共查询到20条相似文献，搜索用时 31 毫秒
1.
For numerical studies of geotechnical structures under earthquake loading, aiming to examine a possible failure due to liquefaction, using a sophisticated constitutive model for the soil is indispensable. Such a model must adequately describe the material response to a cyclic loading under constant volume (undrained) conditions, amongst others the relaxation of effective stress (pore pressure accumulation) or the effective stress loops repeatedly passed through after a sufficiently large number of cycles (cyclic mobility, stress attractors). The soil behaviour under undrained cyclic loading is manifold, depending on the initial conditions (e.g. density, fabric, effective mean pressure, stress ratio) and the load characteristics (e.g. amplitude of the cycles, application of stress or strain cycles). In order to develop, calibrate and verify a constitutive model with focus to undrained cyclic loading, the data from high-quality laboratory tests comprising a variety of initial conditions and load characteristics are necessary. The purpose of these two companion papers was to provide such database collected for a fine sand. The database consists of numerous undrained cyclic triaxial tests with stress or strain cycles applied to samples consolidated isotropically or anisotropically. Monotonic triaxial tests with drained or undrained conditions have also been performed. Furthermore, drained triaxial, oedometric or isotropic compression tests with several un- and reloading cycles are presented. Part I concentrates on the triaxial tests with monotonic loading or stress cycles. All test data presented herein will be available from the homepage of the first author. As an example of the examination of an existing constitutive model, the experimental data are compared to element test simulations using hypoplasticity with intergranular strain. 相似文献
2.
For numerical studies of geotechnical structures under earthquake loading, aiming to examine a possible failure due to liquefaction, using a sophisticated constitutive model for the soil is indispensable. Such model must adequately describe the material response to a cyclic loading under constant volume (undrained) conditions, amongst others the relaxation of effective stress (pore pressure accumulation) or the effective stress loops repeatedly passed through after a sufficiently large number of cycles (cyclic mobility, stress attractors). The soil behaviour under undrained cyclic loading is manifold, depending on the initial conditions (e.g. density, fabric, effective mean pressure, stress ratio) and the load characteristics (e.g. amplitude of the cycles, application of stress or strain cycles). In order to develop, calibrate and verify a constitutive model with focus to undrained cyclic loading, the data from high-quality laboratory tests comprising a variety of initial conditions and load characteristics are necessary. It is the purpose of these two companion papers to provide such database collected for a fine sand. Part II concentrates on the undrained triaxial tests with strain cycles, where a large range of strain amplitudes has been studied. Furthermore, oedometric and isotropic compression tests as well as drained triaxial tests with un- and reloading cycles are discussed. A combined monotonic and cyclic loading has been also studied in undrained triaxial tests. All test data presented herein will be available from the homepage of the first author. As an example of the examination of an existing constitutive model, the experimental data are compared to element test simulations using hypoplasticity with intergranular strain. 相似文献
3.
The analysis of geotechnical problems involving saturated soils under cyclic loading requires the use of advanced constitutive models. These models need to describe the main characteristics of the material under cyclic loading and undrained conditions, such as the rate of the pore water pressure accumulation and the stress attractors. When properly doing so, the models are expected to be reliable for their use in boundary value problems. In this work, an extension of the widely implemented intergranular strain model by Niemunis and Herle (Mech Cohes Frict Mater 2(4):279–299, 1997) is proposed. The modification is aimed to improve the capabilities of the model when simulating a number of repetitive cycles, where a proper reduction of the strain accumulation is expected. For validation purposes, the reference model and proposed improvement are compared against some monotonic and cyclic triaxial tests. The results indicate that the intergranular strain improvement model provides a more realistic prediction of the accumulation rates under cyclic loading, without spoiling the advantages of the original formulation. 相似文献
4.
The ISA-plasticity is a mathematical platform which allows to propose constitutive models for soils under a wide range of strain amplitudes. This formulation is based on a state variable, called the intergranular strain, which is related to the strain recent history. The location of the intergranular strain can be related to the strain amplitude, information which is used to improve the model for the simulation of cyclic loading. The present work proposes an ISA-plasticity-based model for the simulation of saturated clays and features the incorporation of a viscous strain rate to enable the simulation of the strain rate dependency. The work explains some aspects of the ISA-plasticity and adapts its formulation for clays. At the beginning, the formulation of the model is explained. Subsequently, some comments about its numerical implementation and parameters determination are given. Finally, some simulations are performed to evaluate the model performance with two different clays, namely a Kaolin clay and the Lower Rhine clay. The simulations include monotonic and cyclic tests under oedometric and triaxial conditions. Some of these experiments include the variation of the strain rate to evaluate the viscous component of the proposed model. 相似文献
5.
Gas hydrate bearing sediments (HBS) are natural soils formed in permafrost and sub-marine settings where the temperature and pressure conditions are such that gas hydrates are stable. If these conditions shift from the hydrate stability zone, hydrates dissociate and move from the solid to the gas phase. Hydrate dissociation is accompanied by significant changes in sediment structure and strongly affects its mechanical behavior (e.g., sediment stiffenss, strength and dilatancy). The mechanical behavior of HBS is very complex and its modeling poses great challenges. This paper presents a new geomechanical model for hydrate bearing sediments. The model incorporates the concept of partition stress, plus a number of inelastic mechanisms proposed to capture the complex behavior of this type of soil. This constitutive model is especially well suited to simulate the behavior of HBS upon dissociation. The model was applied and validated against experimental data from triaxial and oedometric tests conducted on manufactured and natural specimens involving different hydrate saturation, hydrate morphology, and confinement conditions. Particular attention was paid to model the HBS behavior during hydrate dissociation under loading. The model performance was highly satisfactory in all the cases studied. It managed to properly capture the main features of HBS mechanical behavior and it also assisted to interpret the behavior of this type of sediment under different loading and hydrate conditions. 相似文献
6.
为探讨水化状态对饱和压实膨胀土应力-应变-强度特征的影响,以压实度为95%的荆门弱膨胀土为研究对象,开展了2种典型水化状态下的固结与三轴试验,其中第1种水化状态采用常规饱和方法,第2种水化状态为试样自由膨胀至稳定状态。结果表明：（1）受变形约束条件与渗径的影响,不同水化状态下体膨胀率有较大差别;（2）第2种水化状态下的饱和压实膨胀土具有更大的硬化指数λ与膨胀指数κ、较小的弹性剪切模量,其有效内摩擦角为第1种水化状态下的77.2%,体现出膨胀土饱和强度的变动性;（3）2种水化状态下的固结曲线均呈现出明显的屈服现象,其屈服应力分别为123.2 kPa与94.5 kPa;（4）第1种水化状态下,低围压下试样应变软化与剪胀,高围压下应变强化与剪缩;第2种水化状态下试验围压范围内均发生剪缩和轻微的应变软化;（5）2种水化状态下试样在固结与剪切过程中均表现出超固结性,这种超固结性并非完全由先期固结压力所致,而是试样受荷过程中膨胀受到约束造成的;（6）不同水化饱和状态下初始孔隙比不同,膨胀势也不同,膨胀势与外部约束条件、排水条件、应力状态相互作用,造成其应力-应变-强度特征的差异性。 相似文献
7.
This paper presents a kinematic hardening model for describing some important features of natural stiff clays under cyclic loading conditions, such as closed hysteretic loops, smooth transition from the elastic behavior to the elastoplastic one and changes of the compression slope with loading/unloading loops. The model includes two yield surfaces, an inner surface and a bounding surface. A non-associated flow rule and a kinematic hardening law are proposed for the inner surface. The adopted hardening law enables the plastic modulus to vary smoothly when the kinematic yield surface approaches the bounding surface and ensures at the same time the non-intersection of the two yield surfaces. Furthermore, the first loading, unloading, and reloading stages are treated differently by applying distinct hardening parameters. The main feature of the model is that its constitutive equations can be simply formulated based on the consistency condition for the inner yield surface based on the proposed kinematic hardening law; thereby, this model can be easily implemented in a finite element code using a classic stress integration scheme as for the modified Cam Clay model. The simulation results on the Boom Clay, natural stiff clay, have revealed the relevance of the model: a good agreement has been obtained between simulations and the experimental results from the tests with different stress paths under cyclic loading conditions. In particular, the model can satisfactorily describe the complex case of oedometric conditions where the deviator stress is positive upon loading (compression) but can become negative upon unloading (extension). 相似文献
8.
This study presents a sophisticated elastoplastic constitutive model for unsaturated soil using Bishop-type skeleton stress and degree of saturation as state variables in the framework of critical state soil mechanism. The model is proposed in order to describe the coupled hydromechanical behavior of unsaturated soil irrespective of what kind of the loadings or the drainage conditions may be. At the same time, a water retention characteristic curve considering the influence of deformation on degree of saturation is also proposed. In the model, the superloading and subloading concepts are introduced to consider the influences of overconsolidation and structure on deformation and strength of soils. The proposed model only employs nine parameters, among which five parameters are the same as those used in Cam-Clay model. The other four parameters have the clear physical meanings and can be easily determined by conventional soil tests. The capability and accuracy of the proposed model have been validated carefully through a series of laboratory tests such as isotropic loading tests and triaxial monotonic and cyclic compression tests under different mechanical and hydraulic conditions. 相似文献
9.
Cavity expansion theory assists in the interpretation of in situ tests including the cone penetration test and pressuremeter test. In this paper, a cavity expansion analysis is presented for unsaturated silty sand exhibiting hydraulic hysteresis. The similarity technique is used in the analysis. The soil stress–strain behaviour is described by a bounding surface plasticity model. Results of oedometric compression tests, isotropic compression tests and triaxial shear tests for both saturated and unsaturated states are used to calibrate the model. The void ratio, suction, degree of saturation and effective stress are fully coupled in the analysis. The influence of where the initial hydraulic state is located on the soil–water characteristic curve on the cavity wall pressure is investigated and found to be significant. Also, the effects of three different drainage conditions (constant suction, constant moisture content and constant contribution of suction to the effective stress) on cavity wall pressure are studied. It is found that the drainage condition in which the contribution of suction to the effective stress is constant offers a good approximation to the other two. This may simplify interpretation of in situ tests. When testing occurs quickly, meaning a constant moisture content condition prevails, a constant contribution of suction condition can be assumed without loss of significant accuracy. The contribution of suction assumed in the interpretation can be taken as being equal to the in situ value, although this discovery may not be applicable to all soil types, constitutive models and soil–water characteristic curves. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
10.
This paper presents a two-surface plasticity model for describing some important features of saturated clay under cyclic loading conditions, such as closed hysteresis loops, cyclic shakedown and degradation, and different stress–strain relations for two-way loading. The model, namely ACC-2-C, is based on the elastoplastic model ACC-2 (an adapted Modified Cam Clay model with two yield surfaces) developed by Hong et al. (Acta Geotech 11(4):871–885, 2015). The small-strain nonlinearity concept is adopted to achieve the nonlinear characteristics of clay during unloading–loading stage. The new hardening law related to accumulated deviatoric plastic strain is proposed for the inner surface to describe the cyclic shakedown and degradation. Following the advantages of the ACC-2 model, the constitutive equations are simply formulated based on the consistency condition for the inner yield surface. The model is conveniently implemented in a finite element code using a stress integration scheme similar to the Modified Cam Clay model. The simulation results are highly consistent with experimental data from drained and undrained isotropic cyclic triaxial tests in normally consolidated saturated clay under both one-way and two-way loadings. 相似文献
11.
The hydro-mechanical behaviour of a reconstituted unsaturated soil under different suctions and strain rates was studied through various rate-controlled unsaturated/undrained triaxial tests. The fully saturated reconstituted specimens were desaturated to four different initial suctions (s0?=?0, 100 kPa, 200 kPa and 300 kPa) and then triaxially sheared (conventional triaxial compression) at three different strain rates in undrained conditions (\(\dot{\varepsilon }_{1} = 0.001\) h?1, 0.01 h?1, and 0.1 h?1). The observed hydro-mechanical behaviour during shearing including the volumetric strain, deviatoric stress, degree of saturation and suction is presented and discussed in this paper. The results indicate that when the strain rate rises at the given initial suctions (or pore water pressures), the maximum deviatoric stress (qmax), critical net stress ratio (M) and critical state suction (sc) increase but the degree of saturation (Src) and volumetric strain at the critical state (εcv
) reduce. The critical effective stress ratio (M′) is not dependent on the strain rate for saturated and unsaturated samples. The critical state lines for unsaturated soils with the constant strain rates are parallel with each other in the e???lnp′ space. 相似文献
12.
A constitutive model for crushed salt is presented in this paper. A creep constitutive model is developed first and compared with test results. The constitutive model presented here concentrates on creep deformation because saline media behave basically in a ductile and time‐dependent way. An idealized geometry is used as a common framework to obtain stress–strain macroscopic laws based on two deformation mechanisms: fluid‐assisted diffusional transfer creep and dislocation creep. The model is able to predict strain rates that compare well with results from laboratory tests under isotropic and oedometric conditions. Macroscopic laws are written using a non‐linear viscous approach, which incorporates also a viscoplastic component, based on critical state theory. The viscoplastic term is intended for non‐creep deformation mechanisms such as grain reorganization and crushing. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
13.
This paper reports some results of a large experimental program on Boom Clay conducted in Grenoble in the framework of the European project SELFRAC. The program included isotropic compression up to relatively high stress, drained triaxial compression tests at different cell pressures, as well as permeability measurements under isotropic and deviatoric stress. Local measurement of axial and radial displacements allowed the detection of strain localization during deviatoric loading. The permeability of Boom Clay is found to depend on the mean effective stress. The response of Boom Clay during deviatoric loading appears to be strongly affected by the swelling experienced during the isotropic stage preceding triaxial compression. The rate of swelling decreases with isotropic stress. The longer the swelling before shear, more the response under shear becomes ductile and the lower the initial stiffness. Permeability depends on the mean effective stress and it is found to decrease of about two orders of magnitude when the mean stress increases from 1 to 32 MPa. Permeability during shear loading is essentially constant and does not seem to be affected by strain localization. These results are complemented by a few observations obtained using X-ray microtomography in the framework of the more recent European project TIMODAZ. These findings illustrate the impact of pre-existing inclusions and fissures on specimen deformation upon deviatoric loading in the laboratory. 相似文献
14.
采用非线性弹塑黏性有限元法模拟了砂土地基变速率加载室内试验,再现了砂土地基荷载-沉降曲线对加载速率突变、砂土蠕变以及应力松弛等加载情况下的响应和瞬时黏性中砂土黏性随加载进行的衰减现象。在有限元分析中,以非线性三要素模型为理论框架构建了可以综合考虑砂土黏性特性的弹塑黏性本构模型,用动态松弛法进行有限元求解,最后通过有限元与室内试验的对比分析研究了砂土地基所具有的黏性特性,同时验证了非线性三要素弹塑黏性模型用于模拟砂土黏性特征的合理性和正确性。 相似文献
15.
This study presents a simple approach to modelling the effect of temperature on the deformation and strength of unsaturated/saturated soils by using the average skeleton stress and degree of saturation. The concept of thermo-induced equivalent stress is introduced to consider the influence of temperature on the pre-consolidated stress. A skeleton stress–saturation framework is applied to enable the model to describe the thermo-elastoplastic behaviour of both unsaturated and saturated soils, as the skeleton stress can smoothly shift to Terzaghi’s effective stress if saturation changes from the unsaturated to the saturated condition. The new model only employs seven parameters, of which five parameters are the same as those used in the Cam-Clay model. The other two parameters can be easily determined by oedometer tests and simple thermo-mechanical tests. Numerical simulations of isotropic loading tests and triaxial shear tests under different conditions are conducted to illustrate the performance of the proposed model. By comparing with experimental temperature controlled oedometer tests and triaxial tests, it is confirmed that the proposed model is able to capture the thermo-mechanical behaviour of unsaturated/saturated normally and over-consolidated soils with a set of unified parameters. 相似文献
16.
In this study, the inclined sandstone specimen is introduced into cyclic loading tests to fulfill the coupled compression-shear loading state. 21 cyclic coupled compression-shear loading tests are conducted on inclined specimens under different loading conditions, including maximum stress levels ranging in 0.80, 0.85, 0.90 and 0.95, and amplitude levels varying in 0.40, 0.50, 0.60 and 0.70. Our testing results systematically revealed the influence of cyclic loading parameters on fatigue mechanical response of rocks under coupled compression-shear loading, regarding the deformation characteristics, energy evolution, damage variable and failure mechanism. Under higher maximum stress or cyclic amplitude, inclined rocks are characterized by larger elastic modulus and higher dissipated energy, resulting in less irreversible strain, faster damage accumulation and shorter fatigue life. Furthermore, a fatigue life prediction method is proposed based on the energy dissipation, and its reliability is verified by comparing with experimental results. In addition, the progressive cracking behavior of rocks is analyzed during the fatigue tests by virtue of digital image correlation technique. Under cyclic coupled compression-shear loading, rock specimens are featured by a prominent shear-dominated failure along its short diagonal direction combined with local tensile damage along the loading orientation. 相似文献
17.
地下洞室开挖围岩经历典型径向卸载、环向加载应力路径,由此引起的岩体强度、变形特征和破坏机制也不尽相同。针对锦屏二级水电站高地应力赋存环境,对施工排水洞大理岩开展常规单轴全应变、三轴压缩、卸围压、卸围压-加载轴压等4种不同应力路径力学试验,得到应力-应变全过程曲线、变形破坏特征和极限储能变化规律。试验研究结果表明, （1）锦屏二级水电站大理岩破坏时轴向应变一般较小,为硬脆性材料,卸荷应力路径下该脆性特征更为明显;（2）卸围压同时加载轴压试验峰值强度对应轴向应变、环向应变及体积应变值一般高于单纯的卸围压值,而对应峰值强度则一般低于卸围压值;（3）卸荷速率较大时,变形模量越大,大理岩峰值强度越低。加载速率越大,变形模量越小,峰值强度越高。初始围压越高,变形模量值越低,峰值强度越高;（4）无侧限作用时试件主要为张拉破坏,低侧限作用时为剪切破坏为主,局部存在张拉破坏,较高侧限时,剪切面为典型X或Y型;（5）岩石试件具有极限储能值,该值受多种因素的影响。一般情况下试件破坏对应围压越高,极限储能值越高,卸载速率越大,极限储能值越小。研究结果对于岩爆孕育发生机制解释以及工程实际问题的解决均有参考价值。 相似文献
18.
Since cross-anisotropic sand behaves differently when the loading direction or the stress state changes, the influences of the loading direction and the intermediate principal stress ratio ( b = ( σ 2 ? σ 3)/( σ 1 ? σ 3)) on the initiation of strain localization need study. According to the loading angle (angle between the major principal stress direction and the normal of bedding plane), a 3D non-coaxial non-associated elasto-plasticity hardening model was proposed by modifying Lode angle formulation of the Mohr–Coulomb yield function and the stress–dilatancy function. By using bifurcation analysis, the model was used to predict the initiation of strain localization under plane strain and true triaxial conditions. The predictions of the plane strain tests show that the major principal strain at the bifurcation points increases with the loading angle, while the stress ratio decreases with the loading angle. According to the loading angle and the intermediate principal stress ratio, the true triaxial tests were analyzed in three sectors. The stress–strain behavior and the volumetric strain in each sector can be well captured by the proposed model. Strain localization occurs in most b value conditions in all three sectors except for those which are close to triaxial compression condition ( b = 0). The difference between the peak shear strength corresponding to the strain localization and the ultimate shear strength corresponding to plastic limit becomes obvious when the b value is near 0.4. The influence of bifurcation on the shear strength becomes weak when the loading direction changes from perpendicular to the bedding plane to parallel. The bifurcation analysis based on the proposed model gives out major principal strain and peak shear strength at the initiation of strain localization; the given results are consistent with experiments. 相似文献
19.
为研究部分饱和状态下高填方回填土工后长期变形,对非饱和压实土在可控基质吸力下分别开展率敏性和蠕变试验,并分析两者间时效对应关系。率敏性试验采取不同加载速率的三轴剪切,分析基质吸力（0、100、200、300 kPa）、加载速率（0.40、0.02 mm/min）以及超固结比（1、4和8）对土体强度和变形特征的影响,并确定三轴剪切蠕变的三级加载应力水平为抗剪强度的0.45、0.65、0.85倍;在4种可控基质吸力（0、100、200、300 kPa）下参考陈氏加载法,按三应力水平分级加载开展非饱和压实土三轴剪切蠕变试验。试验结果表明：随着基质吸力的增加,其率敏性参数 ρ 减小,其率敏性降低;随着基质吸力逐渐增大,其蠕变初始最大速率、稳定蠕变速率以及蠕变变形量均显著减小;蠕变试验确定的应变速率−应变关系线与率敏性试验获得的应变速率−应变数据点基本吻合,证明两者间存在一定时效对应关系,且随着基质吸力的增大,这种时效对应关系更显著。 相似文献
20.
The main objective of this paper is to examine how different engineering soils react to environmental variations and to provide correlations to characterize their behaviour under null external mechanical stress. Two French and two Algerian soils with liquid limits ranging from 36 to 112 were prepared under both slurry and Proctor compaction conditions, and then subjected to drying–wetting paths with suction controlled from several kPa to several hundreds of MPa. Experimental results are presented in five diagrams to show globally and simultaneously the shrinkage–swelling, saturation–desaturation and water retention characteristics. A reasonable consistency was observed between the oedometric and drying curves of slurry, confirming the equivalence between hydraulic loading (suction) and mechanical loading (consolidation stress) on the volume change behaviour of different soils. As an intrinsic parameter of soil nature, liquid limit was found to have a significant influence on the shrinkage limit, air-entry suction and compressibility of both slurry and compacted samples. For that reason, correlations between these characteristics and liquid limit were set up, providing a good basis for a first estimation of the drying–wetting curves. At the micro-scale, new experimental results were obtained: either on drying or wetting path, the micro-pores were almost unaffected, whereas, when matrix suction increased from 0.1 to 8 MPa, the volume of macro-pores decreased to quasi-closure. At last, the analogy between the compaction and drying–wetting curves, and the comparison of different methods to determine the water retention curve were addressed. Such analogies and comparisons contribute to a better understanding of the mechanisms of mechanical stress and suction. 相似文献
|
下载免费PDF全文