共查询到20条相似文献，搜索用时 781 毫秒
1.
The hydrodynamic interaction between an Autonomous Underwater Vehicle (AUV) manoeuvring in close proximity to a larger underwater vehicle can cause rapid changes in the motion of the AUV. This interaction can lead to mission failure and possible vehicle collision. Being self-piloted and comparatively small, an AUV is more susceptible to these interaction effects than the larger body. In an aim to predict the manoeuvring performance of an AUV under the effects of the interaction, the Australian Maritime College (AMC) has conducted a series of computer simulations and captive model experiments. A numerical model was developed to simulate pure sway motion of an AUV at different lateral and longitudinal positions relative to a larger underwater vehicle using Computational Fluid Dynamics (CFDs). The variables investigated include the surge force, sway force and the yaw moment coefficients acting on the AUV due to interaction effects, which were in turn validated against experimental results. A simplified method is presented to obtain the hydrodynamic coefficients of an AUV when operating close to a larger underwater body by transforming the single body hydrodynamic coefficients of the AUV using the steady-state interaction forces. This method is considerably less time consuming than traditional methods. Furthermore, the inverse of this method (i.e. to obtain the steady state interaction force) is also presented to obtain the steady-state interaction force at multiple lateral separations efficiently. Both the CFD model and the simplified methods have been validated against the experimental data and are capable of providing adequate interaction predictions. Such methods are critical for accurate prediction of vehicle performance under varying conditions present in real life. 相似文献
2.
A discrete time-delay control (DTDC) law for a general six degrees of freedom unsymmetric autonomous underwater vehicle (AUV) is presented. Hydrodynamic parameters like added mass coefficients and drag coefficients, which are generally uncertain, are not required by the controller. This control law cancels the uncertainties in the AUV dynamics by direct estimation of the uncertainties using time-delay estimation technique. The discrete-time version of the time-delay control does not require the derivative of the system state to be measured or estimated, which is required by the continuous-time version of the controller. This particularly provides an advantage over continuous-time controller in terms of computational effort or availability of sensors for measuring state derivatives, i.e., linear and angular accelerations. Implementation issues for practical realization of the controller are discussed. Experiments on a test-bed AUV were conducted in depth, pitch, and yaw degrees of freedom. Results show that the proposed control law performs well in the presence of uncertainties. 相似文献
3.
In this paper, the hydrodynamic characteristic of a synthetic jet steered underwater vehicle is studied. The steering motion studied is the lateral motion and the yaw motion. The lateral motion is induced through the in-phase work of this two actuators and the yaw motion is realized through the out-of-phase work. The vehicle studied is REMUS AUV with synthetic jet actuator mounted inside. The hydrodynamic characteristic of the vehicle under different cruising speed is studied. The driving parameters of the SJ actuator keep invariant in different cases. When the two actuators work in phase, the average steering force is smaller than the thrust of the isolated actuator and keeps nearly invariant under different cruising speed. When the two actuators work out of phase, the average steering moment also keeps invariant with cruising speed. The mathematical model of the additional drag of the vehicle, the thrust of the actuator, the steering force as well as the steering moment is given. The velocity distribution is also given to assistant the analysis in this paper. From the analysis given it can be known the steering method based on SJ is realized through position control other than velocity control. 相似文献
4.
Maneuvering modeling and simulation of AUV dynamic systems with Euler-Rodriguez quaternion method 总被引：1，自引：0，他引：1
The purpose of this study is to develop maneuvering models and systems of a simulator to improve the motion performance of autonomous underwater vehicles (AUVs) at the preliminary design stages in advance. The AUVs simulation systems based on the standard submarine equations of motion in six-degree-of-freedom (6-DOF) integrated with the Euler-Rodriguez quaternion method for representing singularity-free AUV attitude and time-saving calculation, and with a nonlinear control model for maneuvering and depth control simulations, time-marching in the fourth-order Runge-Kutta scheme. For validation of the simulation codes, results of the ISiMI AUV open-loop tests including turning test and zigzag test as well as an AUV simulator on the basis of Euler-angle method were used to compare with the quaternion-based AUV simulator. The computational results from the proposed simulator agree well with those from both the ISiMI AUV experiments and the Euler-angle based simulations. Additionally, a new maneuvering procedure, namely "put-out" was implemented to test directional stability for a large-scale AUV in the proposed AUV simulator that can be considered for vehicles in space as well as in constrained planes. 相似文献
5.
6.
This paper describes a controlled self-motion study recently carried out using a small autonomous underwater vehicle (AUV) in a controlled environment in which regular and random waves can be generated accurately for various frequencies and heights. In this study, the AUV was one of the Florida Atlantic University's Ocean Explorer series vehicles, and the controlled environment was chosen to be the Maneuvering And Sea-Keeping (MASK) facilities located at the David Taylor Model Basin. During the entire study, 29 sets of experimental motion and wave data were collected under various wave frequencies and heights, vehicle alignment, and operating depths. Due to the wave tank constraint, the vehicle speed was restricted to be less than 1.5 m/s and the wave frequency higher than 0.3 Hz without significantly affecting the self-motion analysis. Time history and power spectral density results suggest that the roll-induced pitching response was considerably larger for the wave frequencies tested, as compared to the pitch-induced rolling response. Standard deviation results reveal that the existing OEX is capable of producing approximately 3° (peak-to-peak) pitch, 0.7° (peak-to-peak) roll, and 0.6° (peak-to-peak) yaw at 2-m depth in the head-sea condition when the encountering wave frequency is close to 0.4 Hz. However, at 1.5-m vehicle depth, significant surges were observed in pitching and rolling motion, suggesting that the OEX is currently unsuitable to maintain accurate depth-following within this range at sea-state 2 or higher. It is hoped that the results presented can provide better insights into how a small AUV with a nonideal body shape reacts to waves of different sea states, and how vehicle self-motion can be streamlined by choosing proper vehicle speed, heading, and depth, given that the wave characteristics are available 相似文献
7.
Seung-Keon Lee 《Ocean Engineering》2000,27(1)
The traditional governing equations for sway–yaw maneuvering motion are a set of ordinary differential equations with constant coefficients. But, as is well known, integro–differential equations with impulse response functions are more strict governing equations that can handle the frequency dependence of hydrodynamic forces.In this paper, the two types of equation are compared and used to calculate the 10°–10° zig-zag maneuver in waves. Differences between the solutions are discussed. 相似文献
8.
Robust control based on feedback linearization for roll stabilizing of autonomous underwater vehicle under wave disturbances 总被引：1，自引：0，他引：1
In the case of Autonomous Underwater Vehicle(AUV) navigating with low speed near water surface,a new method for design of roll motion controller is proposed in order to restrain wave disturbance effectively and improve roll stabilizing performance.Robust control is applied,which is based on uncertain nonlinear horizontal motion model of AUV and the principle of zero speed fin stabilizer.Feedback linearization approach is used to transform the complex nonlinear system into a comparatively simple linear system.For parameter uncertainty of motion model,the controller is designed with mixed-sensitivity method based on H-infinity robust control theory.Simulation results show better robustness improved by this control method for roll stabilizing of AUV navigating near water surface. 相似文献
9.
The problem of controlling an autonomous underwater vehicle (AUV) in a diving maneuver is addressed. Having a simple controller which performs satisfactorily in the presence of dynamical uncertainties calls for a design using the sliding mode approach, based on a dominant linear model and bounds on the nonlinear perturbations of the dynamics. Nonadaptive and adaptive techniques are considered, leading to the design of robust controllers that can adjust to changing dynamics and operating conditions. The problem of using the observed state in the control design is addressed, leading to a sliding mode control system based on input-output signals in terms of drive-phase command and depth measurement. Numerical simulations using a full set of nonlinear equations of motion show the effectiveness of the proposed techniques 相似文献
10.
Model simplification for AUV pitch-axis control design 总被引：1，自引：0，他引：1
Although the use of low-order equivalent models is common and extensively studied for control of aircraft systems, similar analysis has not been performed for submersible systems. Toward an improved understanding of the utility of low-order equivalent models for submersible systems, we examine control design for pitch-axis motion of an autonomous underwater vehicle (AUV). Derived from first principles, the pitch-axis motion of a streamlined AUV is described by third-order dynamics. However, second-order approximate models are common for system identification and control design. In this work, we provide theoretical justification for both the use of and limitations of a second-order model, and we verify our results in practice via a series of case studies. We conclude that a second-order pitch-axis model should often be sufficient for system identification and control design. 相似文献
11.
The stability of the motion control system is one of the decisive factors of the control quality for Autonomous Underwater Vehicle (AUV).The divergence of control,which the unstable system may be brought about,is fatal to the operation of AUV.The stability analysis of the PD and S-surface speed controllers based on the Lyapunov' s direct method is proposed in this paper.After decoupling the six degree-of-freedom (DOF) motions of the AUV,the axial dynamic behavior is discussed and the condition is deduced,in which the parameters selection within stability domain can guarantee the system asymptotically stable.The experimental results in a tank and on the sea have successfully verified the algorithm reliability,which can be served as a good reference for analyzing other AUV nonlinear control systems. 相似文献
12.
针对自治水下机器人(Autonomous underwater vehicle,AUV)推力器布置和控制仿真的困难性及以往电机仿真难以进行的缺点,提出1种进行多推力器运动仿真的方法,该方法建立的模型克服了推力器推力控制系统不能与电机结合的问题,能较好地反映推力器布置和电机的响应情况,可为AUV的运动控制、布置设计及控制系统开发等提供验证模型.针对流线型AUV CRanger-2的推力器布置情况,在对其建立推力器模型的基础上,利用模型对设定推力下的推力器控制进行仿真.仿真结果表明:该方法能够有效地模拟推力器布置既定情况下的电机运动与推力控制,可为水下机器人控制策略优化提供仿真平台. 相似文献
13.
Pan-Mook Lee Seok-Won Hong Yong-Kon Lim Chong-Moo Lee Bong-Hwan Jeon Jong-Won Park 《Oceanic Engineering, IEEE Journal of》1999,24(3):388-395
This paper presents a discrete-time quasi-sliding mode controller for an autonomous underwater vehicle (AUV) in the presence of parameter uncertainties and a long sampling interval. The AUV, named VORAM, is used as a model for the verification of the proposed control algorithm. Simulations of depth control and contouring control are performed for a numerical model of the AUV with full nonlinear equations of motion to verify the effectiveness of the proposed control schemes when the vehicle has a long sampling interval. By using the discrete-time quasi-sliding mode control law, experiments on depth control of the AUV are performed in a towing tank. The controller makes the system stable in the presence of system uncertainties and even external disturbances without any observer nor any predictor producing high rate estimates of vehicle states. As the sampling interval becomes large, the effectiveness of the proposed control law is more prominent when compared with the conventional sliding mode controller 相似文献
14.
O. SaoutP. Ananthakrishnan 《Applied Ocean Research》2011,33(2):158-167
A theoretical methodology to determine the open-loop directional stability of a near-surface underwater vehicle is presented. It involves a solution of coupled sway and yaw equations of motion in a manner similar to that carried out for surface ships. The stability derivatives are obtained numerically through simulation of motions corresponding to planar motion mechanism (PMM) model tests. For the numerical simulation, a boundary-integral method based on the mixed Lagrangian-Eulerian formulation is developed. The free-surface effect on the vehicle stability is determined by comparing the results with that obtained for vehicle motion in infinite fluid. The methodology was used to determine the stability of the Florida Atlantic University’s Ocean EXplorer (OEX) AUV. The presence of the free surface, through radiation damping, is found to suppress unsteady oscillations and thereby enhance the directional stability of the vehicle. With effects of free surface, forward speed, location and geometry of rudders, location of the center of gravity etc. all being significant factors affecting stability, a general conclusion cannot be drawn on their combined effect on the vehicle stability. The present computational methodology is therefore a useful tool to determine an underwater vehicle’s stability for a given configuration and thus the viability of an intended mission a priori. 相似文献
15.
In this paper, a novel model reference adaptive controller with anti-windup compensator (MRAC_AW) is proposed for an autonomous underwater vehicle (AUV). Input saturations and parametric uncertainties are among the practical problems in the control of autonomous vehicles. Hence, utilizing a proper adaptive controller with the ability to handle actuator saturations is of a particular value. The proposed technique of this paper incorporates the well-posed model reference adaptive control with integral state feedback and a modern anti-windup scheme to present an appropriate performance in practical conditions of an AUV. Stability of the proposed method is analyzed by Lyapunov theory. Then, the proposed controller is implemented in the hardware in the loop simulation of AUV. For this purpose, the introduced method is implemented in an onboard computer to be checked in a real-time dynamic simulation environment. Obtained results in the presence of real hardware of system, actuators, computational delays and real-time execution verify the effectiveness of proposed scheme. 相似文献
16.
《Oceanic Engineering, IEEE Journal of》2008,33(2):69-88
17.
针对适合捷联式重力仪的AUV搭载平台的选型问题,基于国内AUV实际航行数据,分析了多推进器组合、推进器和浮力舱组合、推进器和鳍舵组合等3类AUV的定深航行运动特性;推导了AUV水下航行在3个坐标轴方向上对重力仪产生的运动加速度计算公式,得到运动加速度与AUV水下6个自由度运动要素的解析表达式;基于运动加速度分析,讨论了适用于水下移动重力测量的AUV平台和推进装置设计,进行了AUV搭载平台的优选,并给出了重力仪安装位置建议;选定的AUV实验平台实施移动重力测量验证试验重复线精度达到0.42mGal,验证了搭载平台优选的有效性。 相似文献
18.
Jan Petrich 《Ocean Engineering》2011,38(1):197-204
Attitude control systems for autonomous underwater vehicles are often implemented with separate controllers for pitch motion in the vertical plane and yaw motion in the horizontal plane. We propose a novel time-varying model for a streamlined autonomous underwater vehicle that explicitly displays the coupling between yaw and pitch motion due to nonzero roll angle and/or roll rate. The model facilitates the use of a multi-input multi-output H∞ control design that is robust to yaw-pitch coupling. The efficacy of our approach is demonstrated with field trials. 相似文献
19.
Maintaining a fixed position near the sea floor is a critical capability during the deployment of remotely operated or intelligent (autonomous) undersea vehicles in a variety of missions, including inspection and repair of undersea structures, data collection, and surveillance. We present an automatic optical station-keeping system for application to submersible vehicles in deep waters by exploiting the information in sea floor images. Readily measurable spatio-temporal image gradients are used to detect and compute the vehicle's translational and yaw motions using a direct motion vision technique. The vision system has been implemented on a Windows-NT Pentium platform, and the estimated positions and yaw angles are communicated via a serial link to the control system, running on a PC-386. Accurate station-keeping is demonstrated in experiments with a three-thruster floating vehicle in a 6-ft×12-ft×6-ft water tank 相似文献
20.
A randomized kinodynamic path planning algorithm based on the incremental sampling-based method is proposed here as the state-of-the-art in this field applicable in an autonomous underwater vehicle. Designing a feasible path for this vehicle from an initial position and velocity to a target position and velocity in three-dimensional spaces by considering the kinematic constraints such as obstacles avoidance and dynamic constraints such as hard bounds and non-holonomic characteristic of AUV are the main motivation of this research. For this purpose, a closed-loop rapidly-exploring random tree (CL-RRT) algorithm is presented. This CL-RRT consists of three tightly coupled components: a RRT algorithm, three fuzzy proportional-derivative controllers for heading and diving control and a six degree-of-freedom nonlinear AUV model. The branches of CL-RRT are expanded in the configuration space by considering the kinodynamic constraints of AUV. The feasibility of each branch and random offspring vertex in the CL-RRT is checked against the mentioned constraints of AUV. Next, if the planned branch is feasible by the AUV, then the control signals and related vertex are recorded through the path planner to design the final path. This proposed algorithm is implemented on a single board computer (SBC) through the xPC Target and then four test-cases are designed in 3D space. The results of the processor-in-the-loop tests are compared by the conventional RRT and indicate that the proposed CL-RRT not only in a rapid manner plans an initial path, but also the planned path is feasible by the AUV. 相似文献