首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 331 毫秒
1.
On April 25, 2015, Nepal was struck by the MW7.8 Gorkha earthquake followed by an intense aftershock sequence. It was one of the most destructive earthquakes in the Himalayan arc, causing more than 8900 fatalities. In this study, we analyzed the dataset (429 events, magnitude of completeness (Mc) ≥ 4.2 local magnitude) of the first 45 days after the Gorkha earthquake to estimate the seismicity parameters b-value, D-value, and p-value. We used the maximum likelihood method to estimate the b-value and Omori-Utsu parameters, whereas the correlation integral method was applied to estimate the fractal dimension (D-value). The analysis was carried out using running and sliding window techniques. The lowest b-value (0.57 ± 0.04) and the highest D-value (1.65 ± 0.02) were computed at the time of the Gorkha earthquake, after which the b-value significantly increased to a maximum of 1.57. It again dropped to 0.93 at the time of the major aftershock on May 12, 2015. The D-value showed an initial quick drop and then decreased in a wavy pattern until the end of the study period, indicating the clustering and scattering of earthquakes in a fault region. The b-value contour map identified the eastern part of the study area as a high stress region (b = ~0.8), implying that the stress shifted to that region. The D-value contour map reveals that the seismogenic structure shifted from linear to planar in the region. The rate of aftershock decay (p = 0.86 ± 0.04) for a short period reflects that the level of stress decreased rapidly. This study helps to understand the level of stress and seismicity pattern of a region, which could be useful for aftershock studies.  相似文献   

2.
Earthquakes began to occur in Koyna region (India) soon after the filling of Koyna Dam in 1962. In the present study, three datasets 1964–1993, 1993–1995, and 1996–1997 are analyzed to study the b-value and fractal dimension. The b-value is calculated using the Gutenberg–Richter relationship and fractal dimension D corr. using correlation integral method. The estimated b-value and D corr. of this region before 1993 are found to be in good agreement with previously reported studies. In the subsequent years after 1995, the b-value shows an increase. The estimated b-values of this region are found within the limits of global average. Also, the pattern of spatial clustering of earthquakes show increase in clustering and migration along the three zones called North-East Zone, South-East Zone (SEZ), and Warna Seismic Zone. The earthquake events having depth ≤5 km are largely confined to SEZ. After 1993, the D corr. shows decrease, implying that earthquake activity gets clustered. This seismic clustering could be helpful for earthquake forecasting.  相似文献   

3.
Detecting tempo-spatial changes of crust stress associated with major earthquakes has implications for understanding earthquake seismogenic processes. We conducted a joint analysis of b-value and apparent stress in the source region before the March 11, 2011 MW9.0 Tohoku-Oki, Japan earthquake. Earthquakes that occurred between January 1, 2000 and March 8, 2011 were used to estimate b-values, while source parameters of events with magnitudes of Ms5.0–6.9 between January 1, 1997 and March 8, 2011 were used to calculate the apparent stresses. Our results show that the average b-value decreased steadily from 1.26 in 2003 to 0.99 before the Tohoku-Oki mainshock. This b-value decrease coincided with an increase in the apparent stress from 0.65 MPa to 1.64 MPa. Our results reveal a clear negative correlation between the decrease in b-value and increase in apparent stress, which lasted for approximately eight years prior to the 2011 mainshock. Additionally, spatial pattern results of the relative change in b-value show that the area associated with drastic b-value decreases (25% or greater) was concentrated near the 2011 mainshock epicenter. The joint analysis of b-value and apparent stress provides a promising method for detecting anomalies that could serve as potential indicators of large earthquakes.  相似文献   

4.
Iran sits on a region with a high intrinsic level of seismic activity due to its tectonic setting. Through statistical examination of the earthquakes listed in the catalogue from International Institute of Earthquake Engineering and Seismology (IIEES), this research attempted to calculate some seismicity factors and find correlation between them. A preliminary analysis indicated changes in the b-value of the Gutenberg-Richter relationship over the study region. Thus, the study area was divided into five zones (Alborz, Zagros, Azerbaijan, Central and East) and b-value was computed for each zone. Considering faulting mechanism styles and the b-values in the region, it was found that the lowest b-values belong to the thrust events and strike-slip faulting earthquakes have intermediate values. These findings support previous studies. Furthermore, results of b-value calculation were used for the estimation of accumulated differential stresses (σ1σ2) over each zone. Overall, the b-value for Iran is averagely low which signifies the high stress tectonic regime in this region. Also, by having calculated fractal dimension (D) in each zone, a correlation obtained showing that in Iran region, the b-value correlates to fractal dimension by D = 4.2b–2 relation which does not support Aki's (1981) speculation of D = 3b/c.  相似文献   

5.
A multifractal analysis of seismicity of three large earthquakes in Chile is made: the Central Zone 1985 (M W = 8.0), Antofagasta 1995 (M W = 8.1), and Maule 2010 (M W = 8.8) earthquakes. The analysis shows that the fractal dimension spectrum D q decreases with time before an earthquake. This fact suggests that the spatial distribution of seismic events could form a cluster before a main shock.  相似文献   

6.
This study analyses the temporal clustering, spatial clustering, and statistics of the 2012–2013 Torreperogil-Sabiote (southern Spain) seismic swarm. During the swarm, more than 2200 events were located, mostly at depths of 2–5 km, with magnitude event up to mbLg 3.9 (Mw 3.7). On the basis of daily activity rate, three main temporal phases are identified and analysed. The analysis combines different seismological relationships to improve our understanding of the physical processes related to the swarm's occurrence. Each temporal phase is characterized by its cumulative seismic moment. Using several different approaches, we estimate a catalog completeness magnitude of mc≅ 1.5. The maximum likelihood b-value estimates for each swarm phase are 1.11 ± 0.09, 1.04 ± 0.04, and 0.90 ± 0.04, respectively. To test the hypothesis that a b-value decrease is a precursor to a large event, we study temporal variations in b-value using overlapping moving windows. A relationship can be inferred between change in b-value and the regime style of the rupture. b-values are indicators of the stress regime, and influence the size of ruptures. The fractal dimension D2 is used to perform spatial analysis. Cumulative gamma and beta functions are used to analyse the behaviour of inter-event distances during the earthquake sequence.  相似文献   

7.
Introduction Data mining (SHAO and YU, 2003) is a new kind of technique developed with database and artificial intelligence in recent years, which processes the data in the database to abstract the im- plied and pre-unknown, but potentially useful information and knowledge from large amounts of incomplete, noisy, blurring and stochastic data. For data mining, data purging is an important link beforehand that includes eliminating noise, making up lost domain, and deleting ineffective data, as…  相似文献   

8.
The seismological data in the area of induced seismicity in the region of the Nurek reservoir are analyzed. The analysis is based on the developed database for the earthquakes that occurred from 1955 to 1989 and is aimed at finding the regularities in the variations of the parameters of the transitional seismic regime caused by filling a reservoir. These parameters include the b-value—the slope of the graph of the Gutenberg–Richter frequency–magnitude relationship, the fractal dimension d of the set of the epicenters, and fracture cycle parameter q = αb ? d, where coefficient α determines the ratio between the magnitude and source size M = α log l + β. It is shown that during the filling of a reservoir, these parameters undergo statistically reliable variations: at the initial stages, the b-value increases, the fractal dimension of the set of epicenters decreases, and the fracture cycle parameter q grows and becomes positive in the middle of the time interval of reservoir filling. After a reservoir is filled, these parameters recover their background values. The aftershock sequences of the three strongest earthquakes—before, in the beginning, and in the middle of the reservoir filling period—are studied. It is confirmed that the Omori parameter p for the aftershock sequences during filling is smaller than for the earthquake before filling. Based on the dynamics of the studied parameters, it is conjectured that the relaxation time of the transitional seismic regime after the emergence of induced seismicity is about 10 years.  相似文献   

9.
2017年8月8日青藏高原东缘四川九寨沟地区发生7.0级强震,依据前人研究结果分析九寨沟7.0级地震发震构造,并计算震前应力状态。结果显示:本次地震受到构造和历史强震的影响,是发生在历史强震引起的应力加载区域。另外,采用中国地震台网1990年以来的地震目录,在评估目录完整性的基础上,利用最大似然法计算得到2017年8月8日九寨沟7.0级地震前震源区及邻区地震b值空间图像。结果显示,九寨沟7.0级地震发生在四川北部地区显著低b值高应力异常区域内部(0.82b0.75)。所以,研究区域内外历史强震可能促进了九寨沟7.0级地震的发生。  相似文献   

10.
We have monitored seismic activity induced by impoundment of Lake Jocassee in northwest South Carolina for about two years. Low-level shallow activity was recorded. The larger felt events (2.0 ? ML ? 2.6) were found to be associated with precursory changes in one or more of the following; number of events, tS/tp ratio values and radon concentrations in groundwater.The microearthquakes in the precursory period were accurately located in time and space, and their location pattern was used to develop an empirical earthquake prediction model.The precursory period consists of two phases; α-phase or a period of slow (or no) increase in seismicity, and β-phase, a period when the activity increase is more rapid. The main shock was found to be located within a cluster, a “target” area defined by the location of events in the β-phase. There is a general absence of seismic activity in the “target” area in the α-phase. The main shock occurred soon after a period of quiescence in the seismic activity in the β-phase. The magnitude of the shock, ML is given by: ML = 2 log D ? 0.07, where D is the duration of the precursory period in days.The model was successfully tested with data for a magnitude 2.3 event on February 23, 1977 which was also accompanied by radon and ts/tp anomalies.  相似文献   

11.
The depth changes in the b-value and density of the number of earthquakes in different magnitude bins (M ≥ 1.8, M ≥ 3.0, M ≥ 3.5) are analyzed using highly accurate seismological observations carried out in 1955–1991 at the Garm prognostic area in Tadjikistan. It is found that the observed b-values are controlled by the variations in the proportion between weak and strong earthquakes. Two horizons with different patterns of the b-value are identified in the Earth’s crust above and below a depth of 15–16 km. The b-value in the upper and lower horizons is close to 0.8 and 1.2, respectively. The lower horizon is marked by almost complete absence of relatively strong earthquakes with M ≥ 3.0. The observed changes in the b-value with increasing depth could probably be due to the increase in the strength of crustal material caused by the growth in temperature and confining pressure in the depth interval from 0 to 15 km. The transitional interval between the upper and lower crustal horizons (~13–18 km), which is characterized by a sharp drop in seismic activity, can probably be associated with the zone of the phase transition of crustal material from an elastic brittle state to a plastic state, as suggested by some authors. Typically, the top of this zone hosts the hypocenters of the strongest earthquakes in a given territory. The correlation is established between the crustal areas with low b-values and the locations of the strongest earthquakes in the region. It is suggested that the three-dimensional mapping of the b-value can be helpful for estimating the location, depth, and maximal magnitude of the probable strong earthquakes in seismically active regions and can be used to assess seismic risks.  相似文献   

12.
The time variations in the Gutenberg–Richter b-value are minutely studied based on the data of highly accurate seismological observations at the Garm prognostic site, Tajikistan, where a stationary network of seismic stations of the Complex Seismological Expedition (CSE) of Schmidt Institute of Physics of the Earth (IPE) of the USSR (Russian) Academy of Sciences was in operation from 1955 to 1992. A total of 93035 local earthquakes ranging from 0.0 to 6.3 in the Ml magnitudes are considered. The spatiotemporal fluctuations in the minimal magnitude of completeness of the earthquakes, Mc, are analyzed. The study considers a 25-year interval of the observations at the center of the observation system within which Mc = 0.9. It is shown that in most cases, the b-value and log10E2/3 experience characteristic time variations before the earthquakes with magnitudes higher than the minimal magnitude of the predicted earthquake (MPE). The 6-year anomaly in the parameters’ b-value, log10E2/3, and log10N associated with the single strongest earthquake with M = 6.3 that occurred in the observation region on October 26, 1984 is revealed. The inversely proportional relationship is established between the time variations in the b-value and the time variations in the velocities of seismic waves Vp and Vp/Vs. It is shown that the exponent p in the power function which links the time variations of the b-value and log10E2/3 is higher in the zones of crustal compression than in the zones of extension. It is simultaneously confirmed that the average b-value in the zones of compression is lower than in the zones of extension. It is established that in the case of earthquakes with M ≥ 2.6, the time series of seismic activity log10Ni and the time series of the b-value are highly cross correlated with a coefficient of r ≈ 0.75, whereas in the case of earthquakes with M ≥ 0.9, the coefficient of cross correlation between these time series is close to zero (r ≈ 0.06). The law of variations in the slope of the lines approximating the relationship between the log10Ni time series in the different magnitude ranges (MMci) and b-value time series is obtained. It is hypothesized that the seismic activity of the earthquakes with high magnitudes can be estimated provided that the parameters of the time series of the b-value and time series of the number of earthquakes logNMi) in the range of low magnitudes are known. It is concluded that using the parameter log10N for prognostic estimates of the strong earthquakes only makes sense for earthquakes having moderate and large magnitudes. It is inferred that the time variations in the b-value are predominantly contributed by the time variations of the earthquakes with relatively large magnitudes.  相似文献   

13.
The 2022 MS 6.8 Luding earthquake is the strongest earthquake in Sichuan Province, Western China, since the 2017 MS 7.0 Jiuzhaigou earthquake. It occurred on the Moxi fault in the southeastern segment of the Xianshuihe fault, a tectonically active and mountainous region with severe secondary earthquake disasters. To better understand the seismogenic mechanism and provide scientific support for future hazard mitigation, we summarize the preliminary results of the Luding earthquake, including seismotectonic background, seismicity and mainshock source characteristics and aftershock properties, and direct and secondary damage associated with the mainshock. The peak ground displacements in the NS and EW directions observed by the nearest GNSS station SCCM are ~35 mm and ~55 mm, respectively, resulting in the maximum coseismic dislocation of 20 mm along the NWW direction, which is consistent with the sinistral slip on the Xianshuihe fault. Back-projection of teleseismic P waves suggest that the mainshock rupture propagated toward south-southeast. The seismic intensity of the mainshock estimated from the back-projection results indicates a Mercalli scale of VIII or above near the ruptured area, consistent with the results from instrumental measurements and field surveys. Numerous aftershocks were reported, with the largest being MS 4.5. Aftershock locations (up to September 18, 2022) exhibit 3 clusters spanning an area of 100 km long and 30 km wide. The magnitude and rate of aftershocks decreased as expected, and the depths became shallower with time. The mainshock and two aftershocks show left-lateral strike-slip focal mechanisms. For the aftershock sequence, the b-value from the Gutenberg-Richter frequency-magnitude relationship, h-value, and p-value for Omori’s law for aftershock decay are 0.81, 1.4, and 1.21, respectively, indicating that this is a typical mainshock-aftershock sequence. The low b-value implies high background stress in the hypocenter region. Analysis from remote sensing satellite images and UAV data shows that the distribution of earthquake-triggered landslides was consistent with the aftershock area. Numerous small-size landslides with limited volumes were revealed, which damaged or buried the roads and severely hindered the rescue process.  相似文献   

14.
解孟雨  孟令媛 《中国地震》2021,37(2):494-507
利用全国统一目录和流动台站目录,研究了四川盆地东南部长宁地区的地震活动特征和b值的空间分布特征。研究结果显示,长宁地区的地震活动在时间上呈现明显的分段特征,地震活动在2015年后明显增强;在空间上,长宁地区的地震活动主要集中在以28.3°N为界限的南、北2个地区,对于这2个区域的b值演化,计算结果显示出不同的分段特征。此外,研究了不同震中距下,长宁地区2018年兴文5.7级、2019年珙县5.3级和2019年长宁6.0级3次主要地震事件震前与震后的b值演化,结果表明统计范围会显著影响b值的变化特征,当计算范围为20km时,3次主震震前短期内均出现了低于背景b值90%的低b值异常,这表明在地震目录相对完备的情况下,利用低b值异常分析区域地震危险性,应采用较小范围的地震数据。  相似文献   

15.
— Analysis of the Koyna-Warna earthquake catalog (1968–1996) shows that on an average there is a positive correlation between the b value (decrease) and fractal dimensions (decrease in both D2s and D2t) of earthquake epicenters 0.5 and 2.5 years prior to 1973 (M5.2) and 1980 (M5.5) events, respectively, except a negative correlation for about five years (1988–1993) prior to the 1993/1994 sequence (M5.4). This positive correlation indicates a weaker clustering, or that the epicenters tend to fill the two-dimensional plane. While the origin of the negative correlation seems to be that during periods of large events (low b value), there is strong clustering around the main shock epicenter (high fractal dimension). Interestingly, during the last year (1995–1996) of the studied period both the b value and correlation dimensions rose significantly, suggesting that stress release occurs through increased levels of low magnitude and increasingly scattered seismicity, suggesting an increased risk of larger magnitude events. Incidentally, during 2000 three earthquakes of magnitude M 5.0, one earthquake of M 4.0, 45 earthquakes of magnitude M 3.0–3.9, and several thousand earthquakes of M < 3 have occurred in the region. Thus it can be inferred that at local scales the relationship yields both positive and negative correlation that appears to be controlled by different modes of failure within the active fault complex.Acknowledgement. The authors are grateful to Dr. B.K. Rastogi of NGRI for providing the catalog of Koyna earthquakes and for useful scientific discussions. The comments of Dr. I. G. Main have improved the quality of paper for which we extend to him our sincere thanks. One of the authors (AOM) thanks the Third World Academy of Science and the Council of Scientific and Industrial Research, India for the Postdoctoral Fellowship award under which this work was carried out.  相似文献   

16.
—A moderately strong earthquake (M w = 6.2) occurred in the town of Dinar at 17.57 UT on October 1, 1995, taking the lives of 90 people and damaging about 4500 buildings. Its epicenter is located near the Dinar-Çivril fault and its focal mechanism is linked to a northeast-southwesterly tensional stress field arising from the interaction between the subducting African plate and the overriding Aegean-Anatolian plate in the eastern Mediterranean.¶Surface cracks of the October 1 earthquake have been observed 10 km continuously along the Dinar-Çivril fault. The cracks have displayed a mode of dip-slip; however, some have also indicated lateral slip. The different modes of slip are generally in agreement with the fault plane solution and are indicators of the complex nature of the rupture process.¶In investigating the earthquake hazard of the Dinar-Çivril fault and proximity, the maximum likelihood method was used to estimate seismic hazard parameters of b-value, seismicity activity rate λ m and the expected maximum magnitude M max?. The data consisted of the historical data covering the period between 1800–1900 and instrumental data between 1900 and 1992. This method, allowing use of the mixed earthquake catalogue containing both historical and instrumental earthquake data, yielded values of 0.70, 1.92 and 7.14 for b, λ m and M max?, respectively. The recurrence time estimated for an earthquake of a magnitude of M w = 6.2 is 123 years. The non-occurrence probabilities of such an earthquake in 1 and 50 years are 0.21 and 0.04, respectively.  相似文献   

17.
Seismicity of the Earth (M ≥ 4.5) was compiled from NEIC, IRIS and ISC catalogues and used to compute b-value based on various time windows. It is found that continuous cyclic b-variations occur on both long and short time scales, the latter being of much higher value and sometimes in excess of 0.7 of the absolute b-value. These variations occur not only yearly or monthly, but also daily. Before the occurrence of large earthquakes, b-values start increasing with variable gradients that are affected by foreshocks. In some cases, the gradient is reduced to zero or to a negative value a few days before the earthquake occurrence. In general, calculated b-values attain maxima 1 day before large earthquakes and minima soon after their occurrence. Both linear regression and maximum likelihood methods give correlatable, but variable results. It is found that an expanding time window technique from a fixed starting point is more effective in the study of b-variations. The calculated b-variations for the whole Earth, its hemispheres, quadrants and the epicentral regions of some large earthquakes are of both local and regional character, which may indicate that in such cases, the geodynamic processes acting within a certain region have a much regional effect within the Earth. The b-variations have long been known to vary with a number of local and regional factors including tectonic stresses. The results reported here indicate that geotectonic stress remains the most significant factor that controls b-variations. It is found that for earthquakes with M w ≥ 7, an increase of about 0.20 in the b-value implies a stress increase that will result in an earthquake with a magnitude one unit higher.  相似文献   

18.
Recent seismicity in the northeast India and its adjoining region exhibits different earthquake mechanisms – predominantly thrust faulting on the eastern boundary, normal faulting in the upper Himalaya, and strike slip in the remaining areas. A homogenized catalogue in moment magnitude, M W, covering a period from 1906 to 2006 is derived from International Seismological Center (ISC) catalogue, and Global Centroid Moment Tensor (GCMT) database. Owing to significant and stable earthquake recordings as seen from 1964 onwards, the seismicity in the region is analyzed for the period with spatial distribution of magnitude of completeness m t, b value, a value, and correlation fractal dimension D C. The estimated value of m t is found to vary between 4.0 and 4.8. The a value is seen to vary from 4.47 to 8.59 while b value ranges from 0.61 to 1.36. Thrust zones are seen to exhibit predominantly lower b value distribution while strike-slip and normal faulting regimes are associated with moderate to higher b value distribution. D C is found to vary from 0.70 to 1.66. Although the correlation between spatial distribution of b value and D C is seen predominantly negative, positive correlations can also be observed in some parts of this territory. A major observation is the strikingly negative correlation with low b value in the eastern boundary thrust region implying a possible case of extending asperity. Incidentally, application of box counting method on fault segments of the study region indicates comparatively higher fractal dimension, D, suggesting an inclination towards a planar geometrical coverage in the 2D spatial extent. Finally, four broad seismic source zones are demarcated based on the estimated spatial seismicity patterns in collaboration with the underlying active fault networks. The present work appraises the seismicity scenario in fulfillment of a basic groundwork for seismic hazard assessment in this earthquake province of the country.  相似文献   

19.
2016年新疆呼图壁6.2级地震前b值异常特征研究   总被引:1,自引:0,他引:1       下载免费PDF全文
利用2009年以来中国地震台网中心地震编目资料,以2016年新疆呼图壁6.2级地震作为研究对象,采用最大似然法进行b值空间扫描计算,获取震前震中及其邻区地震b值的空间图像。研究结果显示,2016年呼图壁6.2级地震发生在震前显著低b值区域,该异常特征可能反映了地震孕育的应力积累过程,印证了b值的物理意义。  相似文献   

20.
The new scale Mt of tsunami magnitude is a reliable measure of the seismic moment of a tsunamigenic earthquake as well as the overall strength of a tsunami source. This Mt scale was originally defined by Abe (1979) in terms of maximum tsunami amplitudes at large distances from the source. A method is developed whereby it is possible to determine Mt at small distances on the basis of the regional tsunami data obtained at 30 tide stations in Japan. The relation between log H, maximum amplitude (m) and log Δ, a distance of not less than 100 km away from the source (km) is found to be linear, with a slope close to 1.0. Using three tsunamigenic earthquakes with known moment magnitudes Mw, for calibration, the relation, Mt = log H + log Δ + D, is obtained, where D is 5.80 for single-amplitude (crest or trough) data and 5.55 for double-amplitude (crest-to-trough) data. Using a number of tsunami amplitude data, Mt is assigned to 80 tsunamigenic earthquakes that occurred in the northwestern Pacific, mostly in Japan, during the period from 1894 to 1981. The Mt values are found to be essentially equivalent to Mw for 25 events with known Mw. The 1952 Kamchatka earthquake has the largest Mt, 9.0. Of all the 80 events listed, at least seven unusual earthquakes which generated disproportionately-large tsunamis for their surface-wave magnitude Ms are identified from the relation. From the viewpoint of tsunami hazard reduction, the present results provide a quantitative basis for predicting maximum tsunami amplitudes at a particular site.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号