共查询到20条相似文献，搜索用时 15 毫秒
1.
本文利用人工制作的不同含量分散泥质和层状泥质砂岩岩心样品,测量不同矿化度和不同含油饱和度的岩心电阻率,从实验角度研究了不同泥质分布形式和含量的岩心导电规律,结果表明,泥质分布形式或含量不同,则泥质砂岩导电规律不同.基于层状泥质与分散泥质砂岩的并联导电实验规律,以及分散粘土和地层水混合物的导电规律可用HB电阻率方程描述,建立了考虑泥质分布形式影响的泥质砂岩电阻率模型.通过1组不同泥质分布形式泥质砂岩人造岩心实验数据的测试,表明该模型可以描述分散泥质砂岩、层状泥质砂岩和混合泥质砂岩地层的导电规律.分散泥质,层状泥质,人造岩样,实验测量,并联导电,HB方程,电阻率模型 相似文献
2.
在水介质中顺序添加分散粘土颗粒、油珠、导电骨架颗粒、层状泥质,并对每一种成分进行连续积分,建立了一种适用骨架导电及含有分散粘土和层状泥质的泥质砂岩通用电阻率模型.通过对该模型的影响因素分析,发现泥质分布形式对模型计算的含水饱和度有很大影响;对应两个不同粘土颗粒电阻率或骨架颗粒电阻率的地层电导率之差,几乎与总含水饱和度无关,而对应两个不同层状泥质电阻率的地层电导率之差,随总含水饱和度增大而增大;骨架胶结指数变化对地层电导率与总含水饱和度关系曲线的影响最大,而粘土胶结指数变化对地层电导率与总含水饱和度关系曲线的影响最小;饱和度指数对地层电导率与总含水饱和度关系曲线的影响随总含水饱和度的增大而减小.通过一组骨架导电的人造岩样的试验,表明当地层水电阻率.小于颗粒电阻率时,该模型可以用于不含粘土的骨架导电的岩石.通过两组分散泥质砂岩岩样实验测量数据和一组层状泥质砂岩测井资料及实际测井资料的计算,表明本文给出的电阻率模型既适用于分散泥质砂岩地层解释又适用于层状泥质砂岩地层解释,同时,还适用于含有分散粘土和层状泥质的混合泥质砂岩地层解释. 相似文献
3.
With the advancement in oil exploration,producible oil and gas are being found in low resistivity reservoirs,which may otherwise be erroneously thought as water zones from their resistivity.However,the evaluation of low resistivity reservoirs remains difficult from log interpretation.Since low resistivity in hydrocarbon bearing sands can be caused by dispersed clay,laminated shale,conductive matrix grains,microscopic capillary pores and high saline water,a new resistivity model is required for more accurate hydrocarbon saturation prediction for low resistivity formations.Herein,a generalized effective medium resistivity model has been proposed for low resistivity reservoirs,based on experimental measurements on artificial low resistivity shaly sand samples,symmetrical anisotropic effective medium theory for resistivity interpretations,and geneses and conductance mechanisms of low resistivity reservoirs.By analyzing effects of some factors on the proposed model,we show theoretically the model can describe conductance mechanisms of low resistivity reservoirs with five geneses.Also,shale distribution largely affects water saturation predicted by the model.Resistivity index decreases as fraction and conductivity of laminated shale,or fraction of dispersed clay,or conductivity of rock matrix grains increases.Resistivity index decreases as matrix percolation exponent,or percolation rate of capillary bound water increases,and as percolation exponent of capillary bound water,or matrix percolation rate,or free water percolation rate decreases.Rock sample data from low resistivity reservoirs with different geneses and interpretation results for log data show that the proposed model can be applied in low resistivity reservoirs containing high salinity water,dispersed clay,microscopic capillary pores,laminated shale and conductive matrix grains,and thus is considered as a generalized resistivity model for low resistivity reservoir evaluation. 相似文献
4.
P. F. WORTHINGTON 《Geophysical Prospecting》1982,30(5):673-687
The roots of the so-called shaly-sand problem in hydrocarbon evaluation lie in the effect of relatively fine-grained minerals upon measured electrical parameters of granular reservoirs. This influence manifests itself as an excess conductivity, over and above that due to the purely geometric effects of electrolyte distribution within the pore space. For formations with low shaliness, this excess conductivity is usually insignificant in typical oilfield situations. The influence of shaliness upon observed values of formation resistivity has been appraised by collating core-sample data from four different reservoirs. It has been demonstrated that during the course of electrical measurement under conditions of full electrolyte saturation, any given lithology can exhibit both negligible and highly significant shale effects depending upon the resistivity of the interstitial aqueous electrolyte. The effects of shaliness are also governed by the degree of water saturation. Because the manifestation of shaliness in electrical data is not a function of lithology alone, recourse is made to a more realistic concept of shale effects whereby a formation, or section of a formation, is classified as “effectively clean” or “effectively shaly” according to whether it obeys or defies, respectively, the fundamental empirical laws of Archie (1942). In particular, since an intrinsic formation factor can be obtained directly in fully-saturated effectively clean reservoirs, whereas only an apparent quantity may be recorded directly in fully-saturated effectively shaly reservoirs, the ratio of apparent to intrinsic formation factor serves as a useful conceptual indicator of shale effects, attaining the limiting value of unity only under effectively clean conditions. In the context of electrical measurement the terms “shaliness” and “shale effects” are evidently not synonymous and it is the latter which should be considered when selecting equations for the computation of water saturation. The implications for well-log analysis follow through formulated guidelines that describe the relative levels of shale effects in different zones of lithologically uniform reservoirs. 相似文献
5.
阿尔奇年代的储层孔隙结构简单,岩石孔隙可以被实验电解质完全充填,随着油气田勘探开发的逐步深入,对储层孔隙结构复杂程度的认识更加深入.发现岩石孔隙不仅有有效孔隙,也有无效孔隙.不仅有效孔隙导电,无效孔隙也导电,某些岩石骨架同样也导电.如何去除无效孔隙和其他各类岩石附加导电现象的影响,正确评价有效孔隙的贡献往往令人困惑.笔者发现：通过岩石电阻率计算地层因数只是在没有岩石附加导电环境下的特殊应用,在更为普适的条件下,地层因数实质是借助岩石电阻变化率反映孔隙连通性的重要参数.与物理学位移、速度的关系类似,电阻率和电阻变化率之间同样有着密切关系.这一观点的提出为在复杂孔隙结构条件下评价储层孔隙有效性提供了手段. 相似文献
6.
为了分析海洋中含金属矿的储油气砂层的成分、结构对于海洋可控源电磁场的影响特征,引入多相微增等效介质模型,结合非结构化网格实现了海洋可控源电磁三维矢量有限元正演.首先对多相微增模型进行了介绍,并分析不同参数影响下的等效电导率变化特征.而后,详细推导了频率域可控源电磁法非结构化矢量有限元方程.接着,利用预处理的IDR （s）迭代算法求解线性方程组.最后设计典型的海洋地电模型,通过正演计算,验证了本文算法的正确性和有效性,同时研究了海洋储油砂层中的金属矿的含量、孔隙度、含水饱和度等参数对于可控源电磁场响应特征的影响. 相似文献
7.
介绍了将混合理论用于结构泥质、将基于距离的升尺度(DBU)方法用于层状泥质电性研究的原理和方法,通过对实际岩心资料以及井资料的分析处理,证实了将混合理论用于结构泥质、将DBU方法用于层状泥质砂岩电性研究的合理性,最后利用上述方法进一步分析了泥质含量、泥质的分布形式等对泥质砂岩电阻率的影响及规律,研究结果表明:随着泥质含量的增加,泥质砂岩电阻率逐渐降低,且降低的幅度随含水饱和度的降低而增大;当测量电流方向与层状泥质垂直时,泥质对电性的影响较弱,但层状泥质和结构泥质的相对含量对结果的影响很大;当测量电流方向与层状泥质平行时,泥质对电性的影响较强,但层状泥质和结构泥质的相对含量对结果的影响不大. 相似文献
8.
Nishank Saxena Ronny Hofmann Seán Dolan Rituparna Sarker Chen Bao Stephan Gelinsky 《Geophysical Prospecting》2019,67(4):843-871
The measured geophysical response of sand – shale sequences is an average over multiple layers when the tool resolution (seismic or well log) is coarser than the scale of sand – shale mixing. Shale can be found within sand – shale sequences as laminations, dispersed in sand pores, as well as load bearing clasts. We present a rock physics framework to model seismic/sonic properties of sub-resolution interbedded shaly sands using the so-called solid and mineral substitution models. This modelling approach stays consistent with the conceptual model of the Thomas–Stieber approach for estimating volumetric properties of shaly sands; thus, this work connects established well log data-based petrophysical workflows with quantitative interpretation of seismic data for modelling hydrocarbon signature in sand – shale sequences. We present applications of the new model to infer thickness of sand – shale lamination (i.e., net to gross) and other volumetric properties using seismic data. Another application of the new approach is fluid substitution in sub-resolution interbedded sand–shale sequences that operate directly at the measurement scale without the need to downscale; such a procedure has many practical advantages over the approach of “first-downscale-and-then-upscale” as it is not very sensitive to errors in estimated sand fraction and end member sand/shale properties and remains stable at small sand/shale fractions. 相似文献
9.
Shaly sands reservoir is one of the most distributive types of the oil(gas)-bearing reservoirs discovered in China, and low resistivity oil(gas)-bearing reservoirs are mostly shaly sands reservoirs. Therefore, shaly sands reservoir conductive model is the key to evaluate low resistivity oil(gas)-bearing reservoirs using logging information. Some defects were found when we studied the clay distribution type conductive model, dual-water conductive model, conductive rock matrix model, etc. Some models could not distinguish the conductive path and nature of microporosity water and clay water and some models did not consider the clay distribution type and the mount of clay volume. So, we utilize the merits,overcome the defects of the above models, and put forward a new shaly sands conductive model-dual water clay matrix conductive model (DWCMCM) in which dual water is the free water and the microporosity water in shaly sands and the clay matrix(wet clay) is the clay grain containing water. DWCMCM is presented here, the advantages of which can tell the nature and conductive path from different water (microporosity water and freewater), in consid-eration of the clay distribution type and the mount of clay volume in shaly sands. So, the results of logging interpretation in the oil(gas)-bearing reservoirs in the north of Tarim Basin area, China with DWCMCM are better than those interpreted by the above models. 相似文献
10.
Vuggy reservoirs are the most common, albeit important heterogeneous carbonate reservoirs in China. However, saturation calculations using logging data are not well developed, whereas Archie method is more common. In this study, electrical conduction in a vuggy reservoir is theoretically analyzed to establish a new saturation equation for vuggy reservoirs. We found that vugs have a greater effect on saturation than resistivity, which causes inflection in the rock-electricity curve. Using single-variable experiments, we evaluated the effects of vug size, vug number, and vug distribution on the rock-electricity relation. Based on the general saturation model, a saturation equation for vuggy reservoirs is derived, and the physical significance of the equation parameters is discussed based on the seepage-electricity similarity. The equation parameters depend on the pore structure, and vugs and matrix pore size distribution. Furthermore, a method for calculating the equation parameters is proposed, which uses nuclear magnetic resonance (NMR) data to calculate the capillary pressure curve. Field application of the proposed equation and parameter derivation method shows good match between calculated and experimental results, with an average absolute error of 5.8%. 相似文献
11.
Heping Pan Jiaying Wang Zhengjun Fan Yong Ma Jianhua Liu Mingqiang Li 《中国科学D辑(英文版)》2001,44(4):346-355
Shaly sands reservoir is one of the most distributive types of the oil(gas)-bearing reservoirs discovered in China, and low resistivity oil(gas)-bearing reservoirs are mostly shaly sands reservoirs. Therefore, shaly sands reservoir conductive model is the key to evaluate low resistivity oil(gas)-bearing reservoirs using logging information. Some defects were found when we studied the clay distribution type conductive model, dual-water conductive model, conductive rock matrix model, etc. Some models could not distinguish the conductive path and nature of microporosity water and clay water and some models did not consider the clay distribution type and the mount of clay volume. So, we utilize the merits,overcome the defects of the above models, and put forward a new shaly sands conductive model—dual water clay matrix conductive model (DWCMCM) in which dual water is the free water and the microporosity water in shaly sands and the clay matrix(wet clay) is the clay grain containing water. DWCMCM is presented here, the advantages of which can tell the nature and conductive path from different water (microporosity water and free-water), in consideration of the clay distribution type and the mount of clay volume in shaly sands. So, the results of logging interpretation in the oil(gas)-bearing reservoirs in the north of Tarim Basin area, China with DWCMCM are better than those interpreted by the above models. 相似文献
12.
混合物电导率公式及其在测井解释中的应用 总被引：2，自引：1，他引：1
从电场的微分方程出发,得出了混合物电导率的两个公式:1.关于导体和导体形成的混合物的电导率公式;2.关于导体和绝缘体形成的混合物的电导率公式。将这两个公式应用于测井解释,对解释泥质砂岩的双水模型作了有效的改进。 相似文献
13.
Aamir Ali Zubair Matloob Hussain Khaista Rehman Muhammad Toqeer 《Acta Geophysica》2016,64(4):1139-1163
Shales can be distributed in sand through four different ways; laminated, structural, dispersed and any combination of these aforementioned styles. A careful analysis of well log data is required for the determination of shale distribution in sand affecting its reservoir quality. The objective of this study is to characterize the effect of shale distribution on reservoir quality of sands using well log data. The correlation of well data in terms of lithology has revealed four sand and three shale layers in Lower Goru Formation acting as a major reservoir in the study area. Our results indicate that the laminated type of shale distribution prevails at the Basal sand level, which does not affect its reservoir quality greatly. The remaining layers of variable vertical extent show a variety of shale distribution models affecting their reservoir quality adversely. We also present anisotropic rock physics modelling for AVA analysis at Basal sand level. 相似文献
14.
Ayumu Miyakawa Saneatsu Saito Yasuhiro Yamada Hitoshi Tomaru Masataka Kinoshita Takeshi Tsuji 《Island Arc》2014,23(2):142-156
The degree of gas hydrate saturation at Integrated Ocean Drilling Program (IODP) Site C0002 in the Kumano Basin, Nankai Trough, was estimated from logging‐while‐drilling logs and core samples obtained during IODP Expeditions 314 and 315. Sediment porosity data necessary for the calculation of saturation were obtained from both core samples and density logs. Two forms of the Archie equation (‘quick‐look’ and ‘standard’) were used to calculate gas hydrate saturation from two types of electrical resistivity log data (ring resistivity and bit resistivity), and a three‐phase Biot‐type equation was used to calculate gas hydrate saturation from P‐wave velocity log data. The gas hydrate saturation baseline calculated from both resistivity logs ranges from 0% to 35%, and that calculated from the P‐wave velocity log ranges from 0% to 30%. High levels of gas hydrate saturation (>60%) are present as spikes in the ring resistivity log and correspond to the presence of gas hydrate concentrations within sandy layers. At several depths, saturation values obtained from P‐wave velocity data are lower than those obtained from bit resistivity data; this discrepancy is related to the presence of free gas at these depths. Previous research has suggested that gas from deep levels in the Kumano Basin has migrated up‐dip towards the southern and seaward edge of the basin near Site C0002. The high saturation values and presence of free gas at site C0002 suggest that a large gas flux is flowing to the southern and seaward edge of the basin from a deeper and/or more landward part of the Kumano Basin, with the southern edge of the Kumano Basin (the location of site C0002) being the main area of fluid accumulation. 相似文献
15.
Mauro Mele Silvia Inzoli Mauro Giudici Riccardo Bersezio 《Geophysical Prospecting》2014,62(3):631-645
Electrical conductivity of alluvial sediments depends on litho‐textural properties, fluid saturation and porewater conductivity. Therefore, for hydrostratigraphic applications of direct current resistivity methods in porous sedimentary aquifers, it can be useful to characterize the prevailing mechanisms of electrical conduction (electrolytic or shale conduction) according to the litho‐textural properties and to the porewater characteristics. An experimental device and a measurement protocol were developed and applied to collect data on eight samples of alluvial sediments from the Po plain (Northern Italy), characterized by different grain‐size distribution, and fully saturated with porewater of variable conductivity. The bulk electrical conductivities obtained with the laboratory tests were interpreted with a classical two‐component model, which requires the identification of the intrinsic conductivity of clay particles and the effective porosity for each sample, and with a three‐component model. The latter is based on the two endmember mechanisms, surface and electrolytic conduction, but takes into account also the interaction between dissolved ions in the pores and the fluid‐grain interface. The experimental data and their interpretation with the phenomenological models show that the volumetric ratio between coarse and fine grains is a simple but effective parameter to determine the electrical behaviour of clastic hydrofacies at the scale of the representative elementary volume. 相似文献
16.
针对泥质砂岩黏土附加导电还没有综合定量评价指标的现状,从Archie公式和Waxman-Smits方程计算的含水饱和度的相对误差出发定义了黏土附加导电强度指数η,并考察了地层水电导率Cw、阳离子交换容量Qv、含水饱和度Sw、饱和度指数n对η的影响,给出了黏土附加导电强度判别方法和图版,通过低阻油气层的工程应用实例探讨了η在饱和度方程选取中的应用.结果表明,η随Cw、Sw、n值的增大而以近似乘幂规律减小,随Qv的增大而近似线性增大;Cw与Qv对η的影响最大,n与Sw次之;无法由单一因素判断黏土附加导电性强弱,必须综合考虑Qv、Cw、Sw、n的影响;对于低阻油气层,可利用该指数按照"三步法"及判别图版定量判断低阻成因并为饱和度模型的选取提供技术依据. 相似文献
17.
Spectral induced polarization as well as complex electrical measurements are used to estimate, on a non-invasive basis, hydraulic permeability in aquifers. Basic laboratory measurements on a variety of shaly sands, silts and clays showed that the main feature of their conductivity spectra in the frequency range from 10-3 to 103 Hertz is a nearly constant phase angle. Thus, a constant-phase-angle model of electrical conductivity is applied to interpret quantitatively surface and borehole spectral induced polarization measurements. The model allows for the calculation of two independent electrical parameters from only one frequency scan and a simple separation of electrical volume and interface effects. The proposed interpretation algorithm yields the true formation factor, the cation exchange capacity and the surface-area-to-porosity ratio, which corresponds to the inverse hydraulic radius. Using a Kozeny–Carman-like equation, the estimation of hydraulic permeability is possible. 相似文献
18.
本文论述三电阻率覆盖法,采用测量的地层电阻率与计算的水层电阻率和油层临界电阻率覆盖,提高了直观识别砂-泥岩剖面油、水层的准确性。 油田应用实例指出,三电阻率覆盖法能够有效地直观识别砂岩和泥质砂岩油、水层,计算油层有效含水饱和度,同时还能够有效地直观识别钙质砂岩地层。 相似文献
19.
用有限差分法计算各向异性介质中多分量感应测井的响应 总被引：16，自引：5，他引：11
感应测井电阻率是砂泥岩储层中定量评价含油气性的主要参数之一,然而由于储层电各向异性的存在,传统的感应测井仪得到的电阻率主要响应地层的水平电阻率,比地层的垂直电阻率小,由此计算的含水饱和度偏高．多分量感应测井则可以通过不同方向的发射和接收,测量多个分量,弥补上述缺陷,为储层的含油气性评价提供准确信息．本文用交错网格有限差分法导出了主轴各向异性介质中Maxwell方程的离散化关系式,计算了三维各向异性介质中多分量感应测井的电磁响应．利用三层模型的数值模拟,分析了不同磁场分量对各向异性介质的响应特性,用多层模型和倾斜各向异性地层的响应计算检验了所编制的交错网格有限差分法程序． 相似文献