed character is related to the style of up-dip flow transformations, the distance over which the flows can evolve and partition into rheological distinct sections, the extent to which different flow components mutually interact, and the rate at which the flows decelerate, reflecting position (lateral versus distal) and gradient changes. Hybrid beds may inherit their structure from the original failure, with turbidity currents outpacing debris flows from which they formed via partial flow transformation. Alternatively, they may form where sand-bearing turbidity currents erode sufficient substrate to force transformation of a section of the current to form a linked debris flow. The incorporation of mud clasts, their segregation in near-bed layers and their disintegration to produce clays that can dampen turbulence are inferred to be key steps in the generation of many hybrid flow deposits. The occurrence of such beds may therefore identify the presence of non-equilibrium slopes up-dip that were steep enough to promote significant flow incision. Where hybrid event beds dominate the entire distal fan stratigraphy, this implies either the system was continually out of grade in order to freight the flows with mud clasts and clays, or the failure mechanism and transport path repeatedly allowed transmission of components of the initial slumps distally. Where hybrid beds are restricted to sections representing fan initiation, or occur more sporadically within the fan deposits, this could indicate shorter episodes of disequilibrium, due to an initial phase of slope re-adjustment, or intermittent tectonically or gravity-driven surface deformation or supply variations. Alternatively, changes between conventional and hybrid event beds may record changes in the flow generation mechanism through time. Thus the vertical distribution of hybrid event beds may be diagnostic of the wider evolution of the fan systems that host them.  相似文献   

6.
Most submarine canyons are erosive conduits cut deeply into the world’s continental shelves through which sediment is transported from areas of high coastal sediment supply onto large submarine fans. However, many submarine canyons in areas of low sediment supply do not have associated submarine fans and show significantly different morphologies and depositional processes from those of ‘classic’ canyons. Using three-dimensional seismic reflection and core data, this study contrasts these two types of submarine canyons and proposes a bipartite classification scheme.The continental margin of Equatorial Guinea, West Africa during the late Cretaceous was dominated by a classic, erosional, sand-rich, submarine canyon system. This system was abandoned during the Paleogene, but the relict topography was re-activated in the Miocene during tectonic uplift. A subsequent decrease in sediment supply resulted in a drastic transformation in canyon morphology and activity, initiating the ‘Benito’ canyon system. This non-typical canyon system is aggradational rather than erosional, does not indent the shelf edge and has no downslope sediment apron. Smooth, draping seismic reflections indicate that hemipelagic deposition is the chief depositional process aggrading the canyons. Intra-canyon lateral accretion deposits indicate that canyon concavity is maintained by thick (>150 m), dilute, turbidity currents. There is little evidence for erosion, mass-wasting, or sand-rich deposition in the Benito canyon system. When a canyon loses flow access, usually due to piracy, it is abandoned and eventually filled. During canyon abandonment, fluid escape causes the successive formation of ‘cross-canyon ridges’ and pockmark trains along buried canyon axes.Based on comparison of canyons in the study area, we recognize two main types of submarine canyons: ‘Type I’ canyons indent the shelf edge and are linked to areas of high coarse-grained sediment supply, generating erosive canyon morphologies, sand-rich fill, and large downslope submarine fans/aprons. ‘Type II’ canyons do not indent the shelf edge and exhibit smooth, highly aggradational morphologies, mud-rich fill, and a lack of downslope fans/aprons. Type I canyons are dominated by erosive, sandy turbidity currents and mass-wasting, whereas hemipelagic deposition and dilute, sluggish turbidity currents are the main depositional processes sculpting Type II canyons. This morphology-based classification scheme can be used to help predict depositional processes, grain size distributions, and petroleum prospectivity of any submarine canyon.  相似文献   

7.
Previously undocumented, migrating submarine canyons have developed in the Pearl River Mouth Basin along the northern continental margin of the South China Sea from the middle Miocene to present. A grid of high-resolution, 2-D multi-channel seismic profiles calibrated by borehole information permits documentation of these northeastward migrating submarine canyons, as the result of the interplay of gravity flows and bottom currents. The modern canyons have lengths of 30–60 km, widths of 1–5.7 km, and relief of 50–300 m in water depths of 450–1500 m. Buried ancient submarine canyon successions were originally eroded by basal erosional discontinuities and partially filled by canyon thalweg deposits. These are overlain by lateral inclined packages and hemipelagic drape deposits. Basal erosional discontinuities and thalweg deposits are probably created principally by turbidity currents and filled with turbidites. Lateral inclined packages likely were formed by along-slope bottom currents. The evolution of these migrating submarine canyons reveals that northeastward bottom currents have consistently occurred at least from the middle Miocene to present in the study area. It might further imply that thermohaline intermediate water circulation of the South China Sea has been anti-cyclonic from the middle Miocene to present. The initiation of migrating submarine canyons possibly signals commencement of strong bottom currents after the middle Miocene in the South China Sea. The intensification of bottom currents also possibly may reflect shoaling of the major ocean seaways and increased vigor in oceanic circulation forced by global cooling after the middle Miocene.  相似文献   

8.
 Sedimentary processes in the Stromboli Canyon and in the Marsili Basin are studied on the basis of side-scan sonographs. The basin margins are characterized by slump scars, gullies, channels, and large debrites on the Calabrian slope and by straight chutes of fast downslope sediment transport and blocky–hummocky avalanche deposits on the flanks of the Stromboli volcano. In the Stromboli Canyon and in minor deep-sea channels, sediment transport by turbidity currents generates sediment waves. Between the basin margins and the abyssal plain, the outcropping volcanic basement traps part of the sediment coming from the marginal areas. The abyssal plain is characterized by low relief lobes and ponded sediments.  相似文献   

9.
Various transformation mechanisms can generate turbidity currents from subaqueous debris flows. Different transformation mechanisms have been described and interpreted in the past from laboratory experiments and from deposits, but the two approaches have not generally been linked. This has made the genetic interpretation and comparison of deposits difficult. In this paper a generic classification scheme of debrite–turbidite couplets is proposed based on transformation mechanisms inferred from laboratory experiments. Five different flow types (called A–E herein) and their resulting deposits are detailed, but they are all part of a continuous spectrum, and a mixture of types is likely to be found in the field. Type A flows are strong, dense debris flows that undergo little transformation. Their deposit will be a debrite overlain by a thin turbidite, which is separated from it by a clear grain size break. Type B flows are weaker and can develop waves at the debris flow-turbidity current interface. The deposit will be a debrite with a wavy top overlain by a turbidite that is thicker than for type A flows. For type C flows, the interfacial waves will grow so much that the debris flow disintegrates into separate parts. The deposit will consist of debrite lenses encased in a turbidite. Type D flows will undergo even more mixing than type C flows so that the debrite parts will be mixed. Their deposit will be a turbidite with laterally varying areas of debrite characteristics near the bed. Type E flows will be so transformed that the debris flow character has disappeared and the flow is a turbidity current with high sediment concentration. The deposit will be largely turbiditic. The flow types and deposits will be illustrated with some examples from two field areas: the Polish Carpathians and the French Maritime Alps.  相似文献   

10.
Holocene sand layers cored from the central Aleutian Trench are dominated by volcaniclastic debris, and the only likely source is the central Aleutian volcanic arc. This creates something of an enigma because bathymetric obstructions seemingly prevent direct delivery of sediment via transverse canyons or channels. Turbidity currents are funneled through submarine canyons on the upper trench slope, but the flows become unconfined as they cross the midslope Aleutian Terrace. Evidently, the turbid flows maintain high enough velocities to climb over the trench-slope break; acceleration down the lower trench slope then allows forearc bypassing to occur without the aid of through-going channels.  相似文献   

11.
The frequency of turbidity currents in Bute Inlet and Knight Inlet (British Columbia, Canada) was monitored. A prototype instrument (turbidity event detector) was deployed adjacent to prominent incised sea-floor channels. Approximately 25–30 turbidity currents occur annually. They appear closely correlated to periods of higher river discharge into the heads of the fjords. Two peaks in both discharge and turbidity current fequency occur, one in response to snow melt in late June–early July, the other to glacier melt in August. Virtually no turbidity currents were observed in winter. River mouth bars, channel deposits, and other deltaic sediments build up during lower discharge periods and are swept onto the steep delta front and into subaqueous channels, along with bedload, during floods.  相似文献   

12.
等深流影响的水道沉积体系的沉积特征及其沉积过程是当前深水沉积学研究的热点、难点和前沿科学问题,但研究程度较为薄弱。该文以北礁凹陷上新统（地震反射T20?T30）为研究对象,利用覆盖北礁凹陷局部的三维地震资料,采用均方根属性、相干属性、时间域构造,再结合地震切片等方法,研究北礁凹陷深水区上新统斜交斜坡（走向）的特殊水道沉积体系特征及其沉积过程。研究发现,该水道沉积体系分为早、晚两期,早期发育水道和片状、扇状溢堤沉积,晚期仅发育水道和片状溢堤沉积,其中扇状溢堤沉积仅发育在水道右侧弯曲处,片状溢堤沉积仅分布在水道左侧,水道始终与区域斜坡斜交,水道对称分布且无明显迁移现象。结合该时期北礁凸起发育等深流相关的丘状漂积体和环槽,认为该水道沉积体系特殊的形态主要受控于等深流与浊流交互作用的沉积结果:浊流流经水道,其上覆浊流溢出水道,形成溢岸浊流,在水道左侧,该溢岸浊流与等深流发生相向运动,被等深流“吹拂”到单侧,大面积分布,延伸千米,形成片状溢堤沉积;而在水道弯曲处（右侧）,溢岸浊流与等深流发生相对运动,抑制溢岸浊流进一步扩展,形成相对小范围扇状溢堤沉积,该沉积结果与前人水槽实验结果相一致。  相似文献   

13.
Multibeam sonar data, acoustic sub-bottom profiles and box cores were used to study the activity of submarine canyons and fans near the city of Les Escoumins, on the North Shore of the Lower St. Lawrence Estuary (Eastern Canada). The multibeam data were used to generate a high-resolution digital terrain model that reveals the presence of a large number of canyons and fans along the northern slopes of the Laurentian Channel. This paper focuses on two of the larger canyons, and their associated submarine fans. The sub-bottom profiles on the fans reveal high-amplitude reflections at the sediment/water interface and near the seafloor surface, indicating the occurrence of layers of coarse material. A turbidite was observed in a box core sampled in one of the fans, confirming the nature of the coarse layer. Geophysical and sedimentological data indicate that the canyons and fans play an important role in transferring coastal sandy sediments to the deeper marine environments by longshore drift-initiated turbidity flows, and thereby contribute to the negative sediment budget along the coast. The morphology of the canyons indicates that they were produced by a combination of erosive turbidity flows and retrogressive failures. The two box cores sampled on the fans reveal a recent (~last 60 years) quasi-exponential increase in sand content near the surface of the cores, possibly reflecting recent deforestation and/or increased coastal erosion.  相似文献   

14.
Fine-grained sediments from the Late Triassic Yanchang Fm. in the Ordos Basin (central China) were studied by core analysis and geophysical logging. Part of the mudstones in this formation are stratified, part of them are unstratified; the various mudstones can be subdivided into eight types on the basis of their structures and textures. They represent a variety of environments, ranging from delta fronts and subaqueous fans to deep-water environments. Part of the sediments were reworked and became eventually deposited from subaqueous gravity flows, such as mud flows, turbidity currents and hyperpycnal flows that easily developed on the clay-rich deltaic slopes. The sediments deposited by such gravity flows show abundant soft-sediment deformation structures. Understanding of such structures and recognition of fine-grained sediments as gravity-flow deposits is significant for the exploration of potential hydrocarbon occurrences. Because fine-grained deposits become increasingly important for hydrocarbon exploration, and because the sediments in the lacustrine Yanchang Formation were deposited by exactly the same processes that play a role in the accumulation of deltaic and prodeltaic fine-grained sediments, the sedimentological analysis provided here is not only important for the understanding of deep lacustrine sediments like the Yanchang Formation, but also for a better insight into the accumulation of fine-grained prodeltaic deep-marine sediments and their potential as hydrocarbon source rocks and reservoir rocks.  相似文献   

15.
Parallel laminated, graded, and homogeneous muds of turbidity current origin are the predominant facies in the non-fan slope-centered Ulleung marginal basin during the last glacial period. Dilute turbidity currents were probably generated from slumps, slides, and debris flows on the slope. A mid-slope core contains poorly sorted mud-clast muds of debris flow origin. During the period of 75,000 and 10,000 years BP, turbidity currents occurred approximately every 125 years, each depositing about 0.5 km3 of mud with an accumulation rate of up to 40 cm/103 years. The basin was largely suboxic with a rare incursion of bottom currents.  相似文献   

16.
Hans Nelson 《Marine Geology》1976,22(2):129-155
The asymmetrical Astoria Fan (110 × 180 km) developed off the Columbia River and Astoria submarine canyon during the Pleistocene. Morphology, stratigraphy, and lithology have been outlined for a Pleistocene turbidite, and a Holocene hemipelagic sedimentary regime to generate geologically significant criteria for comparison with ancient equivalent deposits. Both gray silty clay of the Late Pleistocene and olive-gray clay of the Early Holocene are interrupted by turbidites. The few deeply incised fan valleys of the more steeply sloping upper fan contain thick, muddy and very poorly sorted sand and gravel beds that usually have poorly developed internal sedimentary structures. The numerous shallower fan valleys and distributaries of the flatter middle and lower fan contain thick, clean, and moderately sorted medium to fine sands that are vertically graded in texture, composition and well-developed internal sedimentary structures. Tuffaceous turbidites (containing Mazama ash, 6600 B.P.) can be traced as thick deposits (ca. 30–40 cm) throughout the Astoria Channel system and as thin correlative interbeds (ca. 1–2 cm) in interchannel areas. Similarly, sand/shale ratios are high throughout the fan valleys and the middle and lower fan areas of distributaries, but are low in the upper-fan interchannel areas.These depositional trends indicate that high-density turbidity currents carry coarse traction loads that remain confined in upper but not lower fan valleys. Fine debris selectively sorts out from channelized flows into overbank suspension flows that spread over the fan and deposit clayey silt. A high content of mica, plant fragments, and glass shards (if present) characterizes deposits of the overbank flows, a major process in the building of upper fan levees and interchannel areas.In the Late Pleistocene, turbidity currents funneled most coarse-grained debris through upper channels to depositional sites in middle and lower fan distributaries that periodically shifted, anastomosed and braided to spread sand layers throughout the area. At this time, depositional rates were many times greater (>50 cm/1000 years) than in the Holocene (8 cm/1000 years).During the Holocene rise of sea level, the shoreline shifted, the Columbia River sediment was trapped, and turbidity-current activity slackened from one major event per 6 years in the Late Pleistocene, to one per 1000 years in the Early Holocene, to none since the Mt. Mazama eruption (ca. 6600 B.P.). Turbidites became muddier and deposited as thick beds within main channels, in part explaining Holocene deposition rates three times greater there (25 cm/1000 years) than in interchannel regions. Turbid-layer debris, funneled through channel systems and trapped from flows off the continental terrace, also contributed to rapid sedimentation in valleys; however, less than 2% of the suspended sediment load of the Columbia River has been trapped in fan valleys during the Holocene.By the Late Holocene, continuous particle-by-particle deposition of hemipelagic clay with a biogenous coarse fraction was the predominant process on the fan. These hemipelagites contain progressively more clay size and less terrigenous debris offshore, and are finer grained, richer in planktonic tests and dominated by radiolarians compared to the foraminiferal-rich Pleistocene clays. The hemipelagic sedimentation of interglacial times, however, is insignificant compared to turbidite deposition of glacial times.  相似文献   

17.
南海礼乐盆地海底麻坑地貌及成因分析   总被引：1，自引：0，他引：1  
本文基于高分辨率多波束测深和浅地层剖面数据，首次对南海礼乐盆地南部坳陷海底麻坑进行了系统的识别研究。共识别出各类麻坑81个，其中麻坑直径最大约2.4 km，坑深最大约157 m。麻坑种类多样:按平面形态主要分为圆形、椭圆形、拉长形和新月形麻坑；按组合方式分为孤立麻坑、链状麻坑和复合麻坑；按直径分为正常麻坑和大型麻坑。区域内发育多条大型海底峡谷，峡谷侵蚀引起两侧地层稳定性降低，气体储层遭受破坏，泄露的气体沿断层或气烟囱等喷发出海底形成麻坑。而因麻坑生成时剥蚀的沉积物质与周围水体混合并逐渐发展成浊流，在一定程度上促进海底峡谷向下延伸。研究区内单个麻坑的平面形态最初为圆形或椭圆形，之后由于重力流和峡谷侵蚀的影响，逐渐发展成拉长形或新月形，麻坑之间也会发生组合形成复合麻坑。链状麻坑与冲沟的形成联系密切，沿垂直于等深线方向展布的链状麻坑在重力流的冲刷下，发育成底部平坦的麻坑冲沟。对比分析全球其他海域麻坑，发现海底麻坑尺寸与水深关系密切，在深水区域更容易发育大型麻坑。  相似文献   

18.
超临界浊流影响下的周期阶坎广泛分布在南海东北部台西南盆地的西澎湖峡谷中。由于频繁的构造活动, 常年的台风影响, 以及来自中国台湾河流的大量沉积物供给, 导致这个区域的浊流活动经常发生。本文利用高分辨率的地貌资料, 对西澎湖峡谷发育的23个净侵蚀周期阶坎和10个净沉积周期阶坎进行了形态的定量分析, 并且统计了流经这些周期阶坎的浊流流速。结果显示, 浊流在流经净侵蚀周期阶坎过程中的速度有明显突变, 而在净侵蚀到净沉积周期阶坎的过程中速度也发生了明显的降低, 前者由峡谷中的坡折带导致, 后者则是由限制性环境到非限制性环境的转变造成的。此外, 净沉积周期阶坎主要分布于靠近峡谷口外的西南侧, 这是由于科氏力对浊流影响的结果。研究此区域周期阶坎的形态特征和形成机制能够帮助我们更好地理解海底地形地貌与浊流的相互关系, 对于理解峡谷中的地貌演化具有重要意义。  相似文献   

19.
High-resolution physical stratigraphy and detailed facies analysis have been carried out in the foredeep turbidites of Annot Sandstone in the Peïra Cava basin (French Maritime Alps) in order to characterize the relationship between facies and basin morphology. Detailed correlation patterns are evidence of a distinction between a southern bypass-dominated region, coincident with a channel-lobe transition and a north-eastern depositional zone, represented by sheet-like basin plain. These depositional elements are characterized by three main groups of beds related to the downcurrent evolution of bipartite flows. These facies groups are: 1) pebbly coarse-grained massive sandstones with rip-up mudstone clasts and impact mudstone breccias (Type I and II beds) deposited by basal dense flows, 2) coarse-grained massive sandstone overlain by tractive structures (Type III and IV beds) indicating the bypass of overlying turbulent flows and 3) massive medium-grained and fine-grained laminated sandstones related to the deposition of high and low density turbidity currents (Type V and VI beds). Ponding and reflection processes, affecting the upper turbulent flows, can characterize all type beds, but especially the beds of the third group. As described in other confined basins of the northern Apennines (Italy), the lateral and vertical distribution of these type of beds, together with other important sedimentary characteristics, - such as the sandstone/mudstone ratio, bed thicknesses, amalgamation surfaces and paleocurrents - reveal that the deposition of the Annot Sandstone in the Peïra Cava basin was controlled by an asymmetric basin with a steep western margin. This margin favored, on the one hand, basal dense flow decelerations and impacts, as well as bypass and deflection of the upper turbulent flows towards the north east.  相似文献   

20.
Here we present results from a suite of laboratory experiments that highlight the influence of channel sinuosity on the depositional mechanics of channelized turbidity currents. We released turbidity currents into three channels in an experimental basin filled with water and monitored current properties and the evolution of topography via sedimentation. The three channels were similar in cross-sectional geometry but varied in sinuosity. Results from these experiments are used to constrain the run-up of channelized turbidity currents on the outer banks of moderate to high curvature channel bends. We find that a current is unlikely to remain contained within a channel when the kinetic energy of a flow exceeds the potential energy associated with an elevation gain equal to the channel relief; setting an effective upper limit for current velocity. Next we show that flow through bends induces a vertical mixing that redistributes suspended sediment back into the interiors of depositional turbidity currents. This mixing counteracts the natural tendency for suspended sediment concentration and grain size to stratify vertically, thereby reducing the rate at which sediment is lost from a current via deposition. Finally, the laboratory experiments suggest that turbidity currents might commonly separate from channel sidewalls along the inner banks of bends. In some cases, sedimentation rates and patterns within the resulting separation zones are sufficient to construct bar forms that are attached to the channel sidewalls and represent an important mechanism of submarine channel filling. These bar forms have inclined strata that might be mistaken for the deposits of point bars and internal levees, even though the formation mechanism and its implications to channel history are different.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号