共查询到19条相似文献，搜索用时 203 毫秒
1.
2.
对水体散射特性的分析方法进行了研究,并以蓬莱附近海域水体为例对方法进行了验证.从分析结果可以看出,烟台蓬莱附近海域水体散射占据主导,单次散射反照率wo在06～0 8之间变化,且后向散射比例Bp在0.08～017间变化,虽高于Mobley给出的0 03的上限,但与Mie理论模拟计算的结果相吻合,属于具有强后向散射特征的Ⅱ类水体;该区域的粒子折射指数*np高于115,说明水体具有典型的矿物质颗粒特征.通过对实测数据的分析发现,文中提出的方法适合于我国近岸水体,可为研究我国近岸水体的水体散射特性提供借鉴. 相似文献
3.
北黄海QuikSCAT 卫星风速与浮标风速的对比分析 总被引：1，自引：0，他引：1
对北黄海QuikSCAT散射计矢量风资料与黄海实测浮标站风速资料进行对比分析,结果表明:北黄海QuikSCAT卫星风速和浮标观测风速的大小基本吻合,二者平均偏差是0.26 m/s,相关系数是0.74;风向偏差较大,平均偏差是117.52°。根据卫星风速和浮标风速的对比分析结果,提出了修正方案。修正后的QuikSCAT风向与实测浮标站风向的平均偏差显著提高到20.44°。该修正方案实施简单,修正效果显著,为更准确地使用卫星资料提供了保证。 相似文献
4.
为了解各向异性随机粗糙海面的微波双站散射机制及其特性，本文利用解析近似的积分方程模型以及一种改进的半经验海浪谱模型实现了对各向异性随机粗糙海面的全极化微波散射仿真模拟，并与卫星观测数据、经验的地球物理模式函数及已有的解析近似散射模型仿真结果进行了对比，验证了仿真结果的可行性和准确性。利用该模型分析了入射波频率、入射角、极化方式、海面风速及风向等参数对各向异性海面双站散射的影响。模拟结果表明，在不同的入射角、散射角及方位角等观测几何条件下，海面不同波段的双站散射表现出不同的空间散射特性，且对风速、风向等海面动力学参数表现出不同的敏感性，以L波段为例，海面向后半球双站散射在各个极化方式下都对风速较为敏感，而在同极化方式下，其对风向的响应在中低风速和高风速条件下相反，整体而言，低风速下海面双站散射对风向更为敏感。这表明对于海面动力参数的反演，双站散射可以提供比传统单站雷达后向散射更丰富的物理信息。本文探讨了各向异性海面微波双站散射特性，为基于主动式及分布式微波传感器的海洋动力参数遥感反演提供了理论分析基础。 相似文献
5.
6.
三种东海重要经济鱼类目标强度随角度变化的椭球体模型及实验测定的研究 总被引：2，自引：0，他引：2
采用椭球体近似模型对大黄鱼(Pseudosciaena crocea)、小黄鱼(P.polyactis)和银鲳(Pampus argenteus)的声散射特征进行了理论计算和研究。其中鱼鳔为充满气体的椭球体模型,鱼体为充满液体的椭球体模型。利用研制的散射角度可调的目标强度测量装置,对几种鱼种进行了目标强度随倾角变化关系研究。通过理论分析和实验对比,采用数据拟合的方法建立了3种鱼类目标强度随倾角变化的经验公式。研究表明,角度分布是影响目标强度的重要参数,目标强度最大值和最小值相差大于15d B,其最大值出现在–10°和10°之间,最小值出现在–40°以后。修正后的椭球体模型可以较好地反映目标强度的指向性,可以作为现场测定的重要补充。 相似文献
7.
基于相参X-波段海洋雷达的海表轮廓测量研究 总被引：4，自引：2，他引：2
X-波段海洋雷达测量所得海面散射单元的多普勒信息与散射单元的雷达视向速度密切相关。首先,基于符号多普勒估计方法,对X-波段雷达海面回波的多普勒频移信息进行了估计;在此基础上,应用各分辨单元回波的多普勒频移信息,建立了海浪表面轮廓的反演算法。该算法中,同时考虑了雷达入射角、方位角和雷达空间分辨率等因素对反演结果的影响。通过将反演结果与浮标测量数据相比较,发现雷达空间分辨率起到了类似低通滤波的作用,该作用对短重力波谱影响显著。同时,还应用加拿大麦克马斯特大学的IPIX雷达数据对海表轮廓进行了反演,并将反演所得有效波高、海浪周期与现场测量数据进行了比较,反演结果与现场测量结果吻合较好。 相似文献
8.
9.
海面有效波高(H1/3)是表征海浪的重要参数,随着卫星遥感技术的发展,雷达高度计已成为获取海面有效波高的重要手段,但也只能对卫星星下点轨迹处进行有效观测,远无法满足大范围应用的需求.本研究结合2013年10月HY-2雷达高度计观测的海面有效波高和微波散射计观测的海面风场资料,分别对高、低风速下风浪数据进行拟合,建立了适用于0~40 m/s风速范围内的南海海域风浪关系模型,经模型比对和结果验证,结果表明,基于HY-2卫星数据分析建立的南海海域风浪关系模型是可信的,特别是低风速的风浪模型与实测数据建立的风浪模型具有很好的一致性;根据建立的风浪关系模型,从卫星散射计大面观测的海面风场出发,能推算出风浪条件下海面有效波高的大面信息,数据覆盖远高于卫星高度计的星下点观测,能为分析和预报海浪、风暴潮灾害提供大范围的海面有效波高信息. 相似文献
10.
利用国际海-气综合数据集(ICOADS)中的海面风场实测数据作为真实值,对海洋二号卫星散射计风场产品进行真实性检验,得到初步结论:(1)在中、低风速条件下,海洋二号散射计风速与ICOADS实测风速具有较好一致性,但在较高风速条件下海洋二号散射计会出现风速低估现象;(2)海洋二号散射计风向与ICOADS实测风向的误差主要集中在-15°—15°范围内,在低风速条件下,海洋二号散射计与ICOADS两者风向存在较大偏差,风向多解也主要发生在低风速时;(3)在2—24 m/s风速条件下,剔除超过3个标准偏差风速样本后,海洋二号与ICOADS两者风速的平均绝对误差为1.36 m/s,均方根误差为1.92 m/s,若忽略风向多解的影响,两者风向的平均绝对误差为14.98°,均方根误差为20.21°。 相似文献
11.
提出了斜入射分层线性各向异性等离子体电磁散射的时域有限差分(FDTD)方法,通过将二维麦克斯韦方程等价地转换为一维麦克斯韦方程,避免了用二维时域有限差分方法分析该散射问题,极大地提高了计算效率.分析推导了TEz和TMz波斜入射线性分层各向异性等离子体电磁散射的FDTD方法,然后通过该方法计算不同入射角的各向异性等离子板的电磁波反射系数,并与其解析解进行比较,结果表明该方法的准确性和有效性.最后,将该算法应用于计算涂覆分层各向异性等离子 相似文献
12.
Compared with traditional real aperture microwave radiometers, one-dimensional synthetic aperture microwave radiometers have higher spatial resolution. In this paper, we proposed to retrieve sea surface temperature using a one-dimensional synthetic aperture microwave radiometer that operates at frequencies of 6.9 GHz, 10.65 GHz,18.7 GHz and 23.8 GHz at multiple incidence angles. We used the ERA5 reanalysis data provided by the European Centre for Medium-Range Weather Forecasts and a radiation transmission forward model to calculate the model brightness temperature. The brightness temperature measured by the spaceborne one-dimensional synthetic aperture microwave radiometer was simulated by adding Gaussian noise to the model brightness temperature.Then, a backpropagation(BP) neural network algorithm, a random forest(RF) algorithm and two multiple linear regression algorithms(RE1 and RE2) were developed to retrieve sea surface temperature from the measured brightness temperature within the incidence angle range of 0°–65°. The results show that the retrieval errors of the four algorithms increase with the increasing Gaussian noise. The BP achieves the lowest retrieval errors at all incidence angles. The retrieval error of the RE1 and RE2 decrease first and then increase with the incidence angle and the retrieval error of the RF is contrary to that of RE1 and RE2. 相似文献
13.
《Coastal Engineering》2006,53(10):865-877
An analytical theory is developed for the wave setup and setdown induced by obliquely incident waves on an impermeable swell-built beach profile. The wave setup and setdown are found to decrease as wave obliquity increases. The incorporation of wave obliquity in wave setup and setdown formulation offers the physical reality in engineering applications. The general solutions presented in this paper yield the limiting case of normal wave incidence and the result is consistent with the classical theories published. The present theory is primarily applicable to the spilling and plunging breaker across the surf zone, within which wave amplitude is assumed to be linearly related to the local water depth. Experiments were conducted in a large-scale wave basin to compare with theoretical results and especially to investigate the applicability of this assumption to the case of obliquely incident waves. The dimensionless setup versus the distance offshore within the surf zone is found to depend on wave breaking angle and the shape of the beach profile; and it has a non-zero value at the original shoreline position. This implies that the original shoreline will advance landwards, and that the extent of this movement can be related to wave angle at breaking and the beach profile under consideration. The results of the present theory are in good agreement with experimental data and field measurements available. 相似文献
14.
考虑波浪的浅水变化、折射、绕射、反射和破碎等现象的影响,以文氏谱作为输入谱,建立了浅水区域随机波浪传播变形的改进数值模型。对日照帆船港港域波高的数值计算结果表明:在没有越浪的情况下,计算值与物理模型试验观测值吻合。改进的数值模型成为求解港口水域波高的1种有效方法。 相似文献
15.
This paper presents a method to statistically predict the magnitude of impact pressure (including extreme values) produced by deep water waves breaking on a circular cylinder representing a column of an ocean structure. Breaking waves defined here are not those whose tops are blown off by the wind but those whose breaking is associated with steepness. The probability density function of wave period associated with breaking waves is derived for a specified wave spectrum, and then converted to the probability density function of impact pressure. Impacts caused by two different breaking conditions are considered; one is the impact associated with waves breaking in close proximity to the column, the other is an impact caused by waves approaching the column after they have broken. As an example of the application of the present method, numerical computations are carried out for a wave spectrum obtained from measured data in the North Atlantic. 相似文献
16.
17.
Dano E.B. Lyzenga D.R. Meadows G. Meadows L. Van Sumeren H. Onstott R. 《Oceanic Engineering, IEEE Journal of》2001,26(2):201-215
For Pt. I see ibid. vol. 26, pp. 181-200 (2001). This paper describes the results of experimental investigations into the microwave backscatter from mechanically generated transient breaking waves. The investigations were carried out in a 110 m×7.6 m×4 m deep model basin, utilizing chirped wave packets spanning 0.75-1.75 Hz. Backscatter measurements were taken by a K-band continuous wave radar (24.125 GHz) at 40° angle of incidence, and at azimuth angles of 0°, 45°, 90°, 135° and 180° relative to the direction of wave propagation. Grazing measurements were conducted using an X-band (10.525 GHz) FMCW radar at 85° angle of incidence, and azimuth angles of 0° and 180°. Results show that the maximum radar backscatter was obtained in the upwave direction prior to wave breaking and was caused by the specular or near specular presentation of the wave to the radar. After breaking, the backscatter transitioned from a specular or near-specular dominated scattering, primarily seen in the upwave direction, to a small scale roughness dominated scattering, observed at all azimuths. Physical optics solutions were found to correctly predict the backscatter for the specular or near-specular dominated scattering and the small perturbation method was found to accurately model the VV polarization post-break radar backscatter 相似文献
18.
Implementation and evaluation of alternative wave breaking formulas in a coastal spectral wave model 总被引：2，自引：0，他引：2
This paper describes methods and results of research for incorporating four different parameterized wave breaking and dissipation formulas in a coastal wave prediction model. Two formulations assume the breaking energy dissipation to be limited by the Rayleigh distribution, whereas the other two represent the breaking wave energy by a bore model. These four formulations have been implemented in WABED, a directional spectral wave model based on the wave action balance equation with diffraction, reflection, and wave–current interaction capabilities. Four parameterized wave breaking formulations are evaluated in the present study using two high-quality laboratory data sets. The first data set is from a wave transformation experiment at an idealized inlet entrance, representing four incident irregular waves in a slack tide and two steady-state ebb current conditions. The second data set is from a laboratory study of wave propagation over a complex bathymetry with strong wave-induced currents. Numerical simulation results show that with a proper breaking formulation the wave model can reproduce laboratory data for waves propagating over idealized or complicated bathymetries with ambient currents. The extended Goda wave breaking formulation with a truncated Rayleigh distribution, and the Battjes and Janssen formulation with a bore model produced the best agreement between model and data. 相似文献
19.
Based on the wave breaking model by Li and Wang (1999), this work is to apply Dally‘ s analytical solution to the wave-height decay instead of the empirical and semi-empirical hypotheses of wave-height distribution within the wave breaking zone. This enhances the applicability of the model. Computational results of shoaling, location of wave breaking, wave-height decay after wave breaking, set-down and set-up for incident regular waves are shown to have good agreement with experimental and field data. 相似文献