共查询到20条相似文献，搜索用时 15 毫秒
1.
Response spectrum analysis for non-classically damped linear system with multiple-support excitations 总被引：1，自引：0，他引：1
A new response spectrum method, which is named complex multiple-support response spectrum (CMSRS) method in this article,
is developed for seismic analysis of non-classically damped linear system subjected to spatially varying multiple-supported
ground motion. The CMSRS method is based on fundamental principles of random vibration theory and properly accounts for the
effect of correlation between the support motions as well as between the modal displacement and velocity responses of structure,
and provides an reasonable and acceptable estimate of the peak response in term of peak seismic ground motions and response
spectra at the support points and the coherency function. Meanwhile, three new cross-correlation coefficients or cross covariance
especially for the non-classically damped linear structures with multiple-supports excitations are derived under the same
assumptions of the MSRS method of classically damped system. The CMSRS method is examined and compared to the results of time
history analyses in two numerical examples of non-classically damped structures in consideration of the coherences of spatially
variable ground motion. The results show that for non-classically damped structure, the cross terms representing the cross
covariance between the pseudo-static and dynamic component are also quite small just as same as classically damped system.
In addition, it is found that the usual way of neglecting all the off-diagonal elements in transformed damping matrix in modal
coordinates in order to make the concerned non-classically damped structure to become remaining proportional damping property
will bring some errors in the case of subjected to spatially excited inhomogeneous ground motion. 相似文献
2.
A simple modal damping identification model developed by the present authors for classically damped linear building frames is extended here to the non-classically damped case. The modal damping values are obtained with the aid of the frequency domain modulus of the roof-to-basement transfer function and the resonant frequencies of the structure (peaks of the transfer function) as well as the modal participation factors and mode shapes of the undamped structure. The assumption is made that the modulus of the transfer function of the non-classically damped structure matches the one of the classically damped structure in a discrete manner, i.e., at the resonant frequencies of that function modulus. This proposed approximate identification method is applied to a number of plane building frames with and without pronounced non-classical damping under different with respect to their frequency content earthquakes and its limitations and range of applicability are assessed with respect to the accuracy of both the identified damping ratios and that of the seismic structural response obtained by classical mode superposition and use of those identified modal damping ratios. 相似文献
3.
The evaluation of the dynamic response of non-classically damped linear structures requires the solution of an eigenproblem with complex eigenvalues and modal shapes. Since in practice only a small number of complex modes are needed, the complex eigenvalue problem is solved in the modal subspace in which the generalized damping matrix is not uncoupled by classical real modes. It follows that the evaluation of the structural response requires in both cases the determination of complex modes by numerical techniques, which are not as robust as techniques currently used for the solution of the real eigenvalue problem, and the use of complex algebra. In the present paper an unconditionally stable step-by-step procedure is presented for the response of non-classically damped structures in the modal subspace without using complex quantities. The method is based on the evaluation of the fundamental operator in approximated form of the numerical procedure. In addition, the method can be easily modified to incorporate the modal superposition pseudo-static correction terms. 相似文献
4.
The response-spectrum mode superposition method is widely used for seismic response analyses of linear systems. In using this method, the complete quadratic combination （CQC） is adopted for classically damped linear systems and the complex complete quadratic combination （CCQC） formula is adopted for non-classically damped linear systems. However, in both cases, the calculation of seismic response analyses is very time consuming. In this paper, the variation of the modal correlation coefficients of displacement, velocity and displacement-velocity with frequency and damping ratios of two modes of interest are studied, Moreover, the calculation errors generated by using CQC and square-root-of-the-sum-of-thesquares （SRSS） methods （or CCQC and CSRSS methods） for different damping combinations are compared. In these analyses, some boundary lines for classically and non-classically damped systems are plotted to distinguish the allowed minimum frequency ratio at given geometric mean of the damping ratios of both modes if their relativity is neglected. Furthermore, the simplified method, which is a special mode quadratic combination method considering only relativity of adjacent modes in CQC method and named simplified CQC or partial quadratic combination （PQC） method for classically damped linear system, is proposed to improve computational efficiency, and the criterion for determination of how many correlated modes should be adopted is proposed. Similarly, the simplified CCQC or complex partial quadratic combination （CPQC） method for the non-classically damped linear system and the corresponding criterion are also deduced. Finally, a numerical example is given to illustrate the applicability, computational accuracy and efficiency of the PQC and CPQC methods. 相似文献
5.
A critical, textbook-like review of the generalized modal superposition method of evaluating the dynamic response of nonclassically damped linear systems is presented, which it is hoped will increase the attractiveness of the method to structural engineers and its application in structural engineering practice and research. Special attention is given to identifying the physical significance of the various elements of the solution and to simplifying its implementation. It is shown that the displacements of a non-classically damped n-degree-of-freedom system may be expressed as a linear combination of the displacements and velocities of n similarly excited single-degree-of-freedom systems, and that once the natural frequencies of vibration of the system have been determined, its response to an arbitrary excitation may be computed with only minimal computational effort beyond that required for the analysis of a classically damped system of the same size. The concepts involved are illustrated by a series of examples, and comprehensive numerical data for a three-degree-of-freedom system are presented which elucidate the effects of several important parameters. The exact solutions for the system are also compared over a wide range of conditions with those computed approximately considering the system to be classically damped, and the interrelationship of two sets of solutions is discussed. 相似文献
6.
In stochastic analysis the knowledge of cross-correlation coefficients is required in order to combine the response of the modal Single-Degree-Of-Freedom (SDOF) oscillators for obtaining the nodal response. Moreover these coefficients play a fundamental role in the seismic analysis of structures when the response spectrum method is used. In fact they are used in some modal combination rules in order to obtain the maximum response quantities starting from the modal maxima. Herein a method for the evaluation of the cross-correlation coefficients for non-classically damped systems is presented. It is defined in the time domain instead of the frequency domain as usually encountered in the literature. Although non-classically damped structures possess complex eigenproperties, the great advantage in using this approach lies in the fact that the evaluation of these coefficients does not require complex quantities. Moreover a further particularization of the presented method allows a simple application of the spectrum analysis requiring only one response spectrum for an assigned damping ratio. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
7.
It is often infeasible to carry out coupled analyses of multiply‐supported secondary systems for earthquake excitations. ‘Approximate’ decoupled analyses are then resorted to, unless the response errors due to those are significantly high. This study proposes a decoupling criterion to identify such cases where these errors are likely to be larger than an acceptable level. The proposed criterion is based on the errors in the primary system response due to decoupling and has been obtained by assuming (i) the input excitation to be an ideal white noise process, (ii) cross‐modal correlation to be negligible, and (iii) the combined system to be classically damped. It uses the modal properties of the undamped combined system, and therefore, a perturbation approach has been formulated to determine the combined system properties in case of light to moderately heavy secondary systems. A numerical study has been carried out to illustrate the accuracy achieved with the proposed perturbation formulation. The proposed decoupling criterion has been validated with the help of two example primary‐secondary systems and four example excitation processes. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
8.
A response spectrum method which combines the analytical advantage of the mode acceleration formulation and the practical advantage of the mode displacement formulation is developed for seismic response calculation of non-classically damped structures. It reduces the error associated with the truncation of the high frequency modes without explicitly using them in the analysis. The method is especially effective for calculating the response of stiff structural systems and also for calculating the response quantities which are strongly affected by high frequency modes. Even with flexible structures, it is shown to provide more accurate response results than the results obtained with the mode displacement approach. 相似文献
9.
G. B. Warburton 《地震工程与结构动力学》1979,7(4):327-334
As an example of the extension of the Rayleigh-Ritz method to response calculations, analysis is outlined for a damped rectangular plate. For harmonic excitation amplitudes of displacement and bending moment are compared with values from a modal solution from the plate equation. In general, the Rayleigh-Ritz method predicts displacements of acceptable accuracy, but for a given number of terms accuracy is less for response calculations than for the determination of comparable eigenvalues. Bending moments may converge slowly to the true values, as the number of terms in the assumed series is increased. 相似文献
10.
The step-by-step modal time history integration methods are developed for dynamic analysis of non-classically damped linear structures subjected to earthquake-induced ground motions. Both the mode displacement and mode acceleration-based algorithms are presented for the calculation of member and acceleration responses. The complex-valued eigenvectors are used to effect the modal decoupling of the equations of motion. However, the recursive step-by-step algorithms are still in terms of real quantities. The numerical results for the acceleration response and floor response spectra, obtained with these approaches, are presented. The mode acceleration approach is observed to be decidedly better than the mode displacement approach in as much as it alleviates the so-called missing mass effect, caused by the truncation of modes, very effectively. The utilization of the mode acceleration-based algorithms is, thus, recommended in all dynamic analyses for earthquake-induced ground motions. 相似文献
11.
Coupling adjacent buildings using discrete viscoelastic dampers for control of response to low and moderate seismic events is investigated in this paper. The complex modal superposition method is first used to determine dynamic characteristics, mainly modal damping ratio and modal frequency, of damper-linked linear adjacent buildings for practical use. Random seismic response of linear adjacent buildings linked by dampers is then determined by a combination of the complex modal superposition method and the pseudo-excitation method. This combined method can effectively and accurately determine random seismic response of non-classically damped systems in the frequency domain. Parametric studies are finally performed to identify optimal parameters of viscoelastic dampers for achieving the maximum modal damping ratio or the maximum response reduction of adjacent buildings. It is demonstrated that using discrete viscoelastic dampers of proper parameters to link adjacent buildings can reduce random seismic responses significantly. Copyright © 1999 John Wiley & Sons Ltd. 相似文献
12.
A method is presented to obtain the exact complex-valued eigenproperties of a classically damped structure and equipment system. The non-classically damped character of the combined system as well as the effect of dynamic interaction between primary structure and equipment are properly included in the calculation of these eigenproperties. It is necessary only to know the classical modal properties of the structure and, of course, the equipment characteristics. The eigenvalues are obtained as the solution of a non-linear equation which can be easily solved by the Newton–Raphson algorithm. Once the eigenvalues are known, the corresponding eigenvectors are obtained from simple closed-form expressions. The method can be used equally effectively with light as well as heavy equipment. Numerical results demonstrating the effectiveness of the method are presented. A procedure which utilizes the complex-valued eigenproperties is developed for calculating the floor response spectra directly from the ground spectra. Numerical results of floor response spectra obtained from this procedure are presented. The floor spectra calculated by this approach include the structure–equipment interaction effect. 相似文献
13.
A new response-spectrum mode superposition method, entirely in real value form, is developed to analyze the maximum structural response under earthquake ground motion for generally damped linear systems with repeated eigenvalues and defective eigenvectors. This algorithm has clear physical concepts and is similar to the complex complete quadratic combination (CCQC) method previously established. Since it can consider the effect of repeated eigenvalues, it is called the CCQC-R method, in which the correlation coefficients of high-order modal responses are enclosed in addition to the correlation coefficients in the normal CCQC method. As a result, the formulas for calculating the correlation coefficients of high-order modal responses are deduced in this study, including displacement, velocity and velocity-displacement correlation coefficients. Furthermore, the relationship between high-order displacement and velocity covariance is derived to make the CCQC-R algorithm only relevant to the high-order displacement response spectrum. Finally, a practical step-by-step integration procedure for calculating high-order displacement response spectrum is obtained by changing the earthquake ground motion input, which is evaluated by comparing it to the theory solution under the sine-wave input. The method derived here is suitable for generally linear systems with classical or non-classical damping. 相似文献
14.
针对既有方法在分析TMD结构基于双过滤白噪声激励下结构响应的解表达式复杂而导致计算效率低的问题,提出了一种简明封闭解法。首先,利用双过滤白噪声谱的滤波方程与TMD结构的地震动方程联立,可将TMD结构基于复杂的双过滤白噪声激励准确的表示为易于求解的运动方程;其次,基于复模态法获得TMD耗能结构位移、层间位移的系列响应的复特征值及复模态参与系数;然后基于随机振动理论获得了TMD结构随机地震动系列响应（相对于地面绝对位移和结构层间位移）的功率谱统一形式的二次正交解,进而获得了TMD结构系列随机响应的0-2阶谱矩和方差的简明封闭解。最后研究了基于首超破坏准、Markov过程假设及串联失效模式的TMD结构的体系动力可靠度。通过一算例分析,表明了本文方法的正确性和高效性。因此,本文方法可用于各类线性结构基于复杂的随机地震动响应的分析及其动力可靠度计算。 相似文献
15.
The stationary response of multi-degree-of-freedom non-classically damped linear systems subjected to stationary input excitation is studied. A modal decomposition procedure based on the complex eigenvectors and eigenvalues of the system is used to derive general expressions for the spectral moments of response. These expressions are in terms of cross-modal spectral moments and explicitly account for the correlation between modal responses; thus, they are applicable to structures characterized with significant non-classical damping as well as structures with closely spaced frequencies. Closed form solutions are presented for the important case of response to white-noise input. Various quantities of response of general engineering interest can be obtained in terms of these spectral moments. These include mean zero-crossing rate and mean, variance and distribution of peak response over a specified duration. Examples point out several instances where non-classical damping effects become significant and illustrate the marked improvement of the results of this study over conventional analysis based on classical damping approximations. 相似文献
16.
A time-integration procedure for dynamic analysis of non-classically damped systems, in which high-frequency modes play a significant role, is suggested. This procedure is an extension of Clough and Mojtahedi's1 method. Clough and Mojtahedi suggested integration of the transformed coupled equations of motion where the transformation is done using a truncated set of undamped mode-shapes. The proposed extension consists in adding the response of all the higher modes through a quasistatic analysis. Approximations involved in using such a procedure are examined. Numerical results presented indicate that the proposed extension leads to a significant improvement over Clough and Mojtahedi's method. 相似文献
17.
A simplified multisupport response spectrum method is presented.The structural response is a sum of two components of a structure with a first natural period less than 2 s.The first component is the pseudostatic response caused by the inconsistent motions of the structural supports,and the second is the structural dynamic response to ground motion accelerations.This method is formally consistent with the classical response spectrum method,and the effects of multisupport excitation are considered for any modal response spectrum or modal superposition.If the seismic inputs at each support are the same,the support displacements caused by the pseudostatic response become rigid body displacements.The response spectrum in the case of multisupport excitations then reduces to that for uniform excitations.In other words,this multisupport response spectrum method is a modification and extension of the existing response spectrum method under uniform excitation.Moreover,most of the coherency coefficients in this formulation are simplified by approximating the ground motion excitation as white noise.The results indicate that this simplification can reduce the calculation time while maintaining accuracy.Furthermore,the internal forces obtained by the multisupport response spectrum method are compared with those produced by the traditional response spectrum method in two case studies of existing long-span structures.Because the effects of inconsistent support displacements are not considered in the traditional response spectrum method,the values of internal forces near the supports are underestimated.These regions are important potential failure points and deserve special attention in the seismic design of reticulated structures. 相似文献
18.
关于结构振型参与系数和振型贡献的分析 总被引：1，自引：0，他引：1
采用振型分解反应谱法求解多自由度弹性体系的地震反应时,为了在满足所需计算精度的前提下减少工作量,需要对振型数量进行合理的选择,而振型数的确定主要取决于结构各阶振型对总体反应的贡献。通过数学推导,对振型贡献及振型数量的选择问题进行了研究。首先,讨论了振型参与系数的性质,在此基础上给出了能够反映结构振型贡献参数的数学表达式,对这些参数的力学含义进行了解释,并给出了相关证明;其次,对有效质量法、振型位移控制法等基于不同振型贡献标准的确定振型数的方法进行了分析比较,指出了其合理性和不足。本文研究对进一步理解结构振型贡献和振型数的选择问题具有一定的理论意义。 相似文献
19.
Mode superposition is a widely used method for solving the dynamic equilibrium equation in structural dynamic analysis. However, the accuracy of this method may be reduced when the dynamic equilibrium equations are set up using displacement excitation. A new method for developing solutions for dynamic equilibrium equations based on displacement excitation is introduced. The dynamic equilibrium equation is decomposed into two parts, namely displacement excitation and velocity excitation, and precise integration and mode superposition methods are combined to solve the equation. Ritz vectors are then used to calculate the static response of the truncated modes of the structure, and a method for determining the number of participating modes is obtained. Using multi-degree-of-freedom systems as two computational examples, the differences in the structural responses obtained from the displacement excitation and acceleration excitation are compared and analyzed. It is shown that the new solution method generates consistent accuracy between the displacement excitation and acceleration excitation. 相似文献
20.
R. W. Traill-Nash 《地震工程与结构动力学》1981,9(2):153-169
When damping in a system is both significantly high and its distribution is non-classical the solution of dynamical problems by conventional modal analysis is complicated by the presence of coupling between the normal co-ordinates. Further, the convergence of a solution may be erratic with successive modal additions, leading to the need to include a larger number of modes than would otherwise be expected. In this paper methods of modal analysis in structural dynamics are discussed and their derivations briefly given. These include the conventional mode displacement method and the force summation method, employing normal modes, and the analogous procedures with damped modes. In the latter, dynamic response equations are not coupled. Dynamic loading solutions by the four approaches, each taking account of the non-classical damping distribution, are demonstrated with a simple model representing a structure on a compliant foundation. The results strongly suggest that the use of damped modes with force summation could be the most effective procedure when damping is non-classical. 相似文献