首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The photocatalytic decolorization and mineralization of Reactive Black 5 (RB5) dye in presence of TiO2 Degussa P25 has been studied using artificial light radiation in a shallow pond slurry reactor. The equilibrium adsorption of dye, influence of pH (3–11), catalyst load (0.5–3.0 g/L), and dye concentration (20–100 mg/L) on decolorization kinetics were studied. The effect of area to volume ratio of photoreactor on decolorization kinetics has been also studied. Mineralization studies were performed at optimized conditions of pH (3) and catalyst load (1.5 g/L). The maximum adsorption (26.5 mg/g) of dye was found to occur at pH 3. The apparent pseudo first order decolorization rate constant (kapp) value followed the order pH 3 > pH 11 > pH 9 > pH 7. As compared to available literature reduction in total organic carbon (TOC) was minimal by the time there was complete decolorization. Initial reduction in TOC was followed by subsequent increasing trend till complete decolorization. Final decreasing trend in TOC was observed only after complete decolorization. Twelve hours of treatment under experimental conditions reduced TOC content by 70% only. Discussion of results suggest that photocatalytic treatment of colored effluent under low UV intensity, and low A/V ratio may result in completely decolorized effluent but still having high COD.  相似文献   

2.
In this study, the decolorization, dearomatization, and mineralization efficiencies of different advanced oxidation processes (AOPs; namely O3, O3/Fe(II), O3/Fe(II)/UVA, and O3/TiO2/UVA) were investigated for the azo dye C.I. Reactive Red 194 (RR194). The effects of pH (3–11), amount of TiO2 (0.05–1 g/L), and concentration of Fe(II) (0.1–1.6 mM) were investigated for the applied methods. The decolorization and mineralization efficiencies of the photocatalytic ozonation system (O3/TiO2/UVA) were increased by decreasing the pH of the dye solution in contrast to the ozonation system (O3). Decolorization of RR194 was increased in the photocatalytic ozonation system with an increasing amount of catalyst however, a decreasing was occurred for the homogeneous catalytic system (O3/Fe(II)) when increasing the concentration of catalyst. The decolorization efficiency of the homogeneous catalytic system (O3/Fe(II)) was enhanced when combined with UVA light. In our study, the most efficient method for dearomatization and mineralization was the O3/TiO2/UVA among the applied AOPs.  相似文献   

3.
This paper discusses the possibility of immobilization of TiO2 nanoparticles onto recycled wool‐based nonwoven material, which can be utilized for removal of dyes from wastewater. The photocatalytic activity of TiO2 nanoparticles deposited on the nonwoven material was evaluated in the aqueous solution of direct dye C.I. Direct Blue 78 under the UV illumination. Nonwoven material modified with TiO2 nanoparticles provides complete removal of dye from the solution already after 4–6 h of UV illumination. However, photodegradation of the dye adsorbed on the nonwoven material was obtained within 24 h of UV illumination. The rate of dye adsorption and photodegradation depends on the amount of deposited TiO2 nanoparticles. The increase of initial dye concentration induced decrease in photocatalytic efficiency of immobilized TiO2 nanoparticles. The highest photodegradation rate was achieved in acidic conditions. Elevated temperatures positively affected the removal of dye from solution. Photocatalytic activity of TiO2 nanoparticles deposited on nonwoven material was preserved after three photodegradation cycles.  相似文献   

4.
Kaolin, cordierite, and calcite are investigated as supports for TiO2. The prepared TiO2/support samples are examined for the removal of organic dyes from wastewater. The samples are preliminarily investigated to identify the optimal loaded system using synthetic wastewater containing methylene blue (MB). Data indicate that the investigated support significantly affects the photocatalytic activity of the supported TiO2. Low photocatalytic activity toward MB degradation is observed upon using TiO2/calcite when compared to the unsupported TiO2. Interaction between calcite and titania species probably occurrs to produce the less photoactive CaTiO3 amorphous species. Anatase TiO2 is obtained upon using kaolin and cordierite as supports. The low photocatalytic performance of the TiO2/kaolin sample is also observed. A high concentration of MB on TiO2/kaolin surfaces blocks the photoactive sites. TiO2/cordierite shows the highest photocatalytic activity compared to the unsupported TiO2 as well as the other TiO2/support samples. Rigid cordierite particles suppress the agglomeration of TiO2 particles during the preparation, leading to a high exposed surface of TiO2 towards light illumination. TiO2/cordierite is investigated for the removal of organic dye from real wastewater collected from a textile dyeing factory. Color removal of up to 46% is achieved upon UV irradiation.  相似文献   

5.
Laccase from the white‐rot fungus Pleurotus florida, produced under solid‐state fermentation conditions, was used for the decolorization of reactive dye Remazol Brilliant Blue R (RBBR). RBBR was decolorized up to 46% by P. florida laccase alone in 10 min. In the presence of N‐hydroxybenzotriazole (HBT), the rate of decolorization was enhanced 1.56‐fold. Central composite design of response surface methodology with four variables namely, dye, enzyme, redox mediator concentrations, and time at five levels was applied to optimize the RBBR decolorization. The predicted optimum level of variables for maximum RBBR decolorization (87%) was found to be 52.90 mg L?1 (RBBR), 1.87 U mL?1 (laccase), 0.85 mM (HBT), and 7.17 min (time), respectively. The validation results showed that the experimental value of RBBR decolorization (82%) was close to the predicted one. The disappearance of C–N and C–X groups, and a small shift in N–H groups in Fourier‐transform infra red (FTIR) spectroscopy confirms the degradation of RBBR chromophore by laccase enzyme. The phytotoxicity of RBBR was considerably reduced after the treatment with laccase. RBBR decolorization kinetics; Km and Vmax were calculated to be 145.82 mg L?1 and 24.86 mg L?1 min, respectively.  相似文献   

6.
This study illustrates the degradation of an azo dye, Reactive Yellow 81 (RY81), by the combined irradiation of UV‐C and ultrasound in the presence of homogeneous (Fe2+) and heterogeneous (TiO2, ZnO) catalysts. The efficiency of homogeneous and heterogeneous oxidation systems was evaluated in regard of the decolorization and mineralization of RY81. Decolorization followed pseudo‐first‐order kinetics with homogeneous and heterogeneous catalysts. Complete color removal was accomplished by homogeneous sonocatalytic and sonophotocatalytic oxidation processes with apparent rate constants of 0.96 × 10?3 and 46.77 × 10?3 s?1, respectively, in the presence of Fe2+. However, partial color removal was obtained by heterogeneous sonocatalytic, photocatalytic, and sonophotocatalytic oxidation processes with apparent rate constants of 2.32 × 10?3, 3.60 × 10?3, and 3.67 × 10?3 s?1, respectively, in the presence of ZnO. TiO2 had the worst catalytic effect of all of the oxidation processes. The addition of hydrogen peroxide increased the rate constants of the heterogeneous oxidation processes and decreased the rate constants of the homogeneous oxidation processes. RY81 mineralization was 62.8% for the US/UV/Fe2+ homogeneous oxidation process, which was the best oxidation process, whereas it was 43.5% for the US/UV/ZnO/H2O2 heterogeneous oxidation process within 2 h reaction time.  相似文献   

7.
In this study, the oxidative decolorization of C.I. reactive yellow 145 (RY 145) from synthetic textile wastewater including RY 145 and polyvinyl alcohol by Fenton and sono‐Fenton processes which are the combination of Fenton process with ultrasound has been carried out. The effects of some operating parameters which are the initial pH of the solution, the initial concentration of Fe2+, H2O2, and the dye, temperature, and agitation speed on the color and chemical oxygen demand (COD) removals have been investigated. The optimum conditions have been found as [Fe2+] = 20 mg/L, [H2O2] = 20 mg/L, pH 3 for Fenton process and [Fe2+] = 20 mg/L, [H2O2] = 15 mg/L, pH 3 for sono‐Fenton process by indirectly sonication at 35 kHz ultrasonic frequency and 80 W ultrasonic power. The color and COD removal efficiencies have been obtained as 91 and 47% by Fenton process, and 95 and 51% by sono‐Fenton processes, respectively. Kinetic studies have been performed for the decolorization of RY 145 under optimum conditions at room temperature. It has been determined that the decolorization has occurred rapidly by sono‐Fenton process, compared to Fenton process.  相似文献   

8.
Wastewater production in a hospital laundry and the treatment of the most critical wastewater stream, are assessed. Hospital laundry wastewaters are hazardous to the environment due to their high pollutant concentrations and the chemicals added during the clothes washing process. Heterogeneous photocatalysis with UV, O3 and TiO2 and their possible combinations were used for disinfection purposes. A ramp‐type reactor was used for TiO2 (P25 Degussa) fixation and for photochemical diffusion of the ozonized air. After assessing 5‐day biological oxygen demand, chemical oxygen demand, pH, turbidity, and surfactant content, and checking for the presence of thermotolerant coliforms and Escherichia coli, it was concluded that UV/O3/TiO2 was the best process/combination, yielding a 100% disinfection rate and a microbiological inactivation of 0.5070 min–1 for E. coli and of 0.5505 min–1 for thermotolerant coliforms.  相似文献   

9.
This experimental research deals with using steel scrap as a heterogeneous catalyst. This catalyzes the oxidation reaction of real textile dye wastewater based on a modified solar photo‐Fenton oxidation process. Morphologic analysis and mapping of the elementary composition of the steel scrap have been carried out by scanning electron microscopy. The effects of concentration of H2O2, the pH of the solution and the catalyst loading on the degradation of textile dye wastewater are elucidated. Kinetic studies have been performed for the decolorization of wastewater under optimum conditions. It could be concluded that the steel scrap is a potential substitute for ferrous salts as a catalyst for the solar photo‐Fenton reaction.  相似文献   

10.
The oxidation of organophosphorus pesticides (OPPs), such as malathion and parathion, in aqueous solution was studied using conventional ozonation (O3), photolytic ozonation (O3/UV, O3/UV/H2O2), and heterogeneous catalytic ozonation (O3/TiO2/UV) processes. Experiments were performed in batch mode at laboratory scale and processes were compared in terms of disappearance kinetics. The best results of pesticide mineralization were obtained when TiO2 particles in combination with ozone (O3) and UV photolysis (λ = 254 nm) were applied. Decomposition of 99% of parent compounds were achieved in 10 min and oxon derivatives were completely removed in 30 min. The initial reaction rate increases linearly with increasing catalyst amount. Toxicity measurements of the treated solutions were carried out in order to evaluate the efficiency of the treatment methods. No detoxification was achieved for O3 and O3/UV applications. Heterogeneous photocatalytic ozonation was shown to be feasible for achieving complete decomposition of OPPs and their oxon intermediates.  相似文献   

11.
The photocatalytic activity of combustion synthesized nanocrystalline CeAlO3 was determined for the degradation of four anionic and four cationic dyes. The perovskite oxide showed high‐photocatalytic activity and a complete degradation of all the dyes was possible within 2 h. The photocatalytic activity of the compound was comparable with the activity of the commercial Degussa P‐25 TiO2 catalyst. The degradation of dyes was found to follow first order kinetics and the first order degradation rate constants were determined.  相似文献   

12.
Two main routes of methods for the preparation of photocatalytic active titanium dioxide films on glass substrates were investigated: (1) the use of titanium dioxide powder and (2) the in situ generation of the catalyst via hydrolysis of titanium tetraisopropoxide (TTIP) or TiCl4. The activities of the catalyst films were evaluated by measuring the degradation of dichloroacetic acid (DCA), clofibric acid, and terbuthylazine used as model organic compounds. The concentration decrease of DCA and the concentration increase of chloride ions as the decomposition product allowed to distinguish between photocatalytic degradation of DCA and adsorption onto the TiO2 films. Furthermore, TiO2 films of the commercially available materials P25 (Degussa) and Hombikat UV100 (Sachtleben Chemie) were used to investigate whether there was a difference in the degradation pathways of terbuthylazine as a model compound. For the experiments mini flow‐through reactors were constructed. The investigated immobilization techniques were easy to handle without need of any expensive equipment. All TiO2 coatings showed good photocatalytic activities and mechanical stabilities with efficient long‐term stabilities. The best immobilization reproducibility was achieved by the spray coating technique and by the in situ method with the dipping sol‐gel process starting by TTIP. During the continuous use of the TiO2 films no TiO2 particles were found in the irradiated solutions.  相似文献   

13.
Feasibility of photocatalytic dechlorination of PCB‐138 and Aroclor‐1254 using platinum loaded TiO2 (P25) in an alkaline 2‐propanol medium has been investigated. Experiments were conducted in batch mode using a Rayonet photo‐reactor under aerated and deaerated conditions with black lamps emitting around 350 nm as light source. Two forms of platinum deposition were investigated: Photochemically loaded P25 as well as addition of potassium hexachloroplatinate into the reaction medium. Partial dechlorination of PCBs was observed after 7 h of irradiation with pure TiO2 as catalyst when the reaction vessel was kept open to air. Complete dechlorination was observed after 5 h of irradiation in a deaerated environment. Enhanced photocatalytic efficiency was observed when platinum deposited P25 was used as catalyst, with the best result being obtained when aqueous potassium hexachloroplatinate was added into the reaction medium. Lower potassium hexachloroplatinate concentration (0.1 mM) yielded better performance.  相似文献   

14.
Acid violet 19 (AV) belongs to the triphenylmethane (TPM) class of dyes which are potentially mutagenic or carcinogenic. However, very little studies on biodegradation of AV were reported as compared to other TPM dyes such as malachite green and crystal violet. In this study, AV was decolorized up to 98% within 30 min by Pseudomonas aeruginosa BCH. The decolorization depends on the initial dye concentration, pH, and temperature. However, the dye was decolorized under wide pH and temperature ranges with an optimum of pH 7 and 30°C. Up to 250 mg L?1 of dye was found to be tolerated and decolorized by this strain. It showed decolorization ability for seven repeated dye addition cycles. The effect of additional carbon sources on dye decolorization was studied in which mannitol containing medium showed decolorization in 15 min. Induction in the enzyme activities of laccase, NADH‐DCIP reductase, and veratryl alcohol oxidase (VAO) indicates their involvement in AV degradation. Various analytical studies viz. UV–VIS, HPTLC, HPLC, and FTIR confirmed the biodegradation of AV by the bacterium. Based on GC‐MS analysis, a possible degradation pathway for AV was proposed. The phytotoxicity studies using Phaseolus mungo and Sorghum vulgare revealed the less toxic nature of metabolites formed after AV degradation.  相似文献   

15.
Response surface methodology (RSM) and artificial neural networks (ANNs) based on a multivariate central composite design (CCD) were applied to model and optimize the photocatalytic degradation of N,N‐diethyl‐m‐toluamide (DEET). The individual and interaction effects of three main operating factors (mass of TiO2, initial DEET concentration, and irradiation intensity) on process efficiency were estimated, proving their important effect on % DEET removal. Among the independent variables, TiO2 concentration displayed the highest effect on DEET degradation followed by initial DEET concentration and UV intensity. The optimization and prediction capabilities of ANNs and RSM were compared on the basis of root mean squared error, mean absolute error, absolute average deviation, and correlation coefficient values. Results proved the usefulness and capability of the experimental design strategy for successful investigation and modeling of the photocatalytic process. Moreover, the selected ANN gave better estimation capabilities throughout the range of variables than RSM. Based on the models and the related experimental conditions, the optimal values of each parameter were determined. Under optimum conditions, DEET and total organic carbon (TOC) followed pseudo‐first order kinetics. Nearly complete degradation of DEET took place within 15 min whereas high TOC removal percentages (>85%) was achieved after 90 min irradiation time.  相似文献   

16.
In the present study, effects of operational parameters on the electrical energy consumption for photooxidative process (UV/H2O2) for the decolorization of C. I. Acid Red 88 (AR88) have been investigated. In a series of experiments, 20 mg L?1 of AR88 solution were irradiated in the presence of different concentrations of H2O2 (to find out optimum amount of H2O2) by UV light intensity of 30 W m?2 for certain irradiation times. The decolorization of the dye followed pseudo first‐order kinetics, and hence, the figure‐of‐merit electrical energy per order (EEO) is appropriate for estimating the electrical energy efficiency. The electrical energy consumption was determined during the variation of some parameters such as initial H2O2 concentration, initial dye concentration, UV light intensity, pH, and the gap size of solution. Results showed that electrical energy could be reduced by optimizing operational parameters.  相似文献   

17.
This study is focused on a plagioclase‐bearing spinel lherzolite from Chah Loqeh area in the Neo‐Tethyan Ashin ophiolite. It is exposed along the west of left‐lateral strike‐slip Dorouneh Fault in the northwest of Central‐East Iranian Microcontinent. Mineral chemistry (Mg#olivine < ~ 90, Cr#clinopyroxene < ~ 0.2, Cr#spinel < ~ 0.5, Al2O3orthopyroxene > ~ 2.5 wt%, Al2O3clinopyroxene > ~ 4.5 wt%, Al2O3spinel > ~ 41.5 wt%, Na2Oclinopyroxene > ~ 0.11 wt%, and TiO2clinopyroxene > ~ 0.04 wt%) confirms Ashin lherzolite was originally a mid‐oceanic ridge peridotite with low degrees of partial melting at spinel‐peridotite facies in a lithospheric mantle level. However, some Ashin lherzolites record mantle upwelling and tectonic exhumation at plagioclase‐peridotite facies during oceanic extension and diapiric motion of mantle along Nain‐Baft suture zone. This mantle upwelling is evidenced by some modifications in the modal composition (i.e. subsolidus recrystallization of plagioclase and olivine between pyroxene and spinel) and mineral chemistry (e.g. increase in TiO2 and Na2O of clinopyroxene, and TiO2 and Cr# of spinel and decrease in Mg# of olivine), as a consequence of decompression during a progressive upwelling of mantle. Previous geochronological and geochemical data and increasing the depth of subsolidus plagioclase formation at plagioclase‐peridotite facies from Nain ophiolite (~ 16 km) to Ashin ophiolite (~ 35 km) suggest a south to north closure for the Nain‐Baft oceanic crust in the northwest of Central‐East Iranian Microcontinent.  相似文献   

18.
Response surface methodology (RSM) was employed to investigate the effects of different operational parameters on the biological decolorization of a dye solution containing malachite green (MG) in the presence of macroalgae Chara sp. The investigated variables were the initial pH, initial dye concentration, algae amount, and reaction time. Central composite design (CCD) was used for the optimization of biological decolorization process. Predicted values were found to be in good agreement with experimental values (R2 = 0.982 and Adj‐R2 = 0.966), which indicated suitability of the employed model and the success of RSM. The results of optimization predicted by the model showed that maximum decolorization efficiency was achieved at the optimum condition of the initial pH 6.8, initial dye concentration 9.7 mg/L, algae amount 3.9 g, and reaction time 75 min. UV–VIS spectra and FT‐IR analysis showed degradation of MG.  相似文献   

19.
Ag‐modified TiO2 nanotube arrays (Ag/TiO2 NAs) were prepared and employed as a photocatalyst for degradation of 17α‐ethinylestradiol (EE2) and inactivation of Escherichia coli. The as‐synthesized Ag/TiO2 NAs were characterized by field‐emission scanning electron microscope (FESEM), X‐ray diffraction (XRD), and X‐ray photoelectron spectroscopy (XPS). It was found that metallic Ag nanoparticles were firmly deposited on the TiO2 NAs with the pore diameter of 100 nm and the length of 550 nm. Photocatalytic degradation of EE2 and inactivation of E. coli were enhanced effectively in an analogical trend using Ag/TiO2 NAs. In particular, Ag/TiO2 NAs exhibited the antimicrobial activity even in the absence of light. The Ag acted as a disinfection agent as well as the dopant of the modified TiO2 NAs photocatalysis by forming a Schottky barrier on the surface of TiO2 NAs. Inorganic ions suppressed the rates of photocatalytic degradation of EE2, with HCO having a more pronounced effect than NO or SO. Humic acid (HA) was found to increase the rate of EE2 degradation.  相似文献   

20.
The relative ability of Coriolus versicolor to grow on coir fiber as a ligninocellulosic material was examined. Addition of yeast extract to the culture increased laccase activity, which was further enhanced to the level of 1976 U/L by addition of 1 mM copper sulfate. Laccase thus produced was used without further purification for the decolorization of various dye solutions. Decolorization efficiency was compared with the conventional environment friendly oxidation technique using hydrogen peroxide in the presence of UV radiations. Laccase showed good decolorization in most of the cases. Excellent results were achieved when the dye solution was treated successively with laccase and UV/H2O2 wherein more than 80% decolorization was achieved. This value is remarkably higher than that attained either by the enzyme or UV/H2O2 photolysis alone.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号