共查询到19条相似文献,搜索用时 138 毫秒
1.
协议天球坐标系GCRS是一个准惯性坐标系,在研究卫星运动状态一般都是在这个坐标系下进行。国际地球参考系ITRS是我们常用的坐标系,一般性测量涉及的坐标都是这个坐标系。为了更方便地研究卫星问题,经常需要在这两个坐标系下进行转换。IAU的标准基本天文程序库SOFA给出基本天文运算的库函数,利用这些库函数,可以方便地实现这两个坐标系的转换。基于SOFA的这些特点,利用C++对GCRS与ITRS的坐标转换进行了研究。 相似文献
2.
在卫星导航等领域会经常遇到国际地球参考系(ITRS)与地心天球参考系(GCRS)之间的坐标转换问题,这两个坐标系间的转换需要经过岁差与章动的旋转计算,其中岁差与章动参数的计算模型高达上千项,程序编写十分繁琐,一般采用由国际天文协会IAU提供的标准基本天文程序库SOFA进行转换,但是该程序库只有For-tran语言版和C语言版,而没有现在流行的C#语言版。针对上述问题,本文研究并采用混合编程的方式,在C#版中跨语言调用SOFA中的C版代码,实现ITRS与GCRS的坐标转换。利用IGS站提供的ITRS下的GPS卫星精密星历进行ITRS与GCRS之间的坐标转换,表明程序计算的正确性与混合编程技术的可行性。 相似文献
3.
《测绘地理信息》2017,(5)
在不同领域经常涉及到国际地球参考系(international terrestrial reference system,ITRS)和地心天球参考系(geocentric celestial reference system,GCRS)这两种不同坐标系之间的相互转换,其中ITRS用来描述地面点或近地卫星在地球上的位置,而GCRS用来描述自然天体或人造天体在空间的位置与方向。目前,基础天文标准库(standards of fundamental astronomy,SOFA)基于天球中间原点(celestial intermediate origin,CIO),提供两种坐标转换方法——经典角度法和X、Y序列转换方法。基于这两种转换方法,利用国际GNSS服务(IGS)提供的精密星历SP3,在不同历元对不同转换方法的差异进行了验证。实验表明,在任意历元,X轴和Z轴的差异均小于0.08mm,而Y轴差异小于0.03mm。 相似文献
4.
5.
针对卫星精密定轨中常用的地固系与空固系坐标转换的程序实现问题,该文研究了IERS 2010规范对坐标系转换的定义和步骤,提出了基于C和FORTRAN混合编程技术的程序实现方法:将IAU2006提供的C版本的SOFA天文计算程序和IERS2010规范提供的FORTRAN版本的海潮改正程序制作成静态链接库,并对FORTRAN程序按照C语言的标准进行接口声明,最后使用C语言编写主程序调用静态库实现了坐标变换。实验结果表明,提出的混合编程技术具有实际应用价值和跨平台跨系统的优势,易于推广。 相似文献
6.
GPS卫星轨道数值积分与广播星历及IGS精密星历的比较 总被引:3,自引:0,他引:3
本文采用作者自编的SPPORB IT程序,对GPS卫星轨道的运动方程进行Adam s数值积分求解,同时利用广播星历计算卫星轨道坐标,然后将两者结果同IGS精密星历提供的卫星坐标进行比较,并探讨其轨道误差,计算结果显示广播星历与精密星历差值在2m左右,而数值积分与精密星历的差值在2 cm左右,进一步的分析表明前者误差较大是没有考虑卫星所受的太阳光压、日月引力等影响,而后者考虑了这些影响。鉴于IGS提供的是地固系坐标,而本文数值积分是在惯性系坐标系下进行的,因此本文还举例对惯性坐标系和地固系之间的坐标转换进行了描述。最后,通过实例说明SPPORB IT程序的稳定性以及Adam s数值积分方法的有效性。 相似文献
7.
《测绘与空间地理信息》2020,(8)
在日常测量过程中,经常碰到不同坐标系间坐标转换的问题,为消除不必要的麻烦,需要进行坐标系转换。目前,我国1954北京坐标系和1980西安坐标系空间点位坐标通过利用参数模型转换2000国家大地坐标系,目前各种测绘资料存在着两个坐标系的差异问题,为方便日常工作开展,必须进行坐标系的转换。本文通过两种方法探讨研究将数据坐标转换成2000国家大地坐标系。 相似文献
8.
地心天球参考系(GCRS)与国际地球参考系(ITRS)之间有两种坐标转换模型:基于春分点的岁差章动转换和基于CIO的无旋转原点转换。IERS 2003和2010规范针对这两种转换模型分别推荐了相应的转换参数。以DE421历表中太阳系10个天体为例,计算并分析了两种坐标转换模型之间、以及两个规范之间的差异对于坐标转换的影响。结果表明:对于同一个规范而言,两种坐标转换模型之间的差异对坐标转换的影响在5μas以内;对于同一种坐标转换模型而言,两个规范之间的差异对坐标转换的影响在0.5 mas以内。 相似文献
9.
GPS和GLONASS卫星定位系统分别采用WGS-84和PZ-90坐标系。为统一两种卫星定位成果,欧、美、俄于20世纪90年代各自求出两坐标系之间的转换参数。目前三种参数尚未统一,对GPS/GLONASS联合定位造成较大影响。本文针对国外介绍PZ-90和WGS-84坐标系相互转换时常用的转换模型及三种不同转换参数进行比较分析。分别选用地面GPS参考站坐标和GLONASS卫星轨道坐标,用三种坐标转换参数进行转换,对转换结果差异及其对单点定位和相对定位精度造成的影响进行全面分析比较,得出一些有益结论。 相似文献
10.
11.
12.
Relativity, or gravitational physics, has widely entered geodetic modelling and parameter determination. This concerns, first
of all, the fundamental reference systems used. The Barycentric Celestial Reference System (BCRS) has to be distinguished
carefully from the Geocentric Celestial Reference System (GCRS), which is the basic theoretical system for geodetic modelling
with a direct link to the International Terrestrial Reference System (ITRS), simply given by a rotation matrix. The relation
to the International Celestial Reference System (ICRS) is discussed, as well as various properties and relevance of these
systems. Then the representation of the gravitational field is discussed when relativity comes into play. Presently, the so-called
post-Newtonian approximation to GRT (general relativity theory) including relativistic effects to lowest order is sufficient
for practically all geodetic applications. At the present level of accuracy, space-geodetic techniques like VLBI (Very Long
Baseline Interferometry), GPS (Global Positioning System) and SLR/LLR (Satellite/Lunar Laser Ranging) have to be modelled
and analysed in the context of a post-Newtonian formalism. In fact, all reference and time frames involved, satellite and
planetary orbits, signal propagation and the various observables (frequencies, pulse travel times, phase and travel-time differences)
are treated within relativity. This paper reviews to what extent the space-geodetic techniques are affected by such a relativistic
treatment and where—vice versa—relativistic parameters can be determined by the analysis of geodetic measurements. At the
end, we give a brief outlook on how new or improved measurement techniques (e.g., optical clocks, Galileo) may further push
relativistic parameter determination and allow for refined geodetic measurements. 相似文献
13.
完整后牛顿近似下原时与坐标时的转换 总被引:2,自引:0,他引:2
IAU2000通过了新的时空参考系和时间尺度决议,建议时空坐标理论必须在完整的后牛顿近似下来考虑。基于IAU2000决议,文中研究了在完整后牛顿近似下相对论参考系的基本概念、太阳系质心天球参考系(BCRS)和地球质心天球参考系(GCRS)的定义及其转换公式;推导了原时与坐标时之间的理论关系和严格转换公式。得到的理论公式可为进一步确定或定义相对论框架下的其它时间尺度(例如地球时和太阳系动力学时)提供了严格的理论基础和依据。 相似文献
14.
地球自转参数(ERP)是实现地心天球坐标系(geocentric celestial reference system,GCRS)与国际地球坐标系(international terrestrial reference system,ITRS)相互转换的必要参数,是国际GNSS服务组织(IGS)和国际GNSS监测评估系统(iGMAS)分析中心的重要产品。本文针对最小二乘地球自转参数预测算法会造成数据饱和以及新旧数据在数据处理及预报中被同等对待等问题,将遗忘因子引入最小二乘预测算法,进而提高ERP预报精度。遗忘因子递推最小二乘算法能防止数据饱和,降低旧数据的影响,加强新数据的作用,降低在求解拟合参数时出现秩亏矩阵求逆的几率,提高预报精度。本文详细推导了遗忘因子递推最小二乘表达式,探究了最佳遗忘因子,并通过ERP试验将该方法和原最小二乘的试验结果及LS-AR模型的预报结果作对比,发现仅用遗忘因子最小二乘模型预测就可以达到与LS-AR组合模型预测相当的精度。 相似文献
15.
It has been demonstrated that precise point positioning (PPP) is a powerful tool in geodetic and geodynamic applications. As is known, it provides solutions in the reference system of the satellite orbits. We focuses on the strategy to transform PPP solutions into the International Terrestrial Reference System (ITRS) by applying a set of local Helmert transformation parameters obtained from a regional network rather than using global parameters. In order to carry out this test, a regional network composed of 14 stations was analyzed using GIPSY-OASIS II software, over a period of 6 years. Two solutions differently aligned to the ITRS were compared in terms of accuracy, scattering, frequency content and local movements. One solution is aligned to IGb08 through the X-files provided by JPL, while the other is aligned to the European reference frame densification of IGb08 using customized regional X-files. Therefore, both are updated realizations of the ITRS. The test shows that a regional, instead of a global, alignment to the ITRS can significantly improve the repeatability of the solutions. A small improvement can also be found in terms of agreement with the regional densification of IGb08. The analysis of the signal content in the differently aligned time series allowed some differences to be found, in terms of both frequency and magnitude. These differences are mainly due to an evident common signal that is defined for the whole area and which is removed when using regional alignment. Finally, residual scattering was calculated after removing the modeled signals from each time series, which results in a scatter being significantly smaller for the regional solution than for the global solution. In order to obtain these results, the choice of the reference stations is a major question and therefore discussed in detail. 相似文献
16.
17.
18.
研究利用现代大地测量的高新技术手段,在城市原有的坐标资料和水准、重力资料的基础上,建立平面、高程、重力场信息于一体的综合性高精度城市三维基础控制网,结合城市连续运行卫星定位服务系统(CORS)和高精度似大地水准面提高城市空间数据基础设施建设的水平。指出了建立连续运行卫星定位服务系统和高精度似大地水准面的途径及有关问题。 相似文献