共查询到20条相似文献，搜索用时 15 毫秒
1.
Analysis of strength and moduli of jointed rocks 总被引：1，自引：0，他引：1
This paper deals with two aspects of jointed rock mass behavior, first the finite element modeling of a jointed rock mass as an equivalent continuum, second the comparison of empirical strength criteria of a jointed rock mass. In finite element modeling the jointed rock properties are represented by a set of empirical relationships, which express the properties of the jointed medium as a function of joint factor and the properties of the intact rock. These relationships have been derived from a large set of experimental data of tangent elastic modulus. It is concluded that equivalent continuum analysis gives the best results for both single and multiple jointed rock. The reliability of the analysis depends on the estimation of joint factor, which is a function of the joint orientation, joint frequency and joint strength.Empirical strength criteria for jointed rocks, namely Hoek and Brown, Yudhbir et al., Ramamurthy and Arora, Mohr–Coulomb have been incorporated in a nonlinear finite element analysis of jointed rock using the equivalent continuum approach, to determine the failure stress. The major principal stress at failure, obtained using Ramamurthy's criteria, compares very well with experimental results. 相似文献
2.
In this paper a coupled finite and boundary element formulation is developed for the analysis of excavation in jointed rock. The presence of joints in the rock mass has been included implicitly by treating it as an appropriate anisotropic elastic continuum. The boundary element formulation for an anisotropic medium is briefly discussed. Good agreement has been found between numerical and analytical solutions for several example problems, demonstrating the accuracy of the present formulation. Numerical solutions are also presented for the problems of a deep circular tunnel and a basement excavated in a variety of jointed rock masses. 相似文献
3.
When rock failure is unavoidable, the designer of engineering structures must know and account for the residual strength of the rock mass. This is particularly relevant in underground coal mine openings. Pre-existing discontinuities play an important role in the mechanical behavior of rock masses and thus it is important to understand the effects of such pre-existing discontinuities on the residual strength. For this purpose, the present study demonstrates a numerical analysis using a discrete element method simulation. The numerical results indicate that fracture intensity has no significant influence on the residual strength of jointed rock masses, independent of confining conditions. As confining pressures increase, both peak and residual strengths increase, with residual strength increasing at a faster rate. The finding was further demonstrated by analyzing documented laboratory compressive test data from a variety of rocks along with field data from coal pillars. A comprehensive interpretation of the finding was conducted using a cohesion-weakening-friction-strengthening (CWFS) model. The effect of rock bolts on rock mass strength was also evaluated by using a discrete element method model which suggested that rock bolts can significantly increases residual strength but have limited effect on increasing the peak strength of rock masses. 相似文献
4.
In nature, there exist several forms of anisotropy in rock masses due to the presence of bedding planes, joints, and weak layers. It is well understood that the anisotropic properties of jointed rock masses significantly affect the stability of surface and underground excavations. However, these critical anisotropic characteristics are often ignored in existing uniaxial dynamic failure criteria. This study investigates the effect of a pre-existing persistent joint on the rate-dependent mechanical behaviours of a rock mass using a particle mechanics approach, namely, bonded particle model (BPM), to realistically replicate the mechanical response of the rock mass. Firstly, in order to capture the rate-dependent response of the jointed rock mass, the BPM model is validated using published experimental data. Then, a dynamic strength model is proposed based on the Jaeger criterion and simulation results. To further investigate the dynamic behaviours, the dynamic uniaxial compressive strength (UCS) for anisotropic rock masses with various joint orientations is investigated by subjecting the BPM models to uniaxial compression numerical tests with various strain rate. The proposed dynamic strength model is validated based on numerical simulation results. Finally, the fragmentation characteristics of the jointed rock masses are analysed, which demonstrate that the failure mode affects the dynamic UCS. This is further confirmed by the analysis of the orientations of microscopic cracks generated by the compression loading. 相似文献
5.
《Computers and Geotechnics》1987,3(1):61
The capacity of numerical methods is very large. It covers complex geomtries, nonlinear material laws, excavating phases in tunnelling. The finite element methods has been developed from continuum theory. Hence, the method is readily applicable for materials like steel, salt-rock, fluids, sands, clays but less suitable for concrete, jointed rocks, discontinua. Real failure modes during excavation in rock are scarcely covered by the finite element approach but satisfactory results are obtained if stresses and deformations under working loads are of interest. Problems arising when results obtained by sophisticated analysis have to be interpreted by engineers not familiar with the method are discussed (“black box”). 相似文献
6.
将非线性有限元分析和极限分析相结合形成强度参数折减有限元法,可以灵活地分析强度不均匀顺层路堑边坡支护结构稳定性问题。将岩体力学理论、非线性有限元分析技术和强度折减系数法相结合,对顺层岩体路堑边坡稳定性进行分析。在对密集假设节理有限元模拟中,假设节理在岩体内连续分布,采用连续介质力学方法建立密集分布节理岩体材料模型。采用强度折减系数法计算岩体结构安全系数,建议采用给定的岩体强度参数计算节理岩质边坡开挖、支护完毕后的内力,再逐渐降低岩体强度参数进行岩体边坡非线性有限元分析,直至岩体边坡达到极限状态,从而求出岩质边坡安全系数。采用该方法对渝怀铁路梅江河右岸DK409+989.4～DK410+020段顺层路堑边坡土钉墙支护结构稳定性进行分析,分析结果表明：采用土钉墙支护后的节理边坡塑安全系数为2.3,支护后的岩质边坡处于稳定状态;土钉墙潜在破裂面为岩体弹性区和塑性区的交界面,与测试得到的各排土钉拉力最大值位置一致。 相似文献
7.
This paper presents a coupled, elastoplastic, finite element and boundary element method for the two-dimensional, non-linear analysis of anisotropic jointed rock. The non-linear and anisotropic behaviour of a jointed rock mass is simulated by representing the mass as an equivalent anisotropic, elastoplastic continuum, so that the influence of the jointing system is ‘smeared’ across the continuum, i.e. the individual joints are not modelled as discrete entities. Numerical examples have been solved to verify the capability, accuracy and efficiency of the present technique. The proposed technique has also been applied to the analysis of tunnel excavation problems in plane strain. The effects of anisotropy and non-linearity of the jointed rock mass during excavation have been investigated in some detail. 相似文献
8.
The deformation process and failure mechanism of rock mass with increased density of initial joints subjected to confined stress state are investigated in this study using discrete element method (DEM). A numerical model of standard size granite samples is developed and validated using experimental data for both intact and jointed rocks. The micro-parameters of the rock material are first determined, and the effects of the rock discontinuity on strength, deformability, stress–strain relationship, and failure modes are then investigated at the macro-scale level. Analyses are also performed to examine the tensile and shear crack distributions, fragmentation characteristics, particle kinematics, and energy dissipation to advance the current understanding of the deformation processes and failure mechanisms of jointed rock masses. The microscopic evolutions in the fabric and force anisotropy during loading and distributions of contact forces provide insights into the influence of increasing initial jointing on the macroscopic deformational behavior of the rock. The results show how the deceleration in the growth of fabric and contact force anisotropies develops and confirms that the increase in initial jointing and the associated changes in microstructure can restrain the development of anisotropy, thereby reducing significantly the strength of the rock samples.
相似文献9.
Modeling strategy for jointed rock masses reinforced by rock bolts in tunneling practice 总被引：2，自引：1，他引：1
Shunsuke Sakurai 《Acta Geotechnica》2010,5(2):121-126
This paper deals with the modeling of jointed rock masses reinforced by rock bolts. It is well known that rock bolts are extremely
effective in reinforcing jointed rocks. However, if a continuum approach is adopted for modeling jointed rock masses, it is
often misleading to evaluate the effectiveness of the rock bolts by numerical analyses such as the finite element method.
This may be due to the fact that since no more joints exist in the continuum, the effectiveness of the rock bolts in constraining
the relative displacements along the joints cannot be evaluated properly. In order to investigate the reinforcement effect
of rock bolts, physical model tests were performed in the laboratory. The test results revealed that jointed rock masses should
be modeled as an equivalent continuum after the installation of rock bolts and that the mechanical parameters of the equivalent
continuum should be evaluated by considering the reinforcement effect of the rock bolts. Therefore, the values of the mechanical
parameters differ from place to place in accordance with the relation between joint orientation and rock bolt direction, even
though joint systems are homogeneous. In conclusion, in the continuum approach for modeling jointed rock masses, it should
be emphasized that rock bolts and jointed rock masses should not be modeled separately but should be modeled simultaneously
by considering the reinforcement effect of the rock bolts in constraining joint movement. The modeling of shotcrete reinforced
by steel ribs is also discussed in comparison to the modeling by rock bolts. 相似文献
10.
岩体中普遍存在着断层﹑节理和裂隙等结构面,这些结构面的存在和发展对岩体的整体强度﹑变形及稳定性有极大的影响。因此,研究岩体中原生结构面的萌生﹑发展以及贯通演化过程对评估岩体工程安全性和可靠性具有非常重要的理论与现实意义。扩展有限元法（XFEM）作为一种求解不连续问题的有效数值方法,模拟裂隙时独立于网格,因此,在模拟岩体裂隙扩展﹑水力劈裂等方面具有独特优势。针对扩展有限元法的基本理论及其在岩体裂隙扩展模拟中的应用展开了研究,建立了扩展有限元法求解岩体裂隙摩擦接触、岩体裂隙破坏等问题的数值模型,并将计算模型应用于岩质边坡稳定性分析和重力坝坝基断裂破坏等工程问题。 相似文献
11.
柱状节理岩体原位变形试验力学浅析与模拟 总被引：1，自引：0，他引：1
在白鹤滩坝址区柱状节理岩体原位变形试验成果的基础上,针对节理刚度的取值进行讨论,利用柔性中心孔试验值反算得到柱状节理岩体节理面刚度值。岩体变形是由岩块和节理两部分组成,分析含单节理岩体概念模型的单轴加、卸载规律性和其变形特性,发现其滞回特性是节理力学行为造成的;推导得到了岩体变形计算公式,可用于多组相交节理岩体等效弹性模量的计算,能够反映出节理岩体的各向异性特征;建立了柱状节理随机模型,采用离散元方法和反算的刚度值进行了仿真分析,得到等效变形参数在试验结果范围内。 相似文献
12.
用三维梁-颗粒模型BPM3D(beam-particlemodelinthreedimensions)对岩石类非均质脆性材料的力学性质和破坏过程进行了数值模拟。梁-颗粒模型是在离散单元法基础上,结合有限单元法中的网格模型提出的用于模拟岩石类材料损伤破坏过程的数值模型。在模型中,材料在细观层次上被离散为颗粒单元集合体,相邻颗粒单元由有限单元法中的弹脆性梁单元联结。梁单元的力学性质均按韦伯(Weibull)分布随机赋值,以模拟岩石类材料力学参数的空间变异性。材料内部裂纹通过断开梁单元来模拟。通过自动生成的非均质材料模型对岩石类材料的破坏机理进行研究。岩石类非均质脆性材料在单轴压缩状态下破坏过程细观数值模拟结果显示,岩石材料宏观破坏是由于其内部细观裂纹产生、扩展、贯通的结果。通过数值模拟结果之间的对比分析,揭示出岩石试样宏观破坏模式随细观层次上韦伯分布参数的变化而不同。与实际矿柱破坏形态的对比分析表明了模型的适用性。根据数值模拟结果对岩石类非均质材料的破坏机理进行了探讨。 相似文献
13.
节理的存在是岩体明显区别于岩石的一个重要特征,也是导致岩体具有非均质性及各向异性的一个重要因素。节理岩体在爆炸冲击荷载作用下的破坏特征不仅是岩体力学研究的一个热点问题,也是岩石爆破领域经常遇到的一个工程问题。目前,常用的有限元和离散元等数值方法都不能很客观地反映岩体中节理分布的实际规律,而最新出现的数值流形方法则完全能够按照岩体中节理的实际分布规律进行建模,并能够很好地模拟岩体在外力作用下新裂纹的产生及已有节理的开裂。对3种不同节理岩体,即无节理岩体、均布水平节理岩体、均布垂直节理岩体等在均布垂直于圆周方向上的冲击荷载作用下的破坏过程进行了模拟。由模拟结果可以明显看出,节理的存在对岩体的破坏型式起到了关键性的控制作用。对于完整岩体,其破坏型式呈现出了很好的对称性;而对于水平及垂直节理岩体,其破坏型式在很大程度上受到节理分布的控制。研究结果对岩石爆破工程设计具有一定的指导意义。 相似文献
14.
岩石高边坡开挖卸荷松弛准则研究与工程应用 总被引：2，自引：0，他引：2
基于对卸荷松弛过程和机制的定性分析,提出了以岩石极限拉应变作为卸荷松弛的判别准则。通过对岩石极限拉应变室内试验资料与其抗拉强度之间关系的分析,并结合小湾工程卸荷松弛分析的成功实践经验,提出了极限拉应变值的取值原则,并明确了岩石边坡开挖后实际拉应变的计算方法。运用三维弹黏塑性加锚节理岩体流变模型,将该准则和计算方法应用于锦屏一级拱坝建基面开挖卸荷松弛的数值分析中,通过与实际开挖揭示和声波测试资料的对比,结果表明分析结果较为合理,为工程建设提供了有益的指导 相似文献
15.
以有限差分法(FDM)为计算框架,利用Weibull分布描述细观单元弹性模量和单轴抗压强度的分布特征,采用弹塑性应变软化本构模型描述细观单元的力学响应,进而建立一种模拟非均匀岩石介质破裂的数值模型。采用该数值模型探讨了单轴压缩时细观均质度m及细观结构对数值试样宏观特性的影响。结果表明,（1）随着细观均质度提高,数值模型的非线性特征逐渐减弱,脆性逐渐增强;宏观峰值强度及弹性模量逐渐增大,峰值强度与lnm呈线性关系,而弹性模量与1/m为线性关系;数值试样表现出由塑性流动破坏至剪切破坏进而为张拉破坏的破坏模式;（2）当细观均质度一定时,细观结构或细观单元空间排列是决定岩石力学行为波动性的主要因素;应力–应变曲线峰前阶段对细观单元的空间排列不敏感,但峰值强度附近及峰后阶段对细观单元的空间排列比较敏感。 相似文献
16.
用数值方法对岩质高边坡进行稳定性分析时,描述岩体结构对的精细程度会影响分析结果,但常见的有限单元法程序仍难以对复杂节理岩体进行精细建模。为解决这一问题,将结构面网络模拟与离散单元法相结合,在UDEC软件中,利用FISH语言编写网络模拟程序,依据结构面统计资料和结构面分级,实现对复杂岩体结构的精细描述。以某大型水电工程边坡为例,在对岩体结构进行精细描述的基础上,采用离散元强度折减法对边坡进行稳定性分析。通过与极限平衡法和一般离散元结果的对比,表明基于复杂岩体结构精细描述确定的边坡潜在滑动面和安全系数是合理的,为复杂岩质边坡破坏模式和稳定性的分析提供了新的途径。 相似文献
17.
In this paper, an anisotropic strength criterion is established for jointed rock masses. An orientation distribution function (ODF) of joint connectivity, is introduced to characterize the anisotropic strength of jointed rock masses related to directional distributed joint sets. Coulomb failure condition is formulated for each plane of jointed rock masses by joint connectivity, where the friction coefficient and cohesion of the jointed rock mass are related to those of the intact rock and joint and become orientation dependent. When approximating joint connectivity by its second‐order fabric tensor, an anisotropic strength criterion is derived through an approximate analytical solution to the critical plane problem. To demonstrate the effects of joint distribution on the anisotropic strength of jointed rock masses, the failure envelopes are worked out for different relative orientations of material anisotropy and principal stress axes. The anisotropic strength criterion is also applied to wellbore stability analyses. It is shown that a borehole drilled in the direction of the maximum principal in situ stress is not always the safest due to the anisotropic strength of the jointed rock mass. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
18.
Rock masses encountered in the field are jointed and highly anisotropic. An important manifestation of this characteristic of rock masses is that the blocks, when slipping, separate and create voids in the mass resulting in high lateral strain even under low axial stress. It has been shown in this study that the ratio of lateral to axial strain may be very high, especially, if the joints are critically oriented. The assumption of isotropic linearly elastic material is not applicable in such situations. This observation is based on the outcome of an extensive laboratory testing programme, in which a large number of specimens of a jointed rock mass with various joint configurations were tested under uniaxial loading conditions. The trends of experimental results for both lateral strain ratio and rock mass strength have also been verified through distinct element modelling. The reason for high lateral strains has been attributed to the creation of voids and also to the fact that permanent deformations due to slip commence along rock joints right from the start of loading process. A simple mechanistic model has also been suggested to explain the high values of lateral strain for rough and dilatant rock joints. The lateral strains in such situations are important in the design of rock bolts. An example from a recently completed hydroelectric project has also been discussed where high lateral strain was found to be responsible for excessive wall closure and failure of rock bolts. 相似文献
19.
基于连续介质损伤力学框架,通过损伤张量和有效应力来描述节理岩体的力学性能,自主研发了基于损伤力学模型的有限元程序（CD-FEM）,用于节理岩体等效力学性能研究。同时,采用Karhunen-Loeve（K-L）展开来分解随机输入场,用混沌多项式来表示随机输出场,采用概率配点法生成配点,再由连续损伤有限元分析系统CD-FEM求解确定性方程组,最终得到输出域的统计数据,从而提出了一种将随机分析与基于连续损伤力学模型的数值分析方法解耦进行节理岩体不确定性力学行为分析的方法。利用该方法,对一典型节理岩体在加载条件下的力学行为进行不确定性分析,并与蒙特卡罗方法进行对比,结果表明,所提方法的计算量大大减少,极大地提高了节理岩体力学性能不确定性分析的效率,可应用于对节理岩体在不同载荷条件下的不确定性进行分析。 相似文献
20.
基于UDEC的隧道掘进机滚刀破岩数值模拟研究 总被引：2，自引：0，他引：2
现今全断面隧道掘进机（TBM）施工方法在长大深埋隧道工程中已被广泛采用,对滚刀破岩关键技术的进一步认识具有重要的工程价值。为了研究滚刀破岩机制,分析刀圈断面形态、岩石强度和节理角度对其的影响,运用UDEC方法建立了滚刀贯切岩石的二维数值系列模型,对TBM滚刀破岩过程进行了仿真。分析表明：滚刀破岩是滚刀下岩石拉破坏和剪破坏的综合反映,拉破坏是裂纹萌生与扩展的主要驱动机制;刃宽较大的平刀与刃角较大的楔刀破岩效果较好;平刀与楔刀在软岩中破岩效果相近,平刀在硬岩施工中比楔刀的破岩效果好;滚刀对节理角度为30°～60°的岩石破坏效果较好,由于楔刀的“劈裂”作用,楔刀比平刀更适合用于贯切含有节理的岩石。 相似文献