共查询到20条相似文献，搜索用时 171 毫秒
1.
汕头沿岸水体沙壳纤毛虫季度变化 总被引：1，自引：0，他引：1
在2007年枯水期(4月)和丰水期(11月)期间,对汕头沿岸海区沙壳虫进行了采样研究,探讨了沙壳虫的空间分布和种类组成.调查发现,除了表层海水温度以外,表层海水盐度、硝酸盐浓度、硅酸盐浓度均是春季低于秋季.在两个季节的5个采样点共鉴定出7属14种沙壳纤毛虫,其中优势种均为简单薄铃虫Lepmtintinnus simpl... 相似文献
2.
热带西太平洋浮游纤毛虫的垂直分布 总被引：3，自引：2，他引：1
于2014年12月至2015年1月在热带西太平洋沿台湾南部到雅浦海山一个断面和雅浦海山海区研究了浮游纤毛虫丰度和生物量的垂直分布。浮游纤毛虫丰度变化范围为0—635ind./L,生物量范围为0—1.53μg C/L,丰度和生物量高值分布于200m以浅,其中,砂壳纤毛虫丰度为0—45ind./L,占总纤毛虫丰度的比例在0—14.62%之间。浮游纤毛虫丰度垂直分布均呈现"双峰型"模式:在表层和叶绿素极大值层(DCM)出现高值。共鉴定出砂壳纤毛虫33属76种。雅浦海山海区优势种为纤弱细瓮虫、卢氏真铃虫、管状真铃虫、膨大波膜虫,西太平洋海区优势种为纤弱细瓮虫、海勒斯真铃虫、酒杯类管虫、尖锐号角虫。有些种类分布在100m以浅,有的种类分布在100m以深,说明砂壳纤毛虫在100m水深左右种类发生变化。 相似文献
3.
研究了杂色鲍(Haliotisdiversicolor)越冬期养殖环境中的浮游动物种类组成和密度变化。共检测到浮游动物33种,其中纤毛虫(Ciliata)23种,鞭毛虫(Mastigophora)5种,轮虫(Rotatoria)4种,桡足类(Copepoda)1种。优势种是奇异猛水蚤(Miraciaefferata)和海洋尾丝虫(Uromenamarinam);钩状狭甲轮虫(Colurellauncinata)和偏体虫(Dysterialancolata)为常见种。砂井水养殖可以减少养殖环境中原生动物以外的各种浮游动物种类。 相似文献
4.
5.
为了探明热带西太平洋海区砂壳纤毛虫的多样性、垂直分布及纬向变化，我们于2012年11-12月在该海区四个断面采集了0-200 m的水样。共检出砂壳纤毛虫39属124种，多数种类喜好生活在表层和次表层。砂壳纤毛虫种丰富度、丰度以及多样性指数的高值主要出现在比叶绿素浓度最大值稍浅的位置，与温度和叶绿素浓度显著正相关，与盐度和采样深度显著负相关。多数优势种与环境因子间的相关性不显著。热带西太平洋海区砂壳纤毛虫多样性极高，各站种丰富度在25-52之间。在从表层至75 m处的多数采样点香农指数均大于3。该海区砂壳纤毛虫冗余种的比例很高，占砂壳纤毛虫总种类数的87.90%，贡献了砂壳纤毛虫60.38%的丰度，表明热带西太平洋海区砂壳纤毛虫群落对饵料组成和摄食压力改变的应对能力很强，稳定性很高。 相似文献
6.
报道了2009年夏季北部湾A、B两个断面浮游纤毛虫的丰度和生物量。纤毛虫的平均丰度为521±369个·L-1,平均生物量(以碳为单位)为0.63±0.54μg·L-1。表层纤毛虫丰度和生物量的水平分布格局基本一致,高值主要位于湾的北部近岸、西南部近岸及湾中部A5站。两个断面纤毛虫丰度和生物量的垂直分布特点不同,纤毛虫在A断面水体中的垂直分布较均匀,在B断面主要分布在15m层以浅。共鉴定出砂壳纤毛虫13属20种,其中较为优势的种类为原始筒壳虫Tintinnidium primitivum、薄壳真铃虫Eutintinnus tenuis、三亚条纹虫Rhabdonella sanyahensis、未定种砂壳纤毛虫和斯氏拟铃虫Tintinnopsis schotti,且表现出不同的水平分布和垂直分布规律。 相似文献
7.
鲍人工养成阶段养殖环境中的周丛纤毛虫 总被引：2，自引：1，他引：2
应用定性和定量方法,研究了人工养成阶段杂色鲍Haliotis diversicolor外壳的周丛纤毛虫的种类组成和优势类群演变。共观察到3纲9目35属58种纤毛虫,缘毛类Peritrichida的种类最多,有23种。在养成阶段的早期,周丛纤毛虫的优势类群为钟虫类;在养成阶段的中、后期,周丛纤毛虫的优势类群演变为聚缩虫类,其中交替聚缩虫Zoothamnium alternans占绝对优势;文中还对各种环境因子对养殖环境中的周丛纤毛虫的影响进行了分析。 相似文献
8.
于2012年11月18日至12月21日,在黄、东海沿从南向北(26~36°N)一个断面24个站采样调查了表层(4 m)砂壳纤毛虫群落。共发现砂壳纤毛虫17属,32种。各站砂壳纤毛虫种丰富度为2~15种,砂壳纤毛虫总丰度为2 478~88 550个/m3。整个断面优势种为筒状拟铃虫、白领细壳虫、小领细壳虫和钝囊坎虫。巴西拟铃虫仅出现在青岛近岸(24号站),但丰度很高(10 960个/m3)。砂壳纤毛虫种类多样性从南向北降低,从近岸向远岸增加,黏着壳的比例在近岸水浅处较多,在水深大于50 m的站位,透明壳所占比例大大增加。不同种类的砂壳纤毛虫有着不同的分布区域,根据分布区域的不同,可分为南方种,北方种和广布种等。聚类分析结果显示,调查区的砂壳纤毛虫可以分为3个群落。 相似文献
9.
浮游纤毛虫是真核微型生物的重要类群,在浮游生态系统中发挥着重要作用。利用传统形态学与高通量测序技术相结合的方法,于2020年9月至2021年8月对莱州湾三山岛近岸浮游纤毛虫进行每月两次的调查。对环境DNA的18S rRNA基因的V4区进行高通量测序,结果显示无壳寡毛类(占纤毛虫序列丰度的40.14%)和砂壳纤毛虫(10.67%)是优势类群,并且具有明显的季节变化。无壳寡毛类在冬季序列相对丰度最高,主要由急游虫属(Strombidium)和急游虫科未定类群(Strombidiidae_X)组成;砂壳类在春夏季序列相对丰度最高,主要由砂壳目未定类群(Tintinnida_XX)和拟铃虫属(Tintinnopsis)组成。浮游纤毛虫群落的β多样性呈现显著的季节变化,而α和β多样性在站点间差异均不显著。与环境因子的RDA分析显示,总有机碳和溶解氧含量是影响纤毛虫群落结构的主要环境驱动因子。形态学方法共检获鉴定17种纤毛虫,分别隶属于7个属,其中砂壳类在多样性和检获频率上均为最优势类群。研究填补了莱州湾三山岛海域浮游纤毛虫的多样性、群落结构和季节动态研究的空白,同时为深入研究温带海湾近岸浮游纤毛虫群落的长期变化规律以及对环境因子的响应机制提供本底资料。 相似文献
10.
《热带海洋学报》2017,(1)
浮游纤毛虫广泛分布于海洋环境中,是连接微食物环和经典食物链的关键环节,在生态系统的物质传递和能量流通中占据重要地位。为深入认识纤毛虫在热带海区的分布特征及其生态功能,于2014年4月在三亚湾近岸海区设置昼夜连续监测站点,分早晨(6:00)、中午(12:00)、傍晚(18:00)和夜晚(24:00)四个时间点分别采集浮游纤毛虫及环境因子检测样品,并用分子生物学方法分析了表层水体浮游纤毛虫群落结构的昼夜变化特征。结果显示:1)表层浮游纤毛虫多样性高,共获得79条不同代表序列;2)不同时间表层海水中浮游纤毛虫多样性差异显著,表现为白天降低,夜晚升高,其多样性高低依次为:早晨[48个操作分类单元(operational taxonomic unit,OTU)]夜晚(37个OTU)傍晚(32个OTU)中午(29个OTU)。浮游纤毛虫群落结构表现出昼夜变化现象,可能是因为不同类群纤毛虫具有不同的空间分布规律。 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
13.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
14.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
15.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
16.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
20.