共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
Dynamics of large-truncated mooring systems coupled with a catenary moored semi-submersible 总被引：2，自引：2，他引：0
With the floating structures pushing their activities to the ultra-deep water,model tests have presented a challenge due to the limitation of the existing wave basins.Therefore,the concept of truncated mooring system is implemented to replace the full depth mooring system in the model tests,which aims to have the same dynamic responses as the full depth system.The truncated mooring system plays such a significant role that extra attention should be paid to the mooring systems with large truncation factor.Three different types of large truncation factor mooring system are being employed in the simulations,including the homogenously truncated mooring system,non-homogenously truncated mooring system and simplified truncated mooring system.A catenary moored semi-submersible operating at 1000 m water depth is presented.In addition,truncated mooring systems are proposed at the truncated water depth of 200 m.In order to explore the applicability of these truncated mooring systems,numerical simulations of the platform’s surge free decay interacting with three different styles of truncated mooring systems are studied in calm water.Furthermore,the mooring-induced damping of the truncated mooring systems is simulated in the regular wave.Finally,the platform motion responses and mooring line dynamics are simulated in irregular wave.All these simulations are implemented by employing full time domain coupled dynamic analysis,and the results are compared with those of the full depth simulations in the same cases.The results show that the mooring-induced damping plays a significant role in platform motion responses,and all truncated mooring systems are suitable for model tests with appropriate truncated mooring line diameters.However,a large diameter is needed for simplified truncated mooring lines.The suggestions are given to the selection of truncated mooring system for different situations as well as to the truncated mooring design criteria. 相似文献
3.
等效水深截断是混合模型试验中非常重要的一步,合理的截断方案是模型试验成功的前提。现有的研究大多忽略对平台转动的考虑,该文在静态相似准则的基础上增加对平台转动的考虑,推导了系泊系统回复力和转矩的计算公式,建立了满足静态一致性的目标函数,进而采用粒子群算法进行等效水深截断优化设计。以某深水半潜式平台为例,首先在不考虑转动的情况下对其系泊系统进行等效截断,研究发现截断水深的变化对转矩的优化结果影响较大,从而证明了平台转动是应该考虑的。其次在考虑转动的情况下对系泊系统进行等效截断,通过水动力软件验证所优化的结果,证明该方法的可行性,为后续的等效水深截断优化设计的研究提供参考。 相似文献
4.
Qiao Dong-sheng Yin Li Yan Jun Tang Wei Ning De-zhi Li Bin-bin Ou Jin-ping 《中国海洋工程》2021,35(5):700-711
The maximum predicting error of the commonly used passive truncated mooring system method may reach 30% due to the difference of dynamic characteristics between the truncated and full-depth mooring line. In this paper, the experimental strategy called three-parameter (displacement, velocity and acceleration) active control method at the truncated point of mooring line is established to implement the synchronous equivalent of motion and force, and the realization of active truncated mooring system for model test is studied theoretically. The influences of three-parameter and one-parameter (displacement) active control strategies on the compensation effects are compared by numerical study. The results show that the established three-parameter active control method can feasibly realize the static and dynamic equivalent of truncated and full-depth mooring system, laying a good foundation for the following physical model test of active truncated mooring system.
相似文献5.
The responses of a spar constrained by slack mooring lines to steep ocean waves and tensions in the mooring lines are simulated using two different numerical schemes: a quasi-static approach (SMACOS) and a coupled dynamic approach (COUPLE). The two approaches are the same in computing wave loads on the structure. Their difference is in modeling dynamic forces of mooring lines; that is the dynamic forces are included in the computation of COUPLE but neglected in SMACOS. The numerical simulation is examined against the laboratory measurements of the JIP Spar in a water depth of 318 m. The dynamic coupling effects between the JIP Spar and its mooring lines in different water depths (318, 618 and 1018 m) are investigated by the comparison of numerical simulations obtained using the quasi-static and coupled dynamic approaches. It is found that the damping of mooring lines reduces the slow-drift surge and pitch of the Spar, especially in deep water. The reduction in the amplitude of slow-drift surge can reach about 10% in a water depth of 1018 m. The tension in mooring lines may greatly increase in the wave frequency range when dynamic forces in mooring lines are considered. The mooring-line tension in the wave frequency range predicted by the coupled dynamic approach can be eight times as great as the corresponding prediction by the quasi-static approach in a water depth of 1018 m. This finding may have important implications for the estimation of the fatigue strength and life span of the mooring lines deployed in deep water oceans. 相似文献
6.
A.K. AgarwalA.K. Jain 《Ocean Engineering》2003,30(4):487-516
Many innovative floating offshore structures have been proposed for cost effectiveness of oil and gas exploration and production in water depths exceeding one thousand meters in recent years. One such type of platform is the offshore floating Spar platform. The Spar platform is modelled as a rigid body with six degrees-of-freedom, connected to the sea floor by multi-component catenary mooring lines, which are attached to the Spar platform at the fairleads. The response dependent stiffness matrix consists of two parts (a) the hydrostatics provide restoring force in heave, roll and pitch, (b) the mooring lines provide the restoring force which are represented here by nonlinear horizontal springs. A unidirectional regular wave model is used for computing the incident wave kinematics by Airy’s wave theory and force by Morison’s equation. The response analysis is performed in time domain to solve the dynamic behavior of the moored Spar platform as an integrated system using the iterative incremental Newmark’s Beta approach. Numerical studies are conducted for sea state conditions with and without coupling of degrees-of-freedom. 相似文献
7.
Impact Analysis of Air Gap Motion with Respect to Parameters of Mooring System for Floating Platform
In this paper, the impact analysis of air gap concerning the parameters of mooring system for the semi-submersible platform is conducted. It is challenging to simulate the wave, current and wind loads of a platform based on a model test simultaneously. Furthermore, the dynamic equivalence between the truncated and full-depth mooring system is still a tuff work. However, the wind and current loads can be tested accurately in wind tunnel model. Furthermore, the wave can be simulated accurately in wave tank test. The full-scale mooring system and the all environment loads can be simulated accurately by using the numerical model based on the model tests simultaneously. In this paper, the air gap response of a floating platform is calculated based on the results of tunnel test and wave tank. Meanwhile, full-scale mooring system, the wind, wave and current load can be considered simultaneously. In addition, a numerical model of the platform is tuned and validated by ANSYS AQWA according to the model test results. With the support of the tuned numerical model, seventeen simulation cases about the presented platform are considered to study the wave, wind, and current loads simultaneously. Then, the impact analysis studies of air gap motion regarding the length, elasticity, and type of the mooring line are performed in the time domain under the beam wave, head wave, and oblique wave conditions. 相似文献
8.
Many innovative floating offshore structures have been proposed for cost effectiveness of oil and gas exploration and production in water depths exceeding one thousand meters in recent years. One such type of platform is the offshore floating Spar platform. The Spar platform is modelled as a rigid body with six degrees-of-freedom, connected to the sea floor by multi-component catenary mooring lines, which are attached to the Spar platform at the fairleads. The response dependent stiffness matrix consists of two parts (a) the hydrostatics provide restoring force in heave, roll and pitch, (b) the mooring lines provide the restoring force which are represented here by nonlinear horizontal springs. A unidirectional regular wave model is used for computing the incident wave kinematics by Airy’s wave theory and force by Morison’s equation. The response analysis is performed in time domain to solve the dynamic behavior of the moored Spar platform as an integrated system using the iterative incremental Newmark’s Beta approach. Numerical studies are conducted for sea state conditions with and without coupling of degrees-of-freedom. 相似文献
9.
由于聚酯缆绳具备优异的力学性能,促使以其为主体系缆的绷紧式系泊系统得以广泛应用和发展。但聚酯系缆具有复杂的黏弹性和黏塑性,且由于在安装和使用过程中可能产生不同程度的损伤,使得聚酯系缆的动刚度特性发生演变,从而对系泊系统的动力响应产生直接影响。以一系泊于1 020 m水深的Spar平台为例,运用ABAQUS软件建立了由聚酯缆绳组成的系泊系统有限元模型,并利用ABAQUS子程序将损伤缆绳动刚度经验公式进行导入计算,以更好地反映系缆真实的动刚度变化。基于该有限元模型,计算了在相同水流、波浪工况下,不同损伤度、不同损伤系缆的系缆张力历程和平台的横荡、纵荡位移响应,分析了不同损伤度、不同损伤系缆对系缆张力及平台位移的影响。这些成果对把握绷紧式系泊系统在聚酯系缆有损伤情况下的非线性动力响应及其安全应用具有重要的参考价值。 相似文献
10.
Optimal Design of Equivalent Water Depth Truncated Mooring System Based on Baton Pattern Simulated Annealing Algorithm简 总被引：2，自引：2，他引：0
The highest similarity degree of static characteristics including both horizontal and vertical restoring force-displacement characteristics of total mooring system, as well as the tension-displacement characteristics of the representative single mooring line between the truncated and full depth system are obtained by annealing simulation algorithm for hybrid discrete variables （ASFHDV, in short）. A“baton” optimization approach is proposed by utilizing ASFHDV. After each baton of optimization, if a few dimensional variables reach the upper or lower limit, the boundary of certain dimensional variables shall be expanded. In consideration of the experimental requirements, the length of the upper mooring line should not be smaller than 8 m, and the diameter of the anchor chain on the bottom should be larger than 0.03 m. A 100000 t turret mooring FPSO in the water depth of 304 m, with the truncated water depth being 76 m, is taken as an example of equivalent water depth truncated mooring system optimal design and calculation, and is performed to obtain the conformation parameters of the truncated mooring system. The numerical results indicate that the present truncated mooring system design is successful and effective. 相似文献
11.
The model test method of the FPSO and offloading system is investigated by using the development mode of “FPSO + CALM + TANKER” working in a 1700-m depth of offshore West Africa. An equivalent design based on static and dynamic similarity criteria for oil offloading line (OOL) is discussed, and a type of creative method for the equivalent design of OOL in a model test is proposed. Based on the static similarity criterion, the truncated design of the FPSO mooring system in water depth and horizontal directions is carried out. After that, a relevant static optimization is conducted. Meanwhile, to avoid interference between the FPSO mooring system and CALM mooring system, a horizontal equivalent design for the CALM mooring system is provided. On this basis, the model test scheme is conducted. Time domain coupled analyses for the whole system before and after truncation are later performed. After comparison, it is observed that the calculated results of the truncated system are basically consistent with those of the prototype system, and the design of the model test scheme is demonstrated to be robust and reliable. 相似文献
12.
13.
14.
Dynamic Response Analysis of the Equivalent Water Depth Truncated Point of the Catenary Mooring Line
The real-time computer-controlled actuators are used to connect the truncated parts of moorings and risers in the active hybrid model testing system. This must be able to work in model-scale real time, based on feedback input from the floater motions. Thus, mooring line dynamics and damping effects are artificially simulated in real time, based on a computer-based model of the problem. In consideration of the nonlinear characteristics of the sea platform catenary mooring line, the equations of the mooring line motion are formulated by using the lumped-mass method and the dynamic response of several points on the mooring line is investigated by the time and frequency domain analysis method. The dynamic response of the representative point on the mooring line is analyzed under the condition of two different corresponding upper endpoint movements namely sine wave excitation and random wave excitation. The corresponding laws of the dynamic response between the equivalent water depth truncated points at different locations and the upper endpoint are obtained, which can provide technical support for further study of the active hybrid model test. 相似文献
15.
Numerical Analysis on the Effects of Submerged Depth of the Grid and Direction of Incident Wave on Gravity Cage 总被引：1，自引：0，他引：1
In this paper,the numerical model of the net cage with the grid mooring system in waves is set up by the lumped mass method and rigid kinematics theory,and then the motion equations of floating system,net system,mooring system,and floaters are solved by the Runge-Kutta fifth-order method.For the verification of the numerical model,a series of physical model tests have been carried out.According to the comparisons between the simulated and experimental results,it can be found that the simulated and experimental results agree well in each condition.Then,the effects of submerged depth of grid and direction of incident wave propagation on hydrodynamic behaviors of the net cage are analyzed.According to the simulated results,it can be found that with the increase of submerged depth of grid,the forces acting on mooring lines and bridle lines increase,while the forces on grid lines decrease;the horizontal motion amplitudes of floating collar decrease obviously,while the vertical motion amplitudes of floating collar change little.When the direction of incident wave propagation changes,forces on mooting lines and motion of net cage also change accordingly.When the propagation direction of incident wave changes from 0° to 45°,forces on the main ropes and bridle ropes increase,while the forces on the grid ropes decrease.With the increasing propagation direction of incident wave,the horizontal amplitude of the forces collar decreases,while the vertical amplitude of the floating collar has little variation. 相似文献
16.
17.
均匀流中深水系泊Truss Spar平台涡激运动试验研究 总被引：1，自引：0，他引：1
在工程中广泛应用的Truss Spar平台自诞生之初就为涡激运动问题所困扰,对其运动特性及抑制方法的机理性研究始终都在进行。采用截断系泊系统水池模型试验对设计中的Truss Spar平台在均匀流中的涡激运动响应进行了研究,分析了有无侧板平台的运动轨迹以及不同速度及流向角来流对平台运动的平衡位置的影响。在影响平台涡激运动特性的重要因素中,选取折合速度及流向角分别加以研究,分析了幅值在锁定区间中的变化规律,验证了减涡侧板对涡激运动良好的抑制作用,并对热点问题进行了探讨。为进一步研究Spar平台的涡激运动特性奠定了基础。 相似文献
18.
Hydrodynamic performance of an ultra deep turret-moored Floating Liquefied Natural Gas(FLNG) system is investigated.Hydrodynamic modeling of a turret-moored FLNG system,in consideration of the coupling effects of the vessel and its mooring lines,has been addressed in details.Based on the boundary element method,a 3-D panel model of the FLNG vessel and the related free water surface model are established,and the first-order and second-order mean-drift wave loads and other hydrodynamic coefficients are calculated.A systematic model test program consisting of the white noise wave test,offset test and irregular wave test combined with current and wind,etc.is performed to verify the numerical model.Owing to the depth limit of the water basin,the model test is carried out for the hydrodynamics of the FLNG coupled with only the truncated mooring system.The numerical simulation model features well the hydrodynamic performance of the FLNG system obtained from the model tests.The hydrodynamic characteristics presented in both the numerical simulations and the physical model tests would serve as the guidance for the ongoing project of FLNG system. 相似文献
19.
内孤立波作用下Spar平台的运动响应 总被引：9，自引：0，他引：9
建立了内孤立波作用下Spar平台运动响应的时域数值模型,并利用这一模型计算了内孤立波作用下Spar平台的运动响应。其中根据K-dv方程解出内孤立波的波面及水质点速度表达式,应用Morison公式求出内孤立波对Spar平台的水平作用力;由伯努力方程求解压强,通过在平台底面积分求出内孤立波对Spar平台的垂向作用力;在悬链线理论的基础上,分析锚链对平台的作用力,采用四阶Runge-Kutta方法求解运动方程。数值结果表明,当内孤立波不断接近海洋平台时,Spar平台受到的作用力随之增大,海洋平台会产生远大于表面波作用下的水平位移,从而证实了内孤立波是影响海洋平台稳定的重要因素,在海洋平台的设计和评估中内孤立波的作用是不可忽略的。 相似文献
20.
《Applied Ocean Research》2005,27(4-5):187-208
In the present paper, the performance of a moored floating breakwater under the action of normal incident waves is investigated in the frequency domain. A three-dimensional hydrodynamic model of the floating body is coupled with a static and dynamic model of the mooring lines, using an iterative procedure. The stiffness coefficients of the mooring lines in six degrees of freedom of the floating breakwater are derived based on the differential changes of mooring lines' tensions caused by the static motions of the floating body. The model of the moored floating system is compared with experimental and numerical results of other investigators. An extensive parametric study is performed to investigate the effect of different configurations (length of mooring lines and draft) on the performance of the moored floating breakwater. The draft of the floating breakwater is changed through the appropriate modification of mooring lines' length. Numerical results demonstrate the effects of the wave characteristics and mooring lines' conditions (slack-taut). The existence of ‘optimum’ configuration of the moored floating breakwater in terms of wave elevation coefficients and mooring lines' forces is clearly demonstrated, through a decision framework. 相似文献