共查询到20条相似文献，搜索用时 234 毫秒
1.
本文提出-种利用有偏VSP资料反射波旅行时信息重建椭圆各向异性介质中水平向与垂直向速度的方法。其中,地下介质假定为层状椭圆各向异性介质。反射波旅行时间采用射线追踪理论及几何关系计算得到,反演中的线性方程组采用奇异值分解(SVD)技术进行求解。 方法检测时,我们对各向同性介质及椭圆各向异胜介质情况下有限差分法正演模拟的深井有偏移距VSP地震资料分别进行各向同性和各向异性方法反演成像。结果表明,本文所述方法较之各向同性介质模型反演方法对介质类型有很好的适用性,同时也说明了本方法的司行性。最后,我们分别介绍了对实际有偏VSP资料反演得到的地下介质的速度结构图像。 相似文献
2.
Emil Blias 《Geophysical Prospecting》2012,60(6):1054-1067
This paper presents a new explicit method for the estimation of layered vertical transverse isotropic (VTI) anisotropic parameters from walkaway VSP data. This method is based on Dix‐type normal moveout (NMO) inversion. To estimate interval anisotropic parameters above a receiver array, the method uses time arrivals of surface‐related double‐reflected downgoing waves. A three‐term NMO approximation function is used to estimate NMO velocity and a non‐hyperbolic parameter. Assuming the vertical velocity is known from zero‐offset VSP data, Dix‐type inversion is applied to estimate the layered Thomsen anisotropic parameters ?, δ above the receivers array. Model results show reasonable accuracy for estimates through Dix‐type inversion. Results also show that in many cases we can neglect the influence of the velocity gradient on anisotropy estimates. First breaks are used to estimate anisotropic parameters within the walkaway receiver interval. Analytical uncertainty analysis is performed to NMO parameter estimates. Its conclusions are confirmed by modelling. 相似文献
3.
C.M. Sayers 《Geophysical Prospecting》1995,43(4):541-568
Results from walkaway VSP and shale laboratory experiments show that shale anisotropy can be significantly anelliptic. Heterogeneity and anellipticity both lead to non-hyperbolic moveout curves and the resulting ambiguity in velocity analysis is investigated for the case of a factorizable anisotropic medium with a linear dependence of velocity on depth. More information can be obtained if there are several reflectors. The method of Dellinger et al. for anisotropic velocity analysis in layered transversely isotropic media is examined and is shown to be restricted to media having relatively small anellipticity. A new scheme, based on an expansion of the inverse-squared group velocity in spherical harmonics, is presented. This scheme can be used for larger anellipticity, and is applicable for horizontal layers having monoclinic symmetry with the symmetry plane parallel to the layers. The method is applied to invert the results of anisotropic ray tracing on a model Sand/shale sequence. For transversely isotropic media with small anisotropy, the scheme reduces to the method of Byun et al. and Byun and Corrigan. The expansion in spherical harmonics allows the P-phase slowness surface of each layer to be determined in analytic form from the layer parameters obtained by inversion without the need to assume that the anisotropy is weak. 相似文献
4.
非零偏VSP地震资料是一种多分量资料,处理非零偏VSP资料,弹性波叠前逆时深度偏移技术无疑是最适合的处理技术.本文从二维各向同性介质的弹性波波动方程出发,研究了对非零偏VSP资料进行叠前逆时深度偏移的偏移算法,讨论了逆时传播过程中的边值问题和数值频散问题及其相应的解决方案;采用求解程函方程计算得到地下各点的地震波初至时间作为成像时间,实现了非零偏VSP资料的叠前逆时深度偏移.最后进行了模型试算和非零偏VSP地震资料的试处理,结果表明该方法不受地层倾角限制,较适用于高陡构造地区或介质横向速度变化较大地区的非零偏VSP地震资料处理. 相似文献
5.
利用微扰理论推导了弱各向异性(WA)介质参数正反演计算的基本公式;给出了在已知慢度矢量的一个分量和偏振矢量情况下确定WA参数的方法.如果这一方法被用于单一的变井源距垂直地震剖面(walkawayVSP)资料,可以获得9个WA参数.这9个WA参数完全决定了qP波和两个qS波在由剖面和钻井所决定的平面内传播的特性.对单条walkawayVSP观测系统数据的产生和WA参数的反演进行了数值模拟计算,对所能确定的WA参数及其可靠性进行了详细的讨论. 相似文献
6.
在地震勘探中,描述复杂介质的正演和反演问题通常包含许多反映介质不同特性的参数.同时获得这些参数对进行更准确的岩性描述和油藏预测具有重要的理论和现实意义.为了提高频率域黏弹性波动方程的零偏VSP多参数反演的精度,本文对多参数反演的可行性进行分析,明确了目标函数的敏感程度及参数之间的耦合情况,提出了一种基于走时约束的分频分步多参数反演策略.首先利用零偏VSP资料构建先验信息,然后分别利用高、低频数据进行两步反演,也就是"三个参数反演+五个参数反演"的过程,以提高反演的稳健性和精度.利用此方法可同时得到零偏VSP数据可靠的弹性波速度、密度和品质因子,为精确的时-深关系及含油气的解释和预测奠定基础,同时也可以为地面地震叠前反演提供可靠有效的约束,增强地面地震反演精度. 相似文献
7.
Because zero-offset VSP (Vertical Seismic Profile) data can only provide the information of rock properties and structure in the area around the Fresnel zone within the well, the scheme of VSP with offset was developed to acquire the reflection information away from the borehole in order to widen the range of VSP survey and to improve the precision of imaging.In this paper, we present a new CDP (Common Depth Point) mapping approach to image the reflecting structure by using offset VSP data. For the processing of offset VSP data, we firstly separated the up-going and down-going wave-fields from VSP data by means of F-K filtering technique, and we can calculate the mapping conditions (position and reflecting traveltime for CDP point) in homogeneous media, and then reconstruct the inner structure of the earth.This method is tested by using the offset VSP data which are used to simulate the case of super-deep borehole by means of finite-difference method. The imaged structure matches the real model very well. The results show that the method present here could accurately image the inner structure of the earth if the deviation of initial velocity model from the true model is less than 10%. Finally, we presented the imaged results for the real offset data by using this method. 相似文献
8.
本文基于弱各向异性（WA）介质的正反演公式和qP波的坐标变换,推导了利用qP波反演任意倾斜对称轴的横向各向同性（TTI）介质的各向异性参数和对称轴方向的公式.理论和数值实验表明,利用2个相互正交的变井源距垂直地震剖面（walkaway VSP）可以完全确定钻井中TTI介质qP波的3个WA参数和对称轴的2个方向参数.我们完成了几个由不同数量剖面组成的walkaway VSP模拟实验,使用TTI模型和一般各向异性模型对模拟数据进行了反演,证明了反演公式的正确性和可靠性.使用这些公式,对来自Java Sea的由3条剖面组成的walkaway VSP观测数据进行了各向异性反演,获得了钻井中接收点处介质的WA参数. 相似文献
9.
Amir Abbas Babasafari Deva Prasad Ghosh Ahmed Mohammed Ahmed Salim Masoumeh Kordi 《Geophysical Prospecting》2020,68(8):2471-2493
Analysis of amplitude variation with offset is an essential step for reservoir characterization. For an accurate reservoir characterization, the amplitude obtained with an isotropic assumption of the reservoir must be corrected for the anisotropic effects. The objective is seismic anisotropic amplitude correction in an effective medium, and, to this end, values and signs of anisotropic parameter differences (Δδ and Δε) across the reflection interfaces are needed. These parameters can be identified by seismic and well log data. A new technique for anisotropic amplitude correction was developed to modify amplitude changes in seismic data in transversely isotropic media with a vertical axis of symmetry. The results show that characteristics of pre-stack seismic data, that is, amplitude variation with offset gradient, can be potentially related to the sign of anisotropic parameter differences (Δδ and Δε) between two layers of the reflection boundary. The proposed methodology is designed to attain a proper fit between modelled and observed amplitude variation with offset responses, after anisotropic correction, for all possible lithofacies at the reservoir boundary. We first estimate anisotropic parameters, that is, δ and ε, away from the wells through Backus averaging of elastic properties resulted from the first pass of isotropic pre-stack seismic inversion, on input data with no amplitude correction. Next, we estimate the anisotropic parameter differences at reflection interfaces (values and signs of Δδ and Δε). We then generate seismic angle gather data after anisotropic amplitude correction using Rüger's equation for the P-P reflection coefficient. The second pass of isotropic pre-stack seismic inversion is then performed on the amplitude-corrected data, and elastic properties are estimated. Final outcome demonstrates how introduced methodology helps to reduce the uncertainty of elastic property prediction. Pre-stack seismic inversion on amplitude-corrected seismic data results in more accurate elastic property prediction than what can be obtained from non-corrected data. Moreover, a new anisotropy attribute (ν) is presented for improvement of lithology identification. 相似文献
10.
Bayesian Markov chain Monte Carlo inversion for anisotropy of PP- and PS-wave in weakly anisotropic and heterogeneous media 
下载免费PDF全文
下载免费PDF全文 A single set of vertically aligned cracks embedded in a purely isotropic background may be considered as a long-wavelength effective transversely isotropy (HTI) medium with a horizontal symmetry axis. The crack-induced HTI anisotropy can be characterized by the weakly anisotropic parameters introduced by Thomsen. The seismic scattering theory can be utilized for the inversion for the anisotropic parameters in weakly anisotropic and heterogeneous HTI media. Based on the seismic scattering theory, we first derived the linearized PP- and PS-wave reflection coefficients in terms of P- and S-wave impedances, density as well as three anisotropic parameters in HTI media. Then, we proposed a novel Bayesian Markov chain Monte Carlo inversion method of PP- and PS-wave for six elastic and anisotropic parameters directly. Tests on synthetic azimuthal seismic data contaminated by random errors demonstrated that this method appears more accurate, anti-noise and stable owing to the usage of the constrained PS-wave compared with the standards inversion scheme taking only the PP-wave into account. 相似文献
11.
Simultaneous estimation of velocity gradients and anisotropic parameters from seismic reflection data is one of the main challenges in transversely isotropic media with a vertical symmetry axis migration velocity analysis. In migration velocity analysis, we usually construct the objective function using the l2 norm along with a linear conjugate gradient scheme to solve the inversion problem. Nevertheless, for seismic data this inversion scheme is not stable and may not converge in finite time. In order to ensure the uniform convergence of parameter inversion and improve the efficiency of migration velocity analysis, this paper develops a double parameterized regularization model and gives the corresponding algorithms. The model is based on the combination of the l2 norm and the non‐smooth l1 norm. For solving such an inversion problem, the quasi‐Newton method is utilized to make the iterative process stable, which can ensure the positive definiteness of the Hessian matrix. Numerical simulation indicates that this method allows fast convergence to the true model and simultaneously generates inversion results with a higher accuracy. Therefore, our proposed method is very promising for practical migration velocity analysis in anisotropic media. 相似文献
12.
A general inversion scheme based on a genetic algorithm is developed to invert seismic observations for anisotropic parameters. The technique is applied to the inversion of shear-wave observations from two azimuthal VSP data sets from the Conoco test site in Oklahoma. Horizontal polarizations and time-delays are inverted for hexagonal and orthorhombic symmetries. The model solutions are consistent with previous studies using trial and error matching of full waveform synthetics. The shear-wave splitting observations suggest the presence of a shear-wave line singularity and are consistent with a dipping fracture system which is known to exist at the test site. Application of the inversion scheme prior to full waveform modelling demonstrates that a considerable saving in time is possible whilst retaining the same degree of accuracy. 相似文献
13.
Alexander Droujinine 《Geophysical Prospecting》2005,53(1):37-63
Walkaway vertical seismic profile (VSP) data acquired in basalt‐covered areas can be used to improve knowledge of the sub‐basalt structure. A synthetic example and a case study from the North Atlantic (UK) show that elastic two‐way downward‐continuation migration combined with the stationary‐phase principle is well suited to the processing of VSP data. Vector data are processed using decoupled elastic migration algorithms in both isotropic and anisotropic media. To illustrate the value of decoupled imaging equations, conventional PP imaging is carried out on the enhanced VSP data and compared with the decoupled scheme. Decoupled vector migration operates directly on the displacement vector, and uses various wave modes. Downgoing waves are migrated to image basalt lava flows and measure their anisotropy. Upgoing waves are used for high‐resolution sub‐basalt imaging. 相似文献
14.
— A P-wave tomographic method for 3-D complex media (3-D distribution of elastic parameters and curved interfaces) with orthorhombic symmetry is presented in this paper. The technique uses an iterative linear approach to the nonlinear travel-time inversion problem. The hypothesis of orthorhombic anisotropy and 3-D inhomogeneity increases the set of parameters describing the model dramatically compared to the isotropic case. Assuming a Factorized Anisotropic Inhomogeneous (FAI) medium and weak anisotropy, we solve the forward problem by a perturbation approach. We use a finite element approach in which the FAI medium is divided into a set of elements with polynomial elastic parameter distributions. Inside each element, analytical expressions for rays and travel times, valid to first-order, are given for P waves in orthorhombic inhomogeneous media. More complex media can be modeled by introducing interfaces separating FAI media with different elastic properties. Simple formulae are given for the Fréchet derivatives of the travel time with respect to the elastic parameters and the interface parameters. In the weak anisotropy hypothesis the P-wave travel times are sensitive only to a subset of the orthorhombic parameters: the six P-wave elastic parameters and the three Euler angles defining the orientation of the mirror planes of symmetry. The P-wave travel times are inverted by minimizing in terms of least-squares the misfit between the observed and calculated travel times. The solution is approached using a Singular Value Decomposition (SVD). The stability of the inversion is ensured by making use of suitable a priori information and/or by applying regularization. The technique is applied to two synthetic data sets, simulating simple Vertical Seismic Profile (VSP) experiments. The examples demonstrate the necessity of good 3-D ray coverage when considering complex anisotropic symmetry. 相似文献
15.
Estimation of Thomsen＇s anisotropic parameters is very important for accuratetime-to-depth conversion and depth migration data processing. Compared with othermethods, it is much easier and more reliable to estimate anisotropic parameters that arerequired for surface seismic depth imaging from vertical seismic profile （VSP） data, becausethe first arrivals of VSP data can be picked with much higher accuracy. In this study, wedeveloped a method for estimating Thomsen＇s P-wave anisotropic parameters in VTImedia using the first arrivals from walkaway VSP data. Model first-arrival travel times arecalculated on the basis of the near-offset normal moveout correction velocity in VTI mediaand ray tracing using Thomsen＇s P-wave velocity approximation. Then, the anisotropicparameters 0 and e are determined by minimizing the difference between the calculatedand observed travel times for the near and far offsets. Numerical forward modeling, usingthe proposed method indicates that errors between the estimated and measured anisotropicparameters are small. Using field data from an eight-azimuth walkaway VSP in TarimBasin, we estimated the parameters 0 and e and built an anisotropic depth-velocity modelfor prestack depth migration processing of surface 3D seismic data. The results showimprovement in imaging the carbonate reservoirs and minimizing the depth errors of thegeological targets. 相似文献
16.
目前大地电磁(MT)测深资料反演主要基于各向同性介质,但随着MT实际应用的需要,各向异性研究已逐渐引起关注.我们采用广泛应用的广义逆法对一维MT水平层状各向异性介质模型反演进行了探索性研究,并实现了MT全张量响应(即所有的阻抗张量的视电阻率和相位)的一维各向异性反演.理论模型试验表明,无论理论观测值中是否含有噪声,这种方法都能够较好地恢复真实模型,验证了其正确性和有效性.将此方法用于MT实测资料时,能够同时拟合4对视电阻率和阻抗相位曲线,说明本方法可以用于实测资料的处理解释,具有一定的实用价值. 相似文献
17.
在长波长假设条件下,水平层状地层中发育一组垂直排列的裂缝构成了等效正交各向异性介质.各向异性参数与裂缝弱度参数的估算有助于非均匀各向异性介质的各向异性特征描述,而弹性逆散射理论是非均匀介质参数反演的有效途径.基于地震散射理论,我们首先推导了非均匀正交介质中纵波散射系数方程,并通过引入正交各向异性特征参数,提出了一种新颖的正交各向异性方位弹性阻抗参数化方法.为了提高反演的稳定性与横向连续性,我们发展了贝叶斯框架下的正交各向异性方位弹性阻抗反演方法,同时考虑了柯西稀疏约束正则化和平滑模型约束正则化,最终使用非线性的迭代重加权最小二乘策略实现了各向异性特征参数的稳定估算.模型和实际资料处理表明,反演结果与测井解释数据相吻合,证明了该方法能够稳定可靠地从方位叠前地震资料中获取各向异性特征参数,减小参数估算的不确定性,为非均匀正交介质的各向异性预测提供了一种高可靠性的地震反演方法. 相似文献
18.
常规Alkhalifah动校正公式精度低,不能精确描述各向异性介质长偏移距地震反射同相轴的时距关系.本文以提高VTI介质长偏移距地震资料动校正公式的精度为目标,在分析VTI介质常规动校正方程的基础上,根据误差最小原理建立优化校正系数图版,实现对常规动校正公式大偏移距误差的修正,建立最优化校正Alkhalifah动校正方程,实现了对VTI介质长偏移距地震资料常规动校正方程的改进.之后由Fomel群速度公式导出高精度VTI模型长偏移距时距函数,提出了高精度VTI介质长偏移距地震资料动校正方程.将以上的动校正方程用于各向异性参数反演,模型计算表明最优化校正Alkhalifah动校正方程的反演精度是常规长偏移距动校正方程反演精度的2～4倍,高精度动校正方程的反演精度是常规动校正方程反演精度的2～8倍. 相似文献
19.
We have implemented a 3D finite‐difference scheme to simulate wave propagation in arbitrary anisotropic media. The anisotropic media up to orthorhombic symmetry were modelled using a standard staggered grid scheme and beyond (monoclinic and triclinic) using a rotated staggered grid scheme. The rationale of not using rotated staggered grid for all types of anisotropic media is that the rotated staggered grid schemes are more expensive than standard staggered grid schemes. For a 1D azimuthally anistropic medium, we show a comparison between the seismic data generated by our finite‐difference code and by the reflectivity algorithm; they are in excellent agreement. We conducted a study on zero‐offset shear‐wave splitting using the finite‐difference modelling algorithm using the rotated staggered grid scheme. Our S‐wave splitting study is mainly focused on fractured media. On the scale of seismic wavelenghts, small aligned fractures behave as an equivalent anisotropic medium. We computed the equivalent elastic properties of the fractures and the background in which the fractures were embedded, using low‐frequency equivalent media theories. Wave propagation was simulated for both rotationally invariant and corrugated fractures embedded in an isotropic background for one, or more than one, set of fluid‐filled and dry fractures. S‐wave splitting was studied for dipping fractures, two vertical non‐orthogonal fractures and corrugated fractures. Our modelling results confirm that S‐wave splitting can reveal the fracture infill in the case of dipping fractures. S‐wave splitting has the potential to reveal the angle between the two vertical fractures. We also notice that in the case of vertical corrugated fractures, S‐wave splitting is sensitive to the fracture infill. 相似文献
20.
Anisotropy is often observed due to the thin layering or aligned micro‐structures, like small fractures. At the scale of cross‐well tomography, the anisotropic effects cannot be neglected. In this paper, we propose a method of full‐wave inversion for transversely isotropic media and we test its robustness against structured noisy data. Optimization inversion techniques based on a least‐square formalism are used. In this framework, analytical expressions of the misfit function gradient, based on the adjoint technique in the time domain, allow one to solve the inverse problem with a high number of parameters and for a completely heterogeneous medium. The wave propagation equation for transversely isotropic media with vertical symmetry axis is solved using the finite difference method on the cylindrical system of coordinates. This system allows one to model the 3D propagation in a 2D medium with a revolution symmetry. In case of approximately horizontal layering, this approximation is sufficient. The full‐wave inversion method is applied to a crosswell synthetic 2‐component (radial and vertical) dataset generated using a 2D model with three different anisotropic regions. Complex noise has been added to these synthetic observed data. This noise is Gaussian and has the same amplitude f?k spectrum as the data. Part of the noise is localized as a coda of arrivals, the other part is not localized. Five parameter fields are estimated, (vertical) P‐wave velocity, (vertical) S‐wave velocity, volumetric mass and the Thomsen anisotropic parameters epsilon and delta. Horizontal exponential correlations have been used. The results show that the full‐wave inversion of cross‐well data is relatively robust for high‐level noise even for second‐order parameters such as Thomsen epsilon and delta anisotropic parameters. 相似文献