共查询到20条相似文献，搜索用时 234 毫秒
1.
Gutowski Martin Bull Jon Henstock Tim Dix Justin Hogarth Peter Leighton Tim White Paul 《Marine Geophysical Researches》2002,23(5-6):481-492
Chirp sub-bottom profilers are marine sonar systems which use a highly repeatable source signature to facilitate the acquisition of correlated data with decimetre vertical resolution in the top 20–30 m of sediments. Source signatures can be readily developed and implemented, but an applicable methodology for assessing resolution and attenuation characteristics of these wide-band systems did not exist. Methodologies are developed and applied to seven contrasting source signatures which occupy the same frequency band, but differ in their Envelope and Instantaneous Frequency functions. For the Chirp source signatures tested, a Sine-Squared envelope function is shown to produce seismic data with the optimum resolution and penetration characteristics. 相似文献
2.
Chirp frequency-modulated (FM) systems offer deterministic, repeatable source-signatures for high-resolution, normal incidence marine seismic reflection data acquisition. An optimal processing sequence for uncorrelated Chirp data is presented to demonstrate the applicability of some conventional seismic reflection algorithms to high-resolution data sets, and to emphasise the importance of a known source-signature. An improvement of greater than 60dB in the signal- to-noise ratio is realised from correlating the FM reflection data with the transmitted pulse. Interpretability of ringy deconvolved data is enhanced by the calculation of instantaneous amplitudes. The signal-to-noise ratio and lateral reflector continuity are both improved by the application of predictive filters whose effectiveness are aided by the repeatability of the Chirp source. 相似文献
3.
S.A. Stewart 《Marine and Petroleum Geology》2011,28(5):959-965
Reflection seismic data is widely-used in industry and academia. It is often interpreted and displayed with considerable vertical exaggeration. Vertical exaggeration is defined as the vertical to horizontal aspect ratio of a reflection seismic cross section in depth. Recent literature is reviewed here to quantify for the first time the extent and typical values of vertical exaggeration in published work. Results are collated from 1437 papers published in 68 journals in the period 2006-2010. This broad scope is intended to provide a global view but it does not claim to be exhaustive. One example from each paper was analysed. Depth conversion was necessary in 74% of cases (every case of time-domain seismic with vertical exaggeration not stated). The main findings are that only 12% of papers use aspect ratios with vertical scale set approximately equal to horizontal scale (vertical exaggeration in the range 0.8-1.2). 75% of papers use reflection seismic with vertical exaggeration greater than 2. Splits of the data in terms of shallow high resolution seismic and deep, crustal imaging seismic were also obtained. The cause of this very widespread vertical exaggeration of reflection seismic cross sections is generally some form of display optimisation, such as emphasis of stratigraphic architectures or displaying long sections that would otherwise not fit on screen, or effects related to seismic sampling, but a specific reason is rarely stated. Angular relationships in stratigraphic and structural architectures are distorted so commonly that true geometries are rarely seen, which becomes an issue if readers are unfamiliar with these geometries. There is a clear opportunity for authors who display and publish reflection seismic data to annotate an estimate of vertical exaggeration alongside other standard annotation on seismic displays. 相似文献
4.
Jonathan M. Bull Martin Gutowski Justin K. Dix Timothy J. Henstock Peter Hogarth Timothy G. Leighton Paul R. White 《Marine Geophysical Researches》2005,26(2-4):157-169
Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce
decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp
system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and
precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity
was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz)
that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive
array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with
each hydrophone group containing four individual elements and a pre-amplifier.
After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver
geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real
Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown
that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal
positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software
aboard the acquisition vessel.
The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that
the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface. 相似文献
5.
海洋多道地震数据建模和成像是获取洋壳速度和构造信息的重要手段。海水层的存在使得多道地震拖缆接收到的折射波走时信息仅仅存在于较远的炮检距, 近炮检距被强振幅海底反射波覆盖, 制约了走时数据拾取和反演效果。本文基于波动方程的Kirchhoff积分法, 成功实现了多道地震数据向下延拓, 获取到了更大炮检距区间的初至折射波走时拾取, 并将其应用于洋中脊新生洋壳2A/2B层的合成多道地震数据走时反演。比较向下延拓前后的走时拾取范围及走时反演结果表明, 向下延拓法能够保持地震波场的运动学和动力学特征不变, 在共炮集数据的更大炮检距范围内进行初至折射走时拾取, 从而增加反演的数据选择和浅层射线覆盖, 反演结果能更加准确地分辨出洋壳2A/2B层界面, 并得到更高的分辨率和更准确的速度结构剖面。 相似文献
6.
Do equilibrium conditions exist during sediment transport studies on continental margins? An example from the East China Sea 总被引：1，自引：0，他引：1
Analysis of high-resolution (<1 m) GeoPulse seismic reflection and Chirp sonar data from the continental margin of the East China Sea reveals the presence of a thin (1- to 5-m-thick) sediment veneer over a highly reflective transgressive surface. Due to reverberation of the output signal and the effect of the bubble pulse, this veneer may erroneously be interpreted as a laterally continuous feature. Sonar data, which does not suffer from these ghosting effects, reveals that the sea bottom is often an erosional surface that exposes older, relict sediments, which were deposited under a radically different hydrodynamic regime than exists in these locations today. 相似文献
7.
Nouzé Hervé Sibuet Jean-Claude Savoye Bruno Marsset Bruno Thomas Yannick 《Marine Geophysical Researches》1997,19(5):379-395
The Pasisar seismic acquisition system combines a source at the sea surface and a deep-towed single channel streamer. This unconventional device geometry reduces the width of the first Fresnel zone which increases the lateral resolution. However, the device acquisition geometry generates artifacts on seismic profiles and induces large incidence angles of the seismic signal. A specific processing sequence must be applied to the data to obtain a readable seismic section. Penetration of the seismic signal depends on the energy of the signal reaching the seafloor and on its incidence angle. Because of smaller source energy, 800 Joules Sparker data cannot be acquired in water depth larger than 1500 m for example, whereas there is no depth limit for the use of this system with air gun sources. Differential acoustic absorption of seismic frequencies (below 1000 Hz) in the water column is negligible when compared with wave fronts expansion. Thus, the horizontal resolution of any seismic system strongly depends on the frequency spectrum of the seismic source and on the travel distances. Pasisar and conventional seismic profiles being usually simultaneously recorded, we illustrate the interest of using a hybrid seismic device by comparing horizontal resolutions as well as signal-to-noise ratio obtained with both the Pasisar and conventional systems. In addition, by carefully picking time arrivals of a reflection on simultaneously recorded surface and deep-towed seismic records, it is possible to estimate the average interval seismic velocity. We present the simplified example of a horizontal reflector. 相似文献
8.
天然气水合物是一种新型的清洁能源, 南海北部神狐海域的地质条件有利于水合物的形成和储藏。传统的多道地震(MCS)数据难以得到精确的速度信息, 并且只能从时间域上判断地质体纵向分布。海底地震仪(OBS)是一种常用的主动源地震仪器, 可以接收到更清晰的气枪信号。相比于MCS, OBS剖面上的折射震相可以揭示较深部的地层速度信息。文章结合MCS和OBS的优势, 识别水平叠加剖面上的反射层位, 并得到初始模型; 将OBS剖面和水平叠加剖面拼合, 从而判断OBS剖面上反射震相所对应层位; 拾取OBS台站上的反射和折射震相, 使用RayInvr软件正演模拟得到水合物存在区域的二维速度模型, 解决了MCS中较为困难的时深转换问题。最终模型显示了水合物、游离气区域的埋深、厚度和速度, 以及似海底反射(BSR)下方更深部界面的深度和速度特征。 相似文献
9.
J. M. Reynolds 《Marine Geophysical Researches》1990,12(1-2):41-48
High-frequency seismic reflection profiling is a well-established and often used technique in marine investigations. Traditionally seismic data are viewed as two-dimensional time sections. Given closely spaced profile lines, it is possible to produce posted two-way travel time maps of sub-surface reflectors which, when plotted as isometric displays, clearly show the three-dimensional spatial morphology of the sub-surface topography. With borehole control, such information can be used to provide a series of images which indicate temporal as well as spatial relationships of sub-surface reflectors. With the high-resolution afforded by high-frequency methods, detailed information on palaeo-environments can be reconstructed. Using the geophysical database as a basic framework, other aspects of the same environment can be examined in considerable detail. To demonstrate the effectiveness of these procedures, examples will be given from Plymouth Sound where a series of nested buried rock valleys has been mapped in detail from Sparker and Boomer surveys which have been interpreted in the light of newly-acquired borehole information. Isometric plots of the various sub-surface interfaces show how the channels have developed as sea level has risen over the last ca. 10,000 years. Different sedimentological facies can be resolved within the channel system thus providing information about the processes involved in their formation. Methods of improving the resolution and subsequent geological interpretation of high-resolution seismic reflection surveys are being developed for shallow marine and estuarine environments such as those found in Plymouth Sound. 相似文献
10.
A method of high resolution seismic velocity analysis for ocean bottom seismometer (OBS) records is applied to the study of the shallow oceanic crust, especially sedimentary and basement layers. This method is based on the direct-p mapping and the-sum inversion. We use data obtained from a 1989 airgun-OBS experiment in the northern Yamato Basin, Japan Sea and derive P- and S-wave velocity functions that can be compared with the seismic reflection profiles. Using split-spread profile records, we obtain interface dips and true interval velocities from the OBS data. These results show good agreement with the reflection profile records, the acoustic velocities of core samples, and sonic log profiles. We also present a method for estimating errors in the derived velocity functions by calculating covariance of the derived layers' thicknesses. The estimated depth errors are about 150 m at shallow depths, which is close to the seismic wavelength used. The high resolution of this method relies on accurate determination of shot positions by GPS, spatially dense seismic observations, and the use of unsaturated reflected waves arriving after the direct water wave that are observed on low-gain component records. 相似文献
11.
Tine Missiaen 《Marine Geophysical Researches》2005,26(2-4):145-155
The design of very high resolution (VHR) 3D marine surveys not only depends on the theoretical considerations of seismic imaging,
but is also dictated by the field conditions and the available budget. The main geophysical controlling factors include the
depth and dip of the target, and horizontal and vertical resolution. Working in shallow water environments and at high frequencies
will imply constraints on sampling, array directivity and positioning accuracy. In this paper we describe the main requirements
and constraints involved in VHR 3D acquisition. The second part of the paper focuses on the flexible acquisition system “Opus3D”
recently developed for shallow water investigations. The system provides improvements in imaging resolution in a relatively
simple and cost-effective way. Acquisition and positioning constraints limit the system to nearshore studies. The experience
gained from various surveys with this new acquisition system allow us to formulate a number of practical specifications and
guidelines for 3D survey design in shallow water. 相似文献
12.
Derman Dondurur Günay ÇifçiMahmut Göktu? Drahor Süleyman Co?kun 《Marine and Petroleum Geology》2011,28(8):1505-1516
Based on high-resolution Chirp seismic, multibeam bathymetry and side scan sonar data collected in the ?zmir Gulf, Aegean Sea in 2008 and 2010, gas-related structures have been identified, which can be classified into three categories: (1) shallow gas accumulations and gas chimneys, (2) mud diapirs, and (3) active and inactive pockmarks. On the Chirp profiles, shallow gas accumulations were observed along the northern coastline of the outer ?zmir Gulf at 3-20 m below the seabed. They appear as acoustic turbidity zones and are interpreted as biogenic gas accumulations produced in organic-rich highstand fan sediments from the Gediz River. The diapiric structures are interpreted as shale or mud diapirs formed under lateral compression due to regional counter-clockwise rotation of Anatolian microplate. Furthermore, the sedimentary structure at the flanks suggests a continuous upward movement of the diapirs. Several pockmarks exist close to fault traces to the east of Hekim Island; most of them were associated with acoustic plumes indicating active degassing during the survey period in 2008. Another Chirp survey was carried out just over these plumes in 2010 to demonstrate if the gas seeps were still active. The surveys indicate that the gas seep is an ongoing process in the gulf. Based on the Chirp data, we proposed that the pockmark formation in the area can be explained by protracted seep model, whereby sediment erosion and re-distribution along pockmark walls result from ongoing (or long lasting) seepage of fluids over long periods of time. The existence of inactive pockmarks in the vicinity, however, implies that gas seepage may eventually cease or that it is periodic. Most of the active pockmarks are located over the fault planes, likely indicating that the gas seepage is controlled by active faulting. 相似文献
13.
14.
High resolution Chirp and Sparker data allowed definition and mapping of distinct seismic units in the shallow sediment record (~100 ms) acquired from the southern exit of the Bosphorus Strait; a dynamic depositional environment. The bottommost unit observed in the Chirp data (unit-3) is made up of marine-lacustrine sediments thinning seaward and onlaps the basement rocks which are represented by folded strata in the Sparker data, possibly lower to middle Pleistocene age. It is overlain by a series of prograding deposits along the shelf (unit-2) referring to sediment input from the northern sector depending on the water levels of the paleo Marmara lake’s during MIS 3. The uppermost deposits (unit-1) close to the Bosphorus Strait were represented by three separate subunits, unlike to relatively thin drape of sediments observed at the other places in the surrounding regions. The detailed definition of these subunits deduced from the closely-spaced reflection profiles and available radiocarbon ages helped to explain the history of the latest stratigraphic development depending on the connections between the Black Sea and the Sea of Marmara. In addition to the previously proposed major conduits, which controlled the sedimentary deposition at the southern exit of the Bosphorus, namely the Bosphorus Strait and Kurba?al?dere River, another submarine sedimentary pathway at the eastern bank of the strait’s channel seems to have delivered sediments directly into the basin. 相似文献
15.
Liwen Chen Wu-Cheng Chi Char-Shine Liu Chun-Tien Shyu Yunshuen Wang Char-Yu Lu 《Marine Geophysical Researches》2012,33(4):379-388
Fluid migration rates are important parameters for understanding the structural characteristics and evolution of the crustal tectonics and hydrocarbon exploration. However, they are difficult to measure on the seafloor. Densely sampled temperature measurements might shed light on our study of the fluid migration rates. In this study, we first use reflection seismic data to derive geothermal gradient patterns at different sub-seafloor depths, then calculated 1D vertical fluid flow models by analyzing the Péclet numbers in the offshore regions of SW Taiwan. We found Péclet numbers ranging from 2 to 5, implying that vertical fluid flow velocities are between 6 and 44 cm/year. Assumed a homogenous permeable layer and no lateral variation of the temperature fields, we analyzed possible errors caused by depth-dependent thermal conductivity and velocity-depth function. They probably cause less than 2 cm/year of errors in the estimated vertical fluid flow rate. In terms of regional fluid flow patterns, we found higher fluid flow rates near the toe of the trench, and a dramatic increase in fluid flow rate when the continental slope of the Chinese passive margin enters into the trench, and reduced fluid flow rates in the hinterland. We propose that this is a new and potentially useful method to derive regional fluid flow rate models for studying geochemical and biological processes in shallow seafloor sediments and the regional hydrological budget. 相似文献
16.
17.
A 3-dimensional seismic reflection survey (using a Chirp source) of the excavated Mary Rose wreck site (King Henry VIII's flagship, wrecked in 1545) was conducted in the East Solent, off the south coast of England. The high resolution geophysical survey identified two ‘brightspot' anomalies, buried to a depth of 4–5 m, trending east–west adjacent to the western margin of the excavation hole. These anomalous reflectors are interpreted as infilled palaeo-scour features associated with the wrecking and subsequent degradation of the Mary Rose. The features were previously unrecognized on the site, and to the authors' knowledge this is the first time that such preserved longitudinal palaeo-scour marks have been recognized in the sedimentary record. Implications associated with the preservation and identification of the scour features are discussed. 相似文献
18.
《Marine Geology》2001,172(1-2):1-21
In this paper we present and discuss the frequency-dependent behaviour of the acoustic characteristics of methane hydrate-bearing sediments in Lake Baikal, Siberia. Five different types of seismic sources (airgun-array, two types of single airguns, watergun and sparker) are used, encompassing a frequency bandwidth from 10 up to 1000 Hz. On low-frequency airgun-array data, the base of the hydrate stability zone (HSZ) is observed as a high-amplitude bottom-simulating reflection (BSR) with reversed polarity. The amplitude and continuity of the BSR decrease or even disappear on medium- to high-frequency data, a feature explained in terms of vertical and horizontal resolution. The increasing reflection amplitude of the BSR with increasing offset, the calculated reflection coefficient of the BSR and the occurrence of enhanced reflections below the BSR suggest the presence of free gas below the HSZ. The observation of some enhanced reflections extending above the BSR may be interpreted as an indication for free gas co-existing with hydrates within the HSZ. Amplitude blanking above the BSR is highly variable while the BSR itself appears to act as a low-pass frequency filter for medium- to high-frequency data.New single-channel airgun profiles provide the first seismic information across the Baikal Drilling Project (BDP-97) deep drilling site, at which hydrate-bearing sediments were retrieved at about 200 m above the base of the local HSZ. At the drilling site there are no seismic characteristics indicative of the presence of hydrates. Combination of the drilling and seismic information has allowed us to make a rough estimation of the volume of hydrates and carbon stored in the sediments of Lake Baikal, which lead us to conclude that the Lake Baikal gas hydrate reservoirs do not form a prospective energy resource. 相似文献
19.
In the austral summer of 2007, 20.5 km of high-resolution over-sea-ice seismic reflection data were collected in the Granite
Harbor region of southern McMurdo Sound over the Mackay Sea Valley. The goal of the survey was to image thin pelagic sediment
deposited in the Mackay Sea Valley after the Last Glacial Maximum. A generator–injector air gun was lowered beneath the sea
ice through holes drilled by an auger drill system. The recording system was a 60 channel snow streamer with vertically oriented
gimbaled geophones spaced 25 m apart. Unique problems in the over-sea-ice seismic reflection survey—noise from the ice column
flexing and timing delays caused by trapped air at previous shot points—were overcome to improve the quality of the seismic
data. The Mackay Sea Valley survey produced seismic data with a vertical resolution of 6.3 m. The processed seismic data show
pelagic sediment thickness of up to 50 m within the Mackay Sea Valley with some locations showing possible older sediments
beneath the pelagic sediment layer. 相似文献
20.
南黄海西部海域高分辨率声学地层及其沉积环境 总被引：4，自引：0，他引：4
通过对高分辨率浅地层剖面的分析解译,对南黄海西部陆架区进行了声学地层划分。南黄海西部海域声学地层剖面可划分为5套地层Ⅰ、Ⅱ1、Ⅱ2、Ⅲ1、Ⅲ2,每套地层代表一次全球性(或区域性)海平面变化周期内的海进一海退这样一个完整的旋回变化过程所形成的海侵或海退沉积层序。将典型声学地层剖面与区内钻孔岩心的沉积地层岩性单元对比研究,得到各声学反射层的时代、岩性及沉积环境。并发现依据浅地层进行的声学地层划分与钻孔岩心的地质地层划分有较好的对应关系。结合区内钻孔岩心的分析结果,对晚更新世以来南黄海陆架区的沉积环境及沉积过程进行了探讨。 相似文献