共查询到20条相似文献，搜索用时 31 毫秒
1.
Liquefaction characteristics of silts 总被引：1，自引：0，他引：1
S. Singh 《Geotechnical and Geological Engineering》1996,14(1):1-19
Summary The paper presents a summary of the results of cyclical triaxial load testing of samples of silt and silty sands. The paper emphasizes differences in behaviour observed between reconstituted triaxial samples of clean sand, of sand containing 10, 20, 30 and 60% silt, pure silt, and undisturbed samples of silt and silty sand. An important observation is that the mechanisms of deformation for sit are different for reconstituted and undisturbed samples, the undisturbed sample having a specific geological structure which seems to slow down the excess pore water pressure accumulation, but which still results in cyclic deformations regularly increasing from the very beginning of the test and rapidly reaching high levels. The other important observation is that fine-grained noncohesive soils such as silts and silty sands can be as, or even more, susceptible to liquefaction as clean sands. Test results on samples of sand containing 10, 20 or 30% of silt indicate lesser resistance to liquefaction than pure sand samples. The paper shows the difficulty in identifying a representative parameter to compare the behaviour of silts and silty sands with pure sand, and it seems that more research will be needed in this area. 相似文献
2.
Silt is available in many parts of the world in combination with sands and clays. However, due to lack of clear understanding of its engineering behaviour, most of the time it is interpreted in terms of either sands or clays. Structures that are usually built on silty soils are designed to take into account design procedures developed for sandy or clayey soils. Presence of silts in combination with varying amount of sand and clays produces silt that is either plastic or non-plastic in nature. Silt is available in and around the Delhi region, in a majority mixture along with fine sands, which is non-plastic in nature. On the other hand silty deposits found in offshore Bombay High region are found in abundance along with significant amounts of clays and are termed as plastic silts. In this paper a comparison of the stress-strain behaviour of plastic and non-plastic silts is carried out under triaxial compression loading during both drained and undrained conditions. Two representative samples each from Delhi and Bombay High regions were considered for this comparison and results of stress-strain under four sets of confining pressure are discussed in detail. It is observed from this study that behaviour of silts is mainly dependent on the composition and structure of the resultant soil matrix. It is concluded from the results that shear strength parameters as well as volume change/pore pressure response of silty soils is dominated by the constituent soil present along with the silt. It is seen from the comparative behaviour of non-plastic and plastic silts that the presence of sand and clays has a governing effect on pore pressure development and the resultant friction angle. The study also corroborated that the nature of silt is transitional both in the case of plastic and non-plastic forms. 相似文献
3.
A multivariate statistical strategy employing cluster analysis, discriminant analysis, and ordination was used to classify and interpret depositional environments of Barataria Bay, Louisiana, from grain-size data tabulated by Krumbein and Aberdeen (1937). Weight-percent whole-phi variables for 69 samples were tested for redundancy using R-mode cluster analysis. These samples were partitioned into five environmentally significant facies using Q-mode cluster analysis: (1) beach-ridge sand; (2) shallow wave-zone sand; (3) channel sand and silty sand; (4) channel-margin silty sand; and (5) low-energy sandy silt and clayey silt. Then the classification was extended with discriminant analysis to the remaining 29 samples which exhibited incipient flocculation and whose constituents did not total unity. Environments of deposition were associated with each facies following the method of Visher (1969) and using gradient analysis on a two-dimensional Q-mode ordination. Wilk's lambda and discriminant analysis tested the statistical significance of these facies; they were further tested by comparing their distribution with field relations and known environmental processes. 相似文献
4.
This paper describes recent proglacial lacustrine sediments exposed by the drainage of a small (probably never more than 0·03 km2) ice-dammed lake basin at Leirbreen, central Jotunheimen, Norway. The dominant facies include ripple-laminated, massive and horizontally-stratified sands, massive and horizontally-laminated silts, and irregularly-laminated fine sands and silts. The major control on lake circulation and the nature and distribution of these facies was an underflow driven by a subglacial meltwater stream which formed the major lake input. Although much of the sedimentary sequence indicates a pulsatory input, the proximal character of this small lake prevented the development of classic varved silts. Compressional deformation of shoreline sediments was due to winter lake ice push. Other deformational processes included the grounding of icebergs, water escape and syn-sedimentary downslope collapse. Observations from an adjacent small ice-marginal lake at Leirbreen provide support for several of the inferences drawn from the sediments of the former ice-dammed lake. 相似文献
5.
Loose saturated cohesionless soils are most susceptible to liquefaction, however there are strong historical evidence suggesting that soils containing fines such as silty sands are also prone to liquefaction during earthquakes. The liquefaction of silty sands has been observed in a number of recent case studies. This paper presents the effects of fine silts on liquefaction potential of sandy soil. Tests have been conducted on the vibration table at different accelerations and pore water pressure is measured. During the lab investigation, locally (Roorkee, India) available Solani Sand and Dhanauri Silt have been used. The soil samples have been prepared by varying silt content and the initial relative density. The results of the study performed are used to clarify the effects of non-plastic fines content on the Solani sand. As the silt content increases, the number of cycles required to produce maximum pore water pressure increases. For a particular level of excitation, rate of pore water pressure generation is maximum at critical silt content. It is observed that critical silt content to generate maximum pore water pressure is different for different accelerations. Further, effect of silt content is very much dependent on relative density. 相似文献
6.
Richard W. Faas 《Sedimentary Geology》1973,10(3):205-213
Bottom sediments from two areas of the York River Estuary of southeastern Virginia were systematically sampled to depths of 40 cm and analyzed for their mass properties, i.e., water content, unit weight, and shearing strength. The samples fell into: (1) a coarse-grained group of clayey sands, silty sands, and sand—silt—clays; and (2) a fine-grained group of silty clays and clayey silts. Analysis of variance between both groups revealed distinct differences in the mass properties. Means, variances, and coefficients of variation for each parameter were determined and made possible a statistical characterization of each sediment type.The data presented may be used to predict expectable values of mass properties for similar sediments, having experienced similar depositional histories, e.g., from neighboring estuaries and Chesapeake Bay. 相似文献
7.
Quaternary desert loess and sandstone-loessite relationships in the geological record raise questions regarding causes and mechanisms of silt formation and accretion. In the northern Sinai-Negev desert carbonate terrain, only sand abrasion in active erg could have produced the large quantities of quartzo-feldspathic silts constituting the late Quaternary northwestern Negev loess. In the continuum of source (medium to fine sand of dunes) to sink (silts in loess) the very fine sand is unaccounted for in the record. This weakens the sand abrasion model of silt formation as a global process. Here, we demonstrate that, as predicted by experiments, abrasion by advancing dunes generated large quantities of very fine sand (60-110 μm) deposited within the dune field and in close proximity downwind. This very fine sand was generated 13-11 ka, possibly synchronous with the Younger Dryas under gusty sand/dust storms in the southeastern Mediterranean and specifically in the northern Sinai-Negev erg. These very fine sands were washed down slope and filled small basins blocked by the advancing dunes; outside these sampling basins it is difficult to identify these sands as a distinct product. We conclude that ergs are mega-grinders of sand into very fine sand and silt under windy Quaternary and ancient aeolian desert environments. 相似文献
8.
Allen W. Archer 《Mathematical Geology》1994,26(1):47-65
Fine-scale fabric within shales can be used to interpret environments of deposition. In particular, systematic variations in lamina thicknesses can be used to suggest the presence or absence of specific sedimentological controlling factors, such as tides. Herein, shale fabric is analyzed from Carboniferous coal-bearing and siliciclastic-rich formations in Indiana and Kansas. The shales exhibit well developed, normally graded lamina. Sediment grain sizes range from silt and sand at the base of the lamina up to silt and clay at the top. Computer-based optical scanning of prepared shale samples was undertaken so that the lamina thicknesses could be extracted automatically and then used for thickness-series analysis. The sands and silts tend to be very light in color because they consist of well sorted, quartz-rich sands. Conversely, the silt and clay that cap the laminae tend to be dark because of the small grain size; such fine-grained layers also contain large amounts of macerated and coalified plant material. Grain size and sedimentological differences within the laminae can be detected by optical properties and this facilitates automated image processing. Extraction of laminae thicknesses and harmonic analyses of laminae-thickness series can then be used to test the reasonability of specific environmental processes, such as tidal forcing, that were operative during the formation of these shales. 相似文献
9.
A temporary section in the Cuisian Bagshot Beds, which has been mapped in detail, displayed estuarine sediments with interlayered sands and muds, fine sands, channel-fill sands and intraformational (mainly mud clast) conglomerates. The facies show rapid lateral and vertical changes in grain size and bed form and a restricted suite of trace fossils including Ophiomorpha nodosa and Arenicolites sp. The sequence is shown to have been deposited in a subtidal channel where tidal, wave and fluvial processes were dominant at different times. The following points are considered to be characteristic of sedimentation in this environment: (i) correlation is difficult and facies predictability is low; (ii) there are frequent lateral facies changes from the channel to the subtidal bank environment; (iii) pene-contemporaneous erosion removes considerable amounts of sediment; (iv) load structures may be exposed, eroded, buried and reactivated; and (v) muddy layers and bioturbated horizons offer similar resistance to penecontemporaneous erosion. 相似文献
10.
The distribution of macroinfauna was quantified in subtidal, soft-bottom habitats, extending from the estuarine mouth to the tidal head of the Gamtoos—a small, shallow, temperate estuary situated on the south coast of South Africa. Sampling covered the full salinity gradient from fresh to marine waters, and all sediment types from marine sands to fluvial silts. A total of 35 taxa was recorded, of which 22 occurred throughout the year. Species richness and diversity declined from the seawater-dominated mouth region toward the fresh water section at the tidal head of the estuary. Sediment type generally bore no clear relation to biotic diversity. A marked drop in salinity between winter and summer sample series (Δ 0.2‰ to 24‰) coincided with a reduction of mean macrofaunal density by 70%, a more seaward relocation, and a compression of axial ranges of most taxa. Numerical classification and ordination of faunistically similar regions and of co-occurring species delineated four habitat zones along the longitudinal axis of the estuary which harbour four distinct macrofaunal assemblages: 1) A tidal inlet area with salinities close to seawater; clean, coarse, marine sands, rich in CaCO3 harbour a stenohaline fauna normally found on adjacent, marine sandy beaches. 2) In the lower reaches, where fine, fluvial silts of high organic content prevail, euryhaline polychaetes dominate the macrozoobenthic community; bottom salinities in this zone seldom dropped below 25‰ 3) The middle reaches, characterized by oligohaline- to polyhaline waters, stretch over sandy sediments of intermediate carbonate, silt, and organic fractions; the fauna comprises typical estuarine forms, which occurred throughout most of the estuary except at its seaward and landward limits. 4) The upper reaches encompass the limnetic waters near the tidal head of the estuary with sediments in this zone being composed mostly of coarse, clean sands, low in CaCO3; the macrobenthos in this region is dominated by taxa of freshwater origin, which generally do not penetrate seaward beyond the oligohaline waters, and by exceptionally euryhaline estuarine species. Salinity appears as the main factor in controlling faunal assemblages at both extremes of the estuarine gradient (i.e., tidal inlet and head), whereas sediment type delineates between communities in the mesohaline to polyhaline reaches. Axial (i.e., from tidal inlet to tidal head of the estuary) zonation patterns of macroinfauna broadly matched those of mesozooplankton and fishes, supporting the notion of a general structure underlying species distribution patterns in the Gamtoos estuary. 相似文献
11.
Soft-sediment clasts composed of silt and clay are contained within glacial outwash sands in the Puget Sound, Washington State, USA. The outwash was deposited during ice retreat of the Cordilleran ice sheet around 17 cal kyr BP. The soft-sediment clasts have a distinctive and consistent morphology and disposition within the sand beds. The sedimentology, sedimentary structures and presence of soft-sediment clasts suggest sand was deposited as proglacial outwash with silts and clays deposited in meltwater pools. Following drying-out of the pools and subaerial cracking, lumps of silt and clay were excavated by meltwater and transported distally as soft-sediment clasts within high-density flows. The most likely final depositional setting is as a Salisbury-type ‘delta’ in which subaqueous outwash grades distally into deeper water. This interpretation shows the power of soft-sediment clasts to inform on past processes and palaeogeography for which there is often little evidence in the geologic record. 相似文献
12.
山西应县护驾岗冲沟阶地地层形成于66.46～33.62 ka,根据该剖面地层的粒度分布特征对该地区冲沟阶地的沉积环境进行了探讨。护驾岗冲沟阶地剖面的粒度分布特征显示:(1)剖面地层总体表现为自下而上由粗到细的正韵律沉积特征,结合野外观察将其分为4段(A—D段);(2)A段粒度分布特征变化不大,均以细砂为主,频率曲线为不对称单峰,概率累积曲线为2段式,以跃移搬运为主,分选相对较好,水动力较强,沉积环境稳定;(3)B—C段粒度分布特征变化较大,以粉砂和细砂为主,频率曲线为不对称双峰,概率累积曲线为2段式,以跃移搬运为主,分选较差,水动力较强,沉积环境不稳定;(4)D段粒度分布特征变化不大,以粉砂为主,频率曲线为不对称单峰,概率累积曲线为2段式,以悬移搬运为主,分选相对较好,水动力较弱,沉积环境稳定。总体来说,冲沟阶地形成于河流沉积环境,顶部为河漫滩沉积环境。粒度分布特征与古里雅冰芯氧同位素变化基本一致,因此护驾岗冲沟阶地粒度特征与沉积环境的变化归因于气候变化。 相似文献
13.
D. E. Leaman B. P. Kohn P. B. O'Sullivan A. J. W. Gleadow R. W. Brown K. Gallagher 《Australian Journal of Earth Sciences》2013,60(4):645-650
Ellis Fjord is a small, fjord‐like marine embayment in the Vestfold Hills, eastern Antarctica. Modern sediment input is dominated by a biogenic diatom rain, although aeolian, fluvial, ice‐rafted, slumped and tidal sediments also make a minor contribution. In areas where bioturbation is significant relict glaciogenic sediments are reworked into the fine‐grained diatomaceous sediments to produce poorly sorted fine sands and silts. Where the bottom waters are anoxic, sediments remain unbioturbated and have a high biogenic silica component. Three depositional and non‐depositional facies can be recognised in the fjord: an area of non‐deposition around the shoreline; a relict morainal facies in areas of low sedimentation and high bioturbation; and a basinal facies in the deeper areas of the fjord. 相似文献
14.
Edward Derbyshire Armelle Billard Brigitte Van Vliet-Lanoë Jean-Pierre Lautridou Mauro Cremaschi Cnr 《第四纪科学杂志》1988,3(2):147-169
In 1985, a programme of research on the sedimentology and diagenesis of the loess and loessic silts of western Europe was initiated jointly by laboratories in Leicester, Meudon, Caen, Milan, Cardiff and Southampton, involving a limited amount of comparative work on the loess from types sites in the Loess Plateau of central China. Preliminary results include the following: (1) Experimental procedures in particle size analysis, clay sample preparation and microscopy have been standardised in all cooperating groups; distinctive fabrics indicative of depositional mechanisms have been recognised. (2) Comparison of aeolian, colluvial and alluvial silt by laser-scanning and bulk magnetic susceptibility anisotropy methods appears to differentiate aeolian silt from loessic silts re-deposited by slope processes and flowing water. (3) The variability in the anisotropy of the limon à doublet facies has been assessed by image analysis of scanning electron microscopy (SEM) and optical microscopy. Strong anisotropy has also been measured in thin section imagery of loess from Normandy and Poland as the product of freezing and thawing. This is confirmed by scanning electron microscopy and by experimental freezing of some silts. (4) The clay fabric and mineralogy in western European loess differ from those in Chinese loess, especially in the case of semi-arid deposits. (5) Distribution of CaCO3, using thin sections and SEM analysis, has been determined for loess from Normandy and the Rhǒne valley in France and for some Chinese loess, At Saint Vallier, zones of CaCO3 concentration occur masking much of the original (loess) sedimentary skeleton which is a locally reworked loessic silt with some laminations. Despite considerable scatter, the palaeomagnetic results indicate a reversed polarity throughout, placing the whole Saint Vallier sequence in the Matuyama chron. These preliminary results suggest the existence of two different palaeoenvironments: one typified by central China, with arid glacials and humid interglacials; and the other represented by western Europe, with generally high humidities. There was stronger weathering and soil development and fewer freezing effects on the lossic succession in northern Italy than in western littoral Europe. 相似文献
15.
A compiled database of shear wave velocity measurements in a variety of clays, silts and sands shows directional hierarchies between downhole (VsVH), standard crosshole (VsHV), and rotary crosshole (VsHH) tests. The special in situ database has been collected from 33 well-documented geotechnical test sites. Expressions relating the small-strain shear modulus in terms of effective confining stress level, stress history and void ratio are explored for each of these three modes of directional shear wave velocity. The relationships are separated initially into soil groups (intact clays, fissured clays, sands and silts), and then generalised to consider all soil types together. 相似文献
16.
The organic matter of recent deltaic sediments cored in the Mahakam delta, East Kalimantan, has been studied before and after physical fractionation into sands >50 μm, silts 5–50 μm and clays <5 μm. Both the lipid and non-lipid components have been investigated.Weight, carbon and nitrogen fractionation budgets were used to define three types of samples, depending on coarse particle contributions to the total amount of organic matter: a = a first type with more than 50% of the O.M. in the coarse particles, high C/N ratios and O.M. content, b = an intermediary type with medium C/N ratios and O.M. content, each fraction having quite the same O.M. content, c = a third type with less than 5% of the whole O.M. in the sands and the lowest C/N ratios and O.M. content.Concerning the global organic characteristics of the fractions, a systematic increase of C/N ratios occurs when going from clays to sands; the finer the fraction is, the more nitrogenous the compounds are. This enrichment in nitrogen is related to a persistent high rate of hydrolysable material either for argillaceous organic matter-poor sediments or for the clay fractions of all types of samples. Conversely, the type (a) coarse sediments, in particular the sandy components were resistant to acid hydrolysis with burial.Concerning the geochemical markers signatures of granulometric fractions, the distribution patterns of n-alkanes and n-fatty acids are characterized by the predominance of high molecular weight compounds >C22. Carbon preference index (CPI) values are higher in the sands and silts, reflecting their enrichment in continentally-derived vegetation debris. For type (c), the fractionation revealed markers of microbial activity within the clay fractions. For all types of samples, we observed an increase with burial of the n-alkane and n-fatty acid concentrations, particularly in the clay fractions, suggesting possibly a better preservation and/or affinity of lipids with the finest fractions. 相似文献
17.
《Sedimentary Geology》2007,193(1-4):167-192
The coarse-grained, ice-contact, Porta Subaqueous Fan/Delta Complex was deposited in glacial Lake Rinteln at the margin of the Saalian ice sheet that advanced south of the Weser Chains, NW Germany. The ice-proximal depositional system was up to 15 km long and 10 km wide. The present study deals with ice-proximal subaqueous fan deposits, which are interpreted as products of a subcritical plane-wall outflow jet that periodically passed into a supercritical jet with hydraulic jump. The proximal facies assemblage consists of the coarse, clast-supported gravelly deposits of a hyperconcentrated (high-density) effluent and of related cohesionless debris flows attributed to the conduit or immediate proximal jet outflow zone of flow establishment. The intermediate facies assemblage, attributed to the outflow jet proximal zone of flow transition, is dominated by normally graded and cross-stratified gravels with scour structures at their bases; these gravels were deposited by a high-density effluent capable of forming mouthbar-like features. These deposits pass downcurrent into an assemblage of planar parallel-stratified and planar and trough cross-stratified sands and pebbly sands (partially interpreted as antidunes), with abundant scour structures and intercalated layers of fine sand/silt and silty mud, attributed to the jet distal zone of flow transition. The distal facies assemblage consists of trough cross-stratified sands and pebbly sands, and is attributed to the outflow jet proximal zone of established flow. The sedimentary succession as a whole has wedge-shape geometry, with a gentle fan-shaped inclination of the bedding from the southeast to the southwest. Repeated vertical alternations of supercritical and subcritical deposits and muddy interlayers can be attributed to temporary fluctuations in the meltwater outflow, whereas the overall upward fining of the succession indicates a net decline of meltwater discharges. 相似文献
18.
湛江市区工程建设持力层选择是第四系土层,为海相及海陆交互相沉积。近海地段以淤泥、淤泥质土、粘土、粉质粘土与砂层呈互层状分布为主;远离海滨地带以海陆交互相沉积层为主,岩土以粘性土及中粗砂为主。 相似文献
19.
钱塘江冲海积粉土剪胀性三轴试验研究 总被引：1，自引：0，他引：1
钱塘江两岸广泛分布着冲海积粉土.通过大量的三轴固结不排水CU和固结排水CD试验,探讨饱和粉土的应力应变性状和剪胀特性。试验表明,钱塘江冲海积粉土显著的特性之一是在剪切中膨胀,剪胀主要与粉土的密度和围压有关。CU试验中密(e=0.739～0.866)的原状样在围压600kPa范围内剪切膨胀,稍密(e=0.890～0.906)的击实样在围压低于400kPa剪切膨胀。由于粉土膨胀的本质不排水强度在剪切中保持增加,对于这种情况就没有惟一的"不排水强度";CD试验稍密(e=0.889～0.945)的击实样在围压低于400kPa时剪切膨胀。钱塘江冲海积粉土的剪切破坏要经历一个大的变形过程,固结排水剪切过程的应力应变性状可分为4个阶段。取应变继续而没有进一步体积变化的临界状态做破坏标准,确定粉土排水剪切强度指标较合理。 相似文献
20.
罗布泊全新世沉积特征及其环境意义 总被引：1，自引：0，他引：1
罗布泊西湖属开阔湖盆,上世纪30年代其面积达1900km2,但湖心剖面粒度分析的结果表明,其粒度组成与一般开阔湖盆有着显著的不同:沉积物常具黄色与灰色互层结构,层理清晰,黄色层的粒度组成中常含较多粗颗粒砂,灰与黄色层的混合样是以粉砂黏土为主,同时含有一定量的中、细砂,甚至粗砂。根据与风成砂和尘暴沉积的粒度组成对比,可知这种沉积特征与现代尘暴沉积有很大的相似性,因而表明风尘是罗布泊沉积的重要物源,并可据此来恢复10000a以来本区尘暴作用的强弱变化。 相似文献