首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 421 毫秒
1.
Bed topography and grain size are predicted for steady, uniform flow in circular bends by consideration of the balance of fluid, gravity and frictional forces acting on bed load particles. Uniform flow pattern is adequately described by conventional hydraulic equations, with bed shear defined as that effectively acting on bed load grains. This analysis is used as a basis to predict bed topography and grain size for steady, non-uniform flow in non-circular bends (represented by a ‘sine-generated’ curve). The non-uniform flow pattern is calculated using the method of Engelund (1974a). Equilibrium bed form, hence sedimentary structure, is found by comparison of existing flow conditions with one of the schemes describing the hydraulic stability limits of the various bed forms. The model was compared with bankfull flow observations from a channel bend on the River South Esk, Scotland. Theoretical bed topography and velocity distribution were very close to the observed data. However, bed shear stress showed only a broad agreement, probably because of the use a constant friction coefficient value. Mean grain size distribution showed good agreement, but theory did not account adequately for gravel sizes in the talweg region and on the upstream, inner part of the bar, possibly due to theoretical underestimation of effective bed shear. Bed form and sedimentary structure are predicted well using the familiar stream power-grain size scheme. The behaviour of the model under unsteady uniform flow conditions in circular bends was analyzed, and suggests that any variation of grain size and bed topography with stage is likely to be limited to deeper parts of the channel.  相似文献   

2.
A cellular automata model of surface water flow   总被引：1，自引：0，他引：1  
Previous cellular automata models of surface water flow have been constructed to reflect steady, gradually‐varied flow conditions. While these models are extremely important in showing the near‐equilibrium forms that result from the interactions of water and boundary material, highly dynamic forms and processes require models that represent unsteady flow conditions. In order to simulate unsteady flow in a cellular model of surface water flow, the conservation of mass and the Manning's equations are coupled with an algorithm to delay the movement of water from one pixel to the next until the correct timing is reached. This approach yields highly realistic flood wave hydrographs when compared with flood observations in the Walnut Gulch Experiment Watershed. Coupling this unsteady flow model with simple laws of sediment erosion, transport, and deposition should allow event‐based simulations of watershed and river channel geomorphologic change. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

3.
1 INTRODUCTION Flow and sediment transport in natural rivers are generally unsteady, and exhibit temporal and spatial lags. Traditionally, in most hydraulic engineering problems the unsteady flow and sediment transport are approximately treated as steady …  相似文献   

4.
IINTRODUCTIONDependingonflowandoperatingconditions,navigationtrafficmaycausesignificantresuspensionofdepositedsediment.Jnanumberofsituationsresuspensionofdepositedsedimentcanhavesevereenvironmentalrepercussions.Forinstance,ifthesedimentcontainscontaminants,thecontaminantsmaybereentrainedwiththesediment,taintingthewaterquality(Erdmannetal.,1994).Inothersituations,..evedincreasesintheamountofcleansuspendedsedimentcanbedetrimentalforaquaticplantsandanimals(Garcfaetal.,1998).Inordertoassesst…  相似文献   

5.
In this paper a modelling approach is presented to predict local scour under time varying flow conditions. The approach is validated using experimental data of unsteady scour at bed sills. The model is based on a number of hypotheses concerning the characteristics of the flow hydrograph, the temporal evolution of the scour and the geometry of the scour hole. A key assumption is that, at any time, the scour depth evolves at the same rate as in an equivalent steady flow. The assumption is supported by existing evidence of geometrical affinity and similarity of scour holes formed under different steady hydraulic conditions. Experimental data are presented that show the scour hole development downstream of bed sills due to flood hydrographs follow a predictable pattern. Numerical simulations are performed with the same input parameters used in the experimental tests but with no post‐simulation calibration. Comparison between the experimental and model results indicates good correspondence, especially in the rising limb of the flow hydrograph. This suggests that the underlying assumptions used in the modelling approach are appropriate. In principle, the approach is general and can be applied to a wide range of environments (e.g. bed sills, step‐pool systems) in which scouring at rapid bed elevation changes caused by time varying flows occurs, provided appropriate scaling information is available, and the scour response to steady flow conditions can be estimated. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

6.
Gravel-bed rivers characteristically exhibit shallow riffles in wide sections and deeper pools where the channel becomes constricted and narrow. While rivers can adjust to changing flow and sediment supply through some combination of adjustments of channel slope, bed-surface sorting, and channel shape, the degree to which riffle-pools may adopt these changes in response to changing flows and sediment supplies remains unclear. This article presents results from a flume experiment investigating how constant- and variable-width channels adjust their morphology in response to changing flow and increased sediment supply. Two flume geometries were used: (1) constant-width and (2) variable-width, characterized by a sinusoidal pattern with a mean width equal to that of the first channel. The variable-width channel developed bed undulations in phase with the width, representing riffle-pools. The experiment consisted of three phases for each flume geometry: (1) steady flow, constant sediment supply; (2) unsteady flow, constant sediment supply; and (3) unsteady flow, doubled sediment supply. Unsteady flow was implemented in the form of repeated symmetrical stepped hydrographs, with a mean discharge equal to that in the steady flow phase. In all phases the bed and sediment supply were composed of a sand/gravel mixture ranging from 1 to 8 mm. In both the straight and variable-width channels, transitioning from steady flow to repeated hydrographs did not result in significant changes in bed morphology. The two channel geometries had different responses to increased sediment supply: the slope of the straight channel increased nearly 40%, while the variable-width channel reduced the relief between bars and pools and decreased the variability in cross-sectional elevation with a slight slope increase. Bar-pool relief varied with repeat discharge hydrographs. Pool elevation changed twice the distance of bar elevations, emphasizing the relevance of pool scour for riffle-pool self-maintenance in channels with width variations.  相似文献   

7.
Acquiring high resolution topographic data of natural gravel surfaces is technically demanding in locations where the bed is not exposed at low water stages. Often the most geomorphologically active surfaces are permanently submerged. Gravel beds are spatially variable and measurement of their detailed structure and particle sizes is essential for understanding the interaction of bed roughness with near‐bed flow hydraulics, sediment entrainment, transport and deposition processes, as well as providing insights into the ecological responses to these processes. This paper presents patch‐scale laboratory and field experiments to demonstrate that through‐water terrestrial laser scanning (TLS) has the potential to provide high resolution digital elevation models of submerged gravel beds with enough detail to depict individual grains and small‐scale forms. The resulting point cloud data requires correction for refraction before registration. Preliminary validation shows that patch‐scale TLS through 200 mm of water introduces a mean error of less than 5 mm under ideal conditions. Point precision is not adversely affected by the water column. The resulting DEMs can be embedded seamlessly within larger sub‐aerial reach‐scale surveys and can be acquired alongside flow measurements to examine the effects of three‐dimensional surface geometry on turbulent flow fields and their interaction with instream ecology dynamics. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

8.
Exceptional flood events with a return period of about 50 years can be destructive to step-pool channel segments. However, field investigations and flume experiments have not examined the hydraulic and morphological feedbacks of step-pool morphology during unsteady hydrographs of exceptional flood events. We performed a series of flume experiments with a manually constructed step model, perturbed with three hydrographs that varied in the rate of water supply change. The bed texture, topography, flow regimes, surface flow field and water depth were characterized and measured as the flow rate was increased during the experiments. A distinct pool feature emerged downstream of the manually constructed step when the flow rate exceeded the threshold scaled to the peaks of ordinary flood events in well-graded mountain streams. The pool feature was modified in several different ways with flow rate increase. The bed surface steadily coarsened, micro-bedforms developed and became more pronounced, the bed topography became more spatially complex based on analysis using the Hurst exponent, and last, pool depth steadily increased. Pool modification was also linked to the flow regime: the impinging jet regime led to grain size segmentation in the pool while the jump regime contributed to decelerating flow velocity. The steeper rising limb of hydrograph led to a less developed pool feature, with smaller sized micro-bedforms in the pool bottom to outlet, and higher discharge threshold for distinct coarsening and scouring in the pool. The estimated energy dissipation within the step-pool unit decreased as a power function from low to high flow, quantified as the ratio hc/HS, where hc is the critical water depth and HS is scour depth. Our results highlight the interaction between morphology, hydraulics, and energy dissipation of step-pool unit and the crucial role of hydrograph shape on the interaction during flow increase © 2019 John Wiley & Sons, Ltd.  相似文献   

9.
This study investigates the fluvial dynamics of straight natural stream channels. In particular, this experimental field study quantitatively assesses a physically based non-linear mathematical theory of alternate bar formation under unsteady natural flow conditions within a straight alluvial stream. The study site is an artificially straightened section of the Embarras River located approximately 16 km south of Champaign, Illinois. Data were collected on channel form, gradient, alternate bar dimensions, bed sediment size and flow stage over a 2 year study period. Both linear and non-linear steady flow hydrodynamic theories suggest that alternate bars are critical to the process of meander development. But these theories do not predict bar development for unsteady flow conditions, which typically occur in natural alluvial channels. Tubino (1991) suggests that bar evolution for a flood hydrograph can be divided into three parts: (1) a period of limited bar growth during the rising stage of the flood; (2) a stage of modest bar decay near the peak of the flood; and (3) a stage of non-linear bar growth during the prolonged falling stage of the flood. Bars developed during the falling limb of a hydrograph, and exhibited sequential development rather than the uniform growth along the reach predicted by Tubino's model. As flow stage decreased, short, low, fine-grained bars were superimposed on long, high and coarser-grained bars that developed under preceding high flow stages. These results suggest that the process of bar formation in artificially straightened natural streams with heterogeneous bed material may occur under different flow conditions and in a different manner than predicted by theoretical models. Further work should focus on attempting to isolate the physical mechanisms responsible for alternate bar formation in straight natural streams with heterogeneous bed material and flashy hydrologic flow regimes.  相似文献   

10.
Laboratory observations and computational results for the response of bedform fields to rapid variations in discharge are compared and discussed. The simple case considered here begins with a relatively low discharge over a flat bed on which bedforms are initiated, followed by a short high‐flow period with double the original discharge, during which the morphology of the bedforms adjusts, followed in turn by a relatively long period of the original low discharge. For the grain size and hydraulic conditions selected, the Froude number remains subcritical during the experiment, and sediment moves predominantly as bedload. Observations show rapid development of quasi‐two‐dimensional bedforms during the initial period of low flow with increasing wavelength and height over the initial low‐flow period. When the flow increases, the bedforms rapidly increase in wavelength and height, as expected from other empirical results. When the flow decreases back to the original discharge, the height of the bedforms quickly decreases in response, but the wavelength decreases much more slowly. Computational results using an unsteady two‐dimensional flow model coupled to a disequilibrium bedload transport model for the same conditions simulate the formation and initial growth of the bedforms fairly accurately and also predict an increase in dimensions during the high‐flow period. However, the computational model predicts a much slower rate of wavelength increase, and also performs less accurately during the final low‐flow period, where the wavelength remains essentially constant, rather than decreasing. In addition, the numerical results show less variability in bedform wavelength and height than the measured values; the bedform shape is also somewhat different. Based on observations, these discrepancies may result from the simplified model for sediment particle step lengths used in the computational approach. Experiments show that the particle step length varies spatially and temporally over the bedforms during the evolution process. Assuming a constant value for the step length neglects the role of flow alterations in the bedload sediment‐transport process, which appears to result in predicted bedform wavelength changes smaller than those observed. However, observations also suggest that three‐dimensional effects play at least some role in the decrease of bedform wavelength, so incorporating better models for particle hop lengths alone may not be sufficient to improve model predictions. Published in 2011. This article is a US Government work and is in the public domain in the USA.  相似文献   

11.
Active bed forms of three major classes are formed in Terek lower reaches during summer floods. They include ripples, dunes of the first order, and dunes of the second order (from smaller to larger), which commonly form an incomplete hierarchy. The morphology of the bed forms is essentially stochastic and can be adequately described by probability distribution functions of bed form characteristics for some narrow ranges of hydraulic flow characteristics. At the same time, the mean values of bed form morphometric characteristics (length, height, and asymmetry) show stable relationships with flow velocity and depth. The celerity of active dunes can be adequately described by a modified Snishchenko–Kopaliani formula. The channelforming sediments that move as bed forms in Terek lower reaches account for 7% of sediment transport rate of all channel-forming sediments, a value near the lower limit for rivers with sand alluvium.  相似文献   

12.
Laboratory flume experiments were done to investigate bed load sediment transport by both steady and unsteady flows in a degrading channel. The bed, respectively composed of uniform sand, uniform gravel, or sand-gravel mixtures, always undergoes bulk degradation. It is found that both uniform and non-uniform bed load transport is enhanced greatly by unsteady flows as compared to their volume-equivalent steady flows. This enhancement effect is evaluated by means of an enhancement factor, which is shown to be larger with a coarser bed and lower discharges. Also, the fractional transport rates of gravel and sand in non-uniform sand-gravel mixtures are compared with their uniform counterparts under both steady and unsteady flows. The sand is found to be able to greatly promote the transport of gravel, whilst the gravel considerably hinders the transport of sand. Particularly, the promoting and hindering impacts are more pronounced at lower discharges and tend to be weakened by flow unsteadiness.  相似文献   

13.
Field experiments were conducted on bed load transport in the Diaoga River, a mountain stream in southwest China, to study the variation of bed load transport with varying sediment supply. The rate of bed load transport is greatly affected by incoming sediment （load and size）. Under the same flow conditions, bed load transport rates may differ by three orders of magnitude depending on whether measurements were taken before or after the first flood of the year. The relation of the ＂bed load transport rate versus flow intensity＂ appears to have similar characteristics as a clockwise looped-rating curve. Experiments also were conducted during the non-flood season to study bed load transport processes with different incoming load from an upstream section. Bed load with different sizes can be grouped into two types： traveling bed load and structural bed load. Traveling bed load is composed of sediment finer than a critical size, De, and its transport rate depends mainly on the incoming sediment rate. The incoming sediment rate can alter the rate of bed load transport by three orders of magnitude. Structural bed load is composed of coarser sediment and its transport rate closely relies on the flow intensity.  相似文献   

14.
《国际泥沙研究》2016,(3):271-278
In order to assess the dynamics of rivers, a reliable characterization of bedload transport particularly during unsteady flow regimes is required. In contrast to highly energetic cases in hillslope areas, we aim to answer the question whether the usage of acoustic measurements can improve the characterization of bedload in small rivers draining low land mountains with comparatively low water discharge and bedload. In addition to the investigation of natural flood events, controlled floods were generated by releasing water from a reservoir into a small gravel-bed stream. The controlled releases allow for an evaluation of bedload solely from channel storage or bank erosion. For acoustical in-situ characterization of bedload transport, hydrophones were mounted onto the bottom side of steel plates, thus recording the impacts of sediments via the acoustic vibrations on the surface of the plates while at the same time minimizing the disturbing noise resulting from water turbulence. Corresponding bedload traps are removable boxes with open lids fixed in the riverbed so that bedload material registered by the hydrophone is trapped. The acoustic signals correlate well with the quantity of the transported material. During summer flood events the highest transport rates occur at the beginning of the rising limb fea-turing clockwise hysteresis. This is due to the rising transport energy of the flow and the presence of loose, unconsolidated material. During typical winter flood events bedload shows anticlockwise loops. The intensification of bedload conveyance after the runoff peak can be explained by a decreasing stability of the bed material from the beginning to the end of a transport event. Anticlockwise behavior also results from a combination of bedload exhaustion in the vicinity of the monitoring station with a delayed arrival of new material from distal sources later in the hydrograph.  相似文献   

15.
Solute transport in rivers is controlled by surface hydrodynamics and by mass exchanges with distinct retention zones. Surface and hyporheic retention processes can be accounted for separately in solute transport models with multiple storage compartments. In the simplest two component model, short term storage can be associated to in-channel transient retention, e.g. produced by riparian vegetation or surface dead zones, and the long-term storage can be associated to hyporheic exchange. The STIR (Solute Transport In Rivers) multiple domain transport model is applied here to tracer test data from three very different Mediterranean streams with distinctive characteristics in terms of flow discharge, vegetation and substrate material. The model is used with an exponential residence time distribution (RTD) to represent surface storage processes and two distinct modeling closures are tested to simulate hyporheic retention: a second exponential RTD and a power-law distribution approximating a known solution for bedform-induced hyporheic exchange. Each stream shows distinct retention patterns characterized by different timescales of the storage time distribution. Both modeling closures lead to very good approximations of the observed breakthrough curves in the two rivers with permeable bed exposed to the flow, where hyporheic flows are expected to occur. In the one case where the occurrence of hyporheic flows is inhibited by bottom vegetation, only the two exponential RTD model is acceptable and the time scales of the two components are of the same magnitude. The significant finding of this work is the recognition of a strong signature of the river properties on tracer data and the evidence of the ability of multiple-component models to describe individual stream responses. This evidence may open a new perspective in river contamination studies, where rivers could possibly be classified based on their ability to trap and release pollutants.  相似文献   

16.
Data from a flume experiment were used to explore the modified hydraulic conditions and habitat suitability in streams where feeding of large woody debris (LWD) is present. Feeding of LWD was simulated by insertion of wood dowels with varying diameter and length. Two processes were mimicked, namely (i) lumped LWD load, and (ii) distributed LWD load. Lumped load may occur for wood coming either from upstream or from a tributary, and entering the stream of interest in one only section. Distributed load occurs for wood entering along the considered stream, in several sections. Distributed wood income resulted in homogeneously increased bed roughness, leading to increased flow depth and decreased velocity, whereas lumped input of wood from upstream resulted in larger local clustering and change of the flow properties, but with less influence on the distributed hydraulic properties. A method is proposed to predict bulk flow properties in presence of LWD. Then, a simple approach is used based upon the concept of wetter usable area WUA to investigate modified habitat conditions for fish species in presence of woody debris. An application to a real world case study from the literature is then shown, where increasing density of wood increases habitat availability for colonization by fish guilds.  相似文献   

17.
A 2D depth-averaged model for hydrodynamic,sediment transport and river morphological adjustment is presented.The sediment transport submodel considers non-uniform sediment,bed surface armoring,impact of secondary flow on the direction of bed-load transport,and transverse slope of river bed.The bank erosion submodel incorporates a simple simulation method for updating bank geometry during either degradational or aggradational bed evolution.The model is applied to a 180°bend with a constant radius under unsteady flow conditions,and to Friedkin’s laboratory meander channels.The results are in acceptable agreement with measurements,confirming the two dimensional model’s potential in predicting the formation of river meandering and improving understanding of patterning processes.Future researches are needed to clarify some simplifications and limitations of the model.  相似文献   

18.
Only comparatively few experimental studies have been carried out to investigate the performance of the HEC-6 river morphological model. The model was developed by the Hydrologic Engineering Center of the US Army Corps of Engineers. In this study, experiments were carried out in a 20 m long concrete flume 0.6 m wide with varying rectangular cross-sections. The channel bed is paved with uniform sand of D50 = 0.9 mm and D90 = 1.2 mm within the test reach of 12 m. Two types of experiments were carried out with sediment transport, one under steady uniform flow and another under steady non-uniform flow conditions. Nine steady uniform flow experiments were carried out to compare the measured equilibrium relationship of flow and sediment transport rate with two bedload formulae, namely, Du Boys and Meyer–Peter and Muller, and with three total load formulae, namely, Toffaleti, Laursen and Yang. It was found that even though the sediment transport consists of a certain portion of bedload, the total load formulae give satisfactory results and better agreement than the two bedload formulae. Five steady non-uniform flow experiments were carried out under various conditions of varying bed profile and channel width and also with sediment addition and withdrawal. The measured transient water surface and bed profiles are compared with the computed results from the HEC-6 model. It was found that the Toffaleti and Yang total load formulae used in the HEC-6 model give the most satisfactory prediction of actual bed profiles under various conditions of non-uniform flow and sediment transport. The effects of Manning's n, variations of sediment inflow, various sediment transport formulae, sediment grain size and the model numerical parameters, i.e. distance interval Δx and numerical weighting factor, on the computed water surface and bed profiles were determined. It was found that the selection of the sediment transport formulae has the most significant effect on the computed results. It can be concluded that the HEC-6 model can predict satisfactorily a long-term average pattern of local scour and deposition along a channel with either a small abrupt change in geometry or gradually varying cross-sections. However, the accuracy of the model prediction is reduced in the regions where highly non-uniform flow occurs.  相似文献   

19.
The fluid-structure interaction curvilinear immersed boundary (FSI-CURVIB) numerical method of Borazjani et al. [3] is extended to simulate coupled flow and sediment transport phenomena in turbulent open-channel flows. The mobile channel bed is discretized with an unstructured triangular mesh and is treated as a sharp-interface immersed boundary embedded in a background curvilinear mesh used to discretize the general channel outline. The unsteady Reynolds-averaged Navier-Stokes (URANS) equations closed with the k − ω turbulence model are solved numerically on a hybrid staggered/non-staggered grid using a second-order accurate fractional step method. The bed deformation is calculated by solving the sediment continuity equation in the bed-load layer using an unstructured, finite-volume formulation that is consistent with the CURVIB framework. Both the first-order upwind and the higher-order hybrid GAMMA schemes [12] are implemented to discretize the bed-load flux gradients and their relative accuracy is evaluated through a systematic grid refinement study. The GAMMA scheme is employed in conjunction with a sand-slide algorithm for limiting the bed slope at locations where the material angle of repose condition is violated. The flow and bed deformation equations are coupled using the partitioned loose-coupling FSI-CURVIB approach [3]. The hydrodynamic module of the method is validated by applying it to simulate the flow in an 180° open-channel bend with fixed bed. To demonstrate the ability of the model to simulate bed morphodynamics and evaluate its accuracy, we apply it to calculate turbulent flow through two mobile-bed open channels, with 90° and 135° bends, respectively, for which experimental measurements are available.  相似文献   

20.
The effect of the interplay between unsteady flow and bedform in a flood event on nitrogen cycling in the hyporheic zone (HZ) remains poorly understood. In this study, a reactive transport groundwater model with different flood hydrographs was proposed to investigate the effect of modified hyporheic flow on nitrate dynamics in the HZ, including nitrate source-sink function, response to the single-peak flood event and removal efficiency. The results demonstrate that there exists an optimal range of river channel gradients that could enhance the biogeochemical reactions (respiration, nitrification and denitrification) in a flood event. The HZ acts as a nitrate sink especially after the flood event, and its source-sink function is independent of the unsteady discharge/stage conditions. The nitrate in the HZ has a hysteretic response to peak stage/discharge, and its removal efficiency is decreased by up to 70% compared to steady flow conditions. These findings not only provide a better understanding of nitrogen dynamics under the effect of unsteady channel flow, but also can be applied for river restoration to efficiently remove nitrate in the HZ by modifying river channel gradients.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号