共查询到20条相似文献，搜索用时 171 毫秒
1.
海洋导管架平台的极限强度分析 总被引：5，自引：1，他引：5
海洋导管架平台的极限分析是一项较新的研究课题，随着海上采油事业的飞速发展，它已越来越受到海洋工程设计及维修部门的重视。其研究成果不仅能用于设计结构的应力校核，尚可用于现有平台结构的整体安全估算。本文利用非线性模拟技术及线性分析程序的完美结合。成功地分析计算了受集中哉茶作用的空间框架结构，及受静载荷和环境载荷作用下的真实导管架平台极限强度。 相似文献
2.
Efficient Approximate Method of Global Reliability Analysis for Offshore Platforms in the Ice Zone 总被引：1，自引：0，他引：1
Ice load is the dominative load in the design of offshore platforms in the ice zone, and the extreme ice load is the key factor that affects the safety of platforms. The present paper studies the statistical properties of the global resistance and the extreme responses of the jacket platforms in Bahai Bay, considering the randomness of ice load, dead load, steel elastic modulus, yield strength and structural member dimensions. Then, based on the above results, an efficient approximate method of the global reliability analysis for the offshore platforms is proposed, which converts the implicit nonlinear performance function in the conventional reliability analysis to linear explicit one. Finally, numerical examples of JZ20-2 MSW, JZ20-2NW and JZ20-2 MUQ offshore jacket platforms in the Bahai Bay demonstrate the satisfying efficiency, accuracy and applicability of the proposed method. 相似文献
3.
For the fulfillment of the probability-based structural design for the offshore jacket platforms in the Bohai Bay, the design factors of loads, resistance and load combinations are much necessary to be calibrated according to the proposed target reliability index. Firstly, the limit states function for the offshore jacket platforms is introduced. Then, four approaches to calibrate the factors of load and resistance are presented and compared. Afterwards, the methods to calibrate the load combination factors are developed. Finally, the factors of load, resistance and load combination for the offshore jacket platforms in the Bohai Bay are calibrated and the corresponding design formulae are recommended. The results are proved to be rational in practice, and also illustrate that the proposed target reliability index for offshore jacket platforms in the Bohai Bay is also appropriate. 相似文献
4.
The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design.However,the target reliability index for offshore jacket platforms based on different sea areas in China has never been calibrated.This paper presents an approach for its calibration,and suggests many kinds of associated load cases.The uncertainties of loads and structural resistance are mainly investigated.The target reliability index for structural components,tubular joints and piles of offshore jacket platforms are discussed respectively in detail.Finally,through the calibrated results from the offshore jacket platforms of QK18-1,JZ20-2,SZ36-1 and BZ28-1 in the Bohai Bay,it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period.The results provide significant reference for the design of offshore jacket platforms. 相似文献
5.
The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design. However, the target reliability index for off-shore jacket platforms based on different sea areas in China has never been calibrated. This paper presents an approach for its calibration, and suggests many kinds of associated load cases. The uncertainties of loads and structural resistance are mainly investigated. The target reliability index for structural components, tubular joints and piles of offshore jacket platforms are discussed respectively in detail. Finally, through the calibrated results from the offshore jacket platforms of QK18-1, JZ20-2, SZ36-1 and BZ28-1 in the Bohai Bay, it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period. The results provide significant reference for the design of offshore jacket platforms. 相似文献
6.
For the fulfillment of the probability-based structural design for the offshore jacket platforms in the Bohai Bay, the design factors of loads, resistance and load combinations are much necessary to be calibrated according to the proposed target reliability index. Firstly, the limit states function for the offshore jacket platforms is introduced. Then, four approaches to calibrate the factors of load and resistance are presented and compared. Afterwards, the methods to calibrate the load combination factors... 相似文献
7.
1 .IntroductionThe structural design method has evolvedfromthe workingstress method,damage stage methodtolimit state method.The more recent probabilisticlimit state design method,whichis based onreliabili-tytheory,has beengenerallyacceptedinthe designcode… 相似文献
8.
极端荷载作用下海洋导管架平台体系可靠度分析 总被引：4，自引：1，他引：4
采用非线性倒塌分析方法，考虑桩－土－结构的非线性相互作用，研究了导管架平台在极端荷载作用下承载能力的计算模型，分析了平台结构体系在极端荷载作用下的全倒塌全过程，在此基础上，结合蒙特卡洛法，提出了海洋导管架平台结构的体系可靠度计算方法。最后对工程实例－涠11－4C海洋平台的结构进行了体系可靠性分析，并对比分析了不同的荷载效应计算公式对计算经的影响，研究表明计算经满足工程设计要求，便于工程应用。 相似文献
9.
Corrosion and fatigue cracks are major threats to the structural integrity of aging offshore platforms.For the rational estimation of the safety levels of aging platforms,a global reliability assessment approach for aging offshore platforms with corrosion and fatigue cracks is presented in this paper.The base shear capacity is taken as the global ultimate strength of the offshore plaffoms,it is modeled as a random process that decreases with time in the presence of corrosion and fatigue crack propagation.And the corrosion and fatigue crack growth rates in the main members and key joints are modeled as random variables.A simulation method of the extreme wave loads which are applied to the structures of offshore platforms is proposed too.Furthermore,the statistics of global base shear capacity and extreme wave loads are obtained by Monte Carlo simulation method.On the basis of the limit state equation of global failure mode,the instantaneous reliability and time dependent reliability assessment methods are both presented in this paper.Finally the instantaueous reliability index and time dependent failure probability of a jacket platform are estimated with different ages in the demonstration example. 相似文献
10.
导管架式海洋平台结构极限承载力分析的整体推进法及其软件 总被引：9，自引：1，他引：8
根据非线性有限元逐步分析的思想,以已有的结构弹性分析软件为计算核心,提出了一种近似分析结构极限承载力的方法——整体推进法;采用整体推进法,以导管架式海洋平台结构线弹性分析软件ＥＮＳＡ为计算核心,考虑结构构件的损伤影响和维修加固效果,编制了导管架式海洋平台结构极限承载力近似分析软件ＵＡＰ,为导管架式海洋平台结构的安全度评定提供了方法和手段;最后对渤海八号生产／储油平台在１９９３年的状态和ＪＺ２０２ＭＵＱ平台的完好状态进行了极限承载力分析 相似文献
11.
Corrosion of offshore platforms is inevitable. In an ocean corrosion environment, the strength of a platform is weakened greatly. When simultaneously subjected to earthquakes or other extreme loads, the ultimate bearing capacity of the corroded platform is dramatically reduced, resulting in compounded damage from both corrosion and earthquake. Thus, the influence of corrosion cannot be neglected in the seismic performance investigation of platforms. The commonly used corrosion model in platform design is uniform corrosion, and the corrosion rate rule for any parts or zones in a platform is the same. In real cases, however, there are significant differences between the corrosion characteristics in different parts of a platform. Based on theoretical aspects and measured data, a zonal time-variant corrosion model of a platform is developed for a seismic collapse performance investigation. The pushover and incremental dynamic analysis (IDA) methods are adopted here to calculate the collapse margin ratio (CMR), there serve strength ratio (RSR) and ductility coefficient (μ) that are frequently used for the safety reserve evaluation of a platform. The failure reason and collapse probability of platforms considering different service periods are compared. The most prominent feature of the proposed time-variant zonal corrosion model is to capture potential switch of weak location and resulting failure path of corroded jacket offshore platforms although the proposed model needs further calibration by more reliable in-field measured data. As expected, corrosion can definitely cause a reduction in earthquake resistance of a jacket offshore platform, as well as ultimate deformability. The coupled effect between the time-variant vibration properties of the platform and the spectral characteristics of selected motions, the collapse-level spectral acceleration (SA) does not always decrease with increasing corrosion degree. The curves corresponding to normalized CMR and RSR agree very well with each other in the early corrosion development stage and service period beyond 30 years. Some distinct differences can be found during the two stages, with the greatest difference up to 10% for the example platform. 相似文献
12.
Optimum Design of Structure Shape for Offshore Jacket Platforms 总被引：1，自引：1，他引：0
FENG Sheng 《中国海洋工程》2000,14(4):435-445
With the introduction of the design variables of nodal coordinates,which reflect the em-bedded depth of the pile and the jacket bed height,a shape optimum design model for offshore jacket plat-forms is established.A sequential two-level optimum algorithm is developed based on the design variablegradation.On the basis of the finite element method,the sensitivity of the objective function and nodal dis-placement is analyzed.As an example,the BZ281 oil storage offshore platform,which lies in the Bohai oilfield,is designed with the shape optimum model.The results are compared with the cross-section optimumdesign.The tendency of design variables and its reasons in the two methods are analyzed.In the shapeoptimum design,the value of objective function is obviously smaller than that of the initial design and thecross-section optimum design.Therefore,the advantage of structure shape optimum design for jacket plat-forms is remarkable. 相似文献
13.
迄今为至胜利浅海油田已相继建成大小平台几十座,平台结构型式是导管架式,志管架平台的结构计算理论已基本成熟,现场应力测试是对平台结构设计的验证、补充和发展,但是有关平台的现场应力测试在海洋工程界则是一个空白。本文主要介绍埕北２５Ａ井组平台现场应力测试的方法、结果以及与理论计算的对比。 相似文献
14.
以实际环境荷载作用下的实际海洋导管架平台结构为对象，研究了海洋平台结构在风，流，海冰等多荷载模式和多荷载工况下的优化设计的理论方法和应用技术，建立了结构尺寸优化，形状优化和拓扑优化问题的统一模型。计算结果反映出形状优化比尺寸优化所得设计更优，而拓扑优化的设计效果最好。不同的荷载工况对应的最优拓扑形式不同，因此在实际设计中应考虑实际的荷载工况，选取不同的拓扑形式。 相似文献
15.
单点系泊海洋导管架平台结构体系可靠性分析 总被引：4，自引：1，他引：3
采用非线性逐步倒塌分析方法,考虑桩-土-结构的非线性相互作用,研究了单点系泊海洋导管架平台在极端荷载作用下的承载能力计算模型,在此基础上结合蒙特卡洛随机抽样法,提出了单点系泊海洋导管架平台结构体系可靠度计算方法。最后对工程实例BZ28-1SPM单点系?白海洋导管架平台结构在20年设计基准期和50年重现期进行了体系可靠性分析：研究结果表明：用50年重现期的环境荷载参数来进行BZ28-1SPM单点系泊海洋导管架平台结构的设计是合理的;在环境荷载中起主导作用的是由波浪引起的系泊力;在海洋平台结构的设计及对已服役平台结构的评估中运用体系可靠度理论,可以为海洋平台结构的设计、维护和评估提供理论依据。 相似文献
16.
Reliability-Based Design for Jacket Platform Under Extreme Loads 总被引：7，自引：0，他引：7
In this paper, reliability analysis for the offshore jacket platform with the interaction of structure- pile- soil under extreme environmental loads is carried out. The inherent uncertainties of the environmental load, foundation soil, platform itself, and calculating models are evaluated. The action of extreme loads on the offshore platform is modeled as a function of extreme wave height. The system capacity of the whole platform is determined by nonlinear pushover analysis, and the relevant probability property is obtained by the simulation method. The reliability model for the whole jacket platform is described as the relationship between the load and resistance based on the offshore design codes. The reliability of whole platform is calculated by the analytical method and the importance sampling method on the basis of a case study for a tripod jacket platform. 相似文献
17.
针对在役老龄导管架平台进行倒塌计算分析,确定极限承载力进而评估老龄导管架的安全裕度。采用非线性有限元方法,考虑平台的波流载荷及桩-土的非线性相互作用,利用SACS软件建立导管架整体三维有限元计算分析模型,并用逐步加载的方式,对南海某导管架平台进行了全过程非线性倒塌分析。计算分析表明,该导管架平台极限强度很高,具有较大的安全裕度;导管架倒塌过程呈逐步破坏形式,先是撑杆屈服,造成局部结构破坏,然后是钢桩发生屈服,降低结构承载力,最后节点逐步失效,造成结构倒塌。揭示了导管架平台结构失效倒塌的机理,给出了倒塌分析的可行方法和步骤。 相似文献
18.
Corrosion and fatigue cracks are major threats to the structural integrity of aging offshore platforms. For the rational estimation of the safety levels of aging platforms, a global reliability assessment approach for aging offshore platforms with corrosion and fatigue cracks is presented in this paper. The base shear capacity is taken as the global ultimate strength of the offshore platforms. It is modeled as a random process that decreases with time in the presence of corrosion and fatigue crack propagati... 相似文献
19.
A system reliability estimation method for spatial jacket platforms is developed in this paper,The jacket platform is modeled into three-dimensional assembly of spatial beam and plate elements in Fi-nite Element Method(FEM).The limit failure states correspond to collapse of a series of structural mem-bers which are identified by engineering design criteria.In this paper the following aspects are taken intoaccount:the punching shear and buckiing failures in member failure modes for the tubular joints and tubu-lar columns respectively;incremental loading approach for establishment of the safety margin equations ofsystem failure;the algorithm of enumerating significant failure modes for the structural systems and otherconcepts,such as the false failure mode and the virtual limit state.The final work is devoted to the reliabili-ty analysis for a practical jacket platform presently put into operation on the Bohai Sea.The computed re-sults shows that method suggested in this paper is feasible and effective for 相似文献
20.
1.IntroductionLoad and Resistance Factor Design(LRFD)isthe commonly adoptedreliability-based designfor-mat for structural design(CNE,1990;AAHTO,1994;OMTC,1983;CMC,1984).Code calibra-tionforthe LRFDformat is a processto determinethetarget reliability by de… 相似文献