共查询到20条相似文献，搜索用时 31 毫秒
1.
In the case of onshore data sets, the acquired reflection events can be strongly impaired due to rough top‐surface topography and inhomogeneities in the uppermost low‐velocity layer, the so‐called weathering layer. Without accounting for these influences, the poor data quality will make data processing very difficult. Usually, the correction for the top‐surface topography is not perfect. The residuals from this correction and the influence of the weathering layers lead to small distortions along the reflection events. We integrated a residual static correction method into our data‐driven common‐reflection‐surface‐stack‐based imaging workflow to further eliminate such distortions. The moveout‐corrected traces and the stacked pilot trace are cross‐correlated to determine a final estimate of the surface‐consistent residual statics in an iterative manner. As the handling of top‐surface topography within the common‐reflection‐surface stack is discussed in a separate paper in this special issue, the corresponding residual static correction will be explained in more detail. For this purpose, the results obtained with a data set from the Arabian Peninsula will be presented. 相似文献
2.
在地表地形复杂的情况下,静校正不易做好,这是制约山地资料处理质量的一个很重要的因素.复杂地表共反射面元（CRS）叠加不需对叠前数据做静校正,而且在得到叠加剖面后可以利用叠加得到的波场参数剖面实现基准面重建.地震数据的试算表明,复杂地表CRS叠加得出的剖面与常规处理剖面相比有着较高的信噪比和同相轴连续性.与水平地表CRS叠加不同的是,在复杂地表CRS叠加的时距公式中,波场三参数耦合,难以通过简化CRS道集的方法将它们全部分离并逐个优化.引入模拟退火算法后,有效地解决了这一组合优化的难题. 相似文献
3.
We apply a redatuming methodology, designed to handle rugged topography and the presence of high‐velocity layers near the acquisition surface, to a 2D land seismic data set acquired in Saudi Arabia. This methodology is based on a recently developed prestack operator, which we call the topographic datuming operator (TDO). The TDO, unlike static corrections, allows for the movement of reflections laterally with respect to their true locations, corresponding to the new datum level. Thus, it mitigates mispositioning of events and velocity bias introduced by the assumption of surface consistency and the time‐invariant time shifts brought about by static corrections. Using the shallow velocities estimated from refracted events, the TDO provides a superior continuity of reflections and better focusing than that obtained from conventional static corrections in most parts of the processed 2D line. The computational cost of applying the TDO is only slightly higher than static corrections. The marginal additional computational cost and the possibility of estimating, after TDO redatuming, stacking velocities that are not affected by a spurious positive bias, as in the case of static corrections, are further advantages of the proposed methodology. The likelihood of strong heterogeneities in the most complex part of the line limits the applicability of any approach based upon geometrical optics; however, the TDO produces results that are slightly better than those obtained from static corrections because of its ability to partially collapse diffractions generated in the near surface. 相似文献
4.
Static shifts from near‐surface inhomogeneities very often represent the key problem in the processing of seismic data from arid regions. In this case study, the deep bottom fill of a wadi strongly degrades the image quality of a 2D seismic data set. The resulting static and dynamic problems are solved by both conventional and common‐reflection‐surface (CRS) processing. A straightforward approach derives conventional refraction statics from picked first breaks and then goes through several iterations of manual velocity picking and residual statics calculation. The surface‐induced static and dynamic inhomogeneities, however, are not completely solved by these conventional methods. In CRS processing, the local adaptation of the CRS stacking parameters results in very detailed dynamic corrections. They resolve the local inhomogeneities that were not detected by manual picking of stacking velocities and largely compensate for the surface‐induced deterioration in the stack. The subsequent CRS residual statics calculations benefit greatly from the large CRS stacking fold which increases the numbers of estimates for single static shifts. This improves the surface‐consistent averaging of static shifts and the convergence of the static solution which removes the remaining static shifts in the 2D seismic data. The large CRS stacking fold also increases the signal‐to‐noise ratio in the final CRS stack. 相似文献
5.
Yonghai Zhang 《Geophysical Prospecting》2010,58(6):915-924
Seismic data acquired along rugged topographic surfaces present well‐known problems in seismic imaging. In conventional seismic data processing, datum statics are approximated by the surface consistence assumption, which states that all seismic rays travel vertically in the top layer. Hence, the datum static for each single trace is constant. In case this assumption does not apply, non‐constant statics are required. The common reflection surface (CRS) stack for rugged surface topography provides the capability to deal with this non‐vertical static issue. It handles the surface elevation as a coordinate component and treats the elevation variation in the sense of directional datuming. In this paper I apply the CRS stack method to a synthetic data set that simulates the acquisition along an irregular surface topography. After the CRS stack, by means of the wavefield attributes, a simple algorithm for redatuming the CRS stack section to an arbitrarily chosen planar surface is performed. The redatumed section simulates a stack section whose acquisition surface is the chosen planar surface. 相似文献
6.
We describe an integrated method for solving the complex near‐surface problem in land seismic imaging. This solution is based on an imaging approach and is obtained without deriving a complex near‐surface velocity model. We start by obtaining from the data the kinematics of the one‐way focusing operators (i.e. time‐reversed Green's functions) that describe propagation between the acquisition surface and a chosen datum reflector using the common‐focus‐point technology. The conventional statics solutions obtained from prior information about the near surface are integrated in the initial estimates of the focusing operators. The focusing operators are updated iteratively until the imaging principle of equal traveltime is fulfilled for each subsurface gridpoint of the datum reflector. Therefore, the seismic data is left intact without any application of time shifts, which makes this method an uncommitted statics solution. The focusing operators can be used directly for wave‐equation redatuming to the respective reflector or for prestack imaging if determined for multiple reflecting boundaries. The underlying velocity model is determined by tomographic inversion of the focusing operators while also integrating any hard prior information (e.g. well information). This velocity model can be used to perform prestack depth imaging or to calculate the depth of the new datum level. We demonstrate this approach on 2D seismic data acquired in Saudi Arabia in an area characterized by rugged topography and complex near‐surface geology. 相似文献
7.
J.F.B. Bolte 《Geophysical Prospecting》2004,52(6):523-534
The common focal point (CFP) method and the common reflection surface (CRS) stack method are compared. The CRS method is a fast, highly automated procedure that provides high S/N ratio simulation of zero‐offset (ZO) images by combining, per image point, the reflection energy of an arc segment that is tangential to the reflector. It uses smooth parametrized two‐way stacking operators, based on a data‐driven triplet of attributes in 2D (eight parameters in 3D). As a spin‐off, the attributes can be used for several applications, such as the determination of the geometrical spreading factor, multiple prediction, and tomographic inversion into a smooth background velocity model. The CFP method aims at decomposing two‐way seismic reflection data into two full‐aperture one‐way propagation operators. By applying an iterative updating procedure in a half‐migrated domain, it provides non‐smooth focusing operators for prestack imaging using only the energy from one focal point at the reflector. The data‐driven operators inhibit all propagation effects of the overburden. The CFP method provides several spin‐offs, amongst which is the CFP matrix related to one focal point, which displays the reflection amplitudes as measured at the surface for each source–receiver pair. The CFP matrix can be used to determine the specular reflection source–receiver pairs and the Fresnel zone at the surface for reflection in one single focal point. Other spin‐offs are the prediction of internal multiples, the determination of reflectivity effects, velocity‐independent redatuming and tomographic inversion to obtain a velocity–depth model. The CFP method is less fast and less automated than the CRS method. From a pointwise comparison of features it is concluded that one method is not a subset of the other, but that both methods can be regarded as being to some extent complementary. 相似文献
8.
由于地面微地震监测台站布设在地表,会受到地表起伏、低降速带厚度和速度变化的影响,降低了微地震事件的识别准确度和定位精度,限制了地面微地震监测技术在复杂地表地区的应用.因此,将三维地震勘探技术的思路引入到地面微地震监测中,提出了三维地震与地面微地震联合校正方法,将油气勘探和开发技术更加紧密地结合在一起.根据三维地震数据和低降速带测量数据,通过约束层析反演方法建立精确的近地表速度模型,将地面微地震台站从起伏地表校正到高速层中的平滑基准面上,有效消除复杂近地表的影响.其次,根据射孔数据和声波测井速度信息,通过非线性反演方法建立最优速度模型,由于已经消除复杂近地表的影响,在进行速度模型优化时不需要考虑近地表的影响,因而建立的速度模型更加准确.最后,在精确速度模型的基础上,通过互相关方法求取剩余静校正量,进一步消除了复杂近地表和速度模型近似误差的影响.三维地震与地面微地震联合校正方法采用逐步校正的思路,能够有效消除复杂近地表的影响,提高微地震数据的品质和速度模型的精确度,保证了微地震事件的定位精度,具有良好的应用前景. 相似文献
9.
10.
11.
浅层地震反射法是一种常用的勘探方法.在浅层地震资料处理中,静校正的精度直接影响速度反演的结果和叠加剖面的质量,在地形平缓时,固定基准面静校正可以满足勘探精度的要求,但在复杂地形条件下,其存在较大误差,即使采用浮动基准面,仍会由于地表一致性假设而残余静校正量,不能消除地形起伏引起的影响,为了提高浅层地震反射静校正的精度必须在常规静校正后进行一次剩余静校正,本文给出起伏地形条件下,滑动基准面(过共中心点的水平面即为该共中心点的滑动基准面)的剩余静校正量,该校正量与炮检距、反射层埋深、地层波速以及炮点和接收点高程有关,适用于单一介质和层状介质情况,本文通过对典型地形起伏的3个水平均匀层状介质理论地质模型的速度谱计算和分析,阐明在复杂地形条件下,应用本文提出的剩余静校正方法可以消除地形起伏的影响,提高静校正精度,在此基础上做动校正可以得到高质量的水平叠加剖面. 相似文献
12.
Static correction is a common step in a seismic data proccessing flowchart for land data. Here we propose a new algorithm for automatic short‐period static correction. The algorithm is based on the assumption that seismic events after short‐period static correction should be locally plane nearly everywhere. No other assumptions are made. Therefore the proposed method does not require a preliminary velocity analysis. The algorithm consists in two main parts: evaluation of second spatial differences of trajectories and subsequent regularized integration of these differences. The proposed method proves its robustness and shows results comparable with conventional residual static correction based on improving common‐midpoint stacking. In contrast to the conventional residual static, the proposed algorithm can estimate short‐period statics in complex cases where common‐midpoint stacking fails because of non‐hyperbolic events. 相似文献
13.
Conventional seismic data processing methods based on post‐stack time migration have been playing an important role in coal exploration for decades. However, post‐stack time migration processing often results in low‐quality images in complex geological environments. In order to obtain high‐quality images, we present a strategy that applies the Kirchhoff prestack time migration (PSTM) method to coal seismic data. In this paper, we describe the implementation of Kirchhoff PSTM to a 3D coal seam. Meanwhile we derive the workflow of 3D Kirchhoff PSTM processing based on coal seismic data. The processing sequence of 3D Kirchhoff PSTM includes two major steps: 1) the estimation of the 3D root‐mean‐square (RMS) velocity field; 2) Kirchhoff prestack time migration processing. During the construction of a 3D velocity model, dip moveout velocity is served as an initial migration velocity field. We combine 3D Kirchhoff PSTM with the continuous adjustment of a 3D RMS velocity field by the criteria of flattened common reflection point gathers. In comparison with post‐stack time migration, the application of 3D Kirchhoff PSTM to coal seismic data produces better images of the coal seam reflections. 相似文献
14.
三维复杂地形近地表速度估算及地震层析静校正 总被引：18，自引：6，他引：18
在地表一致性模型的基础上提出一种可适用于宽线剖面、弯曲测线、传统的二维和目前广泛使用的三维地震观测.在地形及近地表低降速带地质结构复杂的探区，低降速带厚度及速度估算的精度是静校正处理的关键.本研究根据三维地震观测的初至走时数据，利用最小平方与QR分解相结合的算法，在三维空间重建近地表低降速带速度模型，根据重建速度模型实现了静校正长波长分量与短波长分量的同步计算.分析了复杂的近地表低降速带模型初至波的性质，在观测值的自动拾取以及理论值的计算中充分考虑了可能成为初至波的直达波、折射波和反射波的利用，提高了低降速带速度模型反演的精度.在初至走时观测数据的拾取中，本研究采用分形算法克服了初至波波形差异以及折射波相位反转导致的拾取误差，实现了三维初至拾取的大规模全自动化运算.在射线路径与初至波理论走时的计算中，本研究采用一种计算量与模型复杂程度无关的三维射线追踪方法，该方法以最小走时射线路径保证了与观测数据有同等意义的初至波的射线追踪及理论走时的计算.野外实际资料的处理结果表明了方法的有效性. 相似文献
15.
如何正确地消除复杂地表对地震波场的影响，提高地下构造成像的质量一直是中国西部复杂地区地震勘探中存在的难题.本文在三维复杂表层速度模型层析反演\[1\]的基础上，研究了关于复杂地表的静校正问题，提出用三维波动方程在炮集上对地震波场进行正、反向延拓，消除复杂地表对波场的影响，实现三维复杂表层模型校正.理论和实际应用证明，该方法已超越常规静校正的含义，属时变校正方法.用本方法处理复杂地表问题，不但能消除表层对不同深度反射波产生的不同时差影响，提高叠加剖面质量，而且能使校正后的地震波场保持波动特征不发生畸变，可为建立正确的深层速度模型和波动方程叠前深度偏移奠定良好的基础. 相似文献
16.
A workflow for simultaneous joint PP‐PS prestack inversion of data from the Schiehallion field on the United Kingdom Continental Shelf is presented and discussed. The main challenge, describing reasonable PS to PP data registration before any prestack or joint PP‐PS inversion, was overcome thanks to a two‐stage process addressing the signal envelope, then working directly on the seismic data to estimate appropriate time‐variant time‐shift volumes. We evaluated the benefits of including PS along with PP prestack seismic data in a joint inversion process to improve the estimated elastic property quality and also to enable estimation of density compared with other prestack and post‐stack inversion approaches. While the estimated acoustic impedance exhibited a similar quality independent of the inversion used (PP post‐stack, PP prestack or joint PP‐PS prestack inversion) the shear impedance estimation was noticeably improved by the joint PP‐PS prestack inversion when compared to the PP prestack inversion. Finally, the density estimated from joint PP and PS prestack data demonstrated an overall good quality, even where not well‐controlled. The main outcome of this study was that despite several data‐related limitations, inverting jointly correctly processed PP and PS data sets brought extra value for reservoir delineation as opposed to PP‐only or post‐stack inversion. 相似文献
17.
Common reflection surface stack using dip decomposition for rugged surface topography 总被引：1，自引：0，他引：1
We present an extension of the Common Reflection Surface （CRS） stack that provides support for an arbitrary top surface topography. CRS stacking can be applied to the original prestack data without the need for any elevation statics. The CRS-stacked zero- offset section can be corrected （redatumed） to a given planar level by kinematic wave field attributes. The seismic processing results indicate that the CRS stacked section for rugged surface topography is better than the conventional stacked section for S/N ratio and better continuity of reflection events. Considering the multiple paths of zero-offset rays, the method deals with reflection information coming from different dips and performs the stack using the method of dip decomposition, which improves the kinematic and dynamic character of CRS stacked sections. 相似文献
18.
Pre-stack depth migration velocity analysis is one of the key techniques influencing image quality. As for areas with a rugged surface and complex subsurface, conventional prestack depth migration velocity analysis corrects the rugged surface to a known datum or designed surface velocity model on which to perform migration and update the velocity. We propose a rugged surface tomographic velocity inversion method based on angle-domain common image gathers by which the velocity field can be updated directly from the rugged surface without static correction for pre-stack data and improve inversion precision and efficiency. First, we introduce a method to acquire angle-domain common image gathers (ADCIGs) in rugged surface areas and then perform rugged surface tomographic velocity inversion. Tests with model and field data prove the method to be correct and effective. 相似文献
19.
我国北方地区黄土塬覆盖区的静校正问题是地震数据处理中的难点问题之一.黄土塬表层覆盖巨厚黄土,高差起伏较大,地震静校正问题严重;而且黄土塬覆盖区的潜水面普遍较深,常规折射静校正方法无法取得令人满意的处理效果.本文针对黄土塬覆盖区的静校正难题,研究层析反演静校正方法在黄土塬地区的适用性和可靠性.层析反演静校正利用地震波初至走时数据、通过迭代反演的方法构建速度模型,进而依据所得的近地表速度模型对地震数据进行静校正处理.本文的迭代反演采用同步迭代重构算法（SIRT）,并且对同步迭代重构算法进行了改进,使得层析反演的迭代过程趋于稳定.但是,因为黄土塬覆盖区地表高程的横向变化剧烈,相邻检波点的高差及其静校正量有时差异很大,在运用层析静校正求取长波长静校正量的同时,还需采用初至波剩余静校正方法求取短波长静校正量.实例证明,综合应用依据初至波走时数据的层析静校正和剩余静校正方法,同时计算长波长和短波长的静校正量,能够有效地解决黄土塬覆盖区实际地震资料的静校正问题. 相似文献