共查询到20条相似文献，搜索用时 46 毫秒
1.
大叶藻海草床的退化和恢复受到国内外学者的广泛关注,而大叶藻种子萌发则是恢复实践中的一项关键技术。为了提高大叶藻种子萌发率,本研究在实验室可控条件下,采用正交实验对影响大叶藻种子萌发的环境因素(盐度、温度、N/P营养盐浓度及p H)进行了优化,并在优化条件下进一步探究了光质类型、UV-B辐射、低温层积和划破种皮对大叶藻种子萌发和平均萌发时间的影响。结果表明:盐度12、温度10°C、N/P营养盐浓度960/60μmol/L、p H 6.2是大叶藻种子相对适宜的萌发条件组合;黑暗条件下大叶藻种子萌发率最高,为92%,不同类型光质照射不促进大叶藻种子萌发率的提高,但红光照射可在短期内加速种子萌发;在一定强度范围内,种子萌发率随UV-B辐射时长的增加而升高,每日辐射8h,处理8周后种子萌发率可达93%。划破种皮和低温层积均可显著提高大叶藻种子的萌发率并缩短平均萌发时间,经划破种皮处理后,2周内种子萌发率可提高至91%。 相似文献
2.
3.
《中国海洋大学学报(自然科学版)》2017,(5)
大叶藻(Zostera marina L.)是全球分布最广泛的海草之一,曾在山东半岛沿海有广泛分布。然而,自1980年代开始,受自然因素和人类活动的影响,大叶藻场严重衰退,导致黄海近岸海洋生态系统恶化,渔业资源锐减。本研究以中国黄海海域(山东半岛)大叶藻为研究对象,研究不同温度、春化作用时间对大叶藻种子萌发和不同播种深度对种子成苗率的影响,进行了幼苗培育,研制开发幼苗移栽装置和技术。结果表明:春化处理温度对大叶藻种子萌发率具有显著影响(p0.01),4℃春化处理50d的大叶藻种子萌发率最高,平均达55.3%;埋植深度对大叶藻种子萌发率和幼苗成苗率有影响,埋植深度0.5~2.5cm时大叶藻幼苗的出苗率相似,但显著高于埋植深度3~4.5cm的成苗率(p0.01)。依据这些研究结果,成功培育大叶藻苗7.6万株,生长110d,平均幼苗长度达16.3cm,最大长度达22cm;研制了育苗杯大叶藻苗移栽装置,实现了从水面高效栽植大叶藻幼苗。 相似文献
4.
5.
6.
7.
对虾池立体混养贝类的养殖技术 总被引：4，自引：1，他引：4
浙江省普陀区于1985年开始进行对虾池立体混养贝类试验。其面积为52亩(1亩=666.6m_2,后同),1986年面积增加到830亩。试验结果表明,立体混养虾池对虾每亩可增产10kg,12cm规格对虾产量提高5～8％。每亩还能增收其他副产值400～600元。 相似文献
8.
中国科学院海洋研究所在室內大水槽培育大叶藻幼苗吋发现,大叶藻在夏季水温超过28℃时仍正常存活;海区的观察也证明,自然海区生长的大叶藻植株在夏季高温期仍生长正常。大叶藻(Zostera marina)为海草的一种,可以靠地下茎的营养繁殖不断长出新植株,因而能在山东省沿海一些泥沙底质的海区形成以 相似文献
9.
大叶藻移植方法的研究 总被引：1，自引：0，他引：1
为探索适宜的大叶藻(Zostera marina)移植修复方法,2008年10～11月,利用沉子法、枚钉法、直插法、夹苗法和整理箱法,在山东荣成俚岛近岸海域进行了大叶藻移植试验,监测了移植后1个月内大叶藻的生长、存活与渗透压的变化,比较了天然大叶藻和移植大叶藻之间的差异,并分析了移植海区主要环境因子与大叶藻生长与存活之间的关系。结果显示,5种移植方法大叶藻的平均存活率为沉子法(100%)>枚钉法(86.7%)>直插法(66.7%)>夹苗法(20%)>整理箱法(0%);移植大叶藻的平均绝对生长率为沉子法(0.358 cm/d)>直插法(0.242 cm/d)>对照组(0.211 cm/d)>枚钉法(0.083 cm/d)>夹苗法(0.067 cm/d);与天然大叶藻相比,移植后大叶藻根的渗透压显著升高,而茎和叶的渗透压则显著降低(P<0.01);移植后大叶藻的生长与存活和移植海区水流、光照、底质等主要环境因子显著相关。研究结果为研发适宜的低成本大叶藻受损生物群落生态修复技术提供了参考。 相似文献
10.
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
16.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献
20.