首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 109 毫秒
1.
Scheelite-mineralized microtonalite sheets occur on the SE margin of the end-Caledonian Leinster Granite in SE Ireland. Scheelite, polymetallic sulphides and minor cassiterite occur in veins in the microtonalites, disseminated throughout the greisened microtonalite sheets and in the adjacent wallrocks. Two major mineralized vein types occur in the microtonalite sheets: (1) Scheelite ± arsenopyrite ± pyrrhotite occur in quartz-fluorite veins, generally without a muscovite selvage; (2) Sphalerite ± chalcopyrite ± pyrite ± galena ± cassiterite ± stannite occur in quartz + fluorite veins with a coarse muscovite selvage and are often intergrown with the muscovite. Quartz-hosted fluid inclusions were examined from representative samples of both vein types using petrographic, microthermometric and laser Raman spectroscopic techniques. Three distinct types of fluid inclusions have been recognized. Primary, vapour rich Type 1 inclusions in quartz from the scheelite-mineralized veins are of H2O-CO2-CH4-N2 ± H2S ± NaCl composition and formed between 360–530 °C. Primary and secondary, liquid-rich Type 2 fluid inclusions in the base metal sulphide-mineralized veins are of H2O-CH4-N2 ± H2S-NaCl composition and formed between 340–480 °C. They also occur as pseudosecondary and secondary inclusions in scheelite-mineralized veins. Late dilute, low temperature H2O-NaCl + KCl fluid inclusions may be related to late-Caledonian convection of meteoric waters around the cooling Leinster Granite batholith. Received: 4 September 1996 / Accepted: 23 May 1997  相似文献   

2.
The Bugdaya Au-bearing W-Mo porphyry deposit, Eastern Transbaikal Region, Russia, is located in the central part of volcanic dome and hosted in the large Variscan granitic pluton. In its characteristics, this is a Climax-type deposit, or an Mo porphyry deposit of rhyolitic subclass. The enrichment in gold is related to the relatively widespread vein and veinlet gold-base-metal mineralization. More than 70 minerals (native metals, sulfides, sulfosalts, tellurides, oxides, molybdates, wolframates, carbonates, and sulfates) have been identified in stockwork and vein ores, including dzhalindite, greenockite, Mo-bearing stolzite, Ag and Au amalgams, stromeyerite, cervelleite, and berryite identified here for the first time. Four stages of mineral formation are recognized. The earliest preore stage in form of potassic alteration and intense silicification developed after emplacement of subvolcanic rhyolite (granite) porphyry stock. The stockwork and vein W-Mo mineralization of the quartz-molybdenite stage was the next. Sericite alteration, pyritization, and the subsequent quartz-sulfide veins and veinlets with native gold, base-metal sulfides, and various Ag-Cu-Pb-Bi-Sb sulfosalts of the gold-base-metal stage were formed after the rearrangement of regional pattern of tectonic deformation. The hydrothermal process was completed by argillic (kaolinite-smectite) assemblage of the postore stage. The fluid inclusion study (microthermometry and Raman spectroscopy) allowed us to establish that the stockwork W-Mo mineralization was formed at 550–380°C from both the highly concentrated Mg-Na chloride solution (brine) and the low-density gas with significant N2 and H2S contents. The Pb-Zn vein ore of the gold-base-metal stage enriched in Au, Ag, Bi, and other rare metals was deposited at 360–140°C from a homogeneous Na-K chloride (hydrocarbonate, sulfate) hydrothermal solution of medium salinity.  相似文献   

3.
Tungsten ore at Carrock Fell Mine comprises wolframite and scheelite in polyminerallic quartz veins which traverse the Grainsgill Granite cupola and surrounding country rocks. In the veins, a wolframite-scheelite-apatite assemblage pre-dates a scheelite-arsenopyrite-pyrite (plus other sulphides) assemblages. Temperatures of mineralisation declined from a peak near 350°C to 170°C, and the hydrothermal fluid contained about 6 weight% NaCl and 3 wt% NaHCO3. Contemporaneous greisenisation involved loss of Na, Cr, Ca and Ba from granite, but Si and K were retained while B, Be and Al increased slightly. Sn also increased but is always a trace constituent, and F appears to have decreased. Zones of intense alteration contain high concentrations of quartzhosted fluid inclusions resulting from penetration of the granite by fluid chemically similar to that in the vein quartz. The W-rich, Sn-poor nature of the mineralisation may relate to the weakly saline, F-deficient but CO2-rich fluid chemistry. The alteration and mineralisation processes took place during late cooling of the Lower-Devonian Skiddaw Granite. Cross-cutting quartz-ankerite veins and argillitic zones which may be considerably younger than those producing the tungsten ore, have a distinct mineral suite lacking W and As and including major Pb and Zn. Temperatures at this late stage were below 150°C, and the fluid is estimated to have contained approximately 12 wt% NaCl and 15 wt% CaCl2.  相似文献   

4.
The Brandberg West region of NW Namibia is dominated by poly-deformed turbidites and carbonate rocks of the Neoproterozoic Damara Supergoup, which have been regionally metamorphosed to greenschist facies and thermally metamorphosed up to mid-amphibolite facies by Neoproterozoic granite plutons. The meta-sedimentary rocks host Damaran-age hydrothermal quartz vein-hosted Sn–W mineralization at Brandberg West and numerous nearby smaller deposits. Fluid inclusion microthermometric studies of the vein quartz suggests that the ore-forming fluids at the Brandberg West mine were CO2-bearing aqueous fluids represented by the NaCl–CaCl2–H2O–CO2 system with moderate salinity (mean=8.6 wt% NaClequivalent).Temperatures determined using oxygen isotope thermometry are 415–521°C (quartz–muscovite), 392–447°C (quartz–cassiterite), and 444–490°C (quartz–hematite). At Brandberg West, the oxygen isotope ratios of quartz veins and siliciclastic host rocks in the mineralized area are lower than those in the rocks and veins of the surrounding areas suggesting that pervasive fluid–rock interaction occurred during mineralization. The O- and H-isotope data of quartz–muscovite veins and fluid inclusions indicate that the ore fluids were dominantly of magmatic origin, implying that mineralization occurred above a shallow granite pluton. Simple mass balance calculations suggest water/rock ratios of 1.88 (closed system) and 1.01 (open system). The CO2 component of the fluid inclusions had similar δ 13C to the carbonate rocks intercalated with the turbidites. It is most likely that mineralization at Brandberg West was caused by a combination of an impermeable marble barrier and interaction of the fluids with the marble. The minor deposits in the area have quartz veins with higher δ 18O values, which is consistent with these deposits being similar geological environments exposed at higher erosion levels.  相似文献   

5.
In the Variscan foreland of SW-Sardinia (Western Mediterranean sea), close to the leading edge of the nappe zone, nappe emplacement caused folding and repetition of stratigraphic successions, km-scale offset of stratigraphic boundaries and an extensive brittle-ductile shear zone. Thrusts assumed a significant role, accommodating a progressive change of shortening direction and forming complicated thrust triangle zones. During thrust emplacement of the nappes, strong penetrative deformation affected rocks beneath the basal thrust of the nappe stack and produced coeval structures with both foreland-directed and hinterland-directed (backthrusting) shear sense. Cross-cutting and overprinting relationships clearly show that the shortening direction changed progressively from N–S to E–W, producing in sequence: (1) E–W trending open folds contemporaneous with early nappe emplacement in the nearby nappe zone; (2) recumbent, quasi-isoclinal folds with axial plane foliation and widespread, “top-towards-the-SW”, penetrative shearing; (3) N–S trending folds with axial plane foliation, contemporaneous with late nappe emplacement; (4) backthrusts and related asymmetrical folds developed during the final stages of shortening, postdating foreland-verging structures. Structures at (3) and (4) occurred during the same tectonic transport “top-towards-the-E” of the nappe zone over the foreland. The several generations of folds, thrusts, and foliations with different orientations developed, result in a complex finite structural architecture, not completely explicable by the theoretical model proposed up to date.  相似文献   

6.
Summary Based on mineral-chemical evidence we propose that the northernmost Scandian ultra-high pressure (UHP) metamorphic domain within the Western Gneiss Region of Norway can be extended 25 km northeastwards. A newly discovered, well preserved, fine-grained, Fe–Ti type garnet peridotite body at Svartberget, located in the Ulla Gneiss of the ‘M?re og Romsdal’ area north of Molde, is cut by a network of systematically orientated coarse-grained garnet-websterite and garnetite veins. Standard thermobarometric techniques based on electron microprobe analyses yield pressure (P) and temperature (T) estimates around 3.4 GPa, and 800 °C for the peridotite body and 5.5 GPa, and 800 °C for the websterite veins consistent with UHP conditions. In addition, polyphase solid inclusions, consisting of silicates, carbonates, sulphates and elemental carbon (including microdiamond), are randomly located in garnet and clinopyroxene of the websterite vein assemblage. Garnet-clinopyroxene mineral pairs yield a Sm–Nd cooling age of 393 ± 3 Ma for the peridotite and 381 ± 6 Ma for the vein assemblage suggesting that the Svartberget body was overprinted during the UHPM of the Scandian Orogeny. The initial ratio of the mineral isochron and Nd model ages suggest a mid-Proterozoic origin for the peridotite body. The polyphase inclusions, coupled with high 87Sr/86Sr ratios may indicate that the peridotite body was infiltrated by crustal-derived C–O–H melts/fluids at UHPM conditions to form the websterite veins in the diamond field. We propose that fracturing and vein emplacement were the result of local high fluid pressure during subduction of the Baltic plate. Present address: Physics of Geological Processes, University of Oslo, Oslo, Norway  相似文献   

7.
  Copper and subordinate molybdenum mineralization at Malanjkhand occurs within a fracture-controlled quartz-reef enclosed in a pink granitoid body surrounded by grey-granitoids constituting the regional matrix. Sulfide-bearing stringers, pegmatites with only quartz + microcline and sulfide disseminations, all within the pink-granitoid, represent other minor modes of occurrences. Despite this diversity in mode of occurrence, the mineralogy of ores is quite consistent and conform to a common paragenetic sequence comprising an early `ferrous' stage of precipitation of magnetite (I) and pyrite (I) and, the main-stage chalcopyrite mineralization with minor sphalerite, pyrite (II), magnetite (II), molybdenite and hematite. Both stages witnessed continuous precipitation of quartz ± microcline ± (chlorite, biotite and epidote). The enclosing pink-granitoid and the regional grey-granitoids display alteration features such as saussuritization of plagioclase, breakdown of hornblende and chloritization of biotite on a regional scale, indicating interaction with a pervasive fluid. Quartz and microcline precipitation mostly restricted within the pink granitoid, postdates this alteration. Four types of primary inclusions were encountered in quartz from ore samples: (1) type-I – aqueous-biphase(L + V) inclusions, the commonest variety in all ore types; (2) type-II – aqueous-carbonic(Laq + Lcarb ± Vcarb); (3) type-III – pure-carbonic(Lcarb ± Vcarb) – type-II and III being restricted to stringer and pegmatitic ores, and (4) rare polyphase (Laq + Vaq + calcite/gypsum) inclusions. Quartz in granitoids contain primary type-I inclusions only. Type-I inclusions from ore samples furnish a temperature range (after a rough pressure correction to the T H  -maxima of 140–180 °C) of 150–275 °C and a moderately low salinity of 4–12 wt.% NaCl equivalent. This is inferred to represent the signature of the major component (F2) of the ore fluid. A few type-I inclusions of higher T M (up to 380 °C) and low salinity and density represent the other (F1) identifiable component of the ore fluid present in low proportion. The T H  -maxima and the total range in salinity of type-I inclusions in quartz from granitoids are strikingly similar to those from the ore samples. Composition of syn-ore chlorites furnished a temperature range of 185–327 °C, which conforms to the fluid inclusion microthermometric data. Pressure estimates using standard fluid inclusion geobarometric methods, vary from 550 to 1790 bar in the stringer ores. Observed temperature-salinity/density relationships are best explained by a two-stage evolution model of the ore fluid: the first stage witnessed mixing of the two components, F1 and F2 in unequal proportion, bringing about mineralization. The second stage of evolution was marked by the separation of a carbonic component on continued sulfide precipitation and attendant increase in salinity of the fluid. The F1 component emerged as a distinct, heated and (CO2 + S)-charged entity due to steam-heating and contamination of the early-ingressed F2 fluid at the fracture zone. The pervasive fluid phase in the surrounding granitoids contributed the F2 component. Received: (10 August 1994), 15 August 1995 / Accepted: 12 January 1996  相似文献   

8.
The Sar-Cheshmeh porphyry Cu–Mo deposit is located in Southwestern Iran (65 km southwest of Kerman City) and is associated with a composite Miocene stock, ranging in composition from diorite through granodiorite to quartz-monzonite. Field observations and petrographic studies demonstrate that the emplacement of the Sar-Cheshmeh stock took place in several pulses, each with associated hydrothermal activity. Molybdenum was concentrated at a very early stage in the evolution of the hydrothermal system and copper was concentrated later. Four main vein Groups have been identified: (I) quartz+molybdenite+anhydrite±K-feldspar with minor pyrite, chalcopyrite and bornite; (II) quartz+chalcopyrite+pyrite±molybdenite±calcite; (III) quartz+pyrite+calcite±chalcopyrite±anhydrite (gypsum)±molybdenite; (IV) quartz±calcite±gypsum±pyrite±dolomite. Early hydrothermal alteration produced a potassic assemblage (orthoclase-biotite) in the central part of the stock, propylitic alteration occurred in the peripheral parts of the stock, contemporaneously with potassic alteration, and phyllic alteration occurred later, overprinting earlier alteration. The early hydrothermal fluids are represented by high temperature (350–520 °C), high salinity (up to 61 wt% NaCl equivalent) liquid-rich fluid inclusions, and high temperature (340–570 °C), low-salinity, vapor-rich inclusions. These fluids are interpreted to represent an orthomagmatic fluid, which cooled episodically; the brines are interpreted to have caused potassic alteration and deposition of Group I and II quartz veins containing molybdenite and chalcopyrite. Propylitic alteration is attributed to a liquid-rich, lower temperature (220–310 °C), Ca-rich, evolved meteoric fluid. Influx of meteoric water into the central part of the system and mixing with magmatic fluid produced albitization at depth and shallow phyllic alteration. This influx also caused the dissolution of early-formed copper sulphides and the remobilization of Cu into the sericitic zone, the main zone of the copper deposition in Sar-Cheshmeh, where it was redeposited in response to a decrease in temperature.  相似文献   

9.
A study of the 933±32-Ma-old Bolangir massif-type anorthosite complex (Eastern Ghats Province, India) yielded strong evidence for anorthosite emplacement during regional shortening, and thereby new insights in massif-type anorthosite formation. Several lines of evidence strongly suggest synchronism of plutonism and regional deformation. First, structures in the country rocks, which imply N–S-directed shortening accompanied by E–W extension, are mirrored by a E–W trending post-magmatic foliation and N–S trending shear zones in the anorthosite complex. Near the intrusion, the foliation in the country rocks becomes parallel to the contact and an internal marginal foliation, and foliation triple points occur in the country rocks. Second, synshortening dikes inside and outside the anorthosite complex are filled with pluton-related melts. Third, ferrodiorites, which are considered late-stage differentiates of the anorthositic pluton, concentrate in tectonic voids at the pluton margin. Some of these occurrences have been affected by the last increments of the regional deformation, but others transect the same structures. Ascent mechanism and significance of the adjacent terrane boundary of the Eastern Ghats Belt for ascent and emplacement of the Bolangir anorthosite complex are discussed. The results of this study imply that emplacement of Proterozoic massif-type anorthosite is not restricted to extensional settings.  相似文献   

10.
The Dongpo tungsten ore deposit, the largest scheelite skarn deposit in China, is located at the contact of a 172-m. y. biotite granite with a Devonian marble. The mineralization associated with the granite includes W, Bi-Mo, Cu-Sn and Pb-Zn ores. Several W mineralization stages are shown by the occurrence of ore in massive skarn deposits and in later cross-cutting veins. The high garnet/pyroxene ratio, the hedenbergite and diopside-rich pyroxene and the andradite-rich garnet show the deposit belongs to the oxidized skarn type. Detailed fluid inclusion studies of granite, greisen, skarn and vein samples reveal three types of fluid inclusion: (1) liquid-rich, (2) gas-rich and (3) inclusions with several daughter minerals. Type (3) is by far the most common in both skarn and vein samples. The dominant daughter mineral in fluid inclusions is rhembic, highly birefringent, and does not dissolve on heating even at 530°C. We assume that this mineral is calcite. The liquid phase in most of the fluid inclusions has low to moderate salinities: 0–15 wt. %; in a few has higher salinities (30–40 wt. % NaCl equivalent). The homogenization temperatures of inclusions in the skarn stage range from 350°C to 530°C, later tungsten mineralization-stage inclusions homogenize between 200°C and 300°C, as do inclusions in veins. Fluid inclusions in granite and greisen resemble those of the late tungsten mineralization stage, with low salinity and homogenization temperatures of 200°–360°C. The tungsten-forming fluids are probably a mixture that came from biotite granite and the surrounding country rocks.  相似文献   

11.
2014年发现的维拉斯托锡锌矿是继20世纪末该矿区铜锌矿之后的重要找矿进展,已控制Sn金属资源量10万t。成矿作用与隐伏花岗岩体有关,该岩体侵入于前寒武纪变质岩中。矿化类型包括岩体顶部的花岗岩型锡锌矿、岩体外侧的石英脉型锡锌矿以及外围的铜锌矿。针对花岗岩、各类矿体开展了岩石学、矿床学、主微量元素地球化学、年代学等研究,初步查明岩浆演化机制、矿床成因及三类矿化的关系。细粒斑状碱长花岗岩La-ICPMS锆石UPb年龄(139.5±1.2)Ma(MSWD=3.3)。岩石中发育多级斑晶,结晶(沉淀)顺序为钠长石→石英→钾长石→钠长石→石英、黄玉、锡石、闪锌矿。花岗岩富Si O2贫Al2O3、Ti O2、TFe2O3、Ca O等,高Rb、Cs、Nb、Ta及W、Mo、Bi、Cu、Zn、In等元素,低Sr、Ba等,钠长石An0.3,与锡钨多金属矿成矿花岗岩性质相似。岩浆晚期经历了岩浆-热液过渡阶段(浆液过渡态流体),自硅酸盐相中分离出富Si、富F和富S的流体相,分别形成花岗岩型矿石中的石英、黄玉、锡石-闪锌矿囊状体(珠滴),伴随熔融包裹体和熔流包裹体,晚期逐渐、连续地向热液阶段过渡。岩浆-热液过渡阶段在岩体顶部形成花岗岩型锡锌矿石,热液阶段在岩体外侧和外围形成石英脉型锡锌矿及铜锌矿、铅锌银矿。这些矿体连同成矿花岗岩共同构成岩浆-热液型锡多金属矿床成矿系统。锡林郭勒—赤峰地区,很多脉状铅锌银矿的成矿作用与酸性侵入岩有关,深部可能存在大规模岩浆-热液型锡(钨)多金属矿。  相似文献   

12.
Summary ?In the south-eastern Altenbergkar–Silbereck area in the eastern Tauern window (Lungau, Salzburg) structurally controlled precious-metal (Au–Ag) mineralization is hosted in marbles of the Permo(?)-Mesozoic Silbereck Formation and in the underlying Variscan Central gneiss. During the Alpine otogeny both lithologies were affected by ductile deformation (shearing, D1; folding, D2/D3) and subsequent brittle deformation (tension gashes, D4; normal faulting, D5) related to the uplift and exhumation of the Tauern window. Mineralization is controlled by brittle D4 structures. NE–SW trending steeply dipping tension gashes of the “Tauerngoldgang” type occur within the Central gneiss. Three different marble-hosted ore types following fracture systems as well as foliation and bedding planes can be distinguished: 1) metasomatic replacement ores, 2) ores in tension gashes and 3) ores in talc-bearing structures, often containing high-grade gold and silver mineralization (native gold in association with Ag–Pb–Bi–sulfosalts). Four stages of mineralization can be distinguished which occur in all ore types: arsenopyrite–pyrite–pyrrhotite (first stage), Au–(Ag–Pb–Bi–sulfosalts) (second stage), base-metal sulfides and tetrahedrite–tennantite (third stage) and Ag-rich galena (fourth stage). Preliminary fluid inclusion data indicate temperatures of ore formation well above 300 °C (346 °C mean) for the second stage within the Central gneiss and temperatures between 310 and 230 °C for the second and third stages in the marble. Received October 12, 2001; revised version accepted September 5, 2002 Published online March 10, 2003  相似文献   

13.
Both stratiform/stratabound and granite-related models have been used to explain the genesis of W(Mo) deposits in the Okiep copper district in western Namaqualand, South Africa. Apparently, stratabound mineralization (Fe-rich wolframite with accessory molybdenite) occurs in foliation-parallel quartz veins in high-grade (∼750 °C, 5–6 kbar) metapelites of the Wolfram Formation, and less commonly in small bodies of silicified leucogranites and pegmatites. Six Re–Os ages for molybdenites from four deposits (Nababeep Tungsten Far West, Kliphoog, Narrap, Tweedam) range between 1000 ± 4 and 1026 ± 5 Ma. These molybdenites define a well-constrained 187Re–187Os isochron with an age of 1019 ± 6 Ma, which is interpreted as the age of W(Mo) mineralization. This age is significantly younger than Proterozoic protolith ages for supracrustal rocks and the emplacement ages for the main intrusive suites, but geologic evidence requires overlap with a period of high-grade metamorphism. We suggest that W(Mo) mineralization is genetically linked to intra-crustal magmatic processes at ∼1020 Ma, thereby precluding the ∼1060 Ma Concordia granite as the source for mineralizing fluids. A narrow range of positive δ34S compositions (+3.6 to +4.5‰) for eight molybdenites from five W(Mo) mines is consistent with a SO2-rich fluid and a granite-related genetic model. Post-peak metamorphic deformation and metamorphism of W(Mo) ores is most likely related to the retrograde stage of the Namaquan orogeny, which overlaps emplacement of late-orogenic, evolved granites and pegmatites, and the formation of W(Mo) deposits in western Namaqualand. Therefore, the effects of retrograde Namaquan metamorphism extend at least to ∼1020 Ma or, alternatively, these W(Mo) veins were affected by a poorly constrained later event (e.g. early Pan-African). Received: 12 September 1999 / Accepted: 20 April 2000  相似文献   

14.
河南省洛宁县铁炉坪大型脉状银铅矿床地处华北陆块南缘熊耳山中生代变质核杂岩构造西部,由一组主要的NNE走向陡倾斜矿脉和一组次要的NW走向陡倾斜矿脉有规律地组成.矿脉以条带状、角砾状和晶洞-晶簇-梳状三种主要形式多阶段充填而成,按照主要矿脉的矿物共生序列可以分为四个阶段:铁镁碳酸盐阶段(I)、烟灰色石英-贱金属硫化物-银矿...  相似文献   

15.
The Navachab gold deposit in the Damara belt of central Namibia is hosted by a near-vertical sequence of amphibolite facies shelf-type metasediments, including marble, calc-silicate rock, and biotite schist. Petrologic and geochemical data were collected in the ore, alteration halos, and the wall rock to evaluate transport of elements and interaction between the wall rock and the mineralizing fluid. The semi-massive sulfide lenses and quartz–sulfide veins are characterized by a complex polymetallic ore assemblage, comprising pyrrhotite, chalcopyrite, sphalerite, and arsenopyrite, native bismuth, gold, bismuthinite, and bismuth tellurides. Mass balance calculations indicate the addition of up to several orders of magnitude of Au, Bi, As, Ag, and Cu. The mineralized zones also record up to eightfold higher Mn and Fe concentrations. The semi-massive sulfide lenses are situated in the banded calc-silicate rock. Petrologic and textural data indicate that they represent hydraulic breccias that contain up to 50 vol.% ore minerals, and that are dominated by a high-temperature (T) alteration assemblage of garnet–clinopyroxene–K-feldspar–quartz. The quartz–sulfide veins crosscut all lithological units. Their thickness and mineralogy is strongly controlled by the composition and rheological behavior of the wall rocks. In the biotite schist and calc-silicate rock, they are up to several decimeters thick and quartz-rich, whereas in the marble, the same veins are only a few millimeters thick and dominated by sulfides. The associated alteration halos comprise (1) an actinolite–quartz alteration in the biotite schist, (2) a garnet–clinopyroxene–K-feldspar–quartz alteration in the marble and calc-silicate rock, and (3) a garnet–biotite alteration that is recorded in all rock types except the marble. The hydrothermal overprint was associated with large-scale carbonate dissolution and a dramatic increase in CO2 in the ore fluid. Decarbonation of wall rocks, as well as a low REE content of the ore fluid resulted in the mobilization of the REE, and the decoupling of the LREE from the HREE. The alteration halos not only parallel the mineralized zones, but may also follow up single layers away from the mineralization. Alteration is far more pronounced facing upward, indicating that the rocks were steep when veining occurred. The petrologic and geochemical data indicate that the actinolite–quartz– and garnet–clinopyroxene–K-feldspar–quartz alterations formed in equilibrium with a fluid (super-) saturated in Si, and were mainly controlled by the composition of the wall rocks. In contrast, the garnet–biotite alteration formed by interaction with a fluid undersaturated in Si, and was mainly controlled by the fluid composition. This points to major differences in fluid–rock ratios and changes in fluid composition during alteration. The alteration systematics and geometry of the hydrothermal vein system are consistent with cyclic fluctuations in fluid pressure during fault valve action. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

16.
The Pingüino deposit, located in the low sulfidation epithermal metallogenetical province of the Deseado Massif, Patagonia, Argentina, represents a distinct deposit type in the region. It evolved through two different mineralization events: an early In-bearing polymetallic event that introduced In, Zn, Pb, Ag, Cd, Au, As, Cu, Sn, W and Bi represented by complex sulfide mineralogy, and a late Ag–Au quartz-rich vein type that crosscut and overprints the early polymetallic mineralization. The indium-bearing polymetallic mineralization developed in three stages: an early Cu–Au–In–As–Sn–W–Bi stage (Ps1), a Zn–Pb–Ag–In–Cd–Sb stage (Ps2) and a late Zn–In–Cd (Ps3). Indium concentrations in the polymetallic veins show a wide range (3.4 to 1,184 ppm In). The highest indium values (up to 1,184 ppm) relate to the Ps2 mineralization stage, and are associated with Fe-rich sphalerites, although significant In enrichment (up to 159 ppm) is also present in the Ps1 paragenesis associated with Sn-minerals (ferrokesterite and cassiterite). The hydrothermal alteration associated with the polymetallic mineralization is characterized by advanced argillic alteration within the immediate vein zone, and sericitic alteration enveloping the vein zone. Fluid inclusion studies indicate homogenisation temperatures of 308.2–327°C for Ps1 and 255–312.4°C for Ps2, and low to moderate salinities (2 to 5 eq.wt.% NaCl and 4 to 9 eq.wt.% NaCl, respectively). δ34S values of sulfide minerals (+0.76‰ to +3.61‰) indicate a possible magmatic source for the sulfur in the polymetallic mineralization while Pb isotope ratios for the sulfides and magmatic rocks (206Pb/204Pb, 207Pb/204Pb and 208Pb/204Pb ratios of 17.379 to 18.502; 15.588 to 15.730 and 38.234 to 38.756, respectively) are consistent with the possibility that the Pb reservoirs for both had the same crustal source. Spatial relationships, hydrothermal alteration styles, S and Pb isotopic data suggest a probable genetic relation between the polymetallic mineralization and dioritic intrusions that could have been the source of metals and hydrothermal fluids. Mineralization paragenesis, alteration mineralogy, geochemical signatures, fluid inclusion data and isotopic data, confirm that the In-bearing polymetallic mineralization from Pingüino deposit is a distinct type, in comparison with the well-known epithermal low sulfidation mineralization from the Deseado Massif.  相似文献   

17.
The ore deposits of The Granites goldfield are shear-hosted within Palaeoproterozoic amphibolite facies metasedimentary rocks in the Tanami Region, Northern Territory, Australia. The ore bodies are located within a 5- to 35-m thick sequence of steeply dipping unit of metamorphosed iron-rich metasedimentary rocks. Deformation at The Granites was complex and is characterized by five successive deformation phases (D1–5). Shear veins (central and oblique) are the dominant type of vein geometry, with minor development of extensional veins and reverse-fault related veins. Four generations of syn-tectonic veins, corresponding to D1, D3, D4, and D5, have been recognized and are comprised of quartz, quartz-carbonate, calc-silicate, and calcite. In addition, two generations of disseminated sulfide–arsenide mineralization, dominated by pyrrhotite, arsenopyrite, and loellingite, with minor pyrite, chalcopyrite and rare marcasite, formed syn-D1 and syn- to post-D3. Textural and structural evidence indicates deposition of gold was contemporaneous with the syn-D1 veins and sulfide–arsenide mineralization. Four hydrothermal phases are proposed for the formation of the veins and disseminated sulfide–arsenide assemblages. The first phase (D1) was responsible for transport and deposition of the majority of the gold. Minor remobilization and deposition of gold occurred during the D3 and D4 phases. Little is known about the nature of the D1 ore fluid, although a relatively low sulfur content is indicated by the assemblage pyrrhotite–arsenopyrite–loellingite+rare pyrite. The growth of amphibolite facies metamorphic minerals andalusite and almandine garnet during D1 indicates a high temperature for the fluid. The D3 hydrothermal phase coincided with peak metamorphism. D4 fluids were hypersaline, high temperature, CO2-poor, and H2S-poor. Editorial handling: L. Meinert  相似文献   

18.
The breccia-hosted epithermal gold–silver deposit of Chah Zard is located within a high-K, calc-alkaline andesitic to rhyolitic volcanic complex in the central part of the Urumieh-Dokhtar Magmatic Arc (UDMA), west central Iran. The total measured resource for Chah Zard is ∼2.5 million tonnes of ore at 12.7 g/t Ag and 1.7 g/t Au (28.6 t Ag, 3.8 t Au), making it one of the largest epithermal gold deposits in Iran. Magmatic and hydrothermal activity was associated with local extensional tectonics in a strike-slip regime formed in transtensional structures of the Dehshir-Baft strike-slip fault system. The host rocks of the volcanic complex consist of Eocene sedimentary and volcanic rocks covered by Miocene sedimentary rocks. LA-ICP–MS U–Pb zircon geochronology yields a mean age of 6.2 ± 0.2 Ma for magmatic activity at Chah Zard. This age represents the maximum age of mineralization and may indicate a previously unrecognized mineralization event in the UDMA. Breccias and veins formed during and after the waning stages of explosive brecciation events due to shallow emplacement of rhyolite porphyry. Detailed systematic mapping leads to the recognition of three distinct breccia bodies: volcaniclastic breccia with a dominantly clastic matrix; gray polymict breccia with a greater proportion of hydrothermal cement; and mixed monomict to polymict breccia with clay matrix. The polymictic breccias generated bulk-mineable ore, whereas the volcaniclastic breccia is relatively impermeable and largely barren. Precious metals occur with sulfide and sulfosalt minerals as disseminations, as well as in the veins and breccia cements. There is a progression from pyrite-dominated (stage 1) to pyrite-base metal sulfide and sulfosalt-dominated (stages 2 and 3) to base metal sulfide-dominated (stage 4) breccias and veins. Hydrothermal alteration and deposition of gangue minerals progressed from illite-quartz to quartz-adularia, carbonate, and finally gypsum-dominated assemblages. Free gold occurs in stages 2 and 4, principally intergrown with pyrite, quartz, chalcopyrite, galena, sphalerite, and Ag-rich tennantite–tetrahedrite, and also as inclusions in pyrite. High Rb/Sr ratios in ore-grade zones are closely related to sericite and adularia alteration. Positive correlations of Au and Ag with Cu, As, Pb, Zn, Sb, and Cd in epithermal veins and breccias suggest that all these elements are related to the same mineralization event.  相似文献   

19.
The emplacement of calcite-filled veins perpendicular to the Dead Sea Fault Zone in northern Israel reflects strain partitioning during transpression. We present structural, geochemical, and U–Th geochronological data that constrain the mechanism, conditions and timing of vein formation. Vein walls are strongly brecciated and commonly cemented with coarsely crystalline calcite, whereas calcite-filled veins are composed of wall-parallel bands of calcite crystals. Elongated blocky and fibrous calcite crystals grew perpendicular to the vein walls and are characterised by a truncate sealing-hiatus morphology, indicating episodes of partial or complete sealing of the fractures during calcite precipitation. Stable isotope and rare-earth element and yttrium (REY) analyses indicate that calcite-filled veins precipitated by karst processes, involving meteoric water and limited fluid-rock interactions. U–Th dating results show a prolonged history of vein growth. While some veins initiated prior to 500 ka, the majority of the veins were active between 358 and 17 ka. Age constraints on vein activity correspond to an ∼E–W regional shortening phase in this sector of the Dead Sea Fault Zone, associated with an increased component of convergence during the late-Pleistocene.  相似文献   

20.
The aim of this study was to determine at which parameters hydrothermal systems generate rich veins with bulk sphalerite contents of 30% and local concentrations in vein cross sections up to 60–70% and more. Such contents were found in the vein bodies of the Dzhimi deposit in the Sadon ore district, North Osetiya. For this purpose, we examined the thermodynamic models of the formation of base-metal filling veins. Ore-bearing fluids are formed in the root part of the hydrothermal system by the interaction of barren solutions with the host rocks (granites), which contain background contents of ore elements. The thermodynamic simulations were conducted for the system H-O-K-Na-Ca-Mg-Al-Si-Fe-C-Cl-S-Zn-Pb-Cu, which is described by 54 minerals of constant and variable composition and 78 aqueous species. The calculations for the mobilization zone were carried out for the temperature range of 360–440°C (through 10°C) and pressures of 600–1200 bar (with a 100 bar step). At each of the indicated temperature and pressure values, 100 waves (portions) of primary barren solution were subsequently passed through the granites. More than 20 complete models of the formation of filling veins (each model involving from 1000 to 1300 calculations) were constructed for individual T-P points in the mobilization zone, which was modeled by a sequence of multiwave step flowing reactors with a step of 10°C from 350–420 to 100°C at a constant pressure within the range of 600–1100 bar. We studied the effect of different background contents of Zn and Pb in granites on the efficiency of mobilization and ore formation and compared the relations in the naturally occurring distribution of ore elements along the continuous cross sections through Pb-Zb veins with the results of thermodynamic simulation. It was established that ore bodies with indicated bulk and local cross sectional contents of sphalerite could be formed in a narrow range of conditions in the mobilization zone (410–440°C and 900–1200 bar) and elevated background contents of Zn (more than 0.007 wt %) in the host granite. The maximum sphalerite contents (bulk and local in vein cross sections) are achieved updip the model veins within the temperature range of 150–200°C. Original Russian Text ? M.V. Borisov, D.A. Bychkov, Yu.V. Shvarov, 2006, published in Geokhimiya, 2006, No. 11, pp. 1218–1239.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号