共查询到20条相似文献，搜索用时 15 毫秒
1.
Matthew Browne Bruno Castelle Darrell Strauss Rodger Tomlinson Michael Blumenstein Chris Lane 《Coastal Engineering》2007
Estimation of swell conditions in coastal regions is important for a variety of public, government, and research applications. Driving a model of the near-shore wave transformation from an offshore global swell model such as NOAA WaveWatch3 is an economical means to arrive at swell size estimates at particular locations of interest. Recently, some work (e.g. Browne et al. [Browne, M., Strauss, D., Castelle, B., Blumenstein, M., Tomlinson, R., 2006. Local swell estimation and prediction from a global wind-wave model. IEEE Geoscience and Remote Sensing Letters 3 (4), 462–466.]) has examined an artificial neural network (ANN) based, empirical approach to wave estimation. Here, we provide a comprehensive evaluation of two data driven approaches to estimating waves near-shore (linear and ANN), and also contrast these with a more traditional spectral wave simulation model (SWAN). Performance was assessed on data gathered from a total of 17 near-shore locations, with heterogenous geography and bathymetry, around the continent of Australia over a 7 month period. It was found that the ANNs out-performed SWAN and the non-linear architecture consistently out-performed the linear method. Variability in performance and differential performance with regard to geographical location could largely be explained in terms of the underlying complexity of the local wave transformation. 相似文献
2.
Wave overtopping nearshore coastal structures, such as shore-parallel breakwaters, can significantly alter the current circulation and sediment transport patterns around the structures, which in turn affects the formation of tombolos and salients in the nearshore area. This paper describes the implementation of a wave overtopping module into an existing depth-averaged coastal morphological mode: COAST2D and model applications to investigate the effect of wave overtopping on the hydrodynamics and morphodynamics around a group of shore-parallel breakwaters. The hydrodynamic aspects of the model were validated against a series of laboratory conditions. The model was then applied to a study site at Sea Palling, Norfolk, UK, where 9 shore-parallel segmented breakwaters including 4 surface-piercing and 5 low-crested breakwaters are present, for the storm conditions in Nov 2006. The model results were compared with laboratory data and field measurements, showing a good agreement on both hydrodynamics and morphological changes. Further analysis of wave overtopping effect on the nearshore hydrodynamics and morphodynamics reveals that wave overtopping has significant impacts on the nearshore circulation, sediment transport and the resulting morphological changes within such a complex breakwater scheme under the storm and macro-tide conditions. The results indicate the importance of including the wave overtopping in modelling nearshore morphodynamics with the presence of coastal structures. 相似文献
3.
A.J.H.M. Reniers M.J. Groenewegen K.C. Ewans S. Masterton G.S. Stelling J. Meek 《Coastal Engineering》2010
The accuracy of nearshore infragravity wave height model predictions has been investigated using a combination of the spectral short wave evolution model SWAN and a linear 1D SurfBeat model (IDSB). Data recorded by a wave rider located approximately 3.5 km from the coast at 18 m water depth have been used to construct the short wave frequency-directional spectra that are subsequently translated to approximately 8 m water depth with the third generation short wave model SWAN. Next the SWAN-computed frequency-directional spectra are used as input for IDSB to compute the infragravity response in the 0.01 Hz–0.05 Hz frequency range, generated by the transformation of the grouped short waves through the surf zone including bound long waves, leaky waves and edge waves at this depth. Comparison of the computed and measured infragravity waves in 8 m water depth shows an average skill of approximately 80%. Using data from a directional buoy located approximately 70 km offshore as input for the SWAN model results in an average infragravity prediction skill of 47%. This difference in skill is in a large part related to the under prediction of the short wave directional spreading by SWAN. Accounting for the spreading mismatch increases the skill to 70%. Directional analyses of the infragravity waves shows that outgoing infragravity wave heights at 8 m depth are generally over predicted during storm conditions suggesting that dissipation mechanisms in addition to bottom friction such as non-linear energy transfer and long wave breaking may be important. Provided that the infragravity wave reflection at the beach is close to unity and tidal water level modulations are modest, a relatively small computational effort allows for the generation of long-term infragravity data sets at intermediate water depths. These data can subsequently be analyzed to establish infragravity wave height design criteria for engineering facilities exposed to the open ocean, such as nearshore tanker offloading terminals at coastal locations. 相似文献
4.
Wave dissipation by vegetation with layer schematization in SWAN 总被引：1，自引：0，他引：1
Tomohiro Suzuki Marcel ZijlemaBastiaan Burger Martijn C. MeijerSiddharth Narayan 《Coastal Engineering》2012,59(1):64-71
The energy of waves propagating through vegetation is dissipated due to the work done by the waves on the vegetation. Dalrymple et al. (1984) estimated wave dissipation by integrating the force on a cylinder over its vertical extent. This was extended by Mendez and Losada (2004) to include varying depths and the effects of wave damping due to vegetation and wave breaking for narrow-banded random waves. This paper describes the wave dissipation over a vegetation field by the implementation of the Mendez and Losada formulation in a full spectrum model SWAN, with an extension to include a vertical layer schematization for the vegetation. The present model is validated with the original equation and results from Mendez and Losada (2004). The sensitivity of the model to the shape of the frequency spectrum, directional spreading and layer schematization are investigated. The model is then applied to field measurements by using a vegetation factor. This model has the ability to calculate two-dimensional wave dissipation over a vegetation field including some important aspects such as breaking and diffraction as used in SWAN model. 相似文献
5.
Several Wave Energy Converters (abbreviated as WECs) have intensively been studied and developed during the last decade and currently small farms of WECs are getting installed. WECs in a farm are partly absorbing, partly redistributing the incident wave power. Consequently, the power absorption of each individual WEC in a farm is affected by its neighbouring WECs. The knowledge of the wave climate around the WEC is needed to predict its performance in the farm. In this paper a technique is developed to implement a single and multiple WECs based on the overtopping principle in a time-dependent mild-slope equation model. So far, the mild-slope equations have been widely used to study wave transformations around coastal and offshore structures, such as breakwaters, piles of windmills and offshore platforms. First the limitations of the WEC implementation are discussed through a sensitivity analysis. Next the developed approach is applied to study the wave height reduction behind a single WEC and a farm. The wake behind an isolated WEC is investigated for uni- and multidirectional waves; it is observed that an increase of the directional spread leads to a faster wave redistribution behind the WEC. Further the wake in the lee of multiple WECs is calculated for two different farm lay-outs, i.e. an aligned grid and a staggered grid, by adapting the performance of each WEC to its incident wave power. The evolved technique is a fast tool to find the optimal lay-out of WECs in a farm and to study the possible influence on surrounding activities in the sea. 相似文献
6.
Conventional spectral wave models, which are used to determine wave conditions in coastal regions, can account for all relevant processes of generation, dissipation and propagation, except diffraction. To accommodate diffraction in such models, a phase-decoupled refraction–diffraction approximation is suggested. It is expressed in terms of the directional turning rate of the individual wave components in the two-dimensional wave spectrum. The approximation is based on the mild-slope equation for refraction–diffraction, omitting phase information. It does therefore not permit coherent wave fields in the computational domain (harbours with standing-wave patterns are excluded). The third-generation wave model SWAN (Simulating WAves Nearshore) was used for the numerical implementation based on a straightforward finite-difference scheme. Computational results in extreme diffraction-prone cases agree reasonably well with observations, analytical solutions and solutions of conventional refraction–diffraction models. It is shown that the agreement would improve further if singularities in the wave field (e.g., at the tips of breakwaters) could be properly accounted for. The implementation of this phase-decoupled refraction–diffraction approximation in SWAN shows that diffraction of random, short-crested waves, based on the mild-slope equation can be combined with the processes of refraction, shoaling, generation, dissipation and wave–wave interactions in spectral wave models. 相似文献
7.
The SWAN model used to study wave evolution in a flume 总被引：1，自引：0，他引：1
Deborah J. Wood Research Assistant Markus Muttray Research Engineer Professor Hocine Oumeraci 《Ocean Engineering》2001,28(7)
The SWAN numerical model is used to model the evolution of JONSWAP wave spectra and hence the significant wave height of waves in a tank. Comparison with experiment has shown that modelling triad interactions in the numerical model leads to too low predictions of spectra and significant wave height and should therefore be excluded. The modelling of the breaking constant was also investigated, by looking at the use of a constant breaking constant, Nelson formula, and Goda formula (added into SWAN for this study). Using a constant value of 0.78 within SWAN gave the best comparison between theory and experiment. 相似文献
8.
A study of marine breezes and their impact on the wave field around Mallorca Island was carried out by numerical simulations with the spectral wave model SWAN and three different wind fields: WRF – Weather Research and Forecasting model, HIRLAM – High Resolution Limited Area model and ECMWF – European Center for Medium-range Weather Forecasts. The main characteristics of the modelled breeze circulation and its effects on the wave field are analyzed. The modified wave field under breeze conditions and the correlations with their variability and daily short life time period are studied and discussed by analyzing the spectral balance. The results show that the accuracy of a wave forecast will depend on the quality of the wind field and its ability to simulate the sea breeze induced waves. The study period covers the summers of 2009 and 2010. In addition, to assess the performance of SWAN forced with two different winds the numerically obtained significant wave heights (Hs) are collocated against the ENVISAT-ESA's Environmental Satellite measurements (GLOBWAVE data) of Hs around the Mallorca Island. 相似文献
9.
《Coastal Engineering》1999,36(1):17-36
A time domain method is presented for analyzing simultaneous measurements of pressure and the horizontal components of velocity obtained beneath irregular multidirectional wave fields. This new method differs from the usual linear directional analyses applied to PUV data in two important aspects. First, the essential nonlinearity of the measured waves is not sacrificed to achieve a solution. Therefore, predictions of sea surface elevation and directional kinematics throughout the water column accurately portray the actual nonlinear character of the waves. Second, the analysis method is `local' in that it can be applied to segments of PUV time series much shorter than an individual wave. The viability of the locally nonlinear methodology developed in this paper is proven by demonstrating agreement with higher-order theoretical steady waves. Predictions of sea surface elevation and wave kinematics are also made using actual measurements from PUV instruments at two ocean sites off the west coast of the United States. 相似文献
10.
This is a Part I of a paper of nonlinearities of wind waves in the deep open ocean. First, considerations are given in order to verify the theoretical expression for bound waves from observed data. We compare the contribution of bound waves and double Bragg scattering to the second-order scattering, and we show that the contribution of bound waves is larger, and that bound waves can be detected by measuring the Doppler spectra of HF (high-frequency) radio wave scattering from the sea surface. Moreover, if the theory of the HF radio wave scattering from the sea surface is verified, so is the second-order perturbation theory for bound waves. Then, the contributions of bound waves to ocean wave spectra are investigated on the basis of the nonlinear theory. The bound waves are shown to modify frequency spectra and wave directional distributions at higher frequencies, and it is shown that although the modifications of frequency spectra are smaller for a two-dimensional field case than for a one-dimensional field case, they are not negligible at higher frequencies. On the other hand, the modifications of wave directional distributions are shown to be significant at higher frequencies. These discussions become significant only when bound wave predictions are verified in the open ocean. Consequently, it is shown that nonlinearities of water waves are important in considering both radio wave scattering from the sea surface and the detailed structures of ocean wave spectra at high frequencies. 相似文献
11.
A numerical model is presented to predict the interaction of multidirectional random surface waves with one or more rectangular submarine pits. The water depth is assumed uniform and the method involves the superposition of diffraction solutions based on linearized shallow water wave theory obtained by a two-dimensional boundary integral approach. The incident wave conditions are specified using a discrete form of the Mitsuyasu directional spectrum. The present numerical model has been validated through comparisons with previous theoretical results for regular waves. Good agreement was obtained in all cases. Based on these comparisons it is concluded that the present numerical model is an accurate and efficient tool to predict the wave field around multiple submarine pits and navigation channels in many practical situations. 相似文献
12.
A comparison of the diffraction of multidirectional random waves using several selected wave spectrum models is presented in this paper. Six wave spectrum models, Bretschneider, Pierson–Moskowitz, ISSC, ITTC, Mitsuyasu, and JONSWAP spectrum, are considered. A discrete form for each of the given spectrum models is used to specify the incident wave conditions. Analytical solutions based on both the Fresnel integrals and polynomial approximations of the Fresnel integrals and numerical solutions of a boundary integral approach have been used to obtain the two-dimensional wave diffraction by a semi-infinite breakwater at uniform water depth. The diffraction of random waves is based on the cumulative superposition of linear diffraction solution. The results of predicted random wave diffraction for each of the given spectrum models are compared with those of the published physical model presented by Briggs et al. [1995. Wave diffraction around breakwater. Journal of Waterway, Port, Coastal and Ocean Engineering—ASCE 121(1), 23–35]. Reasonable agreement is obtained in all cases. The effect of the directional spreading function is also examined from the results of the random wave diffraction. Based on these comparisons, the present model for the analysis of various wave spectra is found to be an accurate and efficient tool for predicting the random wave field around a semi-infinite breakwater or inside a harbor of arbitrary geometry in practical applications. 相似文献
13.
New version of SWAN model includes the wave diffraction effect which is the main improvement compared with the previous versions.Experimental data collected in the wave basin of the University of Delaware were used to test its performance.Wave heights were compared in the four cases(with different wave energies and directional spreading spectra).The results agreed well with the measurements,especially for the broad directional spectra cases.The effect of wave diffraction was analyzed by switching on/off the corresponding term.By introducing the diffraction term,the distributions of wave height and wave direction were smoothed,especially obvious for the narrow spectrum cases.Compared with the calculations without diffraction,the model with diffraction effect gave better results. 相似文献
14.
In this paper, performance of solid and perforated Π-type breakwaters was investigated experimentally. Both regular and irregular waves were used during testing. Four depths of immersions were selected for each breakwater and wave type. Different wave groups were generated over these breakwaters, and the transmission, reflection and energy-dissipation characteristics were determined. The results of the experimental study were evaluated and some empirical expressions based on the results were suggested to define the transmission, reflection and energy-dissipation coefficients for different immersion depths of solid and perforated breakwaters under regular and irregular waves. Moreover, performance of solid and perforated Π-type breakwaters were compared with that of solid and perforated U-type breakwaters investigated by Günaydın and Kabdaşlı [2006. Performance of solid and perforated U-type breakwaters under regular and irregular waves. Ocean Engineering 31, 1377–1405]. These comparisons showed that the most reasonable model and wave type are selected to determine requiring performance parameters. 相似文献
15.
This study investigates the effectiveness of a revised whitecapping source term in the spectral wind wave model SWAN (Simulating WAves Nearshore) that is local in frequency space, nonlinear with respect to the variance density and weakly dependent on the wave age. It is investigated whether this alternative whitecapping expression is able to correct the tendency towards underprediction of period measures that has been identified in the default SWAN model. This whitecapping expression is combined with an alternative wind input source term that is more accurate for young waves than the default expression. The shallow water source terms of bottom friction, depth-induced breaking and triad interaction are left unaltered. It is demonstrated that this alternative source term combination yields improved agreement with fetch- and depth-limited growth curves. Moreover, it is shown, by means of a field case over a shelf sea, that the investigated model corrects the erroneous overprediction of wind-sea energy displayed by the default model under combined swell-sea conditions. For a selection of field cases recorded at two shallow lakes, the investigated model generally improves the agreement with observed spectra and integral parameters. The improvement is most notable in the prediction of period measures. 相似文献
16.
长江口附近海域台风浪的数值模拟--以鹿沙台风和森拉克台风为例 总被引：18，自引：0，他引：18
利用SWAN波浪模型计算长江口附近海域的台风浪,鉴于长江河口岸界和地形复杂,拟采用曲线网格.为证实曲线网格下的SWAN模型对于复杂地形的有效性,首先选用美国特拉华大学波浪水池实验资料对SWAN模型进行检验,结果表明利用曲线网格能不过多增加计算量而提高关键区域的计算精度.以0215号鹿沙台风和0216号森拉克台风为例,将SWAN模型应用到长江口附近海域,进行台风浪的数值模拟.通过浮标测站实测资料验证,表明有效波高计算值与实测值符合良好.通过综合分析模型计算的波浪场,说明SWAN模型能合理地反映长江口附近海域台风浪的分布. 相似文献
17.
基于Galieo变换，导出了运动坐标系与静止坐标系中海浪谱间的关系。由于海浪是频散的，两者间的关系是频率相关的。运动坐标系中的海浪频谱是与静止坐标系中的海浪方向谱相联系的。以文氏谱作为静止坐标系中的海浪频谱，给出了不同速度下运动坐标系中的海浪频谱。 相似文献
18.
Over the last 15 years improved awareness of wave impact induced failures has focused attention on the need to account for the dynamic response of maritime structures to wave impact load. In this work a non-linear model is introduced that allows evaluating the effective design load and the potential sliding of caisson breakwater subject to both pulsating and impulsive wave loads. The caisson dynamics is modelled using a time-step numerical method to solve numerically the equations of motion for a rigid body founded on multiple non-linear springs having both horizontal and vertical stiffness. The model is first shown to correctly describe the dynamics of caisson breakwaters subject to wave attack, including nonlinear features of wave–structure–soil interaction. Predictions of sliding distances by the new method are then compared with measurements from physical model tests, showing very good agreement with observations. The model succeeds in describing the physics that stands behind the process and is fast, accurate and flexible enough to be suitable for performance design of caisson breakwaters. 相似文献
19.
To study the influence of wave obliquity and directional spreading on wave overtopping of rubble mound breakwaters a total of 736 three-dimensional model tests were carried out at Aalborg University. The results of these tests are presented and analysed in this paper yielding a new empirical reduction factor to describe the influence of wave obliquity and directional spreading on the average wave overtopping discharges. The study shows that perpendicularly incident, long-crested waves result in conservative values of the overtopping discharge for the tested cross-section. 相似文献
20.
The vertically-integrated effect of interaction between waves and wave-induced currents on wave transformation over a submerged elliptic shoal was investigated based on numerical simulations of the Vincent and Briggs experiment [Vincent, C.L., Briggs, M.J., 1989. Refraction- diffraction of irregular waves over a mound. Journal of Waterway, Port, Coastal and Ocean Engineering, 115(2), pp. 269–284.]. The numerical simulations were performed using two numerical wave-current model systems: one, a combination of the wave model SWAN and the current model SHORECIRC, and the other, a combination of the wave model REF/DIF and the same current model. A time-dependent, phase-resolving wave and current model, FUNWAVE, was also utilized to simulate the experiment. In the simulations, the developed wave-induced currents defocused waves behind the shoal and brought on a wave shadow zone that showed relatively low wave height distributions. For the breaking case of monochromatic waves, the wave heights computed using FUNWAVE showed good agreement with the measurements and the resulting wave-induced currents showed a jet-like velocity distribution in transverse direction. And the computed results of the two model combinations agreed better with the measurements than the computed results obtained by neglecting wave-current interaction. However, it was found that for the case in which transverse interference pattern caused by refracted waves was strong, REF/DIF-SHORECIRC did not correctly evaluate radiation stresses, the gradients of which generate wave-induced currents. SWAN-SHORECIRC, which cannot deal with the interference patterns, predicted a jet-like wave-induced current. For breaking random wave cases, the computed results of the two model combinations and FUNWAVE agreed well with the measurements. The agreements indicate that it is necessary to take into account the effect of wave-induced current on wave refraction when wave breaking occurs over a submerged shoal. 相似文献