首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 203 毫秒
1.
《水文科学杂志》2012,57(2):269-280
ABSTRACT

An algorithm is proposed to find an appropriate selection of available watershed features for the regionalization of watersheds. Also, the algorithm is able to determine an appropriate number of regions for regional flood frequency analysis. The proposed algorithm is applied to data related to the Karun-e-Bozorg basin in the southwest of Iran. The results show that the proposed algorithm is efficient to find an appropriate selection of watershed features and an appropriate number of regions for regionalization, in the study area. It decreased the number of assessed regionalization states from 1020 to 252. In addition, applying the proposed algorithm mostly improved the accuracy of flood quantile estimates in the study area. The performance of the algorithm was evaluated through Monte Carlo simulation experiments. The results indicate that the efficiency of the algorithm increases by increasing the number of available watershed features.  相似文献   

2.
Due to the severity related to extreme flood events, recent efforts have focused on the development of reliable methods for design flood estimation. Historical streamflow series correspond to the most reliable information source for such estimation; however, they have temporal and spatial limitations that may be minimized by means of regional flood frequency analysis (RFFA). Several studies have emphasized that the identification of hydrologically homogeneous regions is the most important and challenging step in an RFFA. This study aims to identify state‐of‐the‐art clustering techniques (e.g., K ‐means, partition around medoids, fuzzy C‐means, K ‐harmonic means, and genetic K ‐means) with potential to form hydrologically homogeneous regions for flood regionalization in Southern Brazil. The applicability of some probability density function, such as generalized extreme value, generalized logistic, generalized normal, and Pearson type 3, was evaluated based on the regions formed. Among all the 15 possible combinations of the aforementioned clustering techniques and the Euclidian, Mahalanobis, and Manhattan distance measures, the five best were selected. Several watersheds' physiographic and climatological attributes were chosen to derive multiple regression equations for all the combinations. The accuracy of the equations was quantified with respect to adjusted coefficient of determination, root mean square error, and Nash–Sutcliffe coefficient, whereas, a cross‐validation procedure was applied to check their reliability. It was concluded that reliable results were obtained when using robust clustering techniques based on fuzzy logic (e.g., K ‐harmonic means), which have not been commonly used in RFFA. Furthermore, the probability density functions were capable of representing the regional annual maximum streamflows. Drainage area, main river length, and mean altitude of the watershed were the most recurrent attributes for modelling of mean annual maximum streamflow. Finally, an integration of all the five best combinations stands out as a robust, reliable, and simple tool for estimation of design floods.  相似文献   

3.
Observed data at most stations are often inadequate to obtain reliable estimates of many hydro-meteorological variables that not only define water availability across a region but also the vulnerability of social infrastructure to climatic extremes. To overcome this, data from neighboring sites with similar statistical characteristics are often pooled. The pooling process is based on partitioning of a larger region into smaller sub-regions with homogeneous features of interest. The established approaches rely heavily on statistics computed from observed precipitation data rather than the covariates that play a significant role in modulating the regional and local climate patterns at various temporal and spatial scales. In this study, a new approach for identifying homogeneous regions for regionalization of precipitation characteristics is proposed for the Canadian Prairie Provinces. This approach incorporates information about large-scale atmospheric covariates, teleconnection indices and geographical site attributes that impact spatial patterns of precipitation in order to delineate homogeneous precipitation regions through combined use of multivariate approaches—principal component analysis, canonical correlation analysis and fuzzy C-means clustering. Results of the analyses suggest that the study area can be partitioned into five homogeneous regions. These partitions are validated independently for homogeneity using statistics computed from monthly and seasonal precipitation totals, and seasonal extremes from a network of observation stations. Furthermore, based on the identified regions, precipitation magnitude-frequency relationships of warm and cold season single- and multi-day precipitation extremes, developed through regional frequency analysis, are mapped spatially. Such estimates are important for numerous water resources related activities.  相似文献   

4.
A methodology is proposed for the inference, at the regional and local scales, of flood magnitude and associated probability. Once properly set-up, this methodology is able to provide flood frequencies distributions at gauged and un-gauged river sections pertaining to the same homogeneous region, using information extracted from rainfall observations. A proper flood frequency distribution can be therefore predicted even in un-gauged watersheds, for which no discharge time series is available.  相似文献   

5.
The identification of homogeneous precipitation regions is essential in the planning, design and management of water resources systems. Regions are identified using a technique that partitions climate sites into groups based on the similarity of their attributes; the procedure is known as regionalization. In this paper the ability of four attribute sets to form large, coherent precipitation zones is assessed in terms of the regional homogeneity of precipitation statistics and computational efficiency. The outcomes provide guidance for effective attribute selection for future studies in Canada. The attributes under consideration include location parameters (latitude, longitude), distance to major water bodies, site elevation and atmospheric variables modelled at different pressure levels. The analysis is conducted in two diverse climate regions within Canada including the Prairie and the Great Lakes–St Lawrence lowlands regions. The method consists of four main steps: (i) formation of the attribute sets; (ii) determination of the preferred number of regions (selection of the c-value) into which the sites are partitioned; (iii) regionalization of climate sites using the fuzzy c-means clustering algorithm; and (iv) validation of regional homogeneity using L-moment statistics. The results of the attribute formation, c-value selection, regionalization and validation processes are presented and discussed in a comparative analysis. Based on the results it is recommended for both regions to use location parameters including latitude, longitude and distance to water bodies (in the Great Lakes region) to form precipitation regions and to consider atmospheric variables for future (climate change) applications of the regionalization procedure.  相似文献   

6.
Five alternative regionalization approaches in two broad categories, named function‐free and functional approaches, have been proposed to predict periodic behaviours in the basic parameters of monthly stream flows throughout homogeneous regions defined. Function‐free and functional approaches rely on the standardized (or normalized) forms of raw and fitted values of the monthly periodic parameters considered. Homogeneous regions are identified based on these standardized/normalized parameters by means of the hierarchical clustering analysis. The proposed models are tested for two major river basins in south Turkey. It is concluded that the proposed regional models are very effective to estimate periodic behaviour of monthly flows. The functional approaches are quite plausible, and the function‐free approach needs much more parameters. Both types of regionalization approaches can be reliably used to get regional monthly flow estimates for the flow sections where monthly records are not available or too short. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

7.
Reliable estimation of low flows at ungauged catchments is one of the major challenges in water‐resources planning and management. This study aims at providing at‐site and ungauged sites low‐flow frequency analysis using regionalization approach. A two‐stage delineating homogeneous region is proposed in this study. Clustering sites with similar low‐flow L‐moment ratios is initially conducted, and L‐moment‐based discordancy and heterogeneity measures are then used to detect unusual sites. Based on the goodness‐of‐fit test statistic, the best‐fit regional model is identified in each hydrologically homogeneous region. The relationship between mean annual 7‐day minimum flow and hydro‐geomorphic characteristics is also constructed in each homogeneous region associated with the derived regional model for estimating various low‐flow quantiles at ungauged sites. Uncertainty analysis of model parameters and low‐flow estimations is carried out using the Bayesian inference. Applied in Sefidroud basin located in northwestern Iran, two hydrologically homogeneous regions are identified, i.e. the east and west regions. The best‐fit regional model for the east and west regions are generalized logistic and Pearson type III distributions, respectively. The results show that the proposed approach provides reasonably good accuracy for at‐site as well as ungauged‐site frequency analysis. Besides, interval estimations for model parameters and low flows provide uncertainty information, and the results indicate that Bayesian confidence intervals are significantly reduced when comparing with the outcomes of conventional t‐distribution method. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

8.
  相似文献   

9.
Flood frequency analysis is usually based on the fitting of an extreme value distribution to the local streamflow series. However, when the local data series is short, frequency analysis results become unreliable. Regional frequency analysis is a convenient way to reduce the estimation uncertainty. In this work, we propose a regional Bayesian model for short record length sites. This model is less restrictive than the index flood model while preserving the formalism of “homogeneous regions”. The performance of the proposed model is assessed on a set of gauging stations in France. The accuracy of quantile estimates as a function of the degree of homogeneity of the pooling group is also analysed. The results indicate that the regional Bayesian model outperforms the index flood model and local estimators. Furthermore, it seems that working with relatively large and homogeneous regions may lead to more accurate results than working with smaller and highly homogeneous regions.  相似文献   

10.
Abstract

A new technique is developed for identifying groups for regional flood frequency analysis. The technique uses a clustering algorithm as a starting point for partitioning the collection of catchments. The groups formed using the clustering algorithm are subsequently revised to improve the regional characteristics based on three requirements that are defined for effective groups. The result is overlapping groups that can be used to estimate extreme flow quantiles for gauged or ungauged catchments. The technique is applied to a collection of catchments from India and the results indicate that regions with the desired characteristics can be identified using the technique. The use of the groups for estimating extreme flow quantiles is demonstrated for three example sites.  相似文献   

11.
The index flood method is widely used in regional flood frequency analysis (RFFA) but explicitly relies on the identification of ‘acceptable homogeneous regions’. This paper presents an alternative RFFA method, which is particularly useful when ‘acceptably homogeneous regions’ cannot be identified. The new RFFA method is based on the region of influence (ROI) approach where a ‘local region’ can be formed to estimate statistics at the site of interest. The new method is applied here to regionalize the parameters of the log‐Pearson 3 (LP3) flood probability model using Bayesian generalized least squares (GLS) regression. The ROI approach is used to reduce model error arising from the heterogeneity unaccounted for by the predictor variables in the traditional fixed‐region GLS analysis. A case study was undertaken for 55 catchments located in eastern New South Wales, Australia. The selection of predictor variables was guided by minimizing model error. Using an approach similar to stepwise regression, the best model for the LP3 mean was found to use catchment area and 50‐year, 12‐h rainfall intensity as explanatory variables, whereas the models for the LP3 standard deviation and skewness only had a constant term for the derived ROIs. Diagnostics based on leave‐one‐out cross validation show that the regression model assumptions were not inconsistent with the data and, importantly, no genuine outlier sites were identified. Significantly, the ROI GLS approach produced more accurate and consistent results than a fixed‐region GLS model, highlighting the superior ability of the ROI approach to deal with heterogeneity. This method is particularly applicable to regions that show a high degree of regional heterogeneity. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

12.
Ecological geographic regions, also called eco-regions, can be used to divide a remotely sensed image, which is helpful for reducing the complexity of land cover types within eco-regions and for improving the classification accuracy of land cover. In this case study in China, we improved a method of ecological geographic regionalization that is more suitable for remote sensing mapping of regional land cover, and we obtained new eco-regions. The canonical correspondence analysis (CCA) and k-means clustering were adopted in the ecological geographic regionalization using both seasonal remotely-sensed vegetation information and environmental data including climate, elevation and soil features. Our results show that the combination of seasonal vegetation information and the CCA performed well in the selection of the dominant environmental factor of the biogeographic pattern, and it can be used as regionalization indicators of eco-regions. We found that thermal factors are the most important driving forces of the biogeographic pattern in China, which followed by moisture factors. Two global land cover products (MODIS MCD12C1 and GlobCover) were used to assess our eco-regions. The results show that our eco-regions performed better than that of a previous study regarding the complexity of land cover types, such as in the number of types and the proportional area of the major/secondary type. These results indicate that the method of ecological geographic regionalization, which is based on environmental factors associated with seasonal vegetation features, is effective for reducing the regional complexity of land cover.  相似文献   

13.
Abstract

A canonical correlation method for determining the homogeneous regions used for estimating flood characteristics of ungauged basins is described. The method emphasizes graphical and quantitative analysis of relationships between the basin and flood variables before the data of the gauged basins are used for estimating the flood variables of the ungauged basin. The method can be used for both homogeneous regions, determined a priori by clustering algorithms in the space of the flood-related canonical variables, as well as for “regions of influence” or “neighbourhoods” centred on the point representing the estimated location of the ungauged basin in that space.  相似文献   

14.
Large-scale flood modelling approaches designed for regional to continental scales usually rely on relatively simple assumptions to represent the potentially highly complex river bathymetry at the watershed scale based on digital elevation models (DEMs) with a resolution in the range of 25–30 m. Here, high-resolution (1 m) LiDAR DEMs are employed to present a novel large-scale methodology using a more realistic estimation of bathymetry based on hydrogeomorphological GIS tools to extract water surface slope. The large-scale 1D/2D flood model LISFLOOD-FP is applied to validate the simulated flood levels using detailed water level data in four different watersheds in Quebec (Canada), including continuous profiles over extensive distances measured with the HydroBall technology. A GIS-automated procedure allows to obtain the average width required to run LISFLOOD-FP. The GIS-automated procedure to estimate bathymetry from LiDAR water surface data uses a hydraulic inverse problem based on discharge at the time of acquisition of LiDAR data. A tiling approach, allowing several small independent hydraulic simulations to cover an entire watershed, greatly improves processing time to simulate large watersheds with a 10-m resampled LiDAR DEM. Results show significant improvements to large-scale flood modelling at the watershed scale with standard deviation in the range of 0.30 m and an average fit of around 90%. The main advantage of the proposed approach is to avoid the need to collect expensive bathymetry data to efficiently and accurately simulate flood levels over extensive areas.  相似文献   

15.
在半湿润半干旱地区,下垫面条件复杂,产流机制混合多变,而现有的水文模型由于其固定的结构和模式,无法灵活地模拟不同下垫面特征的洪水过程.本文利用CN-地形指数法将流域划分为超渗主导子流域和蓄满主导子流域.将新安江模型(XAJ)、新安江-Green-Ampt模型(XAJG)和Green-Ampt模型(GA)相结合,在子流域分类的基础上构建空间组合模型(SCMs),并在半湿润的东湾流域和半干旱的志丹流域进行检验.结果表明:东湾流域的参数由水文模型来主导;而志丹流域的参数受主导径流影响很大.在东湾流域,偏蓄满的模型模拟结果优于偏超渗的模型,且SCM2模型(XAJ和XAJG的组合模型)的模拟效果最好(径流深合格率为75%,洪峰合格率75%);而SCM5模型(GA和XAJG的组合模型)在以超渗产流为主的志丹流域模拟最好(径流深合格率53.3%,洪峰合格率53.3%).在半干旱半湿润流域,SCMs模型结构灵活,在地形和土壤数据的驱动下,具有更合理的模型结构和参数,模拟精度较高,适应性较强.  相似文献   

16.
Ali Sarhadi  Reza Modarres 《水文研究》2011,25(23):3613-3624
  相似文献   

17.
The primary purpose of this study is to develop regional models of the lower part of flow duration curves (LPFDCs) to synthesize low‐flow characteristics at ungauged sites in southern Taiwan. Because of the close relationship between low streamflow regimes and hydrogeological features, the model development first involved delimiting homogeneous hydrogeological regions by using two‐step cluster analysis. Each homogeneous region was then discriminated by an equation developed on the basis of its hydrogeological features, which was then used to determine which of three sets of regional LPFDC models would be appropriate for a particular ungauged site. Each of the three sets of regional LPFDC models were developed using both conventional multivariate statistical regression and fuzzy regression. Thirty‐four stream‐gauged watersheds located in southern Taiwan provide the data set. The study results reveal that the regional LPFDC models developed in this study could be applied reasonably at ungauged sites. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

18.
Extreme high precipitation amounts are among environmental events with the most disastrous consequences for human society. This paper deals with the identification of ‘homogeneous regions’ according to statistical characteristics of precipitation extremes in the Czech Republic, i.e. the basic and most important step toward the regional frequency analysis. Precipitation totals measured at 78 stations over 1961–2000 are used as an input dataset. Preliminary candidate regions are formed by the cluster analysis of site characteristics, using the average-linkage clustering and Ward’s method. Several statistical tests for regional homogeneity are utilized, based on the 10-yr event and the variation of L-moment statistics. In compliance with results of the tests, the area of the Czech Republic has been divided into four homogeneous regions. The findings are supported by simulation experiments proposed to evaluate stability of the test results. Since the regions formed reflect also climatological differences in precipitation regimes and synoptic patterns causing high precipitation amounts, their future application may not be limited to the frequency analysis of extremes.  相似文献   

19.
Rainfall extremes often result in the occurrence of flood events with associated loss of life and infrastructure in Malawi. However, an understanding of the frequency of occurrence of such extreme events either for design or disaster planning purposes is often limited by data availability at the desired temporal and spatial scales. Regionalisation, which involves “trading time for space” by pooling together observations for stations with similar behavior, is an alternative approach for more accurate determination of extreme events even at ungauged areas or sites with short records. In this study, regional frequency analysis of rainfall extremes in Southern Malawi, large parts of which are flood prone, was undertaken. Observed 1-, 3-, 5- and 7-day annual maximum rainfall series for the period 1978–2007 at 23 selected rainfall stations in Southern Malawi were analysed. Cluster analysis using scaled at-site characteristics was used to determine homogeneous rainfall regions. L-moments were applied to derive regional index rainfall quantiles. The procedure also validated the three rainfall regions identified through homogeneity and heterogeneity tests based on Monte Carlo simulations with regional average L-moment ratios fitted to the Kappa distribution. Based on assessments of the accuracy of the derived index rainfall quantiles, it was concluded that the performance of this regional approach was satisfactory when validated for sites not included in the sample data. The study provides an estimate of the regional characteristics of rainfall extremes that can be useful in among others flood mitigation and engineering design.  相似文献   

20.
A derived distribution approach is developed for flood prediction in poorly gauged basins. This couples information on the expected storm scaling, condensed into Depth Duration Frequency curves, with soil abstractions modeled using Soil Conservation Service Curve Number method and hydrological response through Nash’s Instantaneous Unit Hydrograph. A simplified framework is given to evaluate critical duration for flood design. Antecedent moisture condition distribution is included. The method is tested on 16 poorly gauged Mediterranean watersheds in Tyrrhenian Liguria, North Western Italy, belonging to a homogeneous hydrological regions. The derived flood distribution is compared to the regional one, currently adopted for flood design. The evaluation of Curve Number is critical for peak flood evaluation and needs to be carefully carried out. This can be done including local Annual Flood Series data in the estimation of the derived distribution, so gathering the greatest available information. However, Curve Number influence decreases for the highest return periods. When considerable return periods are required for flood design and few years of data are available, the derived distribution provides more accurate estimates than the approach based on single site distribution fitting. A strategy based on data availability for application of the approach is then given. The proposed methodology contributes to the ongoing discussion concerning PUB (Prediction in Ungauged Basins) decade of the IAHS association and can be used by researchers and practitioners for those sites where no flood data, or only a few, are available, provided precipitation data and land use information are at hand.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号