首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
对东昆仑西段库拉甫河岩组火山岩地球化学进行研究,结果显示,主量元素MgO、FeO含量较高,TiO_2和K_2O含量分别为1.12%、0.63%,与岛弧拉斑玄武岩(0.84%、0.43%)接近;微量元素具有Sr富集,高场强元素Nb、Ta略亏损,P无明显分馏或未分馏的特征,稀土元素球粒陨石标准化配分曲线显示良好的同源性(配分曲线变化规律近似一致),且与富集型洋脊玄武岩配分趋势一致。结合构造环境判别,认为其形成于岛弧环境,具有岛弧拉斑玄武岩的特征,来源于与岛弧相关的富集地幔。利用锆石U-Pb测年获得2组年龄,其中一组年龄为688.7±5.1Ma,代表捕获晶年龄,另一组年龄483.4±3.3Ma为结晶年龄,代表玄武岩的形成年龄,属于早奥陶世。结合其构造环境、岩石地球化学特征和年龄数据,认为其是原特提斯洋俯冲消减环境下的产物,且原特提斯洋俯冲至少持续到早奥陶世。  相似文献   

2.
新疆哈密北山黑山岭一带基性岩SHRIMP测年及地质意义   总被引:1,自引:1,他引:0  
北山黑山岭位于塔里木板块北部北山裂谷带内.该带侵入岩较为发育,主要为华力西构造岩浆带产物.通过对区内基性岩体同位素测定,获得岩体锆石SHRIMP U-Pb年龄为(404±3)Ma,(375±3)Ma和(280±2)Ma.认为基性岩与裂谷玄武岩和洋中脊玄武岩具同源性质,证实其形成于拉张构造环境.提出该带具岩浆熔离型铜镍矿成矿可能.  相似文献   

3.
新疆东昆仑祁漫塔格群火山岩建造成因初析   总被引:6,自引:0,他引:6  
新疆东昆仑祁塔格群中有大规模的玄武岩、安山岩等中,基性火山岩活动的证据,地球化学研究表明,这些火山岩形成于海沟-岛弧环境;玄武岩的稀土元素分布模式总趋势为轻稀土元素略亏损的平坦型,与洋脊玄武岩类型;安山岩轻稀土富集;所有样品均具有轻微的Nb负异常和明显的Ti、P负异常。在各种构造环境判别图解上,样品主要落入洋中脊和岛弧环境。这一发现为证明新疆东昆他古生代岛弧环境提供了重要的证据,为进一步揭示昆仑造  相似文献   

4.
内蒙古满都拉泥盆纪基性火山岩特征及其形成环境   总被引:7,自引:0,他引:7  
满都拉西部出露的蛇绿混杂岩中橄榄辉长岩的单颗粒锆石U-Pb年龄(385.6±1.7)Ma,显示该蛇绿岩形成于早泥盆世晚期。其中的基性火山岩岩块为一套浅变质的枕状玄武岩、橄榄玄武岩,多与超基性岩岩块伴生。玄武岩的SiO2为47.16%~51.93%,TiO2为1.44%~2.13%,Al2O314.08%~17.51%,Na2O3.42%~5.39%,K2O0.22%~0.83%;具低钾特点,显示拉斑玄武岩特征。其富集大离子亲石元素Rb,Ba,Th和U,贫高场强元素Zr,Ti,Y等,似岛弧玄武岩或岛弧-洋中脊过渡型玄武岩或弧后盆地玄武岩。ΣREE为(113.130~189.560)×10—6,LREE/HREE为0.684~1.369,配分曲线呈右缓倾、平坦型,显示岛弧、洋中脊或E-洋中脊玄武岩特征。根据岩石学、岩石地球化学特征,结合区域构造背景,认为该套火山岩或该蛇绿岩的形成环境为弧后盆地。  相似文献   

5.
东沟蛇绿岩位于北祁连造山带中东段的扎麻什一带,主要由辉橄岩、辉长岩和基性火山岩组成较为完整的蛇绿岩单元。对基性火山岩进行单颗粒锆石LA-ICP-MS U-Pb同位素测定,获得499.3Ma±6.2Ma年龄加权平均值,代表蛇绿岩的形成年龄,相当于晚寒武世。岩石地球化学研究表明,该蛇绿岩中的基性火山岩属于拉斑玄武岩系列,球粒陨石标准化稀土元素分配模式为近平坦型,(La/Yb)N在0.97~1.26之间;微量元素分配模式除个别大离子亲石元素(Ba、Rb、U、K)外基本为平坦型曲线,Nb、Ta、Zr、Hf无亏损,显示出洋中脊玄武岩(N-MORB)的地球化学特征;在Zr-Zr/Y和Ti/100-Zr-3Y等构造环境判别图中,所有样品数据点均落入MORB区域内,表明其形成于洋中脊环境。经区域对比,该蛇绿岩与玉石沟、川刺沟蛇绿岩等一起构成了大洋扩张脊型蛇绿岩带。  相似文献   

6.
对金沙江缝合带西段青海治多地区的多彩蛇绿混杂岩和当江荣中酸性岛弧火山岩进行了研究,野外地质剖面显示,蛇绿岩主要由辉长岩、堆晶辉长岩和玄武岩组成,缺少地幔橄榄岩单元。通过对蛇绿岩内部细粒辉长岩、基性熔岩的地球化学测试及堆晶辉长岩的LA-ICP-MS锆石U-Pb测年发现,基性熔岩可分为2种类型,即洋岛玄武岩OIB型和MORB-IAT型。前者并非蛇绿岩组分,为构造就位时带入;后者为过渡类型,具有典型洋中脊—岛弧蛇绿岩地球化学特征。辉长岩具有明显的TNT槽等岛弧信号,与类型二均属于蛇绿岩成分。测得的堆晶辉长岩中锆石U-Pb年龄为252.50Ma±0.58Ma(MSWD=0.95),是蛇绿岩的形成年龄。研究认为,多彩蛇绿岩与当江荣火山岩具有成对性关系,结合造山带沟—弧—盆体系构造格局,认为前者形成于岛弧偏海沟的弧前构造背景,是晚二叠世金沙江洋持续俯冲的产物。  相似文献   

7.
李永飞  王娟 《西北地质》2005,38(1):15-25
利用岩石地球化学的方法,研究了羌塘地块南界班公湖-丁青断裂带中晚中生代火山岩。结果表明,研究区火山岩由拉斑系列大洋玄武岩(MORB)和钙碱性系列岛弧玄武岩(IAB)、玄武安山岩、安山岩、英安岩和流纹岩组成。拉斑系列的洋中脊玄武岩微量元素原始地幔的标准化配分型式,明显不同于N—MORB玄武岩,而具有岛弧型的MORB特征(Ta、Nb的相对亏损),说明其成因与岛弧环境有一定联系。本区钙碱性系列的岛弧玄武岩(IAB)、安山岩、英安岩和流纹岩在Hacker图解中,微量、稀土元素标准化配分型式上显示出岩浆同源性的特征。通过对研究区内分布的大洋玄武岩、岛弧玄武岩厘定,推断班公湖-丁青缝合带在晚中生代期间可能发育过一个完整的有限洋盆,这将对于进一步研究羌塘地块与其周边各地体的大陆动力学作用过程具有重要意义。  相似文献   

8.
冰沟蛇绿混杂岩是阿尔金山红柳沟蛇绿混杂岩带的东段部分,岩石组合包括蛇纹岩、方辉橄榄岩、辉石岩和辉长岩等。蛇纹岩具高Mg,Mg/Fe值大于9,低Al、Ca、Na、K为特征,从稀土元素和微量元素特征来看,基性辉长岩和洋壳以及洋中脊玄武岩极为相似,而超基性岩与原始地幔较为接近。辉长岩获得锆石SHRIMP年龄为449.5±10.9Ma。蛇绿混杂岩的围岩为一套巨厚的碎屑岩、火山碎屑岩、火山岩,以及部分碳酸盐岩构成,其中含有具有洋中脊特征的枕状构造玄武岩,以及放射虫硅质岩,放射虫时代为奥陶纪中晚期,与辉长岩的SHRIMP年龄一致。这些证据进一步证实了红柳沟一带存在早古生代洋盆的地质事实。  相似文献   

9.
对东昆仑其木来克一带的花岗质岩体进行锆石U-Pb测年,获得花岗闪长岩年龄为274.6±1.2Ma,黑云母花岗岩闪长岩年龄271.2±0.6Ma,认为其形成于晚二叠世。该岩体的地球化学特征显示,其具有钙碱性、弱过铝质(A/CNK=0.99~1.1)特征;稀土元素球粒陨石标准化分布图表现为左陡右缓,具弱的负Eu异常;微量元素特征显示高场强元素Nb、Ta、Ti、P等亏损,结合构造环境认为其形成于岛弧环境,属于I型花岗岩。结合区域构造演化,认为古特提斯洋于晚二叠世开始向塔里木板块俯冲,与此同时洋中脊还在持续扩张,表明此时的特提斯洋已处于消亡期。  相似文献   

10.
闽西北建瓯马面山俯冲增生杂岩由岩块和基质组成,其中变基性岩岩块有2类不同构造产状的斜长角闪岩:第一类与透辉石岩或大理岩呈似互层状产出;第二类单独呈构造岩块、团块状产于基质中,原岩均为玄武岩类,为幔源岩浆部分熔融的产物。通过元素地球化学特征分析,前者斜长角闪岩原岩为形成于类似洋岛-海山环境的碱性玄武岩;后者斜长角闪岩的原岩分别为岛弧钙碱性玄武岩和洋壳内部初始俯冲背景下前弧环境的MORB-like(类洋中脊)型岛弧拉斑玄武岩。通过锆石测年,前者斜长角闪岩的2组变质年龄为(399±3.5) Ma(MSWD=0.45)、(388±1.8) Ma(MSWD=1.19);后者斜长角闪岩的原岩结晶年龄为(441.8±4.7)Ma(MSWD=0.32),变质年龄为(411±19)Ma(MSWD=0.095)。通过对马面山俯冲增生杂岩带内发育的在空间上共生的斜长角闪岩类研究,其原岩形成于洋岛、前弧和岛弧等环境,结合锆石年龄和前人研究成果,认为华夏地块内部闽西北、浙西南一带发育早古生代末-晚古生代初的洋壳俯冲-弧陆碰撞(增生)造山作用。  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

13.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

14.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

16.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

17.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

18.
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.  相似文献   

19.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.  相似文献   

20.
岩石密度和超高压岩石折返速率   总被引:1,自引:3,他引:1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号