共查询到20条相似文献，搜索用时 296 毫秒
1.
The conventional approach of obtaining the inelastic response spectra for the aseismic design of structures involves the reduction of elastic spectra via response modification factors. A response modification factor is usually taken as a product of (i) strength factor, RS, (ii) ductility factor, Rμ, and (iii) redundancy factor, RR. Ductility factor, also known as strength reduction factor (SRF), is considered to primarily depend on the initial time period of the single‐degree‐of‐freedom (SDOF) oscillator and the displacement ductility demand ratio for the ground motion. This study proposes a preliminary scaling model for estimating the SRFs of horizontal ground motions in terms of earthquake magnitude, strong motion duration and predominant period of the ground motion, geological site conditions, and ductility demand ratio, with a given level of confidence. The earlier models have not considered the simultaneous dependence of the SRFs on various governing parameters. Since the ductility demand ratio is not a complete measure of the cumulative damage in the structure during the earthquake‐induced vibrations, the existing definition of the SRF is sought to be modified with the introduction of damage‐based SRF (in place of ductility‐based SRF). A parallel scaling model has been proposed for estimating the damage‐based SRFs. This model considers damage and ductility supply ratio as parameters instead of ductility demand ratio. Through a parametric study on ductility‐based SRFs, it has been shown that the hitherto assumed insensitivity of earthquake magnitude and strong motion duration may not be always justified and that the initial time period of the oscillator plays an important role in the dependence of SRF on these parameters. Further, the damage‐based SRFs are found to show similar parametric dependence as observed in the case of the ductility‐based SRFs. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
2.
Estimation of design forces in ductility‐based earthquake‐resistant design continues to be carried out with the application of response modification factors on elastic design spectra, and it remains interesting to explore how best to estimate strength reduction factors (SRFs) for a design situation. This paper considers the relatively less explored alternative of modelling SRF spectrum via a given response spectrum. A new model is proposed to estimate the SRF spectrum in terms of a pseudo‐spectral acceleration (PSA) spectrum and ductility demand ratio with the help of two coefficients. The proposed model is illustrated for an elasto‐plastic oscillator, in case of 10 recorded accelerograms and three ductility ratios. The proposed model is convenient and is able to predict SRF spectrum reasonably well, particularly at periods up to 1.0 s. Coefficients of the proposed model may also be determined in case of a given design spectrum when there is uncertainty in SRF spectrum due to uncertainty in temporal characteristics of the ground motion. This is illustrated with the help of 474 accelerograms recorded in western U.S.A. and different scaled PSA spectra. It is shown that probabilistic estimates may be obtained in this situation for SRF spectrum by assuming the error residuals to be log normally distributed with period‐dependent parameters. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
3.
The estimation of peak linear response via elastic design (response) spectra continues to form the basis of earthquake‐resistant design of structural systems in various codes of practice all over the world. Many response spectrum‐based formulations of peak linear response require an additional input of the spectral velocity (SV) ordinates consistent with the specified seismic hazard. SV ordinates have been conventionally approximated by pseudo spectral velocity (PSV) ordinates, which are close to the SV ordinates only over the intermediate frequency range coinciding with the velocity‐sensitive region. At long periods, PSV ordinates underestimate the SV ordinates, and this study proposes a formulation of a correction factor (>1) that needs to be multiplied by the PSV ordinates in order to close the gap between the two sets of ordinates. A simple model is proposed in the form of a power function in oscillator period to estimate this factor in terms of two governing parameters which are in turn estimated from two single‐parameter scaling equations. The parameters considered for the scaling equations are (1) the period at which the PSV spectrum is maximized and (2) the rate of decay of the pseudo spectral acceleration (PSA) amplitudes at long periods. For a given damping ratio, four regression coefficients are determined for the scaling equations with the help of 205 ground motions recorded in western USA. A numerical study undertaken with the help of several design PSA spectra and ensembles of spectrum‐compatible ground motions illustrates the effectiveness of the proposed correction factor, together with the proposed scaling models, in comparison with the PSV approximation in a variety of design situations. Both the input parameters mentioned above can be easily obtained from the specified design spectrum, and thus the proposed model is convenient to use. 相似文献
4.
Ground-Motion Prediction Equations (GMPEs) for inelastic displacement and ductility demands of constant-strength SDOF systems 总被引：1，自引：1，他引：0
The objective of this paper is to present ground-motion prediction equations for ductility demand and inelastic spectral displacement
of constant-strength perfectly elasto-plastic single-degree-of-freedom (SDOF) oscillators. Empirical equations have been developed
to compute the ductility demand as a function of two earthquake parameters; moment magnitude, and source-to-site distance;
one site parameter, the ground type; and three oscillator parameters, an undamped natural period, critical damping ratio,
and the mass-normalized yield strength. In addition, a comparative study of the proposed model with selected previous studies
and recommendations of Eurocode 8 is presented. Proposed equations can easily be incorporated in existing probabilistic seismic
hazard analysis (PSHA) software packages with the introduction of an additional parameter. This leads to hazard curves for
inelastic spectral displacement, which can provide better estimates of target displacement for nonlinear static procedures
and an efficient intensity measure for probabilistic seismic demand analysis (PSDA). Proposed equations will be useful in
performance evaluation of existing structures. 相似文献
5.
The seismic performance of conventional wood‐frame structures in south‐western British Columbia is analytically investigated through incremental dynamic analysis by utilizing available UBC‐SAWS models, which were calibrated based on experimental test results. To define an adequate target response spectrum that is consistent with information from national seismic hazard maps, record selection/scaling based on the conditional mean spectrum (CMS) is implemented. Furthermore, to reflect complex seismic hazard contributions from different earthquake sources (i.e. crustal events, interface events, and inslab events), we construct CMS for three earthquake types, and use them to select and scale an adequate set of ground motion records for the seismic performance evaluation. We focus on the impacts of adopting different record selection criteria and of using different shear‐wall types (Houses 1–4; in terms of seismic resistance, House 1>House 2>House 3>House 4) on the nonlinear structural response. The results indicate that the record selection procedures have significant influence on the probabilistic relationship between spectral acceleration at the fundamental vibration period and maximum inter‐story drift ratio, highlighting the importance of taking into account response spectral shapes in selecting and scaling ground motion records. Subjected to ground motions corresponding to the return period of 2500 years, House 1 is expected to experience very limited extent of damage; Houses 2 and 3 may be disturbed by minor damage; whereas House 4 may suffer from major damage occasionally. Finally, we develop statistical models of the maximum inter‐story drift ratio conditioned on a seismic intensity level for wood‐frame houses, which is useful for seismic vulnerability assessment. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
6.
To develop uniform and seismic environment-dependent design spectrum, common acceleration response spectral characteristics need to be identified. In this paper, a bi-normalized response spectrum (BNRS) is proposed, which is defined as a spectrum of peak response acceleration normalized with respect to peak acceleration of the excitation plotted vs. the natural period of the system normalized with respect to the spectrum predominant period, Tp. Based on a statistical analysis of records from the 1999 Chi-Chi earthquake, the conventionally normalized response spectrum(NRS) and the BNRS are examined to account for the effects of soil conditions, epicentral distance, hanging wall and damping. It is found that compared to the NRS, the BNRS is much less dependent on these factors. Finally, some simple relationships between the BNRS for a specified damping ratio and that for a damping ratio of 5%, and between the spectra predominant period and epicentral distance for different soil types are provided. 相似文献
7.
This paper presents a practical method to compute uniform hazard floor acceleration spectra for linear oscillators attached to a linear structure. The method builds on a probabilistic seismic demand model that relates the acceleration response of the oscillator with that of the generic mode of vibration of the supporting structure. Interaction between oscillator and structure is ignored. Independency of the model on the specific characteristics of seismic hazard at the site is shown. By using the method floor spectra are determined through a closed‐form expression, given the mean annual frequency of interest, the damping ratio of the oscillators, the modal properties of the structure, and three uniform hazard spectra representing seismic hazard at the site. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
8.
DISCUSSION ON THE SPECTRA SHAPE OF SEISMIC MARGIN EARTHQUAKE OF NUCLEAR POWER PLANT IN CHINA 
下载免费PDF全文
下载免费PDF全文 Fukushima nuclear accident caused widespread concern of earthquake initiated severe accident. Under this background, China nuclear utilities carried out research and application of seismic margin assessment(SMA)approach to evaluate the seismic margin of the existing nuclear power plants(NPP)by different spectra shape of seismic margin earthquake(SME). By reviewing the method used to determine SME of operational NPP in central and eastern United States(CEUS), this paper analyzed the seismic hazard characteristic of China NPP sites, contrasted the design basis ground motion between NPP in CEUS and China, and suggested giving priority to evaluating the seismic margin of operational NPP that adopted the improved second generation technology for the urgency and importance of assessment on the actual seismic capacity of NPP. Comparing RG1.60 spectrum to normalized site-specific SL-2 level acceleration spectra, we found that some normalized spectra overtook the RG1.60's in high frequency range, so it is not always adequate to scale RG1.60 spectrum to evaluate the seismic margin for sites of the improved second generation NPP. We selected a sample site whose site-specific SL-2 level ground motion is close to the standard design of improved second generation NPP(0.2g scaled RG1.60 spectrum)to determine the seismic margin earthquake by probabilistic seismic hazard analysis method of the sample site. Compared to the given PGA(0.3g)scaled scenario earthquake ground motions and the uniform hazard response spectrum(UHRS), whose PGA is 0.3g to PGA(0.3g)scaled standard spectra(median NUREG/CR0098 spectrum and RG1.60 spectrum), the results demonstrated that uniform hazard response spectrum and scaled scenario earthquake ground motions are both significantly higher than the PGA scaled median NUREG/CR0098 spectrum, and all the three spectra are enveloped by PGA scaled RG1.60 spectrum. Then, this paper suggests adopting the uniform hazard response spectrum or scenario earthquake ground motions to evaluate the seismic margin of improved second generation NPP beyond site SL-2 ground motion; and to evaluate the seismic margin of improved second generation NPP beyond standard design, we recommend to use PGA scaled RG1.60 spectrum. 相似文献
9.
Deterministic and probabilistic seismic hazard analyses should be complementary, in the sense that probabilistic analysis may be used to identify the controlling deterministic design‐level earthquake events, and more sophisticated models of these events may then be developed to account for uncertainties that could not have been included directly in the probabilistic analysis. De‐aggregation of the tentative uniform hazard spectra (UHS) in Hong Kong resulting from a probabilistic seismic hazard assessment (PSHA) indicates that strong and major distant earthquakes, rather than moderate local earthquakes, make the largest contribution to the seismic hazard level within the natural‐period range longer than 0.3 s. Ground‐motion simulations of controlling events located 90 and 340 km from Hong Kong, taking into account uncertainties in the rupture process, reveal that the tentative UHS resulting from the PSHA may have significantly underestimated the mid‐to‐long period components. This is attributed mainly to the adoption of double‐corner source‐spectrum models in the attenuation relationships employed in the PSHA. The results of the simulations indicate clearly that rupture directivity and rupture velocity can significantly affect the characteristics of ground motions, even from such distant earthquakes. The rupture‐directivity effects have profound implications in elongating the second corner period where the constant velocity intersects the constant displacement, thus increasing the associated displacement demand. However, demands for acceleration and velocity are found to be not sensitive to the presence of the directivity pulses. Ground pulses resulting from forward rupture directivity of distant earthquakes have longer predominant periods than the usual near‐fault directivity pulses. These long‐period pulses may have profound implications for metropolises, such as Hong Kong and others in Southeast Asia, having large concentration of high‐rise buildings. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
10.
综合考虑强度退化、刚度退化、捏拢效应等典型滞回特性的影响,建立了双向地震作用下平面不对称结构非弹性地震动力响应分析的平扭耦联Bouc-Wen模型.该模型采用圆形屈服面来描述双向抗侧恢复力之间的耦合效应,而采用锥体或球体屈服面来描述双向抗侧和抗扭恢复力之间的耦合效应,并结合69条强震记录,定量地分析了平扭耦联效应对平面不... 相似文献
11.
Vinay K. Gupta 《地震工程与结构动力学》2009,38(7):941-949
Response spectrum methods in earthquake‐resistant design sometimes require information on the spectral velocity (SV) for a given single‐degree‐of‐freedom oscillator and specified seismic hazard. SV has been conventionally approximated as pseudo spectral velocity (PSV) in the case of lightly damped structures that are not too flexible. This study shows that the PSV approximation may lead to large overestimation errors when the structure is stiffer to the ground motion and the ground motion is a long‐period motion. It is also shown that a new approximation requiring the use of peak ground acceleration of the motion may significantly reduce these errors. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
12.
Structures undergoing inelastic displacements during earthquake ground motions are known to sustain some amount of residual displacements, which may make those unusable or unsafe. In this study an attempt is made to estimate residual displacements for elastic-perfectly-plastic single-degree-of-freedom oscillators with a given ductility ratio. Such oscillators belong to the class of bilinear hysteresis models applicable to steel structures, with post-yield-stiffness ratio taken as zero, and may be used for the conservative estimates of residual displacements when the post-yield-stiffness ratio is unlikely to become negative. Statistical estimation of residual displacement spectrum via normalization with respect to inelastic or elastic spectral displacements is considered and expressions are proposed for both types of normalizations. The statistical dependence of residual displacement on the seismological and site parameters and strong motion duration is also studied and a simple scaling model is proposed in terms of earthquake magnitude, epicentral distance, and geologic site condition parameter for the seismic region of western U.S.A. According to this model, the variation of residual displacement with period primarily depends on the site conditions, and the residual displacements are more sensitive to ductility ratio at low ductility ratios. 相似文献
13.
The available models for eff ective periods of site and structure are reviewed in context of frequency tuning in the inelastic seismic response of soil-structure system. The eff ect of seismic intensity and ductility demand, on the eff ective periods, is investigated, and inelastic site amplifi cation is shown to be strongly correlated to the normalized eff ective period. Two non-dimensional parameters, analogous to the conventional site amplifi cation factors in codes, are defi ned to quantify the inelastic site amplifi cation. It is shown that the inelastic site amplifi cation factor (i.e. ratio of constant ductility spectral ordinates at soil site to those at rock outcrop) is able to represent the site eff ects more clearly, as compared to the inelastic site amplifi cation ratio (i.e. ratio of inelastic spectral ordinates at soil site to the corresponding elastic spectral ordinates at rock outcrop). Further, the peak in the amplifi cation factor corresponding to the eff ective site period diminishes rapidly with increasing ductility demand. 相似文献
14.
Displacement response spectrum (DRS), as the input, is of great significance to the displacement-based design just like the acceleration response spectrum to the traditional force-based design. Although the procedure of performance-based, in particular the displacement-based design has achieved considerable development, there is not a general DRS covering an enough long period range for common seismic design yet. This paper develops a systematic ground motion data processing procedure for the purpose of correcting the noise in the earthquake records and generating consistent DRS for seismic design. An adaptive algorithm is proposed to determine the cutoff frequency of the high-pass digital filter. The DRS of more than 500 recorded earthquake ground motions are generated and they are classified into three groups according to the ratio of the peak ground acceleration to the peak ground velocity (A/V) and/or the ratio of the peak ground velocity to the peak ground displacement (V/D). In each group, all the ground motions are normalized with respect to a selected scaling factor. Their corresponding DRS are obtained and then averaged to get the mean and standard deviation DRS, which can be used for both deterministic and probabilistic displacement-based design. 相似文献
15.
16.
Jorge M. Gaspar-Escribano Manuel Navarro Belén Benito Antonio García-Jerez Francisco Vidal 《Bulletin of Earthquake Engineering》2010,8(6):1547-1567
An approach that relates results from a regional seismic hazard assessment study with local-scale site-effect characterizations
in an area of low-to-moderate seismic activity such as Andalusia (southern Spain), is presented. Results of a previous probabilistic
seismic hazard analysis of Andalusia on rock conditions are disaggregated to infer hazard controlling earthquakes for different
target motions. A collection of controlling magnitude-distance pairs and the corresponding site-specific response spectra
at main capital cities of the region are obtained. These spectra are first-order approximations to expected seismic actions
required in local earthquake risk assessments. In addition, results of independent, local-scale studies developed in Almeria
City (SE Andalusia) are used to derive an updated seismic zonation of the city. These include predominant soil period estimates
and shear-wave velocity profiles at different locations. If a local seismic risk assessment study or an earthquake-resistant
structural design is to be developed, it may be recommended the use of different seismic actions on sites characterized by
distinct response to seismic shaking (as derived from the seismic zonation). The seismic action related to worst-case scenarios
may be modeled through a hazard-consistent response spectrum, obtained by hazard disaggregation at the spectral acceleration
with period matching the prevailing resonant period of the target site or structure. 相似文献
17.
Iunio Iervolino Eugenio Chioccarelli Vincenzo Convertito 《Soil Dynamics and Earthquake Engineering》2011
To define reference structural actions, engineers practicing earthquake resistant design are required by codes to account for ground motion likely to threaten the site of interest and also for pertinent seismic source features. In most of the cases, while the former issue is addressed assigning a mandatory design response spectrum, the latter is left unsolved. However, in the case that the design spectrum is derived from probabilistic seismic hazard analysis, disaggregation may be helpful, allowing to identify the earthquakes having the largest contribution to the hazard for the spectral ordinates of interest. Such information may also be useful to engineers in better defining the design scenario for the structure, e.g., in record selection for nonlinear seismic structural analysis. On the other hand, disaggregation results change with the spectral ordinate and return period, and more than a single event may dominate the hazard, especially if multiple sources affect the hazard at the site. This work discusses identification of engineering design earthquakes referring, as an example, to the Italian case. The considered hazard refers to the exceedance of peak ground acceleration and 1s spectral acceleration with four return periods between 50 and 2475 year. It is discussed how, for most of the Italian sites, more than a design earthquake exists, because of the modeling of seismic sources. Furthermore, it is explained how and why these change with the limit state and the dynamic properties of the structure. Finally, it is illustrated how these concepts may be easily included in engineering practice complementing design hazard maps and effectively enhancing definition of design seismic actions with relatively small effort. 相似文献
18.
剪切型结构的抗震强度折减系数研究 总被引：1，自引：0，他引：1
为了研究剪切型结构抗震强度需求的变化规律,本文基于单自由度体系的非线性时程分析,研究了不同场地条件下延性折减系数与位移延性系数和结构自振周期的关系;采用修正等效单自由度体系位移延性折减系数的方法,研究了剪切型多自由度体系的延性折减系数;以基于中国建筑抗震规范设计的代表不同抗震能力要求的RC框架结构为分析对象,通过静力弹塑性分析,研究了RC框架结构的体系超强能力。分析结果表明场地类别、位移延性水准和结构振动周期对单自由度体系的延性折减系数有显著的影响;多自由度体系的抗震延性折减系数明显比其相应的等效单自由度体系的抗震延性折减系数小;RC框架结构的超强系数一般随结构楼层数的增加而减小,随抗震设防烈度的增大而减小,内框架的超强系数比边框架的超强系数大。 相似文献
19.
Seismic reliability‐based ductility demand evaluation for inelastic base‐isolated structures with friction pendulum devices 下载免费PDF全文
下载免费PDF全文 The aim of this work is to propose seismic reliability‐based relationships between the strength reduction factors and the displacement ductility demand of nonlinear structural systems equipped with friction pendulum isolators (FPS) depending on the structural properties. The isolated structures are described by employing an equivalent 2dof model characterized by a perfectly elastoplastic rule to account for the inelastic response of the superstructure, whereas, the FPS behavior is described by a velocity‐dependent model. An extensive parametric study is carried out encompassing a wide range of elastic and inelastic building properties, different seismic intensity levels and considering the friction coefficient as a random variable. Defined a set of natural seismic records and scaled to the seismic intensity corresponding to life safety limit state for L'Aquila site (Italy) according to NTC08, the inelastic characteristics of the superstructures are designed as the ratio between the average elastic responses and increasing strength reduction factors. Incremental dynamic analyses (IDAs) are developed to evaluate the seismic fragility curves of both the inelastic superstructure and the isolation level assuming different values of the corresponding limit states. Integrating the fragility curves with the seismic hazard curves related to L'Aquila site (Italy), the reliability curves of the equivalent inelastic base‐isolated structural systems, with a design life of 50 years, are derived proposing seismic reliability‐based regression expressions between the displacement ductility demand and the strength reduction factors for the superstructure as well as seismic reliability‐based design (SRBD) abacuses useful to define the FPS properties. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
20.
The estimation of cyclic deformation demand resulting from earthquake loads is crucial to the core objective of performance‐based design if the damage and residual capacity of the system following a seismic event needs to be evaluated. A simplified procedure to develop the cyclic demand spectrum for use in preliminary seismic evaluation and design is proposed in this paper. The methodology is based on estimating the number of equivalent cycles at a specified ductility. The cyclic demand spectrum is then determined using well‐established relationships between seismic input energy and dissipated hysteretic energy. An interesting feature of the proposed procedure is the incorporation of a design spectrum into the proposed procedure. It is demonstrated that the force–deformation characteristics of the system, the ductility‐based force‐reduction factor Rμ, and the ground motion characteristics play a significant role in the cyclic demand imposed on a structure during severe earthquakes. Current design philosophy which is primarily based on peak response amplitude considers cyclic degradation only in an implicit manner through detailing requirements based on observed experimental testing. Findings from this study indicate that cumulative effects are important for certain structures, classified in this study by the initial fundamental period, and should be incorporated into the design process. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献