共查询到20条相似文献，搜索用时 46 毫秒
1.
Dosso S.E. Yeremy M.L. Ozard J.M. Chapman N.R. 《Oceanic Engineering, IEEE Journal of》1993,18(3):232-239
A method for estimating properties of the ocean bottom such as bathymetry and geoacoustic parameters such as sound speed, density and attenuation, using matched-field inversion is considered. The inversion can be formulated as an optimization problem by assuming a discrete model of unknown parameters and a bounded search space for each parameter. The optimization then involves finding the set of parameter values which minimizes the mismatch between the measured acoustic field and modeled replica fields. Since the number of possible models can be extremely large, the method of simulated annealing, which provides an efficient optimization that avoids becoming trapped in suboptimal solutions, has been used. The matching fields are computed using a normal mode model. In inversions for range-dependent parameters, the adiabatic approximation is employed. This allows mode values to be precomputed for a grid of parameter values and stored in look-up tables for fast reference, which greatly improves computational efficiency. Synthetic inversion examples are presented for realistic range-independent and range-dependent environments 相似文献
2.
A method is described for the estimation of geoacoustic model parameters by the inversion of acoustic field data using a nonlinear optimization procedure based on simulated annealing. The cost function used by the algorithm is the Bartlett matched-field processor (MFP), which related the measured acoustic field with replica fields calculated by the SAFARI fast field program. Model parameters are perturbed randomly, and the algorithm searches the multidimensional parameter space of geoacoustic models to determine the parameter set that optimizes the output of the MFP. Convergence is driven by adaptively guiding the search to regions of the parameter space associated with above-average values of the MFP. The performance of the algorithm is demonstrated for a vertical line array in a shallow water enviornment where the bottom consists of homogeneous elastic solid layers. Simulated data are used to determine the limits on estimation performance due to error in experimental geometry and to noise contamination. The results indicate that reasonable estimates are obtained for moderate conditions of noise and uncertainty in experimental geometry 相似文献
3.
This paper presents an adaptive hybrid algorithm to invert ocean acoustic field measurements for seabed geoacoustic parameters. The inversion combines a global search (simulated annealing) and a local method (downhill simplex), employing an adaptive approach to control the trade off between random variation and gradient-based information in the inversion. The result is an efficient and effective algorithm that successfully navigates challenging parameter spaces including large numbers of local minima, strongly correlated parameters, and a wide range of parameter sensitivities. The algorithm is applied to a set of benchmark test cases, which includes inversion of simulated measurements with and without noise, and cases where the model parameterization is known and where the parameterization most be determined as part of the inversion. For accurate data, the adaptive inversion often produces a model with a Bartlett mismatch lower than the numerical error of the propagation model used to compute the replica fields. For noisy synthetic data, the inversion produces a model with a mismatch that is lower than that for the true parameters. Comparison with previous inversions indicates that the adaptive hybrid method provides the best results to date for the benchmark cases 相似文献
4.
5.
Matched-field inversion is used to, estimate geoacoustic properties from data obtained in an experiment with a vertical line array (VLA). The experiment was carried out using broad-band sources (shots) in water depths of about 200 m on the continental shelf off Vancouver Island. The data were processed to obtain spectral components of the field for frequencies near the bubble frequency for the shot. The ocean bottom in this region consists of a layer of mainly sandy sediments (about 100 m thick) overlying older consolidated material. Consequently, the inversion was designed to estimate the parameters of a two-layer elastic sediment model. In the inversion, an adaptive global search algorithm was used to investigate the multidimensional space of geoacoustic models in order to determine the set of values corresponding to the best replica field. Convergence is driven by adaptively guiding the search to regions of the parameter space associated with above-average values of the matched field correlation between the measured and replica fields. The geoacoustic profile estimated by the inversion consisted of a 125-m layer with compressional speed ~1700 m/s and shear speed ~400 m/s, overlying a layer with compressional speed ~1900 m/s. This model is consistent with the results from conventional seismic experiments carried out in the same region 相似文献
6.
基于Chirp数据和Biot-Stoll模型反演南海北部陆坡海底表层沉积物物理性质 总被引：1，自引：1，他引：0
浅地层剖面是基于声学信号(频率在几百至几千赫兹)在沉积物中的传播得到可反映沉积地层结构的数据，海底反射系数与沉积物物理性质密切相关。Biot-Stoll声波传播理论模型可以预测海底沉积物的物理性质，构建反射系数等声学参数与物理参数之间的关系，但在不同的海域采用不同的参数所获得的效果不同。为此，本文基于南海北部陆坡海底表层沉积物的实测物理参数，利用Biot-Stoll模型建立研究区海底反射系数和沉积物物理性质之间的关系，结果表明模型计算值与样品实测值吻合度总体较好，偏差在0.1%～4.9%之间，并建立了频率3.5 kHz时海底反射系数与沉积物孔隙度、密度、平均粒径之间的关系方程，且方程拟合度较高，可决系数R2均大于0.99。在对典型Chirp剖面数据计算其海底反射系数的基础上，反演了海底表层沉积物的孔隙度、密度、颗粒平均粒径等物理性质，其中反演孔隙度、密度、平均粒径与实测孔隙度、密度、平均粒径相对误差均小于5%，结果与实测值基本相符，表明该反演方法在南海北部陆坡区的应用是可行的。 相似文献
7.
Fialkowski L.T. Lingevitch J.F. Perkins J.S. Dacol D.K. Collins M.D. 《Oceanic Engineering, IEEE Journal of》2003,28(3):370-379
An efficient method for geoacoustic inversions in a range-dependent ocean waveguide is implemented and tested with synthetic data. This method combines a simulated annealing search with an optimal coordinate rotation that increases the efficiency of navigating parameter landscapes for which parameter coupling is important. The coordinate rotation associated with the parameter couplings also provides information about which parameters are resolvable for a particular inversion frequency and array geometry. Using this information, results from several single-frequency inversions can be combined to obtain an estimate for the sediment parameters. 相似文献
8.
海床式静力触探设备工作效率高,能够实现从垂向上对地层的连续探测,数据分辨率较好。通过对黄河口海域3个静力触探孔和1个地质钻孔的分析,将研究区20m以浅地层自上而下划分为粉土、粉质黏土、粉土夹粉砂或粉砂、粉质黏土、粉土五层,静力触探曲线对粉土层中的硬壳层和粉质黏土层中的贝壳夹层等特殊地质现象有很好的反映。对粉质黏土的静力触探参数与物理力学参数进行相关性分析,得到适合该区域的回归方程。采用基于CPT数据的液化判别法,对研究区表层粉土液化可能性进行评判,通过Seed简化法计算的周期应力比(CSR)与Olsen法计算的周期阻力比(CRR)的大小比较,得出当抗震设防烈度为7度时,研究区表层粉土不会液化,当抗震设防烈度为8度时,粉土层将发生液化,计算最大液化深度3.7m。 相似文献
9.
海底浅表层（小于1 m）沉积物的物理性质,如粒度、孔隙度、密度等是海洋沉积学研究和海洋工程地质分析的重要内容,目前主要基于有限的海底取样或原位测试获取这些沉积物的物理性质。浅地层剖面是基于声学信号（频率几千赫兹）在沉积物中的传播得到可反映沉积地层结构的数据,其中的一些声学参数,如海底反射系数、波阻抗等与沉积物物理性质密切相关。如何充分而有效地利用浅地层剖面资料,反演得到剖面覆盖区海底浅表层沉积物的物理性质参数,极具科学意义和应用价值,且基于声学属性反演沉积物物理性质是当前研究的热点。为此,本文基于渤海LD16-3CEPA至LD10-1PAPD路由段的浅地层剖面数据和海底表层沉积物的实测物理参数,利用Biot-Stoll模型建立研究区海底反射系数和沉积物物理性质之间的关系,并基于浅地层剖面数据计算得到的海底反射系数,反演了研究区海底浅表层沉积物的孔隙度、密度、平均粒径等物理性质参数。其中反演的孔隙度、密度、平均粒径与实测孔隙度、密度、平均粒径基本相符,偏差度基本都在20%的偏差范围内,表明该反演方法在该区的应用是可行的。 相似文献
10.
The wave dispersion equation has played a very important role in the development of ocean surface wave theories. The evaluation of the length of a water wave is an essential example of solving the dispersion relation. Conventional ocean wave theories have been based on an assumption of a rigid impermeable seabed. Thus, the conventional wave dispersion equation can only be used in the case of a wave propagating over a rigid impermeable seabed. For waves propagating over a porous seabed (such as a sandy bed), the conventional dispersion relation is no longer valid because of the absence of the characteristics of the porous seabed. The objective of this study is to establish a new wave dispersion equation for waves propagating over a porous seabed. Based on the new relation, the effects of a porous seabed on wave characteristics (such as the wavelength and wave profile) are discussed in detail. 相似文献
11.
《Oceanic Engineering, IEEE Journal of》2009,34(1):51-62
12.
Wave-induced seabed instability, either momentary liquefaction or shear failure, is an important topic in ocean and coastal engineering. Many factors, such as seabed properties and wave parameters, affect the seabed instability. A non-dimensional parameter is proposed in this paper to evaluate the occurrence of momentary liquefaction. This parameter includes the properties of the soil and the wave. The determination of the wave-induced liquefaction depth is also suggested based on this non-dimensional parameter. As an example, a two-dimensional seabed with finite thickness is numerically treated with the EFGM meshless method developed early for wave-induced seabed responses. Parametric study is carried out to investigate the effect of wavelength, compressibility of pore fluid, permeability and stiffness of porous media, and variable stiffness with depth on the seabed response with three criteria for liquefaction. It is found that this non-dimensional parameter is a good index for identifying the momentary liquefaction qualitatively, and the criterion of liquefaction with seepage force can be used to predict the deepest liquefaction depth. 相似文献
13.
高分辨率SAR中,桥梁的各次反射回波表现为条带状,这给桥梁参数的反演带来了困难。本文提出了一种适用于高分辨率全极化SAR的水上桥梁参数反演方法。首先,通过极化散射特征区分出桥梁的单次、二次和三次反射回波目标。然后,结合微波反射和折射的原理,分析了高分辨SAR图像中桥梁的各次反射回波成条带状的原因,在此基础上提出了各次回波目标的提取方法和桥梁参数反演方法。最后,利用获取的AIRSAR数据反演了桥梁的上下桥高、桥厚、桥宽、桥长及桥塔高度等参数,通过与实测数据对比,结果表明,本文的方法能较准确地反演桥梁的各项参数,其中桥高误差仅为1.3%,结果也表明了在高分辨率条件下,C和L波段的桥梁参数反演能力相当。 相似文献
14.
为研究海洋环境信号在OBS(Ocean Bottom Seismograph)原始数据中的规律及应用,根据OBS原始数据的波形及频谱特征,将研究区划分为5个时间段,依次为旧涌浪阶段、风浪渐强阶段、风浪全盛阶段、风浪消退阶段和新涌浪阶段。结合海洋天气预报,认为上述现象是由偏南风风浪对海流的影响造成的。参考野外地震数据采集记录班报,得到各阶段的时长和距离,计算风浪渐强、全盛和消退阶段OBS附近海流的平均速度。结果表明:OBS原始资料中浅海海洋环境噪音增强的主要因素是风浪,且风浪引起的噪音信号的波形变化特征是渐进式的;OBS可用于接收某种特殊阶段(如台风、海啸等)的噪音信号,并根据噪音信号的波形特征、频谱变化规律和持续时间估算该阶段的海流速度变化。 相似文献
15.
16.
基于线性势流理论,利用高阶边界元法研究了规则波在三维局部渗透海床上的传播。根据Darcy渗透定律推导出渗透海床的控制方程,利用渗透海床顶部和海底处法向速度和压强连续条件得到渗透海床顶部满足的边界条件。根据绕射理论,利用满足自由水面条件的格林函数建立了求解渗透海床绕射势的边界积分方程,采用高阶边界元方法求解边界积分方程进而得到自由水面的绕射势和波浪在局部渗透海床上传播过程中幅值的变化情况。通过与已发表的波浪对圆柱形暗礁的时域全绕射结果对比,证明了本文建立的频域方法计算波幅的正确性和有效性。利用这一模型研究了三维矩形渗透海床区域上波浪的传播特性,并分析了入射波波长、海床渗透特性系数等参数对波浪传播的影响。 相似文献
17.
浪向代表着海浪传播方向，它是海上交通安全以及海岸资源管理的重要海洋环境参数之一。本文针对X波段测波雷达对海杂波的连续成像，提出了一种基于光流法的海浪传播方向反演新方法。该方法利用X波段测波雷达接收的海面回波图像序列直接进行光流运动估计，将得到的每个像素点的运动矢量进行加权平均，最后得到实际的海浪传播方向。与传统基于频域的X波段测波雷达浪向反演方法相比，本文提出的方法直接从时域来进行回波信号处理，无需提前得到调制传递函数以及精确的海流，减少了由于海流估算的不准确以及调制传递函数选取的误差而给雷达浪向反演带来的影响。同时，该方法简单高效，占用资源少，将其应用至仿真雷达回波以及现场实测数据来进行浪向反演，反演得到的浪向与仿真设定浪向值以及浮标实时观测浪向结果都有很好的吻合度，变化趋势也完全一致，进而验证了该方法的有效性以及准确性。 相似文献
18.
Conventional bearing estimation procedures employ planewave steering vectors as replicas of the true field and seek to resolve in angle by maximizing a power function representing the agreement between actual and replica fields. For vertical arrays in oceanic waveguides the received field depends on range and depth, and it is natural to replace the "look-direction" (theta ) by a "look-position" (r, z ). Thus an environmental model is constructed by specifying ocean depth, sound speed profile, bottom properties, etc., and a propagation model is employed to construct a replica of the field that would be received on the array for a particular source position. The usual estimators (e.g., Bartlett or maximum likelihood) are then used to gauge the agreement between actual and replica fields and the true source position is identified as that position where the agreement is best. The performance of this kind of matched-field processing is strongly affected by the environment. In particular, we demonstrate through simulations that for a deep-water Pacific environment dominated by waterborne paths, ambiguities or sidelobes are associated with convergence zones. In the absence of mismatch between replica and actual fields we find that a 16-element array performs extremely well in low-frequency regimes. Mismatch caused by uncertainties in phone positions, bottom parameters, ocean sound speed, surface and bottom roughness, etc., causes degradation in localization performance. The impact of some of these effects on conventional and maximum likelihood estimators is examined through simulation. 相似文献
19.
20.
Matched-fieId inversion (MFI) undertakes to estimate the geometric and geoacoustic parameters in an ocean acoustic scenario by matching acoustic field data recorded at hydrophone array with numerical calculations of the field. The model which provides the best fit to the data is the estimate of the actual experimental scenario. MFI provides a comparatively inexpensive method for estimating ocean bottom parameters over an extensive area. The basic components of the inversion process are a sound propagation model and matching (minimization) algorithm. Since a typical MFI problem requires a large number of computationally intensive sound propagation calculations, both of these components have to be efficient. In this study, a hybrid inversion algorithm which uses a parabolic equation propagation model and combines the downhill simplex algorithm with genetic algorithms is introduced. The algorithm is demonstrated on synthetic range-dependent shallow-water data generated using the parabolic equation propagation model. The performance for estimating the model parameters is compared for realistic signal-to-noise ratios in the synthetic data 相似文献