共查询到20条相似文献，搜索用时 15 毫秒
1.
A new elastoplastic model called loading memory surface based on the critical state concept and the multi‐surface framework is proposed for geomaterials. The model uses a hypoelastic formulation and two plastic mechanisms. The formulations of the model are made in three‐dimensional stress–strain space and work under both monotonic and cyclic loadings. A newly introduced formalism makes it possible to obtain the cyclic response directly from the monotonic loading one. This formalism gives a three‐dimensional generalization of the well‐known Masing rule. The model has been validated against test results of Hostun sand under several conditions: monotonic and cyclic, drained and undrained, tests in compression and in extension, and at different confining pressures and different densities. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
2.
天然土体的初始各向异性通常可对其后继循环特性产生显著影响。现有考虑循环载荷作用的土体弹塑性模型,往往采用类似修正剑桥模型的椭圆形屈服面,已有研究表明,该椭圆形屈服面因其拉伸弹性区域偏大,针对天然K0固结状态的土体,其计算精度较差。基于新近提出的广义各向同性硬化准则,在边界面方程中引入初始各向异性张量,并采用空间滑动面破坏准则（SMP）的变换应力法,建立了能考虑饱和黏土初始各向异性的循环边界面塑性模型。分别针对等压和偏压固结的饱和黏土静、动三轴试验进行模拟,结果表明,该模型能合理反映土体的初始各向异性及其后继循环动力特性。 相似文献
3.
In this paper, there is presented an elastoplastic constitutive model to predict sandy soils behavior under monotonic and cyclic loadings. This model is based on an existing model (Cambou‐Jafari‐Sidoroff) that takes into account deviatoric and isotropic mechanisms of plasticity. The flow rule used in the deviatoric mechanism is non‐associated and a mixed hardening law controls the evolution of the yield surface. In this research the critical state surface and history surface, which separates the virgin and cyclic states in stress space, are defined. Kinematic hardening modulus and stress–dilatancy law for monotonic and cyclic loadings are effectively modified. With taking hardening modulus as a function of deviatoric and volumetric plastic strain and with defining the history surface and stress reversal, the model has the ability to predict the sandy soils' behavior. All of the model parameters have clear physical meanings and can be determined from usual laboratory tests. In order to validate the model, the results of homogeneous tests on Hostun and Toyoura sands are used. The results of validation show a good capability of the proposed model. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
4.
A database with about 60 undrained monotonic and cyclic triaxial tests on kaolin is presented. In the monotonic tests, the influences of consolidation pressure, overconsolidation ratio, displacement rate and sample cutting direction have been studied. In the cyclic tests, the stress amplitude, the initial stress ratio and the control (stress vs. strain cycles) have been additionally varied. Isotropic consolidation leads to a failure due to large strain amplitudes with eight-shaped effective stress paths in the final phase of the cyclic tests, while a failure due to an excessive accumulation of axial strain and lens-shaped effective stress paths was observed in the case of anisotropic consolidation with \(q^{\text{ ampl }}< |q^{\text{ av }}|\). The rate of pore pressure accumulation grew with increasing amplitude and void ratio (i.e. decreasing consolidation pressure and overconsolidation ratio). The “cyclic flow rule” well known for sand has been confirmed also for kaolin: With increasing value of the average stress ratio \(|\eta ^{\text{ av }}| = |q^{\text{ av }}|/p^{\text{ av }}, \) the accumulation of deviatoric strain becomes predominant over the accumulation of pore water pressure. The tests on the samples cut out either horizontally or vertically revealed a significant effect of anisotropy. In the cyclic tests, the two kinds of samples exhibited an opposite inclination of the effective stress path. Furthermore, the horizontal samples showed a higher stiffness and could sustain a much larger number of cycles to failure. All data of the present study are available from the homepage of the first author. They may serve for the examination, calibration or improvement in constitutive models dedicated to cohesive soils under cyclic loading, or for the development of new models. 相似文献
5.
This paper aims to assess the characteristics of the deformation and strength behavior of frozen soils at different temperatures under monotonic and cyclic triaxial conditions. The deformation and failure patterns of the specimens change from ductility to brittleness with decreasing temperatures under both monotonic and cyclic loadings. The development of axial strain and stiffness with increasing number of cycles for the soils under cyclic loading is presented and analyzed in detail. A collapse behavior in strength and stiffness is observed in tests of frozen soils at ??5 °C, ??7 °C and ??9 °C. The difference in frictional sliding between the samples with high ductility and those with high brittleness is attributed to the different patterns of deformation and failure. The dynamic modulus is plotted versus axial strain, and the state where the stiffness begins to decrease is employed as the criterion of cyclic failure. The proposed criterion of cyclic failure is verified to be more suitable for frozen soils with high brittleness and seems to be consistent with the peak strength under monotonic loading. Finally, the cyclic stress ratios are plotted against the number of cycles up to this failure criterion, and the effect of temperatures on cyclic strength is evaluated.
相似文献6.
For numerical studies of geotechnical structures under earthquake loading, aiming to examine a possible failure due to liquefaction, using a sophisticated constitutive model for the soil is indispensable. Such a model must adequately describe the material response to a cyclic loading under constant volume (undrained) conditions, amongst others the relaxation of effective stress (pore pressure accumulation) or the effective stress loops repeatedly passed through after a sufficiently large number of cycles (cyclic mobility, stress attractors). The soil behaviour under undrained cyclic loading is manifold, depending on the initial conditions (e.g. density, fabric, effective mean pressure, stress ratio) and the load characteristics (e.g. amplitude of the cycles, application of stress or strain cycles). In order to develop, calibrate and verify a constitutive model with focus to undrained cyclic loading, the data from high-quality laboratory tests comprising a variety of initial conditions and load characteristics are necessary. The purpose of these two companion papers was to provide such database collected for a fine sand. The database consists of numerous undrained cyclic triaxial tests with stress or strain cycles applied to samples consolidated isotropically or anisotropically. Monotonic triaxial tests with drained or undrained conditions have also been performed. Furthermore, drained triaxial, oedometric or isotropic compression tests with several un- and reloading cycles are presented. Part I concentrates on the triaxial tests with monotonic loading or stress cycles. All test data presented herein will be available from the homepage of the first author. As an example of the examination of an existing constitutive model, the experimental data are compared to element test simulations using hypoplasticity with intergranular strain. 相似文献
7.
For numerical studies of geotechnical structures under earthquake loading, aiming to examine a possible failure due to liquefaction, using a sophisticated constitutive model for the soil is indispensable. Such model must adequately describe the material response to a cyclic loading under constant volume (undrained) conditions, amongst others the relaxation of effective stress (pore pressure accumulation) or the effective stress loops repeatedly passed through after a sufficiently large number of cycles (cyclic mobility, stress attractors). The soil behaviour under undrained cyclic loading is manifold, depending on the initial conditions (e.g. density, fabric, effective mean pressure, stress ratio) and the load characteristics (e.g. amplitude of the cycles, application of stress or strain cycles). In order to develop, calibrate and verify a constitutive model with focus to undrained cyclic loading, the data from high-quality laboratory tests comprising a variety of initial conditions and load characteristics are necessary. It is the purpose of these two companion papers to provide such database collected for a fine sand. Part II concentrates on the undrained triaxial tests with strain cycles, where a large range of strain amplitudes has been studied. Furthermore, oedometric and isotropic compression tests as well as drained triaxial tests with un- and reloading cycles are discussed. A combined monotonic and cyclic loading has been also studied in undrained triaxial tests. All test data presented herein will be available from the homepage of the first author. As an example of the examination of an existing constitutive model, the experimental data are compared to element test simulations using hypoplasticity with intergranular strain. 相似文献
8.
An elasto-plastic model is proposed for modeling the constitutive behavior of the interface between gravelly soils and structural materials. This model is based on the two-surface plasticity formulation and it is compatible with the concept of critical state soil mechanics. The model requires the same set of eight calibration parameters for predicting the monotonic and cyclic responses of both loose and dense interfaces. The model simulates cyclic densification, shear degradation and the effects of normal pressure, soil density, and stress path. The performance of the proposed constitutive model is validated by tests data under different normal stresses and boundary conditions. 相似文献
9.
10.
沈珠江等在总结岩土材料的基本特性、分析理论和研究方法的基础上,提出了岩土破损力学理论框架和二元介质模型概念。基于岩土二元介质模型思想,近年来在试验、理论和数值模拟方面对结构性岩土材料进行了详细研究。通过对棒状和棱柱状结构块试件的平面试验,探讨了结构性岩土材料的破损机制,并发现了在受荷过程中结构块逐渐破损并转化为软弱带二者共同抵抗外部作用,即验证了二元介质模型对结构性岩土材料力学抽象的正确性;扩展了岩土二元介质模型对岩土材料的脆性变化进行了模拟,并与结构性土和砂岩的三轴试验结果进行了验证;基于二元介质模型概念,发展了一种模拟岩土材料破损过程的细观数值方法,同时提出了适用于结构性岩土材料的强度准则。 相似文献
11.
亚塑性模型为模拟颗粒材料的非线性力学行为提供了一条新途径,特别是CLoE亚塑性模型在模拟应变局部化时具有一定的优势。然而该模型在模拟小幅应力-应变循环时表现出一定的锯齿效应。为了克服该效应,基于颗粒间应变张量的概念发展了修正的CLoE亚塑性模型以正确模拟循环荷载下密砂的力学行为。此外,为保证单调荷载作用下修正模型与原模型预测结果的一致性,改进了颗粒间应变率及颗粒间最大应变的定义。数值算例表明:（1）修正模型保留了克服锯齿效应的优点。（2）修正模型能够反映不同振幅条件下的卸载刚度。（3）在大振幅循环条件下,滞回圈的面积随着循环次数增加而增大。（4）修正模型能够保证单调加载条件下所得结果与原模型的一致性。（5）修正模型可以反映材料的疲劳破坏机制。 相似文献
12.
Several researchers have reported that the mean effective stress of unsaturated soils having a relatively high degree of saturation gradually decreases under fully undrained cyclic loading conditions, and such soils can be finally liquefied like saturated soils. This paper describes a series of simulations of fully undrained cyclic loading on unsaturated soils, conducted using an elastoplastic model for unsaturated soils. This model is a critical state soil model formulated using effective stress tensor for unsaturated soils, which incorporates the following concepts: (a) the volumetric movement of the state boundary surface containing the critical state line owing to the variation in the degree of saturation; (b) the soil water characteristic curve considering the effects of specific volume and hydraulic hysteresis; and (c) the subloading surface concept for considering the effect of density. Void air is assumed to be an ideal gas obeying Boyle's law. The proposed model is validated through comparisons with past results. The simulation results show that the proposed model properly describes the fully undrained cyclic behavior of unsaturated soils, such as liquefaction, compression, and an increase in the degree of saturation. Finally, the effects of the degree of saturation, void ratio, and confining pressure on the cyclic strength of unsaturated soils are described by the simulation results. The liquefaction resistance of unsaturated soils increases as the degree of saturation and the void ratio decrease, and as the confining pressure increases. Furthermore, the degree of saturation has a greater effect on the liquefaction resistance than the confining pressure and void ratio. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
13.
分数阶微分理论在土体静力黏弹性本构模型中得到了广泛应用,然而,其在动力弹塑性模型中的应用尚不多见。为此,基于分数阶微积分理论分析了粗粒料在循环荷载下的变形特性,提出了粗粒料在循环荷载下的分数阶应变率;并以此为基础,进一步建立了粗粒料受静动力荷载作用下的边界面塑性力学本构模型。所提出模型包含10个参数,均可以运用常规三轴试验获得。为了验证所提出模型,选取了几种已有不同文献中的不同粗粒料试验数据进行了模拟,发现,所提出的模型可以较好地模拟粗粒料在静动力加载下的应力-应变行为,对于循环荷载下的长期变形也能较好地预测。 相似文献
14.
ISA model: A constitutive model for soils with yield surface in the intergranular strain space 
下载免费PDF全文
下载免费PDF全文 In this article, a new constitutive model for soils is proposed. It is formulated by means of plasticity, but in contrast to the precedent works, it presents a yield function describing a surface within the intergranular strain space. This latter is a state variable providing information of the recent strain history. An expression for the plastic strain rate has been proposed to guarantee the stress rate continuity. Under the application of medium or large strain amplitudes, the constitutive equation becomes independent of the intergranular strain and delivers a mathematical structure similar to some Karlsruhe hypoplastic models. Some simulations of monotonic and cyclic triaxial test are provided to evaluate and analyze the model performance. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
15.
A kinematic hardening mechanism has previously been proposed to capture the behavior of soil during large stress reversals in the triaxial plane. This mechanism is now extended to the principal stress space. It incorporates rotation and intersection of yield surfaces to achieve a consistent and physically rational fit with experimentally observed soil behavior during large three‐dimensional stress reversals. An existing elasto‐plastic model with isotropic hardening is used as the basic framework to which the rotational kinematic hardening mechanism has been added. The new combined model preserves the behavior of the isotropic hardening model under monotonic loading conditions, and the extension from isotropic to rotational kinematic hardening under three‐dimensional conditions is accomplished without introducing new material parameters. The framework of the model is presented here with some comparisons between theoretical and experimental directions of strain increment vectors to indicate the potential of the model. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
16.
The analysis of geotechnical problems involving saturated soils under cyclic loading requires the use of advanced constitutive models. These models need to describe the main characteristics of the material under cyclic loading and undrained conditions, such as the rate of the pore water pressure accumulation and the stress attractors. When properly doing so, the models are expected to be reliable for their use in boundary value problems. In this work, an extension of the widely implemented intergranular strain model by Niemunis and Herle (Mech Cohes Frict Mater 2(4):279–299, 1997) is proposed. The modification is aimed to improve the capabilities of the model when simulating a number of repetitive cycles, where a proper reduction of the strain accumulation is expected. For validation purposes, the reference model and proposed improvement are compared against some monotonic and cyclic triaxial tests. The results indicate that the intergranular strain improvement model provides a more realistic prediction of the accumulation rates under cyclic loading, without spoiling the advantages of the original formulation.
相似文献17.
Anisotropy in the onset of liquefaction and post liquefaction under cyclic loading condition causes the change in response behavior of the soil. The proposed model operates within the integration of sliding/opening/closing framework of 17 predefined planes as local deformation. This leads to the use of better stress/strain multilaminate histories with many directional effects on soil behavior specifically internal mechanism during pre and post-liquefaction. The ability of multilaminate model for fabric anisotropy has been proven by comparison with the experimental results under drain and undrained conditions and monotonic and cyclic loading. The effects of induced anisotropy was also investigated. 相似文献
18.
Soil liquefaction as a transformation of granular material from solid to liquid state is a type of ground failure commonly associated with moderate to large earthquakes and refers to the loss of strength in saturated, cohesionless soils due to the build-up of pore water pressures and reduction of the effective stress during dynamic loading. In this paper, assessment and prediction of liquefaction potential of soils subjected to earthquake using two different artificial neural network models based on mechanical and geotechnical related parameters (model A) and earthquake related parameters (model B) have been proposed. In model A the depth, unit weight, SPT-N value, shear wave velocity, soil type and fine contents and in model B the depth, stress reduction factor, cyclic stress ratio, cyclic resistance ratio, pore pressure, total and effective vertical stress were considered as network inputs. Among the numerous tested models, the 6-4-4-2-1 structure correspond to model A and 7-5-4-6-1 for model B due to minimum network root mean square errors were selected as optimized network architecture models in this study. The performance of the network models were controlled approved and evaluated using several statistical criteria, regression analysis as well as detailed comparison with known accepted procedures. The results represented that the model A satisfied almost all the employed criteria and showed better performance than model B. The sensitivity analysis in this study showed that depth, shear wave velocity and SPT-N value for model A and cyclic resistance ratio, cyclic stress ratio and effective vertical stress for model B are the three most effective parameters on liquefaction potential analysis. Moreover, the calculated absolute error for model A represented better performance than model B. The reasonable agreement of network output in comparison with the results from previously accepted methods indicate satisfactory network performance for prediction of liquefaction potential analysis. 相似文献
19.
In this study the effect of cyclic loads on monotonic shear strength has been studied on torsional apparatus. Tests have been conducted on both reconstituted and undisturbed fine-grained hollow soil specimens. The plasticity index of soils is in the range from 2 to 33 for reconstituted specimens, prepared by dry pluviation, and from 5 to 13 for undisturbed soil specimens. The existence of a critical shear strain level, called yield shear strain, where softening starts, is determined from cyclic tests. The level of cyclic yield strain is ± 0.75% for the reconstituted soil specimens and ± 0.5% for the undisturbed soils. If soil undergoes a cyclic shear strain level below the cyclic yield strain, reduction of monotonic strength of reconstituted and undisturbed specimens is limited, but when cyclic shear strain level is larger than yield strain monotonic strength decreases down to 40% of its initial strength. 相似文献
20.
In dynamic geotechnical problems, soils are often subjected to a combination of sustained static and fast cyclic loading. Under such loading conditions, saturated and normally consolidated clays generally experience a build-up of excess pore water pressure along with a degradation of stiffness and strength. If the strength of the soil falls below the static stress demand, a self-driven failure is triggered. In this paper, a constitutive model is presented for the analysis of such problems, based on a general multisurface plasticity framework. The hardening behavior, the initial arrangement of the surfaces, and the nonassociated volumetric flow rule are defined to capture important aspects of cyclic clay behavior. This includes nonlinear hysteretic stress-strain behavior, the effect of anisotropic consolidation, and the generation of excess pore water pressure during undrained cyclic loading along with a degradation of stiffness and strength. The model requires nine independent parameters, which can be derived from standard laboratory tests. A customized experimental program has been performed to validate the model performance. The model predictions show a good agreement with test results from monotonic and cyclic undrained triaxial tests, in particular with respect to the strain-softening response and the number of loading cycles to failure. A procedure for a general stress-space implicit numerical implementation for undrained, total stress-based finite element analyses is presented, including the derivation of the consistent tangent operator. Finally, a simulation of the seismic response of a submarine slope is shown to illustrate a possible application of the presented model. 相似文献