共查询到20条相似文献，搜索用时 125 毫秒
1.
通过对红星山铅锌银多金属矿床的研究,矿体产于晚元古界青白口系天湖群变质岩系地层内。控矿因素为地层和构造动力,找矿标志:含碳白云石大理岩破碎蚀变带;沿天山老地块中近东西向的层间断裂带;围岩蚀变:硅化、褐铁矿化、黄铁矿化、碳酸盐化;地表铁帽及地表露头中的方铅矿化、孔雀石化可作为直接找矿标志;原生晕组合AgPbZnSb及电磁异常可作为间接找矿标志。本区矿床是有中低温热液叠加作用的破碎蚀变岩型铅锌银多金属矿床。 相似文献
2.
西藏蒙亚啊铅锌矿床S、Pb同位素组成及对成矿物质来源的示踪 总被引：11，自引：3，他引：8
西藏蒙亚啊铅锌矿床位于冈底斯成矿带东段,矿体主要赋存于上石炭统—下二叠统来姑组碳酸盐岩内的矽卡岩和矽卡岩化大理岩中,近东西向似层状产出。在分析该矿床成矿地质条件的基础上,系统地研究了矿石硫、铅同位素组成特征,探讨了成矿物质来源。研究表明,矿石硫化物的硫同位素组成变化范围较窄,具塔式分布效应,估算得到成矿热液系统的总硫同位素值3δ4S∑S约为5.2‰,具有岩浆硫的特征;矿石铅同位素组成稳定,为正常普通铅,矿石铅来源于早白垩世上地壳物质部分熔融形成的岩浆。 相似文献
3.
东天山彩霞山大型铅锌矿床位于中天山地块北缘,矿体主要产于白云石大理岩与下伏的硅化粉砂岩接触部位,其热液期成矿作用可分为4个阶段：黄铁矿阶段、闪锌矿-黄铁矿阶段、闪锌矿-磁黄铁矿-透闪石阶段、硫盐-方铅矿阶段。前人获得成矿时代数据范围跨度大,直接影响了对矿床成因的认识。本次工作选取不同矿体矿石中33件金属硫化物,分期次开展Rb-Sr同位素测年,获得了（326.5±4.2）Ma、(315.3～312.9) Ma、(302.3～299) Ma等前3个成矿阶段的年龄,结合成矿地质特征和前人有关东天山区域构造演化的研究成果,认为彩霞山铅锌矿的成矿构造背景为弧前盆地向弧内盆地转换阶段,是东天山造山带晚石炭世构造-岩浆活动的产物。 相似文献
4.
云南禄劝噜鲁铅锌矿床地处扬子地块西南缘,矿体赋存于下寒武统梅树村组下段,呈脉状、似层状产出。矿石矿物主要有方铅矿、闪锌矿、黄铁矿等;脉石矿物主要有重晶石、石英、方解石。噜鲁铅锌矿床硫化物成矿时的~(87)Sr/~(86)Sr值为0.7112~0.7115,暗示成矿物质可能来自于基底地层;Rb-Sr等时线年龄为202.8±1.4Ma,成矿年龄为印支晚期—燕山早期。硫化物硫同位素组成δ~(34)S变化范围为6.33‰~9.75‰,暗示成矿流体中的硫主要是海相硫酸盐热化学还原的产物;铅同位素~(206)Pb/~(204)Pb、~(207)Pb/~(204)Pb、~(208)Pb/~(204)Pb变化范围分别为18.259~18.342、15.608~15.639、38.46~38.821,位于上地壳和造山带铅演化线之间,落入基底岩石(昆阳群)及不同时代碳酸盐岩铅同位素组成范围内,表明成矿物质具有壳源特征,主要由基底岩石提供。综合各类地质-地球化学信息认为,噜鲁铅锌矿床成矿流体中不同组分来源不同,但主要来自于基底地层,成矿机制是在印支运动强驱动力的作用下,促使含矿基底地层成矿元素活化-迁移混合-空间就位,形成工业矿床。 相似文献
5.
本文报道了内蒙古狼山成矿带内两个最大的铅锌多金属硫化物矿床——东升庙矿床和炭窑口矿床中黄铁矿、黄铜矿单矿物的铁同位素研究结果。东升庙矿床绢云石墨片岩中不规则状黄铁矿的铁同位素组成δ~(56)Fe_(-IRMM)值在+0.04‰~+1.11‰之间,呈现铁的重同位素富集,指示了海水中的铁以氧化态沉淀并在成岩期转化成黄铁矿的矿化过程。东升庙和炭窑口矿床富硫化物矿石中黄铁矿和黄铜矿的铁同位素组成δ~(56)Fe_(-IRMM)值的变化范围为-1.33‰~+0.08‰,具有热液成矿特征,指示金属成矿物质来源于热液流体。另外,绢云石墨片岩中脉状黄铁矿的铁同位素组成δ~(56)Fe_(-IRMM)值的变化范围为-0.39‰~-0.04‰,处于矿石黄铁矿和围岩不规则状黄铁矿之间,指示脉状黄铁矿是热液矿化的产物,并在成矿过程中混入了围岩中早先形成的富集铁的重同位素的黄铁矿。绢云石墨片岩中广泛发育的不规则状黄铁矿与赋存在绢云石墨片岩中的富硫化物矿体具有完全不同的铁同位素组成,指示热液活动对不规则状黄铁矿没有明显成矿物质贡献,因此同沉积热液活动成矿的可能性不大。结合赋存在白云石大理岩中硫化物矿体的顶、底部常见硅化的白云石大理岩角砾,本文提出后生矿化是东升庙多金属硫化物矿体的主要成矿方式。另外,东升庙矿床和炭窑口矿床的矿石硫化物具有相似的铁同位素组成特征,指示两者的成矿物质来源具有相似性。 相似文献
6.
湘南宝山铅锌矿床硫、铅、碳、氧同位素特征及成矿物质来源 总被引：3，自引：1，他引：2
宝山铅锌矿床是湘南地区代表性矿床之一。宝山铅锌矿床的成矿作用与156~158 Ma的宝山花岗闪长斑岩密切相关。花岗闪长斑岩主要由古老地壳部分熔融而成。为确定成矿物质来源,文章系统研究了宝山铅锌矿床的硫、铅、碳、氧同位素组成特征。矿床中硫化物黄铁矿、闪锌矿、方铅矿的δ34S值呈狭窄的塔式分布,变化在-2.17‰~6.46‰之间,平均值为3.13‰。δ34S值总体表现为δ34S黄铁矿δ34S闪锌矿δ34S方铅矿,表明硫同位素分馏基本达到了平衡。矿石、花岗闪长斑岩和赋矿地层硫同位素对比研究表明,矿石中的硫主要由岩浆分异演化而来,岩浆中的硫主要来自古老地壳。矿石206Pb/204Pb、207Pb/204Pb和208Pb/204Pb比值分别为18.188~18.844、15.661~15.843和38.562~39.912,赋矿地层206Pb/204Pb、207Pb/204Pb和208Pb/204Pb比值分别为18.268~19.166、15.620~5.721和38.364~39.952。矿石铅同位素组成比地层中的更富放射性成因铅,矿石中部分铅来自宝山花岗闪长质岩浆,在成矿流体运移过程中有部分地层铅参与了成矿,岩浆中的铅主要来自古老地壳。热液方解石的碳、氧同位素组成介于岩浆和赋矿碳酸盐岩的碳、氧同位素之间,主要是由于岩浆流体和碳酸盐岩不同比例的水岩反应所致,测水组有机碳的加入造成了部分热液方解石δ13CPDB值偏低。 相似文献
7.
辽宁青城子榛子沟脉状铅锌矿成矿流体地球化学初探 总被引：9，自引：4，他引：5
位处华北地台北缘东段辽吉裂谷内的青城子矿区是中国重要的铅锌矿集区,产出有多处中、小型铅锌矿床,榛子沟铅锌矿床是其中的典型代表之一。该矿床赋存于古元古界辽河群浪子山组与大石桥组界面或浪子山组层间及大石桥组第三岩性段的大理岩中或斜长角闪岩、黑云母片岩与含石墨(条带)大理岩接触处靠近大理岩的一侧,矿体呈层状-似层状和脉状。文章对该矿床脉状矿体的稠密浸染状矿石的流体包裹体及其氢、氧同位素地球化学进行了研究,结果表明,成矿流体受到了后期热液系统中大气降水的混入,是一套H2O-CO2-NaCl流体体系。流体包裹体液相成分分析表明,成矿流体既具有岩浆热液的特点,又具有大气降水(或地层流体)的特点。石英内流体包裹体的δD为-85‰~-100‰、δ18OH2O值为1.85‰~4.45‰,表明成矿流体后期受大气降水的混入,致使氧同位素值朝大气降水方向漂移,偏离了正常岩浆水值。经综合分析认为,榛子沟铅锌矿床成矿期的成矿流体为大气降水与岩浆水混合成因。 相似文献
8.
为明确西华山钨矿床成矿物质的来源,本文以矿床中的硫化物和钾长石为研究对象,通过硫化物中硫、铅同位素的研究,对矿床成矿物质来源进行探讨。结果表明,矿石中黄铁矿δ34S值为-2.1‰~0.4‰,辉钼矿δ34S值为4‰~7.9‰,硫主要来源于岩浆。辉钼矿、黄铁矿、钾长石的206 Pb/204 Pb值分别为18.718~18.849、18.640~18.745、18.698~18.792;207Pb/204Pb值分别为15.762~15.770、15.704~15.747、15.697~15.724;208 Pb/204 Pb值分别为39.094~39.134、38.902~39.056、38.904~39.012。由此判断矿床中矿石铅与岩石铅同位素组成具有同源关系,矿石铅主要来自与岩浆作用有关的上地壳;成矿物质来源于上地壳重熔形成的花岗岩浆,即上地壳岩浆侵位,为成矿作用提供部分成矿物质,同时也暗示成矿物质是由体现壳源特征的西华山复式岩体提供。 相似文献
9.
西藏邦铺铅锌矿床S、Pb、C、O同位素组成及成矿物质来源研究 总被引：2，自引：0，他引：2
邦铺铅锌矿床系邦铺钼铜矿区斑岩矿化体外围形成的矽卡岩型铅锌矿床;矿石品位较富,成矿元素以铅锌为主,基本不含铜。文章以矿床中主要金属硫化物为研究对象,采用S、Pb同位素研究方法对矿床成矿物质来源进行探讨。结果表明,矿石金属硫化物δ34S值分布范围较宽,但主要集中于-3.7‰～-0.7‰之间,具塔式分布特征,硫主要来源于岩浆;矿石铅同位素组成稳定,为正常普通铅,矿石铅的高μ值(大于9.58)及构造环境演化图解中样品点的分布特征指示矿石铅主要来源于上地壳物质。与驱龙外围知不拉、甲玛矽卡岩矿体对比研究发现,3个矿床硫均为岩浆来源;而金属物质来源空间上则显示出一定的规律,驱龙—甲玛—邦铺矿集区由南向北壳源物质的混染作用不断增加;大理岩及方解石碳-氧同位素组成特征显示矿床成矿流体中碳源主要来自于岩浆,碳酸盐岩地层提供了部分成矿物质。 相似文献
10.
保山镇康地块矽卡岩型铅锌矿床成因初探 总被引：4，自引：0，他引：4
保山镇康地块是"三江"南段重要的铅锌多金属成矿区之一,地质构造复杂,铅锌成矿地质条件优越,其中核桃坪与芦子园是近年发现的两个大型铅锌矿床,矿床受近NE向断裂、背斜轴部和地层控制明显,上寒武统核桃坪组与沙河床组大理岩化灰岩为主要赋矿地层,近矿围岩矽卡岩化强烈,流体包裹体,Pb、S、H、O同位素和微量元素等地球化学对比研究表明:核桃坪和芦子园铅锌矿床均经历了中温、高温两个矿化阶段;核桃坪铅锌矿床矿石铅同位素较芦子园铅锌矿床有较高的比值和较大的变化范围,均以高μ值为特征,属于放射性成因铅,暗示其成矿物质以壳源铅为主;硫化物硫同位素均多为较低正值并呈塔式分布,具有岩浆硫特征,两者均无生物硫酸盐热化学还原作用的参与,其中硫同位素分馏已达平衡;与硫化物共生的石英δDH2O(-109‰~-91‰)和δ18OH2O(-4.3‰~2.3‰)同位素研究表明核桃坪矿床成矿流体主要来自深部岩浆水,并遭受后期大气降水或地层水的混合;核桃坪矿床与芦子园矿床的微量元素具有岩浆热液型矿床特征,不同于VMS型、MVT型铅锌矿床。因此,笔者认为两个矿床应属于与深部隐伏岩体有关的中-高温矽卡岩型铅锌矿床,矿区深部隐伏岩体的侵入产生岩浆热液并携带Pb、Zn等成矿物质与地层水或大气降水混合,在背斜轴部与NE向断裂的交汇处形成该类型矿床。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
14.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
16.
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献
19.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献
20.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献