首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 796 毫秒
1.
Remote sensing of discharge and river stage from space provides us with a promising alternative approach to monitor watersheds, no matter if they are ungauged, poorly gauged, or fully gauged. One approach is to estimate river stage from satellite measured inundation area based on the inundation area – river stage relationship (IARSR). However, this approach is not easy to implement because of a lack of data for constructing the IARSR. In this study, an innovative and robust approach to construct the IARSR from digital elevation model (DEM) data was developed and tested. It was shown that the constructed IARSR from DEM data could be used to retrieve water level or river stage from satellite‐measured inundation area. To reduce the uncertainty in the estimated inundation area, a dual‐thresholding method was proposed. The first threshold is the lower limit of pixel value for classifying water body pixels with a relatively high‐level certainty. The second threshold is the upper limit of pixel value for classifying potentially flooded pixels. All pixels with values between the first threshold and the second threshold and adjacent to the classified water body pixels may be partially flooded. A linear interpolation method was used to estimate the wetted area of each partially flooded pixel. In applying the constructed IARSR to the estimated inundation areas from 11 Landsat TM images, 11 water levels were obtained. The root mean square error (RMSE) of the estimated water levels compared with the observed water levels at the US Geological Survey (USGS) gauging station on the Trinity River at Liberty in Liberty County, Texas, is about 0.38 m. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

2.
  相似文献   

3.
Variations in floodplain channel water levels and valley floor groundwater levels (measured in piezometers and boreholes) are examined at selected points along the course of the River Lambourn, a chalk river in southern England. A local alluvial gravel aquifer in the valley bottom is associated with numerous small wetlands that extend over much of the river's perennial profile. Variations in hydraulic gradient between local borehole levels and/or floodplain channel water levels are described for three sites in the seasonal section of the channel at Bockhampton, East Garston and West Shefford. The results indicate that observed groundwater levels are closely associated with flows from discrete springs at the margins of the channel and floodplain. However, as the floodplain widens and the alluvial gravel aquifer increases in size, the gravel aquifer accounts for a substantial down-valley component of groundwater flow with a diffuse vertical water flux. In the lower catchment, the exchange of flows between the gravel aquifer and the river enables some attenuation of floodplain water-table variability, providing a stable hydrological regime for valley-bottom wetlands. Catchment controls upon the local, valley-bottom, wetland regime are demonstrated with the application of a simple groundwater model developed using MODFLOW. The model is used to simulate groundwater discharge to the river in the upper and lower catchment, in addition to the water level regime at selected points in the valley bottom in the lower catchment. The results demonstrate the importance of taking catchment-scale water flow into account when managing isolated wetlands in a permeable catchment.  相似文献   

4.
ABSTRACT

This study evaluates and compares two-dimensional (2D) numerical models of different complexities by testing them on a floodplain inundation event that occurred on the Secchia River (Italy). We test 2D capabilities of LISFLOOD-FP and HEC-RAS (5.0.3), implemented using various grid sizes (25–100 m) based on 1-m DEM resolution. As expected, the best results were shown by the higher-resolution grids (25 m) for both models, which is justified by the complex terrain of the area. However, the coarser resolution simulations (50 and 100 m) performed virtually identically compared to the high-resolution simulations. Nevertheless, the spatial distribution of flood characteristics varies: the 50 and 100 m results of LISFLOOD-FP and HEC-RAS misestimated flood extent and water depth in selected control areas (built-up zones). We suggest that the specific terrain of the area can cause ambiguities in large-scale modelling, while providing plausible results in terms of the overall model performance.  相似文献   

5.
Large-scale flood modelling approaches designed for regional to continental scales usually rely on relatively simple assumptions to represent the potentially highly complex river bathymetry at the watershed scale based on digital elevation models (DEMs) with a resolution in the range of 25–30 m. Here, high-resolution (1 m) LiDAR DEMs are employed to present a novel large-scale methodology using a more realistic estimation of bathymetry based on hydrogeomorphological GIS tools to extract water surface slope. The large-scale 1D/2D flood model LISFLOOD-FP is applied to validate the simulated flood levels using detailed water level data in four different watersheds in Quebec (Canada), including continuous profiles over extensive distances measured with the HydroBall technology. A GIS-automated procedure allows to obtain the average width required to run LISFLOOD-FP. The GIS-automated procedure to estimate bathymetry from LiDAR water surface data uses a hydraulic inverse problem based on discharge at the time of acquisition of LiDAR data. A tiling approach, allowing several small independent hydraulic simulations to cover an entire watershed, greatly improves processing time to simulate large watersheds with a 10-m resampled LiDAR DEM. Results show significant improvements to large-scale flood modelling at the watershed scale with standard deviation in the range of 0.30 m and an average fit of around 90%. The main advantage of the proposed approach is to avoid the need to collect expensive bathymetry data to efficiently and accurately simulate flood levels over extensive areas.  相似文献   

6.
Aquatic macrophytes produce large amounts of organic matter and have an essential structuring role in floodplains. This process highlights the importance of this community to aquatic biodiversity maintenance. We investigated the role of a flood disturbance on the response of macrophyte assemblages in regional and local structuring in the Upper Paraná River floodplain. Plant species were recorded before (November 2006) and after (March 2007) an uncommon increase in water level caused by the El Niño South Oscillation, which is considered a disturbance. Samples were taken in lakes and backwaters located in the floodplain and connected to three distinct rivers (that differentiate three sub-systems). Species richness and the assemblage structure of macrophyte patches underwent significant changes after the flood disturbance, depending on the specific sub-system (rivers) to which the lakes were connected. In addition, flood disturbance had a strong impact on community organization at the local scale. However, regionalization with respect to sub-systems remained significant after the flood disturbance. Our results emphasize the importance of connection to the river on macrophyte community composition and richness, and suggest that flood events in the Upper Paraná River floodplain disrupt community organization only at fine (local) scales.  相似文献   

7.
In the Senegal River valley and Niger Inner Delta, the annual floods inundate a wide floodplain consisting of a complex network of lakes and channels, where topographic information needed by standard hydraulic models is difficult to obtain. To represent the flood propagation between mainstream and floodplain, we use a model designed for flood propagation in river mainstreams with flat bed and large overflow and without topographic data. Depending on the water level in the riverbed, the model calibrated on the levels observed at two stations gives the level in the floodplains and propagation time between stations. Several cases are tested for various types of hydraulic connections between mainstream and floodplain. The model could correctly reproduce the flood rise and fall in the floodplain, even for a lake connected by a single channel to the riverbed or in the case of a strong attenuation of the flood between very distant stations.  相似文献   

8.
In this study, we propose to identify morphological and hydraulic characteristics related to overbank flows in the water level time‐series available at many gauged stations. The results obtained at 13 river stations (the catchment sizes vary from 10 to 1700 km2 with contrasted geology, land use and rainfalls regime) show that overflow mechanisms at the river‐reach scale can be systematically identified in the water level frequency distribution estimated with the peaks‐over‐threshold (POT) method. A first level (Lts1) was in the range of the incipient flooding onto the floodplain. Even if the definition of this level is variable in terms of flooded area at the reach scale, this method can be useful in providing a first estimation of the bankfull level for many gauged stations, without complex and costly field surveys. A second level (Lts2) was systematically detected on average 38 cm above the topographic flat floodplain elevation. The Lts2 inflection in the water‐level frequency distribution is assumed to reflect a composite effect of catchment hydrology and local hydraulics and channel geometry, without possibility to make a clear distinction between both processes at the moment. The local or reach scale effect would probably play an essential role in the frequency distribution as flood attenuation at catchment scale may explain the inflection Lts2 at only three sites. In light of the knowledge acquired in laboratory flumes with compound channels, most of the time Lts2 level would correspond to the level of resumption of flow both in the main channel and the floodplain. Once this method is validated in various physiographic contexts, it should apply to many hydrometric stations for both synchronic (e.g. regional analysis) and diachronic analysis (e.g. evolution over time of the bankfull discharge) to evaluate anthropic impacts on river morphology. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

9.
This paper presents a novel technique to quantify in situ hydrodynamic roughness of submerged floodplain vegetation: 3D float tracking. This method uses a custom‐built floating tripod that is released on the inundated floodplain and tracked from shore by a robotic total station. Simultaneously, an acoustic Doppler current profiler (ADCP) collects flow velocity profiles and water depth data. Roughness values are derived from two methods based on (1) run‐averaged values of water depth, slope and flow velocity to compute the roughness based on the Chézy equation, assuming uniform flow, (2) the equation for one‐dimensional free surface flow in a moving window. A sensitivity analysis using synthetic data proved that the median value of the roughness, derived using method 2, is independent of (1) the noise in water levels, up to 9 mm, (2) bottom surface slope, and (3) topographic undulations. The window size should be at least 40 m for a typical lowland river setup. Field measurements were carried out on two floodplain sections with an average vegetation height of 0·030 (Arnhem) and 0·043 m (Dreumel). Method 1 resulted in a Nikuradse roughness length of 0·08 m for both locations. Method 2 gave 0·12 m for Arnhem and 0·19 m for Dreumel. In Arnhem, a spatial pattern of roughness values was present, which might be related to fractional vegetation cover or vegetation density during the flood peak. 3D float tracking proved a flexible and detailed method for roughness determination in the absence of waves, and provided an unrestricted view from shore. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

10.
Determining the extent of flooding is an important role of the hydrological research community and provides a vital service to planners and engineers. For large river systems located within distant settings it is practical to utilize a remote sensing approach. This study combines a remote sensing and geomorphic approach to delineate the extent of a large hurricane generated flood event in the lower Pánuco basin (98,227 km2), the seventh largest river system draining into the Gulf of Mexico. The lower Pánuco basin is located within the coastal plain of eastern Mexico and has a complex alluvial valley. Data sources included a Landsat 5TM and Landsat 7ETM+ scene, and topographic and particle size data from fieldwork and laboratory analysis. The Landsat 5TM image was acquired after the peak of a large flood event in 1993, whereas the Landsat 7ETM+ scene was acquired during the dry season in 2000. The increasing number of days between flood crest and the date of flood image acquisition along the river valley provided the opportunity to examine several methods of flood delineation and to consider differences in floodplain geomorphology. Backswamp environments were easily delineated in flooded reaches within the Panuco and Tamuin valleys, whereas in the Moctezuma valley more sophisticated methods were required because of the greater time between image acquisition and flood peak, and the complex floodplain topography. This included Principal Component (PC) analysis and image classification. Within the floodplain, residual Holocene terraces complicated flood mapping. Classification of both images allowed consideration of the influence of permanent standing water. Although the flooded areas were greater in the lower reaches of the study area, because this portion of the valley contained large floodplain lakes, the amount of inundation was actually lower. Remote sensing offers the ability to examine large alluvial valleys in distant settings but does not imply that geomorphic criteria should be excluded. Indeed, because of heterogeneous floodplain topography this study illustrates the importance of including field based geomorphic analysis so that the complexity of distinct floodplain environments are considered. The findings from this study are significant because most remote sensing data obtained for the purpose of flood mapping will not coincide with the flood crest. Thus, this study provides an appropriate method for mapping flood inundation in large and complex floodplain settings after flood crest recession.  相似文献   

11.
Traditional method to generate Digital Elevation Model (DEM)through topographic map and topographic measurement has weak points such as low efficiency, long operating time and small range. The emergence of DEM-generation technology from high resolution satellite image provides a new method for rapid acquisition of large terrain and geomorphic data, which greatly improves the efficiency of data acquisition. This method costs lower compared with LiDAR (Light Detection and Ranging), has large coverage compared with SfM (Structure from Motion). However, there is still lack of report on whether the accuracy of DEM generated from stereo-imagery satisfies the quantitative research of active tectonics. This research is based on LPS (Leica Photogrammetry Suit)software platform, using Worldview-2 panchromatic stereo-imagery as data source, selecting Kumishi Basin in eastern Tianshan Mountains with little vegetation as study area. We generated 0.5m resolution DEM of 5-km swath along the newly discovered rupture zone at the south of Kumishi Basin, measured the height of fault scarps on different levels of alluvial fans based on the DEM, then compared with the scarp height measured by differential GPS survey in the field to analyze the accuracy of the extracted DEM. The results show that the elevation difference between the topographic profiles derived from the extracted DEM and surveyed by differential GPS ranges from -2.82 to 4.87m. The shape of the fault scarp can be finely depicted and the deviation is 0.30m after elevation correction. The accuracy of measuring the height of fault scarps can reach 0.22m, which meets the need of high-precision quantitative research of active tectonics. It provides great convenience for rapidly obtaining fine geometry, profiles morphology, vertical dislocations of fault and important reference for sites selection for trench excavation, slip rate, and samples. This method has broad prospects in the study of active tectonics.  相似文献   

12.
The main objective of this study was to quantify the error associated with input data, including various resolutions of elevation datasets and Manning’s roughness for travel time computation and floodplain mapping. This was accomplished on the test bed, the Grand River (Ohio, USA) using the HEC-RAS model. LiDAR data integrated with survey data provided conservative predictions, whereas coarser elevation datasets provided a positive difference in the travel time (11.03–15.01%) and inundation area (32.56–44.52%). The minimum differences in travel time and inundation area were 0.50–4.33% and 3.55–7.16%, respectively, when the result from LiDAR integrated with survey data was compared with a 10-m DEM integrated with survey data. The results suggest that a 10-m DEM in the channel and LiDAR data in the floodplain combined with survey data would be appropriate for a flood warning system. Additionally, Manning’s roughness of the channel section was found to be more sensitive than that of the floodplain. The decrease in inundation area was highest (8.97%) for the lower value of Manning’s roughness.  相似文献   

13.
The advent of 2D hydraulic modelling has improved our understanding of flood hydraulics, thresholds, and dynamic effects on floodplain geomorphology and riparian vegetation at the morphological-unit scale. Hydraulic concepts of bed shear stress, stream power maxima, and energy (cumulative stream power) have been used to characterize floods and define their geomorphic effectiveness. These hydraulic concepts were developed in the context of reach-averaged, 1D hydraulic analyses, but their application to 2D model results is problematic due to differences in the treatment of energy losses in 1D and 2D analyses. Here we present methods for estimating total and boundary resistance from 2D modelling of an extreme flood on a subtropical river. Hydraulic model results are correlated with observations of the flood impacts on floodplain geomorphology and the riparian vegetation to identify thresholds and compute variants of flood energy. Comparison of LiDAR data in 2011 and 2014 shows that the 2011 flood produced 2–4 m of erosion on floodplain bars that were previously forested or grass-covered. Deposition on flood levees, dunes, and chute bars was up to 3.4 m thick. Various hydraulic metrics were trialled as candidates for thresholds of vegetation disturbance. The accuracy of thresholds using metrics extracted at the flood peak (i.e. boundary resistance and stream power maxima) was similar to that using energy as a threshold. Disturbance to forest and grass on vegetated bars was associated with stream powers of >834 W/m2 and unit flows of >26 m2/s, respectively. Correlation of the hydraulic metrics with erosion and deposition depths showed no substantial improvement in using flood energy compared to metrics extracted at the flood peak for describing erosion and deposition. The extent of vegetation disturbances and morphological adjustments was limited for this extreme flood, and further 2D studies are needed to compare disturbance thresholds across different environments.  相似文献   

14.
受地表河湖系统水情变化干扰,高度动态和异质性的洪泛区地下水文对河湖水资源、水污染以及生态环境功能等方面具有重要影响和贡献。鄱阳湖洪泛区湿地在长江中下游具有重要区位优势和研究特色,但变化环境下其水动力特征和水量交换情况等仍存在许多不确定性。本文以鄱阳湖典型洪泛区为研究区,采用地下水流二维数值模型,开展了洪泛区地表地下水转化作用与水量变化的模拟研究。结果表明,鄱阳湖季节性水位变化很大程度上决定了主湖区与周边地下水之间的动态补排模式,即洪泛区地下水补给湖泊主要发生在枯水和退水时期,而湖泊补给地下水主要发生在涨水和高洪水位时期。一般情况下,整个洪泛区地下水位与湖水位的年内变化态势基本一致,主湖区附近的地下水位年内变幅较大,而大部分洪泛区的地下水位变幅相对较小。北部地下水流速明显大于南部,主湖区附近地下水流速明显大于洪泛区,地下水流速基本小于1～2 m/d。水均衡分析发现,洪泛区地下水系统以接受降雨输入（52%）和主湖区补给（39%）为主,以地下水蒸发输出（72%）和向湖排泄（24%）为主,但补给主要发生在春、夏季,而排泄则发生在秋、冬季。地形地貌对洪泛区地下水位分布以及流速场演化具有主控作用,...  相似文献   

15.
This article addresses spatial variability of comtemporary floodplain sedimentation at the event scale. Measurements of overbank deposition were carried out using sediment traps on 11 floodplain sections along the rivers Waal and Meuse in The Netherlands during the high-magnitude flood of December 1993. During the flood, sand sheets were locally deposited behind a natural levee. At distances greater than 50 to 100 m from the river channel the deposits consisted mainly of silt- and clay-sized material. Observed patterns of deposition were related to floodplain topography and sediment transporting mechanisms. Though at several sites patterns were observed that suggest transport by turbulent diffusion, convection seems the dominant transporting mechanism, in particular in sections that are bordered by minor embankments. The average deposition of overbank fines ranged between 1·2 and 4·0 kg m−2 along the river Waal, and between 1·0 and 2·0 kg m−2 along the river Meuse. The estimated total accumulation of overbank fines (not including sand sheets) on the entire river Waal floodplain was 0·24 Mton, which is 19 per cent of the total suspended sediment load transported through the river Waal during the flood. © 1998 John Wiley & Sons, Ltd.  相似文献   

16.
A key aspect of large river basins partially neglected in large‐scale hydrological models is river hydrodynamics. Large‐scale hydrologic models normally simulate river hydrodynamics using simplified models that do not represent aspects such as backwater effects and flood inundation, key factors for some of the largest rivers of the world, such as the Amazon. In a previous paper, we have described a large‐scale hydrodynamic approach resultant from an improvement of the MGB‐IPH hydrological model. It uses full Saint Venant equations, a simple storage model for flood inundation and GIS‐based algorithms to extract model parameters from digital elevation models. In the present paper, we evaluate this model in the Solimões River basin. Discharge results were validated using 18 stream gauges showing that the model is accurate. It represents the large delay and attenuation of flood waves in the Solimões basin, while simplified models, represented here by Muskingum Cunge, provide hydrographs are wrongly noisy and in advance. Validation against 35 stream gauges shows that the model is able to simulate observed water levels with accuracy, representing their amplitude of variation and timing. The model performs better in large rivers, and errors concentrate in small rivers possibly due to uncertainty in river geometry. The validation of flood extent results using remote sensing estimates also shows that the model accuracy is comparable to other flood inundation modelling studies. Results show that (i) river‐floodplain water exchange and storage, and (ii) backwater effects play an important role for the Amazon River basin hydrodynamics. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

17.
The resolution and accuracy of digital elevation models (DEMs) can affect the hydraulic simulation results for predicting the effects of glacial lake outburst floods (GLOFs). However, for the Tibetan Plateau, high‐quality DEM data are often not available, leaving researchers with near‐global, freely available DEMs, such as the Advanced Spaceborne Thermal Emission and Reflection Radiometer Global Digital Elevation Model (ASTER GDEM) and the Shuttle Radar Topography Mission data (SRTM) for hydraulic modelling. This study explores the suitability of these two freely available DEMs for hydraulic modelling of GLOFs. Our study focused on the flood plain of a potentially dangerous glacial lake in southeastern Tibet, to evaluate the elevation accuracy of ASTER GDEM and SRTM, and their suitability for hydraulic modelling of GLOFs. The elevation accuracies of ASTER GDEM and SRTM were first validated against field global position system (GPS) survey points, and then evaluated with reference to the relatively high precision of 1:50 000 scale DEM (DEM5) constructed from aerial photography. Moreover, the DEM5, ASTER GDEM and SRTM were used as basic topographic data to simulate peak discharge propagation, as well as flood inundation extent and depth in the Hydrologic Engineering Center's River Analysis System one‐dimensional hydraulic model. Results of the three DEM predictions were compared to evaluate the suitability of ASTER GDEM and SRTM for GLOF hydraulic modelling. Comparisons of ASTER GDEM and SRTM each with DEM5 in the flood plain area show root‐mean‐square errors between the former two as ± 15·4 m and between the latter two as ± 13·5 m. Although SRTM overestimates and ASTER GDEM underestimates valley floor elevations, both DEMs can be used to extract the elevations of required geometric data, i.e. stream centre lines, bank lines and cross sections, for flood modelling. However, small errors still exist in the cross sections that may influence the propagation of peak discharge. The flood inundation extent and mean water depths derived from ASTER GDEM predictions are only 2·2% larger and 2·3‐m deeper than that of the DEM5 predictions, whereas the SRTM yields a flood zone extent 6·8% larger than the DEM5 prediction and a mean water depth 2·4‐m shallower than the DEM5 prediction. The modelling shows that, in the absence of high‐precision DEM data, ASTER GDEM or SRTM DEM can be relied on for simulating extreme GLOFs in southeast Tibet. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

18.
We analyzed variation of channel–floodplain suspended sediment exchange along a 140 km reach of the lower Amazon River for two decades (1995–2014). Daily sediment fluxes were determined by combining measured and estimated surface sediment concentrations with river–floodplain water exchanges computed with a two‐dimensional hydraulic model. The average annual inflow to the floodplain was 4088 ± 2017 Gg yr?1 and the outflow was 2251 ± 471 Gg yr?1, respectively. Prediction of average sediment accretion rate was twice the estimate from a previous study of this same reach and more than an order of magnitude lower than an estimate from an earlier regional scale study. The amount of water routed through the floodplain, which is sensitive to levee topography and increases exponentially with river discharge, was the main factor controlling the variation in total annual sediment inflow. Besides floodplain routing, the total annual sediment export depended on the increase in sediment concentration in lakes during floodplain drainage. The recent increasing amplitude of the Amazon River annual flood over two decades has caused a substantial shift in water and sediment river–floodplain exchanges. In the second decade (2005–2014), as the frequency of extreme floods increased, annual sediment inflow increased by 81% and net storage increased by 317% in relation to the previous decade (1995–2004). Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

19.
There is growing concern that rapidly changing climate in high latitudes may generate significant geomorphological changes that could mobilise floodplain sediments and carbon; however detailed investigations into the bank erosion process regimes of high latitude rivers remain lacking. Here we employ a combination of thermal and RGB colour time-lapse photos in concert with water level, flow characteristics, bank sediment moisture and temperature, and topographical data to analyse river bank dynamics during the open-channel flow period (the period from the rise of the spring snowmelt flood until the autumn low flow period) for a subarctic river in northern Finland (Pulmanki River). We show how variations of bank sediment temperature and moisture affect bank erosion rates and locations, how bank collapses relate to fluvial processes, and elucidate the seasonal variations and interlinkages between the different driving processes. We find that areas with high levels of groundwater content and loose sand layers were the most prone areas for bank erosion. Groundwater seeping caused continuous erosion throughout the study period, whereas erosion by flowing river water occurred during the peak of snowmelt flood. However, erosion also occurred during the falling phase of the spring flood, mainly due to mass failures. The rising phase of the spring flood therefore did not affect the river bank as much as its peak or receding phases. This is explained because the bank is resistant to erosion due to the prevalence of still frozen and drier sediments at the beginning of the spring flood. Overall, most bank erosion and deposition occurrences were observed during the low flow period after the spring flood. This highlights that spring melt, while often delivering the highest discharges, may not be the main driver of bank erosion in sub-arctic meandering rivers. © 2019 John Wiley & Sons, Ltd.  相似文献   

20.
洪泛湿地是位于水生系统和陆生系统之间的过渡带,在河流和陆地之间的水文生态方面起着纽带作用,受气候变化和人类活动的叠加影响,其水文过程改变很大程度上影响了湿地生态系统循环、结构和功能的稳定。本文以鄱阳湖洪泛区湿地为研究区,应用湖泊水动力和洪泛区地下水数值模型,评估鄱阳湖拟建水利枢纽工程对洪泛区地下水系统的影响。模拟结果表明,拟建水利枢纽工程将会遵循调度方案使得湖泊水位明显提高,但同时导致洪泛区地下水位的整体抬升,且东部主湖区附近的地下水位受到的影响（约1～3 m）要明显强于洪泛区其它区域（约小于1 m）。地下水位的变化同时导致不同典型时期洪泛区地下水流速的减小及地下水流向的改变,表现为枢纽建设后地下水流向的逆转和流速基本小于0.1 m/d。鄱阳湖涨水-丰水期总体为湖水补给洪泛区地下水模式,枯水-退水期主要为地下水补给湖水模式,但水利枢纽可能导致洪泛区地下水系统水均衡状态发生转变,影响了地下水系统的补给和排泄状态,最终形成了长期稳定的湖泊补给地下水的作用模式。从地下水-生态系统响应变化的角度分析,拟建水利枢纽建设引起的地下水位上升,可能会给湿地生物地球化学元素的迁移转化、植被群落的演变与退...  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号