共查询到20条相似文献，搜索用时 15 毫秒
1.
Parametric roll of a containership in head sea condition has been studied in the paper. A time domain routine for GZ righting arm calculation based on exact underwater hull geometry has been implemented into a two-degree-of-freedom procedure for roll response calculation. The speed variation due to e.g. added resistance has been accounted for in the model by the surge velocity. The ship roll motion due to a regular wave critical for parametric roll occurrence has been simulated, as well as the ship roll response in a severe stochastic sea. The present method has been compared with other existing methods for parametric roll prediction. 相似文献
2.
The purpose of this paper is to analyze the nonlinear ship roll motion equation and the main parameters that induce ship capsizing in beam seas, estimate the survival probability of a ferry in random seas and to find out a risk assessment method for the ship’s intact stability. A single degree of freedom (1-DOF) dynamic system of ship rolling in beam seas is investigated and the nonlinear differential equation is solved in the time domain by the fourth order Runge-Kutta algorithm. The survival probability of a ferry in beam seas is investigated using the theory of “safe basin”. The survival probability is calculated by estimating erosion of “safe basin” during ship rolling motion by Monte Carlo simulations. From the results it can be concluded that the survival probability of a ship in beam sea condition can be predicted by combining Monte Carlo simulations and the theory of “safe basin”. 相似文献
3.
The paper studies the parametric stochastic roll motion in the random waves. The differential equation of the ship parametric roll under random wave is established with considering the nonlinear damping and ship speed. Random sea surface is treated as a narrow-band stochastic process, and the stochastic parametric excitation is studied based on the effective wave theory. The nonlinear restored arm function obtained from the numerical simulation is expressed as the approximate analytic function. By using the stochastic averaging method, the differential equation of motion is transformed into Ito's stochastic differential equation. The steady-state probability density function of roll motion is obtained, and the results are validated with the numerical simulation and model test. 相似文献
4.
This paper reviews the development of ship anti-roll tanks from the 1880s to the present day including their modelling and control strategies. Mention is also made of other ship roll stabilization systems and the application of the technology to stabilization of other structures. The potential for the use of roll stabilization tanks on modern, high speed multi-hull craft which also have a low speed operational requirement is also discussed. 相似文献
5.
The best way of reducing roll motion is by increasing roll damping. Bilge keels are the most common devices for increasing roll damping. If more control is required, anti-roll tanks and fins are used. Tanks have the advantage of being able to function when the ship is not underway. Our objective is to develop design procedures for passive tanks for roll reduction in rough seas. This paper focuses on the design of passive U-tube tanks. The tank-liquid equation of motion is integrated simultaneously with the six-degree-of-freedom (6DOF) equations of the ship motion. The coupled set of equations is solved by using the Large Amplitude Motion Program ‘LAMP’, which is a three-dimensional time-domain simulation of the motion of ships in waves. The unstabilized and stabilized roll motions of a S60-70 ship with forward speed and beam waves have been analyzed. For high-amplitude waves, the unstabilized roll angle exhibits typical nonlinear phenomena: a shift in the resonance frequency, multi-valued responses, and jumps. The performance of a S60-70 ship with a passive tank is investigated in various sea states with different encounter wave directions. It is found that passive anti-roll tanks tuned in the linear or nonlinear ranges are very effective in reducing the roll motion in the nonlinear range. The effect of the tank damping, frequency, and mass on the tank performance is studied. Also, it is found that passive anti-roll tanks are very effective in reducing the roll motion for ships having a pitch frequency that is nearly twice the roll frequency in sea states 5 and 6. 相似文献
6.
This study proposes a ship weather-routing algorithm based on the composite influence of multi-dynamic elements for determining the optimized ship routes. The three-dimensional modified isochrone (3DMI) method utilizing the recursive forward technique and floating grid system for the ship tracks is adopted. The great circle sailing (GCR) is considered as the reference route in the earth coordinate system. Illustrative optimized ship routes on the North Pacific Ocean have been determined and presented based on the realistic constraints, such as the presence of land boundaries, non-navigable sea, seaway influences, roll response as well as ship speed loss. The proposed calculation method is effective for optimizing results by adjusting the weighting factors in the objective functions. The merits of the proposed method can be summarized as: (1) the navigability of the route can be analyzed dynamically to acquire the optimal route; (2) adopting multi-dynamic elements as weighting factors has the benefits in energy efficiency, time-saving and minimum voyage distance; and (3) an ability to enhance speed performance and to incorporate safety concern in a dynamic environment. 相似文献
7.
In this paper, we present a mathematical model including seakeeping and maneuvering characteristics to analyze the roll reduction for a ship traveling with the stabilizer fin in random waves. The self-tuning PID controller based on the neural network theory is applied to adjust optimal stabilizer fin angles to reduce the ship roll motion in waves. Two multilayer neural networks, including the system identification neural network (NN1) and the parameter self-tuning neural network (NN2), are adopted in the study. The present control technique can save the time for searching the optimal PID gains in any sea states. The simulation results show that the present developed self-tuning PID control scheme based on the neural network theory is indeed quite practical and sufficient for the ship roll reduction in the realistic sea. 相似文献
8.
In this paper our previously developed advanced system identification technique [1] has been applied to extract the frequency dependent roll damping from a series of model tests run in irregular (random) waves. It is shown that this methodology accurately models the roll damping which can then be used to produce accurate predictions of the ships roll motion. These roll motion predictions are not only more accurate than the potential flow predictions but more accurate than potential flow models corrected using either empirical prediction methods [2] and even those corrected using roll damping obtained from free decay sallying experiments. This methodology has the potential to significantly improve roll motion prediction during full scale at sea trails of vessels in order to dramatically improve safety of critical operations such as helicopter landing or ship to ship cargo transfer. 相似文献
9.
利用基于三维势流理论的Wasim软件,系统研究了在不同海况下大型豪华邮轮的耐波性能及作用在救生艇上的砰击载荷。首先计算豪华邮轮在规则波和不规则波中的运动响应,分析航速、浪向和海况对豪华邮轮运动响应的影响规律,然后计算救生艇在不同海况下砰击载荷的变化规律,根据变化规律评估救生艇在实际航行中的安全性。结果表明：豪华邮轮运动响应幅值随着航速和海况的增大整体呈增大趋势,规则波中横摇运动响应幅值在浪向90°时最大;当豪华邮轮处于4级和6级海况时救生艇不发生砰击;当豪华邮轮处于8级海况且航速大于10.29 m/s时救生艇发生砰击,为保证救生艇的安全,邮轮应避免在浪向120°和浪向150°下航行,此时建议邮轮以低于12.35 m/s的航速迎浪180°航行。 相似文献
10.
Hyeon Kyu Yoon Nam Sun Son Gyeong Joong Lee 《Oceanic Engineering, IEEE Journal of》2007,32(4):798-806
When a fast container ship or a naval vessel turns, accompanying roll motions occur. This roll effect must be considered in the horizontal equations of the motion of the ship to predict the maneuverability of the ship properly. In this paper, a new method for determining a model structure of the hydrodynamic roll moment acting on a ship and for estimating the hydrodynamic coefficients is proposed. The method utilizes a system identification technique with the data from sea trial tests or from free running model (FRM) tests. To obtain motion data that is applied to the proposed algorithm, an FRM of a large container ship was developed. Using this model ship, standard maneuvering tests were carried out on a small body of water out of doors. A hydrodynamic roll moment model was constructed utilizing the data from turning circle tests and a 20-20 zig-zag test. This was then confirmed through a 10-10 zig-zag test. It was concluded that a model structure of the hydrodynamic roll moment model could be established without difficulty through a system identification method and FRM tests. 相似文献
11.
A four‐antenna GPS attitude determination system was used to estimate roll, pitch, and heading parameters of a 52‐meter surveying vessel in an operational marine environment. The least squares algorithm for platform attitude estimation using multiple baseline vector observables is presented. An efficient on‐the‐fly carrier phase ambiguity searching method is derived, which utilizes the Cholesky decomposition method and the known baseline constraints between the GPS antennas to construct the potential ambiguity sets on the sphere. The accuracy of the estimated attitude parameters from the GPS multi‐antenna system was assessed with an independent inertial navigation system (INS). Results from sea trials show that the proposed GPS multi‐antenna system and processing algorithms delivered a satisfactory performance under various ship maneuvers. The accuracy of GPS estimated ship attitude parameters is better than 0.06 degrees at an output rate of 10 Hz. Such a performance demonstrates a new alternative means to provide accurate, reliable, and cost‐effective ship attitude information for hydrographic applications. 相似文献
12.
An assessment is made of the maximum wave induced bending moment expected to occur during the operational lifetime of a fast monohull, based on long term distribution calculations of the non-linear vertical bending moment at mid-ship. The ship is assumed to operate in the Northern North Sea, with an operational life of 25 years. A succession of short-term stationary ship responses represented by Rayleigh distributions of peaks results in the long-term distribution of the structural loads. Non-linear pseudo transfer functions are used in the procedure to calculate the variances of the short-term responses. The amplitudes of these transfer functions are calculated by a non-linear time domain seakeeping program. The results are compared with rules minimum required values and also with results from simpler calculation procedures such as adopting design sea states. 相似文献
13.
This study introduces a method of calculating a capsizing rate of a ship. The phenomenon ‘capsizing’ is described as a jump of local equilibrium point from that near the upright position of a ship to what describes the upside-down attitude of the capsized ship; the rate of occurrence of such jumps was calculated. The potential function corresponding to the roll restoring moment have two potential wells located at the roll displacement angle 0 and 180°, respectively. A nonlinear Fokker–Planck equation for the joint probability density function of roll angle and velocity was solved. The excitation to the ship was assumed to be a combination of a regular harmonic wave and a white noise process. 相似文献
14.
The fatigue assessment plays an increasing role for the offshore structural safety. Many fatigue assessment methods have been developed for this purpose. Among those methods, the time domain method is regarded as the most accurate method but less adopted in practice due to time consuming. In order to improve the efficiency of the time domain method, an innovative block partition and equivalence method of the wave scatter diagram is developed for offshore structural fatigue assessment. After the wave scatter diagram is partitioned into several blocks, the newly developed method, involves determination of the equivalent wave height, wave period and occurrence probability of the representative sea states based on modified energy equivalent principle. The equivalent wave period of the representative sea state is calculated via the spectral moment formula in which the equivalent spectral moments of zero and second order are obtained based on the weighted averaging principle. Combining with the determined wave period, the equivalent significant wave height can be determined by reversing the wave spectrum integral formula, where the equivalent wave energy of a divided block of the wave scatter diagram is modified by introducing a factor to compensate the effect of low- and high-amplitude cycles fatigue damage. The equivalent occurrence probability is equal to the summation of the original sea states’ occurrence probability within the divided block. The developed method has the advantage of preserving the stochastic characteristics of the short term sea states within the divided block during determining the representative sea state. At the same time the newly developed method has no limitation on block partition and can be applied on different offshore structure. Two structural models, a fixed mono-pile platform and a floating semi-submersible platform, are demonstrated in the numerical examples. Results indicate that the newly developed method is robust, computationally affordable, and accurate within engineering expectations. 相似文献
15.
The International Maritime Organization has developed the second-generation intact stability criteria. Thus, damage stability criteria can be established in the future. In order to identity the capsizing probability of damaged ship under dead ship condition, this paper investigates two methods that can be used to research the capsizing probability in time domain, which mainly focus on the nonlinear righting lever GZ curve solution. One method subjects the influence of damaged tanks on the hull shape down to the wind and wave, and the other method is consistent with the real-time calculation of the GZ curve. On the basis of one degree of freedom rolling equation, the solution is Monte Carlo method, and a damaged fishery bureau vessel is taken as a sample ship. In addition, the results of the time-domain capsizing probability under different loading conditions are compared and analyzed. The relation of GM and heeling angle with the capsizing probability is investigated, and its possible reason is analyzed. On the basis of combining the time-domain flooding process with the capsizing probability calculation, this research aims to lay the foundation for the study of capsizing probability in time domain under dead ship condition, as well as provide technical support for capsizing mechanism of dead ship stability and damage stability criteria establishment in waves. 相似文献
16.
近年来,海战场成为现代战争的主要作战区域之一,舰船目标逐渐成为海上重点监测对象,能否快速准确地识别海战场舰船目标的战术意图,给指挥员的决策提供必要的支持,这关系到一场海上战役的成败.随着合成孔径雷达(synthetic aperture radar,SAR)成像技术的不断发展,大量SAR图像可用于舰船目标检测与识别.利用SAR图像进行舰船目标检测与识别,已经成为重要的海洋应用之一.针对传统SAR图像舰船检测方法准确率较低的问题,本文在YOLOv3的基础上,结合感受野(receptive field block,RFB)模块,提出一种增强型的SAR舰船检测方法.该方法在最近公开的SAR图像舰船检测数据集上平均准确率值达到了91.50％,与原YOLOv3相比提高了0.92％.实验结果充分表明本文提出的算法在SAR舰船的检测中具有较好的检测效果. 相似文献
17.
Robust prediction of extreme motions during wind farm support vessel(WFSV)operation is an important safety concern that requires further extensive research as offshore wind energy industry sector widens.In particular,it is important to study the safety of operation in random sea conditions during WFSV docking against the wind tower,while workers are able to get on the tower.Docking is performed by thrusting vessel fender against wind tower(an alternative docking way by hinging is not studied here).In this paper,the finite element software AQWA has been used to analyze vessel response due to hydrodynamic wave loads,acting on a specific maintenance ship under actual sea conditions.Excessive roll may occur during certain sea conditions,especially in the beam sea,posing a risk to the crew transfer operation.The Bohai Sea is the area of diverse industrial activities such as offshore oil production,wave and wind power generation,etc.This paper advocates a novel method for estimating extreme roll statistics,based on Monte Carlo simulations(or measurements).The ACER(averaged conditional exceedance rate)method and its modification are presented in brief detail in Appendix.The proposed methodology provides an accurate extreme value prediction,utilizing available data efficiently.In this study the estimated return level values,obtained by ACER method,are compared with the corresponding return level values obtained by Gumbel method.Based on the overall performance of the proposed method,it is concluded that the ACER method can provide more robust and accurate prediction of the extreme vessel roll.The described approach may be well used at the vessel design stage,while defining optimal boat parameters would minimize potential roll. 相似文献
18.
A new analysis of nonlinear rolling carried out by the multiscale perturbation method is herewith presented. The behaviour of a ship in a regular beam sea is considered and approximate analytical solutions in three nonlinear resonance regions are obtained. These concern the transient and the steady state roll oscillations. The latter fits in well with a previous one obtained through the averaging method and with the results of the numerical simulation.The obtained results appear to be particularly convenient due to their major mathematical simplicity. Moreover, they allow a simple estimation of the maximum roll amplitudes predictable for a given excitation intensity. 相似文献
19.
This paper describes a complete set of methods for arranging acoustic images of the sea floor by projecting and interpolating data gathered with a novel front-scan sonar system, developed in the context of the EC-COSMOS project. Traditional sonar imaging systems for sea-floor analysis generate acoustic images during the motion of a ship; on the contrary, the front-scan sonar system not only provides information unreachable by traditional devices (blind region), but also does not need the ship motion to compose a whole image of the sea floor. Two different projection methods have been devised: a simpler analytical solution and a more precise ray-tracing approach. The development of an analytical solution is possible under the classical assumptions about a flat sea floor and a constant sound velocity profile; when these hypotheses are not realistic or a more precise image is required, a numerical solution obtained by a ray-tracing approach can be applied, which is based on some ad hoc solutions worked out for the front-scan sonar system. To move from the projection results to an image defined over a dense matrix of pixels, an interpolation stage is needed. To this end, an algorithm based on the generation of virtual-beam signals (only where necessary) has been tested and compared with more-traditional techniques. The potentials of the proposed projection and interpolation methods have been evaluated and some comparisons have been made, using real data gathered with the COSMOS sonar prototype during trials at sea. 相似文献
20.
Capsizing of ships constitutes a primary group of casualties that leads to loss of life and money. Unfortunately, its mechanism has yet to be fully resolved due to underlying complex dynamics and parameters. Upon studying the causes in more detail, designing safer ships against capsizing may become a reality. In the present study, a relatively different approach called “reserve of stability” or “stability margins” which utilizes both statical and nonlinear dynamical aspects of stability is employed to analyze ship hydrodynamics. For this purpose a nonlinear roll model in beam waves has been implemented. In order to apply the theory, a capsized vessel is chosen to be analyzed in terms of stability. The necessary data about the vessel at the time of capsizing were collected from the published work found in the naval architecture literature. Suggestions are made based on the results of the analysis to improve ship stability qualities in a seaway. 相似文献