首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 599 毫秒
1.
Simrad EM12 backscatter strength data of the Southwest Indian Ridge (SWIR), between 57°E and 70°E, are used to reveal the along-axis segmentation of this super slow-spreading ridge. The backscatter properties of different geologic domains, like bathymetric highs and oblique basins within the rift valley, are characterized using 66 small test sites. We show that backscatter strength is higher on bathymetric swells, corresponding to segment centres, and lower in deep oblique basins corresponding to axial non-transform discontinuities and fracture zones. This contrast between segment centres and discontinuities is produced by both a thicker sediment cover and less frequent volcanic eruptions at segment ends. Using the model of Mitchell (1993), sediments have been estimated to be 2 to 5 m thicker in these areas than at segment centres. The distribution of the seamounts within the rift valley is controlling the long-wavelength variations of the mean backscatter strength calculated along the axis. Lower densities of seamounts and thicker sediments are producing lower and heterogeneous reflectivity levels in the deepest part of the axial valley floor between 61°45′E and 63°45′E. We propose that cooler mantle temperatures inducing construction of fewer volcanoes occur beneath this part of the ridge. The mean backscatter strength along the SWIR axis decreases dramatically toward the Rodrigues Triple Junction suggesting that volcanic production is reduced between 68°20′E and 69°20′E and that the transition from amagmatic tectonic deformation at the triple junction to new seafloor spreading occurs between 69°20′E and 70°E.  相似文献   

2.
The analysis of multibeam bathymetric data of the Southwest Indian Ridge(SWIR) domain between the triple junction traces from 68° E to theRodrigues Triple Junction (RTJ; 70° E) reveals the evolution of thisridge since magnetic anomaly 4 (8 Ma). Image processing has been used toshow that the horizontal component of strain due to a network of normal stepfaults increases dramatically between 69°30 E and the RTJ. Thisarea close to the RTJ is characterized by a deep graben at the foot of thetriple junction trace on the African plate and by a narrow fault-boundedridge that joins an offset of the trace on the Antarctic plate. In thatarea, spreading is primarily amagmatic and dominated by tectonic extensionprocesses. To the west of 69°30 E, some lobate bathymetricfeatures atop of a large topographic high suggest volcanic constructions.Between 68°10 E and 69°25 E the southern flank of theSWIR domain is wider than the northern one and is characterized by a series of 7 en echelon bathymetric highs similar in size,shape and orientation to the one centred at 69°30E near the present-day triple junction. Their en echelon organization along the triple junction trace on the Antarctic plate and the typical lack of conjugated parts on the northern flank show that these bathymetric highs have been shifted to the south by successive northward relocalisations of the SWIR rifting zone. This evolution results in the asymmetric spreading of the SWIR in the survey area. The off-axis bathymetric highs connect to the offsets of the triple junction trace on the Antarctic plate when the Southeast Indian Ridges lightly lengthenstoward the northwest and the triple junction is relocated to the north. We propose that the SWIR lengthens toward the northeast with two propagation modes: 1) a continuous and progressive propagation with distributed deformation in preexisting crust of the Central Indian Ridge, 2) a discontinuous propagation with focusing of the deformation in a rift zone when the triple junction migrates rapidly to the north. The modes of propagation of the SWIR are related to different localisation and distribution of strain which are in turn controlled by changes of the triple junction configurations due to propagation, recession or a symmetric spreading on the Central and Southeast Indian Ridges.  相似文献   

3.
Geophysical data from 900 km of the Southwest Indian Ridge are used todescribe the pattern of evolution of the plate boundary between 61° Eand 70° E over the past 20 million years. The SWIR is anobliquely-opening, ultra slow-spreading axis, and east of61° E comprises a series of ridge sections, each about 100–120 kmin length. The orientation of these sections varies fromsub-orthogonal to oblique to the approximately N–S spreadingdirection. In general, the suborthogonal sections are shallower, commonlysubdivided into an array of discrete axial segments, and carry recognisablecentral magnetic anomalies. The majority of the oblique sections are single,continuous rifts without continuous axial magnetic signatures.Morphotectonics of the Southwest Indian Ridge crust have not previously beenwell constrained off-axis, and we here present sidescan sonar andswath bathymetric data up to 100 km from the ridge to demonstrate the complexities of its spatial and temporal evolution.A model is proposed that the segmentation style correlates with analong-axis variation between: (a) relatively thick crustal sections which overlie mantle sections with higher magmatic supply created in orthogonally-spreading segments and (b) those oblique sections associated with cooler, magmatically-starved mantle and thinner crust. These latter sections are formed at broad offset zones in theplate boundary, more precisely defined on faster-spreading ridges asnontransform discontinuities. The nonsystematic pattern of crustalconstruction, extensional basin formation and the absence of extension-parallel traces of discontinuities off-axis suggest that the oblique spreading sections are not fixed in space or time.  相似文献   

4.
 Swath bathymetric, gravity, and magnetic studies were carried out over a 55 km long segment of the Central Indian Ridge. The ridge is characterized by 12 to 15 km wide rift valley bounded by steep walls and prominent volcanic constructional ridges on either side of the central rift valley. A transform fault at 7°45′S displaces the ridge axis. A mantle Bouguer anomaly low of −14 mGals and shallowing of rift valley over the middle of the ridge segment indicate along axis crustal thickness variations. A poorly developed neovolcanic zone on the inner rift valley floor indicate dominance of tectonic extension. The off-axis volcanic ridgs suggest enhanced magmatic activity during the recent past. Received: 24 May 1996 / Rivision received: 13 January 1997  相似文献   

5.
Bathymetric data along the Southwest Indian Ridge (SWIR) between 57°E and 70° E have been used to analyze the characteristics of thesegmentation and the morphotectonic variations along this ridge. Higheraxial volcanic ridges on the SWIR than on the central Mid-Atlantic Ridge(MAR) indicate that the lithosphere beneath the SWIR axis that supportsthese volcanic ridges, is thicker than the lithosphere beneath the MAR. Astronger/thicker lithosphere allows less along-axis melt flow andenhances the large crustal thickness variations due to 3D mantle upwellings.Magmatic processes beneath the SWIR are more focused, producing segmentsthat are shorter (30 km mean length) with higher along-axis relief (1200 mmean amplitude) than on the MAR. The dramatic variations in the length andamplitude of the swells (8–50 km and 500–2300 m respectively),the height of axial volcanic ridges (200–1400 m) and the number ofvolcanoes (5–58) between the different types of segments identifiedon the SWIR presumably reflect large differences in the volume, focusing andtemporal continuity of magmatic upwelling beneath the axis. To the east ofMelville fracture zone (60°42 E), the spreading center isdeeper, the bathymetric undulation of the axial-valley floor is less regularand the number of volcanoes is much lower than to the west. The spreadingsegments are also shorter and have higher along-axis amplitudes than to thewest of Melville fracture zone where segments are morphologically similar tothose observed on the central MAR. The lower magmatic activity together withshorter and higher segments suggest colder mantle temperatures withgenerally reduced and more focused magma supply in the deepest part of thesurvey area between 60°42 E and 70° E. The non-transformdiscontinuities show offsets as large as 70 km and orientations up toN36° E as compared to the N0° E spreading direction. We suggest thatin regions of low or sporadic melt generation, the lithosphere neardiscontinuities is laterally heterogeneous and mechanically unable tosustain focused strike-slip deformation.  相似文献   

6.
The junction between oceanic crust generated, within the Antarctic plate, at the Southeast Indian Ridge and the Southwest Indian Ridge has been studied using a SEABEAM swathe bathymetry mapping system and other geophysical techniques between the Indian Ocean Triple Junction (approximately 25°S, 70° E), and a point some 500 km to the southwest (at 28°25 S, 66°35 E). The morphotectonic boundary which marks this trace of the ridge-ridge-ridge triple junction is complex and varies with age. Recent theories proposing a cyclicity of volcanic and tectonic processes at this mode of triple junctions appear to be supported by a series of regularly spaced, en echelon escarpments facing the slowly spreading (0.6 to 0.8 cm a-1, half rate) Southwest Indian Ridge axis. The en echelon escarpments intersect at approximately right angles with the regularly spaced oceanic spreading fabric formed on the Antarctic plate at the Southeast Indian Ridge and together locally flank uplifted northward-pointing corner sections of ocean floor. The origins for the localised elevations are unclear, but may relate to intermittent and/or alternating rifting and volcanic episodes. Variations of degree of asymmetry and/or obliquity in spreading on the Central Indian Ridge and the Southwest Indian Ridge are suggested to explain detailed structural changes along the triple junction trace. It is suggested that discontinuities of the trace may be related to an intermittent development of new spreading centres beneath the most easterly part of the Southwest Indian Ridge, coupled with a more continuous process beneath the faster spreading Central Indian Ridge (2 to 2.5 cm a-1) and the Southeast Indian Ridge (2.5 to 3 cm a-1). A detailed history of triple junction evolution may be thus inferred from basic morphological and structural mapping along the three triple junction traces.  相似文献   

7.
The morphotectonic features and their evolution of the central Southwest Indian Ridge （SWIR） are dis- cussed on the base of the high-resolution flfll-coverage bathyraetric data on the ridge between 49°-51°E. A comparative analysis of the topographic features of the axial and flank area indicates that the axial topogra- phy is alternated by the ridge and trough with en echelon pattern and evolved under a spatial-temporal mi- gration especially in 49°-50.17°E. It is probably due to the undulation at the top of the mantle asthenosphere, which is propagating with the mantle flow. From 50.17° to 50.7°E, is a topographical high terrain with a crust much thicker than the global average of the oceanic crust thickness. Its origin should be independent of the spreading mechanism of ultra-slow spreading ridges. The large numbers of volcanoes in this area indicate robust magmatic activity and may be related to the Crozet hot spot according to RMBA （residual mantle Bouguer anomaly）. The different geomorphological feature between the north and south flanks of the ridge indicates an asymmetric spreading, and leading to the development of the OCC （oceanic core complex）. The tectonic activity of the south frank is stronger than the north and is favorable to develop the OCC. The first found active hydrothermal vent in the SWIR at 37°47＇S, 49°39＇E is thought to be associated with the detach- ment fault related to the OCC.  相似文献   

8.
A 2°×2° map of spreading centres and fracture zones surrounding the Indian Ocean RRR triple junction, at 25.5°S, 70°E, is described from a data set of GLORIA side-scan sonar images, bathymetry, magnetic and gravity anomalies. The GLORIA images show a pervasive fabric due to linear abyssal hills oriented parallel to the two medium-spreading ridges (the Central Indian Ridge (CIR) and Southeast Indian Ridge (SEIR)). A cuvature of the fabric occurs along fracture zones, which are also located by lows in the bathymetry and gravity data and by offsets between magnetic anomalies. The magnetic anomalies also record periods of asymmetric spreading marking the development of the fracture zones, including the birth, at anomaly 2A, of a short fracture zone 50 km north of the triple junction on the CIR, and its death near the time of the Jaramillo anomaly. In some localities, a fine-scale fabric corresponds to a coarser fabric on the opposite flank of the CIR, possibly indicating a persistent asymmetry in the faulting at the median valley walls if the fabric has a tectonic and not a volcanic origin. A plate velocity analysis of the triple junction shows that both the CIR and Southwest Indian Ridge (SWIR) are propagating obliquely; the CIR appears to form an oblique trend by segmenting into a series of almost normally-oriented segments separated by short-offset fracture zones. For the last 4 m.y., the abyssal hill lineations indicate that the CIR segment immediately north of the triple junction has been spreading with an average 10° obliquity. The present small 5 km offset of the centres of the CIR and SEIR median valleys (Munschy and Schlich, 1989) is shown to be the result of this obliquity and a 30% spreading asymmetry between anomaly 2 and the Jaramillo on the CIR segment immediately north of the triple junction.  相似文献   

9.
The Rodriguez Triple Junction (RTJ) corresponds to the junction of the three Indian Ocean spreading ridges. A detailed survey of an area of 90 km by 85 km, centered at 25°30 S and 70° E, allows detailed mapping (at a scale of 1/100 000) of the bathymetry (Seabeam) and the magnetic anomalies. The Southeast Indian Ridge, close to the triple junction, is a typical intermediate spreading rate ridge (2.99 cm a-1 half rate), trending N140°. The Central Indian Ridge rift valley prolongs the Southeast Indian Ridge rift valley with a slight change of orientation (12°). The half spreading rate and trend of this ridge are 2.73 cm a-1 and N152° respectively. In contrast, the Southwest Indian Ridge close to the triple junction is expressed by two deep-valleys (4300 and 5000 m deep) which abut the southwestcrn flanks of the two other ridges, and appears to be a stretched area without axial neovolcanic zone. The evolution of the RTJ is analysed for the past one million years. The instantaneous velocity triangle formed by the three ridges cannot be closed indicating that the RTJ is unstable. A model is proposed to explain the evolution of the unstable RRF Rodriguez Triple Junction. The model shows that the axis of the Central Indian Ridge is propressively offset from the axis of the Southeast Indian Ridge at a velocity of 0.14 cm a-1, the RTJ being restored by small jumps. This unstable RRF model explains the directions and offsets which are observed in the vicinity of the triple junction. The structure and evolution of the RTJ is similar to that of the Galapagos Triple Junction located in the East Pacific Ocean and the Azores Triple Junction located in the Central Atlantic Ocean.  相似文献   

10.
The morphological characteristics of the segmentation of the Central Indian Ridge (CIR) from the Indian Ocean Triple Junction (25°30S) to the Egeria Transform Fault system (20°30S) are analyzed. The compilation of Sea Beam data from R/VSonne cruises SO43 and SO52, and R/VCharcot cruises Rodriguez 1 and 2 provides an almost continuous bathymetric coverage of a 450-km-long section of the ridge axis. The bathymetric data are combined with a GLORIA side-scan sonar swath to visualize the fabric of the ridge and complement the coverage in some areas. This section of the CIR has a full spreading rate of about 50 mm yr–1, increasing slightly from north to south. The morphology of the CIR is generally similar to that of a slow-spreading center, despite an intermediate spreading rate at these latitudes. The axis is marked by an axial valley 5–35 km wide and 500–1800 m deep, sometimes exhibiting a 100–600 m-high neovolcanic ridge. It is offset by only one 40km offset transform fault (at 22°40S), and by nine second-order discontinuities, with offsets varying from 4 to 21 km, separating segments 28 to 85 km long. The bathymetry analysis and an empirical orthogonal function analysis performed on across-axis profiles reveal morphologic variations in the axis and the second-order discontinuities. The ridge axis deepens and the relief across the axial valley increases from north to south. The discontinuities observed south of 22°S all have morphologies similar to those of the slow-spreading Mid-Atlantic Ridge. North of 22°S, two discontinuities have map geometries that have not been observed previously on slow-spreading ridges. The axial valleys overlap, and their tips curve toward the adjacent segment. The overlap distance is 2 to 4 times greater than the offset. Based on these characteristics, these discontinuities resemble overlapping spreading centers (OSCs) described on the fast-spreading EPR. The evolution of one such discontinuity appears to decapitate a nearby segment, as observed for the evolution of some OSCs on the EPR. These morphological variations of the CIR axis may be explained by an increase in the crustal thickness in the north of the study area relative to the Triple Junction area. Variations in crustal thickness could be related to a broad bathymetric anomaly centered at 19°S, 65°E, which probably reflects the effect of the nearby Réunion hotspot, or an anomaly in the composition of the mantle beneath the ridge near 19°S. Other explanations for the morphological variations include the termination of the CIR at the Rodriguez Triple Junction or the kinematic evolution of the triple junction and its resultant lengthening of the CIR. These latter effects are more likely to account for the axial morphology near the Triple Junction than for the long-wavelength morphological variation.  相似文献   

11.
A three-dimensional analysis of gravity andbathymetry data has been achieved along the Southwest Indian Ridge (SWIR)between the Rodriguez Triple Junction (RTJ) and the Atlantis II transform,in order to define the morphological and geophysical expression ofsecond-order segmentation along an ultra slow-spreading ridge(spreading rate of 8 mm/yr), and to compare it with awell-studied section along a slow-spreading ridge (spreadingrate of 12.5 mm/yr): the Mid-Atlantic Ridge (MAR) between 28°and 31°30 N.Between the Atlantis II transform and theRTJ, the SWIR axis exhibits a deep axial valley with an 30°oblique trend relative to the north–south spreading direction. Onlythree transform faults offset the axis, so the obliquity has to beaccommodated by the second-order segmentation. Alongslow-spreading ridges such as the MAR, second-order segmentshave been defined as linear features perpendicular to the spreadingdirection, with a shallow axial valley floor at the segment midpoint,deepening to the segment ends, and are associated with Mantle BouguerAnomaly (MBA) lows. Along the SWIR, our gravity study reveals the presenceof circular MBA lows, but they are spaced further apart than expected. Thesegravity lows are systematically centred over narrow bathymetric highs, andinterpreted as the centres of spreading cells. However, along some obliquesections of the axis, the valley floor displays small topographicundulations, which can be interpreted as small accretionary segments frommorphological analysis, but as large discontinuity domains from thegeophysical data. Therefore, both bathymetry and MBA variations have to beused to define the second-order segmentation of an ultraslow-spreading ridge. This segmentation appears to be characterisedby short segments and large oblique discontinuity domains. Analysis of alongaxis bathymetric and gravimetric profiles exhibits three different sectionsthat can be related to the thermal structure of the lithosphere beneath theSWIR axis.The comparison between characteristics of segmentationalong the SWIR and the MAR reveals two major differences: first, the poorcorrelation between MBA and bathymetry variations and second, the largerspacing and amplitude of MBA lows along the SWIR compared to the MAR. Theseobservations seem to be correlated with the spreading rate and the thermalstructure of the ridge. Therefore, the gravity signature of the segmentationand thus the accretionary processes appear to be very different: there areno distinct MBA lows on fast-spreading ridges, adjacent ones on slowspreading ridges and finally separate ones on ultra slow-spreadingridges. The main result of this study is to point out that 2nd ordersegmentation of an ultra slow-spreading ridge is characterised bywide discontinuity domains with very short accretionary segments, suggestingvery focused mantle upwelling, with a limited magma supply through a cold,thick lithosphere. We also emphasise the stronger influence of themechanical lithosphere on accretionary processes along an ultra slow-spreading ridge.  相似文献   

12.
The present morphology and tectonic evolution of more than 1500 kilometres of the Central Indian Ridge are described and discussed following the integration of GLORIA side-scan sonographs with conventional geophysical datasets. Segmentation of the ridge occurs by a series of ridge axis discontinuities ranging in periodicity along strike from 275 km to less than 30 km. These segment boundaries we have classified into two types: first order fracture zones of offsets greater than 50 km which bound five major (mega-) segments, and smaller scale structures of a variety of offset styles and amplitudes which cut four of these segments. We refer to these as ridge-axis discontinuities. The frequent opposite sense of offset identified between the first order structures and the subordinate discontinuities between these major structures is interpreted as resulting from the adjustment to new kinematic parameters after magnetic anomaly 20. As far as our data allows us to determine, the central major segment is not subdivided by minor ridge axis discontinuities, which we suggest is a result of its proximity to the Rodriguez hotspot.  相似文献   

13.
The results of the two- and three-dimensional magnetic inversions performed on data located between 20°–24° N on the Mid-Atlantic Ridge indicate the crustal magnetization has decayed exponentially for the last 10 Ma, and that this decay has been fairly symmetric about the ridge axis. After removal of the mean temporal decay, the residual field is characterized by more positive magnetizations at the second-order discontinuities, regardless of initial magnetization direction. A model that involves the preferential emplacement of serpentinized lithologies near the discontinuities is proposed to explain this correlation. The temporal detrending method also indicates that several ridge-parallel depressions located on the flanks of the ridge axis are regions of more positive magnetizations. These bathymetric depressions may mark the locations of detachment faulting that occurred during amagmatic periods of extension. The general symmetry of the crustal magnetization about the ridge axis does not support the occurrence of continuous detachment faulting proposed to correspond to the inner and outer corners of ridge axis discontinuities.  相似文献   

14.
The South Pandora and the Tripartite Ridges are active spreading centers located in the northern part of the North Fiji Basin. These spreading centers were surveyed over a distance of 750 km during the NOFI cruise of R/V L'Atalante (August–September 1994) which was conducted in the frame of the french-japanese Newstarmer cooperation project. SIMRAD EM12-dual full coverage swath bathymetric and imagery data as well as airgun 6-channel seismic, magnetics and gravity profiles were recorded along and offaxis from 170°40 E to 178° E. Dredging and piston coring were also performed along and off-axis. The axial domain of the South Pandora Ridge is divided into 5 first-order segments characterized by contrasted morphologies. The average width of the active domain is 20 km and corresponds either to bathymetric highs or to deep elongated grabens. The bathymetric highs are volcanic constructions, locally faulted and rifted, which can obstruct totally the axial valley. The grabens show the typical morphology of slow spreading axes, with two steep walls flanking a deep axial valley. Elongated lateral ridges may be present on both sides of the grabens. Numerous volcanoes, up to several kilometers in diameter, occur on both flanks of the South Pandora Ridge. The Tripartite Ridge consists of three main segments showing a sigmoid shape. Major changes in the direction of the active zones are observed at the segment discontinuities. These discontinuities show various geometrical patterns which suggest complex transform relay zones. Preliminary analysis of seismic reflection profiles suggest that the Tripartite Ridge is a very young feature which propagates into an older oceanic domain characterized by a significant sedimentary cover. By contrast, a very thin to absent sedimentary cover is observed about 100 km on both flanks of the South Pandora Ridge active axis. The magnetic anomaly profiles give evidence of long and continuous lineations, parallel to the South Pandora Ridge spreading axis. According to our preliminary interpretation, the spreading rate would have been very low (8 km/m.y. half rate) during the last 7 Ma. The South Pandora and Tripartite Ridges exhibit characteristics typical of active oceanic ridges: (1) a segmented pattern, with segments ranging from 80 to 100 km in length; (2) an axial tectonic and volcanic zone, 10 to 20 km wide; (3) well-organized magnetic lineations, parallel to the active axis; (4) clear signature on the free-air gravity anomaly map. However, no typical transform fault is observed; instead, complex relay zones are separating first-order segments.  相似文献   

15.
Large-scale detachment faults on mid-ocean ridges （MORs） provide a window into the deeper earth. They have megamullion on their corrugated surfaces, with exposed lower crustal and upper mantle rocks, rela- tively high residual Bouguer gravity anomaly and P-wave velocity, and are commonly associated with ocean- ic core complex. According to 30 detachment faults identified on MORs, we found that their distances to the axis mostly range from 5 to 50 km, half-spreading rates range from 6.8 to 17 mm/a, and activity time ranges from recent to 3 Ma. Most of the detachment faults are developed on the slow spreading Mid-Atlantic Ridge （MAR） and ultra-slow spreading Southwest Indian Ridge （SWIRl, with the dominant half-spreading rates of 7-13 mm/a, especially 10-13 mm/a. Furthermore, they mostly occur at the inside corner of one segment end and result in an asymmetric seafloor spreading. The detachment faults on MORs are mainly controlled by the tectonism and influenced by the magmatism. Long-lived detachment faults tend to be formed where the ridge magma supply is at a moderate level, although the tectonism is a first-order controlling factor. At the slow spreading ridges, detachment faults tend to occur where local magma supply is relatively low, whilst at the ultra-slow spreading ridges, they normally occur where local magma supply is relatively high. These faults are accompanied by hydrothermal activities, with their relationships being useful in the study of hydrothermal polymetallic sulfides and their origin.  相似文献   

16.
Polymetalic sulfide is the main product of sea-floor hydrothermal venting, and has become an important sea-floor mineral resources for its rich in many kinds of precious metal elements. Since 2007, a number of investigations have been carried out by the China Ocean Mineral Resources Research and Development Association(COMRA)cruises(CCCs) along the Southwest Indian Ridge(SWIR). In 2011, the COMRA signed an exploration contract of sea-floor polymetallic sulfides of 10 000 km2 on the SWIR with the International Seabed Authority. Based on the multibeam data and shipborne gravity data obtained in 2010 by the R/V Dayang Yihao during the leg 6 of CCCs21, together with the global satellite surveys, the characteristics of gravity anomalies are analyzed in the Duanqiao hydrothermal field(37°39′S, 50°24′E). The "subarea calibration" terrain-correcting method is employed to calculate the Bouguer gravity anomaly, and the ocean bottom seismometer(OBS) profile is used to constrain the two-dimensional gravity anomaly simulation. The absent Moho in a previous seismic model is also calculated.The results show that the crustal thickness varies between 3 and 10 km along the profile, and the maximum crustal thickness reaches up to 10 km in the Duanqiao hydrothermal field with an average of 7.5 km. It is by far the most thicker crust discovered along the SWIR. The calculated crust thickness at the Longqi hydrothermal field is approximately 3 km, 1 km less than that indicated by seismic models, possibly due to the outcome of an oceanic core complex(OCC).  相似文献   

17.
Total magnetic intensity and bathymetric surveys were carried out in the northern Bay of Bengal between 6° to 11° 45 N latitudes and east of 84° to 93° 30 E longitudes. The hitherto known 85° E Ridge is characterised as a subsurface feature by a large amplitude, positive magnetic anomaly surrounded by Mesozoic crust. A newly identified NE to NNESSW trending magnetic anomaly between 7° N, 87° 30 E and 10° 30 N, 89–90° E may be one of the unidentified Mesozoic lineations in the northern Bay of Bengal. The Ninetyeast Ridge is not associated with any recognizable magnetic anomaly. The Sunda Trough to the east of the Ninetyeast Ridge is characterised by a positive magnetic anomaly. A combined interpretation, using Werner deconvolution and analytical signal methods, yields basement depths ~ 10 km below sea level. These depths are in agreement with the seismic results of Curray (1991).Deceased 24 December 1991  相似文献   

18.
To decipher the distribution of mass anomalies near the earth's surface and their relation to the major tectonic elements of a spreading plate boundary, we have analyzed shipboard gravity data in the vicinity of the southern Mid-Atlantic Ridge at 31–34.5° S. The area of study covers six ridge segments, two major transforms, the Cox and Meteor, and three small offsets or discordant zones. One of these small offsets is an elongate, deep basin at 33.5° S that strikes at about 45° to the adjoining ridge axes.By subtracting from the free-air anomaly the three-dimensional (3-D) effects of the seafloor topography and Moho relief, assuming constant densities of the crust and mantle and constant crustal thickness, we generate the mantle Bouguer anomaly. The mantle Bouguer anomaly is caused by variations in crustal thickness and the temperature and density structure of the mantle. By subtracting from the mantle Bouguer anomaly the effects of the density variations due to the 3-D thermal structure predicted by a simple model of passive flow in the mantle, we calculate the residual gravity anomalies. We interpret residual gravity anomalies in terms of anomalous crustal thickness variations and/or mantle thermal structures that are not considered in the forward model. As inferred from the residual map, the deep, major fracture zone valleys and the median, rift valleys are not isostatically compensated by thin crust. Thin crust may be associated with the broad, inactive segment of the Meteor fracture zone but is not clearly detected in the narrow, active transform zone. On the other hand, the presence of high residual anomalies along the relict trace of the oblique offset at 33.5° S suggests that thin crust may have been generated at an oblique spreading center which has experienced a restricted magma supply. The two smaller offsets at 31.3° S and 32.5° S also show residual anomalies suggesting thin crust but the anomalies are less pronounced than that at the 33.5° S oblique offset. There is a distinct, circular-shaped mantle Bouguer low centered on the shallowest portion of the ridge segment at about 33° S, which may represent upwelling in the form of a mantle plume beneath this ridge, or the progressive, along-axis crustal thinning caused by a centered, localized magma supply zone. Both mantle Bouguer and residual anomalies show a distinct, local low to the west of the ridge south of the 33.5° S oblique offset and relatively high values at and to the east of this ridge segment. We interpret this pattern as an indication that the upwelling center in the mantle for this ridge is off-axis to the west of the ridge.  相似文献   

19.
Resumé Cet article présente des données bathymétriques et magnétiques de la région axiale de la dorsale sud-ouest indienne au voisinage de la zone de fracture majeure Atlantis II. Elles proviennent pricipalement de la campagne MD34 (Marion-Dufresne, 1983).L'axe de la dorsale est défini par la vallée et l'anomalie magnétique qui lui est associée. Le rilief le long de l'axe varie localement très rapidement; A l'ouest de la zone de fracture Atlantis II, le plancher axial présente deux bombements séparés par une dépression importante (4600 m). Cette étude met en évidence la corrélation entre ces hauts bathymétriques, la forme de la vallée et la l'amplitude de l'anomalie magnétique axiale: lorsque la profondeur du plancher axial diminue, la vallée se creuse et son encaissement augmente. On observe ainsi sur les hauts bathymétriques une section d'axe très encaissée, associée à une anomalie magnétique d'amplitude plus importance.L'identification de l'anomalie 5 (10 Ma) sur chaque flanc de la dorsale sud-ouest indienne permet la reconstitution de cette isochrone qui montre clairement une évolution de la géométrie de l'axe: à l'époque de l'anomalie 5, l'axe était composé de segments perpendiculaires à la direction d'expansion, décalés par des failles transformantes, alors qu'il apparait actuellement continu et formé sur les hauts topographiques de courts segments perpendiculaires à la direction d'expansion (et dans les dépressions par des sections d'axe très obliques).La carte bathymétrique met en évidence des lignes de crêtes grossièrement Nord-Sud (007°) dont la direction diffère de la direction d'expansion (357°) déduite des reconstructions, et parallèle à la zone de fracture majeure Atlantis II. Sur les dorsales lentes, les zones de fractures mineures, n'indiqueraient donc pas la véritable direction d'expansion.
The axial region of the Southwest Indian Ridge between 53° E and 59° E: Evolution during the last 10 Ma
An interpretation of bathymetric and magnetic data obtained aboard the R/V Marion Dufresne provides us with new information concerning the evolution of the Southwest Indian Ridge, in the region of the Atlantis II Fracture Zone (57° E), since 10 Ma. On all profiles, the ridge axis and the axial magnetic anomaly have been clearly recognized. Bathymetric data illustrate the rapid variation of depth along the axis. On the western side of the Atlantis II Fracture Zone, the along axis profile is characterized by a succession of two highs, and an important depression between them.Our data show a strong relationship between the regional axial depth, the steep-sidedness of the axial valley and the signature of the central magnetic anomaly. In particular, where the axis is deepest (4500 m), there is a wide, shallow axial valley which is oblique to the spreading direction, and a non-typical central magnetic anomaly signature. In contrast, where the regional axial depth is shallow (3500 m), the axial valley is deep, narrow, perpendicular to the spreading direction, and the central magnetic anomaly is high in amplitude. The ridge axis on the western side of the Atlantis II Fracture Zone appears to consist of short segments located on the axial highs, which are linked by oblique zones. On the eastern side, the ridge axis is continuous, and appears to be oblique to the spreading direction.Clearly lineated magnetic anomalies 3A (5 Ma) and 5 (10 Ma) have been identified and mapped. These magnetic data allow a reconstruction which shows an evolution of the axial geometry since 10 Ma. On the western side of the Atlantis II Fracture Zone, the axis at anomaly 5 time consisted of segments perpendicular to the spreading direction which were offset by transform faults. On the eastern side, the isochron A5 appears to be parallel to the present-day ridge axis. From this plate reconstruction, a spreading direction of 357° was deduced, and appears to be parallel to the Atlantis II Fracture Zone.On each flank of the Suuthwest Indian Ridge, our bathymetric data show elongated ridges, aligned in a north-south direction, which correlate with the axial topographic highs. This direction is not precisely parallel to the spreading direction deduced from plate reconstruction. The differences in these directions suggest that transverse relief on show spreading ridge flanks (which could be interpreted as indicating the location of minor fracture zones) may not be indicative of the seafloor spreading direction.
  相似文献   

20.
The sea floor of Fram Strait, the over 2500 m deep passage between the Arctic Ocean and the Norwegian-Greenland Sea, is part of a complex transform zone between the Knipovich mid-oceanic ridge of the Norwegian-Greenland Sea and the Nansen-Gakkel Ridge of the Arctic Ocean. Because linear magnetic anomalies formed by sea-floor spreading have not been found, the precise location of the boundary between the Eurasian and the North American plate is unknown in this region. Systematic surveying of Fram Strait with SEABEAM and high resolution seismic profiling began in 1984 and continued in 1985 and 1987, providing detailed morphology of the Fram Strait sea floor and permitting better definition of its morphotectonics. The 1984 survey presented in this paper provided a complete set of bathymetric data from the southernmost section of the Svalbard Transform, including the Molloy Fracture Zone, connecting the Knipovich Ridge to the Molloy Ridge; and the Molloy Deep, a nodal basin formed at the intersection of the Molloy Transform Fault and the Molloy Ridge. This nodal basin has a revised maximum depth of 5607 m water depth at 79°8.5N and 2°47E.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号