首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 339 毫秒
1.
IP地址绑定和IP用户管理是校园网管理员的主要工作,作者介绍哈尔滨工业大学校园网IP地址绑定和IP用户管理系统的设计思路及实现技术,该系统是采用J2EE技术和Struts+Hibernate框架实现的B/S结构WEB应用系统,用于校园网用户的IP地址分配I、P地址绑定及IP用户管理等方面。该系统的实现与应用大大提高了网络管理员的工作效率、避免了操作失误、改善了对用户的服务质量。  相似文献   

2.
针对地下CO_2气体受物理及化学性质、储层岩性、物性等因素的影响,现有的常规录、测井评价方法在定性识别与定量评价方面存在不足。利用现场气测录井资料、结合地层测试资料和电缆泵抽取样数据,在对恩平凹陷油层、CO_2气层、含CO_2油层气测烃组分响应特征分析基础上,提出了基于气测烃组分差异的CO_2定性识别与定量评价方法的解释图版。研究表明:(1)优选C_1%、(C_3+C_4+C_5)/C_1作为气测烃组分特征参数建立了CO_2气层的识别图版;(2)利用气测录井C_1%与地层测试、电缆泵抽取样的CO_2含量进行相关性建模,建立了定量评价关系。最后,应用该方法对近期完钻的2口探井中3个显示层进行验证,解释符合率达100%,很好地解决了勘探阶段CO_2定性识别与定量评价难题,为勘探作业快速决策以及后期开发方案制定提供了强有力的技术支撑。  相似文献   

3.
提出了 1种能够比较准确地识别剪切型体系的结构参数 (各层质量和层间刚度 )的方法———消去刚度法。该方法从剪切型结构体系的特征值问题出发 ,利用剪切型结构系统质量矩阵和刚度矩阵的特殊形式 ,通过消去各层的刚度系数 ,得到了结构系统的各层质量比表达式。在结构总质量已知的情况下 ,仅利用系统的任意两阶模态信息就可以确定出各层质量 ,并进而计算出层间刚度 ,实现了结构物理参数的递推识别。数值模拟结果表明 ,该方法识别精度较高 ,便于工程应用 ,可以用于类似结构体系的物理参数的初步估计。  相似文献   

4.
海浪能取之不尽,用之不竭,是最重要的可再生能源之一,具有广阔的发掘潜力。本文提出一种用于收集岸基海浪能的新型弹簧辅助摩擦纳米发电机(spring-assisted triboelectric nanogenerator, SS-TENG)。SS-TENG通过“海浪-浮台-弹簧”传动结构实现海浪能的转化,避免了与海水直接接触,减少了腐蚀环境对发电模块的损坏。SS-TENG通过两种方式显著增强了输出性能,一是利用发电模块中弹簧弹性势能的释放增大各个摩擦纳米发电机(triboelectric nanogenerator, TENG)单元电极层与介电层的瞬间接触速度,使得单个TENG单元输出的峰值电流(peak current,IP)从7.36μA增加到12.12μA;二是利用发电模块中各个TENG单元间的同步运动,将它们进行简单的并联即可实现输出的大幅增加,使得单个TENG单元输出的IP从12.12μA增加到4个并联的43.86μA。SS-TENG转化成的电能可为数字计算器充电并成功点亮160盏LED灯,验证了SS-TENG的输出能力。SS-TENG结构简单、制作成本低、输出性能及工作的长期...  相似文献   

5.
沉积物捕集器是收集水环境中净沉降的悬浮颗粒物质的一种采样器,这种采样器已广泛用于如下几个方面: (1)测定营养物生成层和营养物分解层之间的有机和无机颗粒的垂直通量; (2)探索浮游植物和有机体沉积的量同底栖生物群落的关系; (3)测定浮游植物在大量繁殖期间的沉降速度; (4)开展底栖生物的力能学研究; (5)测定浮游生物的矿化作用和花粉的沉降; (6)对有害物质的控制和监测;  相似文献   

6.
文中设计了一套用于海底观测网的信息采集系统。提出了一种基于事件触发和定时驱动相结合的通过光网传送IP包的信息监控系统运行机制;提出了由岸站监控中心层、光传输主干层、海洋数据采集层组成的监控和信息采集监控系统总体构架;设计了通讯控制策略及自定义的通讯协议。采用该信息采集系统的海底观测网在试验海域进行了海底布放。经过8个月的海底连续运行,数据采集系统运行稳定,能够正确地采集海洋传感器和自身系统运行数据。  相似文献   

7.
雷达高度计海况偏差估计神经网络模型研究   总被引:2,自引:2,他引:0  
本文基于Jason-2高度计数据,在12个不同季节的cycle数据中组合1~6个cycle的有效波高、风速和海况偏差为训练集,选取Jason-2的另外3个不同季节的cycle数据集为测试集。经检验分析,确定3个cycle对应的BP神经网络模型。将该模型应用于HY-2高度计海况偏差的估计,通过海况偏差与有效波高及风速的拟合优度、解释方差和残差对比分析,结果表明:神经网络BP模型可以有效应用于HY-2的海况偏差估计并明显优于传统海况偏差参数模型。  相似文献   

8.
西沙群岛永兴岛西永2井和石岛西科1井均发现铁白云岩。主要通过X光粉晶衍射、偏光显微镜和扫描电镜技术完成测试,分析白云岩-铁白云岩分布及岩相学特征。X光粉晶衍射测试结果及综合分析表明,西科1井发育11层铁白云岩,西永2井发育8层铁白云岩。通过偏光显微镜鉴定,发现西永2井中新世白云岩主要为生物碎屑白云岩,白云石晶体呈粉晶-细晶结构;某些层段含较高铁白云石,呈微晶-粉晶状。通过薄片观察分析发现,西科1井发育大量物碎屑白云岩,多细晶-粉晶结构,自形-半自形为主,部分样品可见黑色铁质氧化物或者胶结物。扫描电镜观察发现2个井多数白云石为典型菱形多面体结构,白云化程度高。  相似文献   

9.
使用有监督机器学习方法进行海洋文献的分类往往存在人工标注量太大的缺点,针对这个问题,提出利用半监督机器学习中的协同训练(Co-training)方法来实现减小人工标注量的目标。该方法从2个View分别训练不同的分类器,在此基础上,根据少量有标注文档从大量无标注文档中获取有用信息,通过协同训练来提升2个分类器的性能,并训练出最终分类模型。实验结果表明,在人工标注仅2篇文献的条件下,该方法最终的分类性能十分接近需人工标注1 500多篇文献的有监督分类器。这说明将Co-training方法应用于海洋文献分类可以大大减小人工标注量,并有着较为良好的分类性能。  相似文献   

10.
针对利用传感数据实现产品性能指标预测问题,本文提出了一种基于多元传感参数的性能指标预测方法。该方法以减少多元传感参数冗余、提高多元传感参数的性能指标预测准确率、缩短测试周期为目的。该方法使用特征选择算法去除冗余传感参数,使用学习算法建模,实现性能指标预测。3个真实传感数据集上的实验结果表明,该方法能有效降低特征维数,性能指标预测准确率均达到91%以上,周期最多缩短了84.19%。  相似文献   

11.
冰区四季通用灯浮标是一种为满足北方冬季冰冻港口一年四季的助航服务需求研制的新型灯浮标,二阶波浪力对其漂浮姿态和漂移运动有较大影响。文中研究了浮标受到的二阶波浪力的数值计算方法,计算了不同流速下罐形和锥形灯浮标的二阶波浪力。研究结果显示,罐形和锥形灯浮标受到的一阶波浪力相差不大,罐形的二阶波浪力明显小于锥形,具有一定的外形优势。  相似文献   

12.
The front slope stability of breakwaters with a homogeneous berm was studied in a large number of two dimensional model tests at Aalborg University, Denmark. The results are presented together with a new formula for prediction of the berm recession which is the most important parameter for describing the reshaping. The formula has also been calibrated and validated against model test data from other researchers. The significance of the new design formula is that it predicts berm recession much better than the existing methods, especially in case of more stable structures.  相似文献   

13.
模拟海洋大气腐蚀试验方法的研究   总被引:1,自引:0,他引:1  
周玲玲 《海洋科学》1985,9(5):24-28
本文以不同浓度的天然海水、人造海水和氯化钠溶液对五种钢材进行了试验,结果表明,采用天然海水喷雾模拟性和试验重现性为最佳,腐蚀形态与海洋环境腐蚀结果基本一致·  相似文献   

14.
Large-scale field tests were conducted to study set-up effect in open-ended prestressed high-strength concrete pipe piles jacked into stratified soil. Four open-ended prestressed high-strength concrete pipe piles with 13 and 18 m in embedment depth were fully instrumented with fiber Bragg grating sensors and installed. Several restrike dynamic tests were performed on each test pile, with the time interval from 21.5 to 284 hours after installation. Static loading tests (SLTs) were later performed on each test pile at 408 hours after installation to substantiate the dynamic tests. Changes with time in pile bearing capacity and in the shaft and toe resistances were studied based on the results of the pile tests. The development of shaft resistance set-up in different layers was studied in particular. It was found that set-up effect in the shaft resistance is significant and the toe resistance increment was minor. The overall set-up factor of total bearing capacity was found to range from 0.09 to 0.53, and the set-up effect of friction pile is much larger than the end bearing pile. More significant set-up in shaft resistance was observed in fill and alluvium layer. The dimensionless set-up factor A for shaft resistance in marine deposits ranges from 0.5 to 1.43, and it contributes the most to the shaft resistance as the shaft resistance in marine deposits is higher.  相似文献   

15.
Stability formulae for armour layers of rubble mound breakwaters are usually being applied assuming perpendicular wave attack. Often the effects of oblique waves are neglected. This is however a conservative assumption since the stability of armour slopes generally increases for oblique waves. New wave basin tests have been performed to assess the effects of oblique waves on the stability of rock slopes and the stability of cube armoured rubble mound breakwaters. The physical model tests were focussed on wave directions between perpendicular (0°) and parallel (90°). The test programme included tests with long-crested waves and tests with short-crested waves. The results show that for rock slopes the influence of oblique waves is larger for long-crested waves. Based on the test results a design guideline is provided to account for effects of oblique waves on the stability of rock slopes, armour layers with a double layer of cubes, and armour layers with a single layer of cubes.  相似文献   

16.
贾彬鹤  李威  梁康壮 《海洋学报》2021,43(10):61-69
传统的四维变分数据同化方法在同化观测资料的同时可以对数值模式参数进行优化,然而传统的四维变分方法需要针对不同的数值模式编写特有的伴随模式,因此算法的可移植性差,同时计算时耗费大量资源。本文提出了一种新的基于解析四维集合变分的参数优化方法,该方法以迭代搜索得到的模式参数为基准展开扰动并构建样本集合,由此显式地计算协方差矩阵,并得到代价函数极小值的解析解,从而避免了伴随模式的使用。基于Lorenz-63模型对该方法进行单参数和多参数数值试验和优化效果检验,并在不同的同化时间窗口长度和观测采样间隔情况下,采用传统四维变分方法与之进行对比,结果显示,新方法表现出与传统四维变分相同的优化性能,都能有效收敛到真值,而新方法不需要计算伴随模式,可移植性好。本文还测试了不同的集合成员个数和模式参数真值的情况下新方法的同化效果,结果表明,新方法对集合样本个数及模型参数真值不敏感,采用较少的集合样本即可完成数据同化。  相似文献   

17.
Subbottom acoustic profiler provides acoustic imaging of the subbottom structure constituting the upper sediment layers of the seabed, which is essential for geological and offshore geo-engineering studies. Delineation of the subbottom structure from a noisy acoustic data and classification of the sediment strata is a challenging task with the conventional signal processing techniques. Image processing techniques utilise the spatial variability of the image characteristics, known for their potential in medical imaging and pattern recognition applications. In the present study, they are found to be good in demarcating the boundaries of the sediment layers associated with weak acoustic reflectivity, masked by noisy background. The study deals with application of image processing techniques, like segmentation in identification of subbottom features and extraction of textural feature vectors using grey level co-occurrence matrix statistics. And also attempted classification using Self Organised Map, an unsupervised neural network model utilising these feature vectors. The methodology was successfully demonstrated in demarcating the different sediment layers from the subbottom images and established the sediments constituting the inferred four subsurface sediment layers differ from each other. The network model was also tested for its consistency, with repeated runs of different configuration of the network. Also the ability of simulated network was tested using a few untrained test images representing the similar environment and the classification results show a good agreement with the anticipated.  相似文献   

18.
单重保温管较传统的双重管中管结构具有很多优势。铺设单重管最容易出现的问题是由于张紧器张力作用而导致单重管各层之间产生剪切力,如果抗剪能力不足产生相对滑移,就会出现拉脱现象,造成工程事故。以某依托工程采用的单重保温管为例,介绍了各层之间抗剪能力的室内全比尺试验方法,给出的试验结果可供设计参考。  相似文献   

19.
20.
上海港与周边港口的国际竞争策略   总被引:7,自引:0,他引:7  
世界航运中心从大西洋转向了太平洋,东亚地区已成为国际集装箱运输的核心区域。随着该地区各集装箱港口的发展,大家都在努力争夺新的国际航运中心的地位。与上海港直接竞争的是釜山港、神户港和高雄港。本文分析了三港以及上海港的有关情况,通过设置有关的港口国际竞争力的指标,对上述四个港口在软硬件方面的竞争情况作了比较。文章最后给出了港口动态竞争模型,通过对8该模型的建立,阐述了各港口应采取的竞争与合作战略。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号