首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 296 毫秒
1.
矿物聚合材料:研究现状与发展前景   总被引:53,自引:1,他引:53  
矿物聚合材料是以铝硅酸盐矿物或工业固体废物为主要原料 ,以高岭石作配料 ,硅酸钠作结构模板剂 ,氢氧化钠作激活剂而制成的一类新型无机非金属材料。其形成过程为 :铝硅酸盐固体组分的溶解络合、分散迁移、浓缩聚合和脱水硬化。由铝硅酸盐凝胶相形成的基体相 ,其化学组成与沸石相近 ,微结构极可能与蛋白石类似 ,物理形态上呈三维网络结构 ,将未溶解的固体颗粒胶结为坚硬块体 ,是材料获得良好力学性能和化学稳定性的结构基础。矿物聚合材料的性能主要受配料组成和聚合反应的动力学过程所控制 ,其抗压强度随固化时间的延长而呈抛物线式发展。系统研究配料组成和固化条件对铝硅酸盐聚合反应的影响 ,建立表征矿物聚合材料组成结构性能的物理模型 ,是对其进行结构性能设计的理论基础 ,也是利用铝硅酸盐聚合反应实现工业固体废物资源化的技术关键。  相似文献   

2.
利用提钾废渣和粉煤灰制备矿物聚合材料的实验研究   总被引:19,自引:4,他引:19       下载免费PDF全文
利用富钾岩石提钾后的废渣代替硅酸钠 (钾 )、大部分高岭石和氢氧化钠 (钾 ) ,以粉煤灰为主要原料 ,制备出矿物聚合材料 ,并采用正交实验确定其优化工艺条件为 :煅烧高岭石用量为 10 %~ 15 % ,废渣用量约 35 % ,氢氧化钠用量为 5 %~ 6 %。代表性样品的 7d抗压强度可达到 4 0~ 5 0MPa ,耐酸性、耐碱性分别为 99.99%和 10 0 % ,密度1.77~ 1.88g/cm3 ,收缩率 0 .13%~ 0 .2 8% ,导热系数 0 .4 8~ 0 .5 1W/m·K ,平均硬度 3.4 3。X射线粉末衍射分析表明 ,由铝硅酸盐聚合反应形成的基体相呈非晶态。扫描电镜分析絮凝状的基体相与粉煤灰玻璃体结合紧密 ,从而为制品具备良好的力学性能提供了结构基础。该矿物聚合材料成本低廉 ,同时又能利用粉煤灰等工业固体废物而达到改善环境的目的  相似文献   

3.
利用粉煤灰制备高强矿物聚合材料的实验研究   总被引:14,自引:2,他引:12  
以粉煤灰和内蒙古白云鄂博的富钾板岩提钾后的硅铝质滤渣为粉体原料,标准砂为骨料,采用振动成型方法,在90 ℃下养护24 h,制备了矿物聚合材料。实验结果显示:制品的7 d饱水抗压强度达78.5 MPa,28 d饱水抗压强度可达89.0 MPa;制品的含水率和吸水率分别为5.3%和15.0%;在20 ℃下,制品在浓度为1.0 mol/L的硫酸溶液中浸泡24 h,其质量损失率为2.1%。以制品的抗压强度为指标,研究了主要因素(提钾滤渣比例、固液质量比、硅酸钠含量和标准砂含量)对制品性能的影响。结果表明:干燥的提钾滤渣在粉体物料中的比例对制品的力学性能影响最大;硅酸钠水玻璃在液相中的比例约为70%,且标准砂占固相的比例为70%左右时,可制得力学性能良好的矿物聚合材料。矿物聚合材料的固结过程为:硅铝质原料在碱硅酸盐溶液中先分解为铝硅酸盐低聚体,低聚体再通过脱羟基聚合反应生成铝硅酸盐胶体相,进一步形成由[SiO4]4- 和[AlO4]5-四面体相互连接的具有三维网络结构的矿物聚合材料基体相,从而赋予制品良好的力学性能。  相似文献   

4.
矿物聚合材料基体相的形成过程研究   总被引:6,自引:0,他引:6       下载免费PDF全文
基体相在矿物聚合材料结构中起与其他矿物表面键合的作用 ,是材料强度的来源。本实验以富钾岩石提钾后的硅铝质溶胶相加NaOH固体 ,在 6 0℃下制备矿物聚合材料基体相 ,并采用XRD、SEM、IR、NMR等分析手段研究了不同固化时间基体相的结构。研究结果表明 ,在基体相的形成过程中 ,没有新的结晶相产生 ,说明基体相为一种半晶质到非晶质物相 ;随着固化时间的变化 ,其自身 [SiO4]4-四面体发生解聚又重新聚合 ,聚合后基体相形成了致密完整的块体  相似文献   

5.
矿物聚合材料固化过程中的聚合反应机理研究   总被引:15,自引:2,他引:13  
以粉煤灰、高岭石等为原料,制备出具有良好力学性能和耐酸性的矿物聚合材料制品,可代替部分硅酸盐水泥制品。根据矿物聚合材料制品在3 d、7 d、14 d、28 d的X射线衍射(XRD)、红外光谱(IR)、扫描电镜(SEM)、核磁共振(NMR)等测试分析结果,研究了该材料固化过程中的聚合反应机理。研究结果表明,矿物聚合材料在固化过程中的反应如下:(1)粉煤灰中的玻璃相在强碱的作用下首先发生溶解,其中部分Si-O、Al-O键发生断裂;(2)断裂之后的Si、Al组分在碱金属离子Na+、OH- 等作用下形成Si、Al低聚体(-Si-O-Na、-Si-O-Ca-OH、Al(OH)-4、Al(OH)2-5、Al(OH)3-6),而后随着溶液组成和各种离子浓度的变化,这些低聚体形成凝胶状的类沸石前驱体;(3)前驱体脱水形成非晶相物质。核磁共振分析结果表明,28 d制品中,Si的存在方式以Q4为主。研究结果为进一步揭示矿物聚合材料的形成机理、改善制品的性能奠定了良好的基础。  相似文献   

6.
利用金矿尾砂制备矿物聚合材料的实验研究   总被引:9,自引:3,他引:9  
利用北京平谷金矿尾砂、变高岭石、NaOH、KOH和水玻璃制备了矿物聚合材料 ,正交实验结果表明 35℃时的优化条件为尾砂含量 80 %~ 82 5 %、固 /液比 4 3~ 4 7、水 /碱比为4~ 5 (均为质量比 ) ,升高温度、延长固化时间及室温放置时间均会使矿物聚合材料的抗压强度显著提高。将金矿尾砂制备成矿物聚合材料 ,可使部分CN-转化成无害的CO2 -3 和H2 ,其他则以夹持 (物理 )方式固定下来 ;当存在Fe2 +或Fe3+离子时 ,CN-以氰化铁的化学方式固定下来。该矿物聚合材料在 1mol/L的HCl溶液中浸泡 30d ,质量损失 5 6 % ,结构完好 ,表现出良好的抗酸性。在 6 0℃下固化 2 4h ,室温放置 6d后抗压强度为 2 2MPa ;在 6 0℃下固化72h ,抗压强度为 36 6MPa。该研究为金矿尾砂的利用提供了一条新途径。  相似文献   

7.
高炉渣基矿物聚合材料的制备及其对铅离子的固定   总被引:1,自引:0,他引:1  
以高炉渣和煅烧高岭土为粉体原料,KOH溶液为激活剂,采用振动成型方法,在20℃下养护24 h,制备矿物聚合材料。实验样品静置固化28 d,采用压力试验机可测得其抗压强度高达24~65 MPa。矿物聚合材料制品在1 d、3 d、7 d、28 d的X射线衍射(XRD)、红外光谱(IR)等测试分析表明,高炉渣中的玻璃相在强碱的作用下发生溶解,之后形成Si、Al低聚体,最后形成各种晶体。采用矿物聚合材料可以有效地固定Pb2+。用含Pb2+的溶液配制矿物聚合材料,静置固化28 d,测其抗压强度以及Pb2+溶出率。实验结果表明,Pb2+的存在降低了矿物聚合材料的1 d的抗压强度,但对7 d及28 d抗压强度没有影响,聚合材料对Pb2+固定率达到99.9%。  相似文献   

8.
廖晓兰  杨久俊  张磊  张宝莲  梁超 《岩土力学》2015,36(8):2216-2222
滨海盐渍土中易溶盐遇水溶解,引起强度明显下降,变形增大,严重影响其作为生土材料的工程性能。利用丙烯酰胺(AM)原位聚合对盐渍土进行改良,探讨固化条件对其力学性能与耐水性能的影响。试验结果表明,当加热温度为70 ℃、加热时间为6 h,AM单体用量为盐渍土用量的3%,引发剂用量为AM用量的3%,且不加入交联剂时,用量较为经济且具有较高的抗压和抗折强度,在龄期为7、14、28 d时,其抗折强度分别可达到2.265、3.603、5.255 MPa;抗压强度分别达到5.6、13.7、16.2 MPa;与28 d龄期的原试样进行对比,AM聚合固化后试样的抗折强度和抗压强度分别提高了4~5倍,相比传统砌体砂浆材料强度大幅提高,加固后试样的耐水性能和收缩率也都得到明显的改善。利用电镜扫描(SEM)、X射线衍射光谱(XRD)对其微观机制变化进行了初步探讨,发现改良后土样孔隙含量大大减小,且其矿物结构并未发生变化,可视为一种新型环保生土建筑材料应用于工程建设中。  相似文献   

9.
为评价SH固土剂的固化作用及对盐渍土的固化效果,分别完成了固化前后蒙脱石、高岭石、石英砂、盐渍土的X射线衍射与红外光谱测试、4种固化土的实体显微镜和偏光显微镜观察、固化前后盐渍土的扫描电镜微观观察,以及固化盐渍土的力学性能测试与冻融实验。实验结果表明:4种固化土的X射线衍射谱图和红外光谱图与固化前的吻合;各固化土的矿物成分没有发生改变,SH固土剂的官能团与黏土矿物均未发生化学键的结合,没有生成新相物质;SH固土剂干燥后形成弹性立体丝网,将土颗粒黏结在一起,提高了固化土的强度;固土剂填塞部分孔隙,减小了土的孔隙度;SH固土剂包裹土颗粒,增强了土的憎水性。固化盐渍土的力学性能测试和冻融实验结果证实,掺加SH固土剂提高了土的强度与抗变形性能、水稳性、抗渗性和抗冻融性能。SH固土剂与黏土矿物及盐渍土未发生化学反应,固化土力学性能的提高为固土剂的物理作用所致。  相似文献   

10.
金矿尾砂矿物聚合材料的制备及其影响因素   总被引:2,自引:0,他引:2       下载免费PDF全文
通过利用金矿尾砂制备矿物聚合材料,系统地讨论了不同条件下材料抗压强度变化趋势。所用原料配比为80%金矿尾砂、20%变高岭石、固/液质量比为4.7及水/碱质量比为5,采用半干压法成型,在某一温度下固化一定时间,测定材料的力学强度。实验结果为固化温度从60℃升高到80℃、成型压力从8MPa、16MPa加大到24MPa及固化时间从24h延长到72h都会使材料的抗压强度提高;室温放置时间3、7、14、28d,抗压强度呈增高趋势;外加碱激发剂KOH比Na0H所形成的材料抗压强度高,当碱(Na20或Na20 K20)/SiO2摩尔比为1时,材料的强度达到最大值;钾长石含量较多的骨料比石英骨料及含钾长石较少的骨料材料抗压强度高。实验结果表明,温度升高、成型压力加大和固化时间延长均促进了聚合反应的发生。材料在室温下由于不断从空气中获得水分而使聚合反应不断发生。碱激发剂中K^ 比Na^ 更易使聚合作用进行。含料中高度聚合的钾可被释放出来参与聚合反应。骨料在矿物聚合反应过程中主要以惰性填充方式存在,但仍然参与了聚合反应。  相似文献   

11.
Pant-y-ffynnon Quarry in South Wales yielded a rich cache of fossils in the early 1950s, including articulated specimens of new species (the small sauropodomorph dinosaur Pantydraco caducus and the crocodylomorph Terrestrisuchus gracilis), but no substantial study of the wider fauna of the Pant-y-ffynnon fissure systems has been published. Here, our overview of existing specimens, a few described but mostly undescribed, as well as freshly processed material, provides a comprehensive picture of the Pant-y-ffynnon palaeo-island of the Late Triassic. This was an island with a relatively impoverished fauna dominated by small clevosaurs (rhynchocephalians), including a new species, Clevosaurus cambrica, described here from a partially articulated specimen and isolated bones. The new species has a dental morphology that is intermediate between the Late Triassic Clevosaurus hudsoni, from Cromhall Quarry to the east, and the younger C. convallis from Pant Quarry to the west, suggesting adaptive radiation of clevosaurs in the palaeo-archipelago. The larger reptiles on the palaeo-island do not exceed 1.5?m in length, including a small carnivorous crocodylomorph, Terrestrisuchus, and a possible example of insular dwarfism in the basal dinosaur Pantydraco.  相似文献   

12.
Lithostratigraphy, physicochemical stratigraphy, biostratigraphy, and geochronology of the 77–70 Ma old series bracketing the Campanian–Maastrichtian boundary have been investigated by 70 experts. For the first time, direct relationships between macro- and microfossils have been established, as well as direct and indirect relationships between chemo-physical and biostratigraphical tools. A combination of criteria for selecting the boundary level, duration estimates, uncertainties on durations and on the location of biohorizons have been considered; new chronostratigraphic units are proposed. The geological site at Tercis is accepted by the Commission on Stratigraphy as the international reference for the stratigraphy of the studied interval. To cite this article: G.S. Odin, C. R. Geoscience 334 (2002) 409–414.  相似文献   

13.
Robert L. Linnen   《Lithos》2005,80(1-4):267-280
The solubilities of columbite, tantalite, wolframite, rutile, zircon and hafnon were determined as a function of the water contents in peralkaline and subaluminous granite melts. All experiments were conducted at 1035 °C and 2 kbar and the water contents of the melts ranged from nominally dry to approximately 6 wt.% H2O. Accessory phase solubilities are not affected by the water content of the peralkaline melt. By contrast, solubilities are affected by the water content of the subaluminous melt, where the solubilities of all the accessory phases examined increase with the water content of the melt, up to 2 wt.% H2O. At higher water contents, solubilities are nearly constant. It can be concluded that water is not an important control of accessory phase solubility, although the water content will affect diffusivities of components in the melt, thus whether or not accessory phases will be present as restite material. The solubility behaviour in the subaluminous and peralkaline melts supports previous spectroscopic studies, which have observed differences in the coordination of high field strength elements in dry vs. wet subaluminous granitic glasses, but not for peralkaline granitic glasses. Lastly, the fact that wolframite solubility increases with increasing water content in the subaluminous melt suggests that tungsten dissolved as a hexavalent species.  相似文献   

14.
15.
Calcite samples were extracted both from the rock matrix and the superficial coating of a karstified fault plane of an underground quarry, located in the eastern border of the Paris basin. The karstification is dated as Quaternary. Analysis of mechanical calcite twinning reveals that only the calcite matrix has also undergone a compression trending WNW that can be attributed to the Mio-Pliocene alpine collision. Both coating and matrix have undergone a strike-slip regime with σ1 roughly trending north–south, that could correspond to the regional present-day state of stress, a strike-slip compression rather trending NNW, modified by local phenomena. To cite this article: M. Rocher et al., C. R. Geoscience 335 (2003).  相似文献   

16.
正20141520 Bo Ying(Key Laboratory of Metallogeny and Mineral Assessment,MLR,Beijing 100037,China);Liu Chenglin Saline Spring Hydrochemical Characteristics and Indicators for Potassium Exploration in Southwestern and Northern Tarim Basin,Xinjiang(Acta Geoscientica Sinica,ISSN1006-3021,CN11-3474/P,34(5),2013,p.594-602,5 illus.,3 tables,28 refs.)  相似文献   

17.
正20141243Chen Ge(Hangzhou Research Institute of Petroleum Geology,PetroChina,Hangzhou 310023,China);Si Chunsong Study on Sedimentary Numerical Simulation Method of Fan Delta Sand Body(Journal of Geology,  相似文献   

18.
正20142599Chen Sanming(Guangxi Key Laboratory of Concealed Deposits Exploration,Guilin University of Technology,Guilin541004,China);He Yuzhou Block Model and Reserves Estimation of Panzhihua Iron Deposit Based on 3D Geological Modeling(Journal of Guilin University of Technology,ISSN1674-9057,CN45-1375/N,33(4),2013,p.610-615,9illus.,1table,15refs.)  相似文献   

19.
正20140594 Bai Daoyuan(Hunan Institute of Geology Survey,Changsha 410016,China);Zhong Xiang Faults in the Jingzhou Basin and Their Tectonic Settings(Geotectonica et Metallogenia,ISSN1001-1552,CN44-1595/P,37(2),2013,p.173-183,6illus.,59refs.)Key words:basin evolution,tectonic setting,South China In the Upper Paleozoic and Jurassic se-  相似文献   

20.
正20141912Cao Hui(State Key Laboratory for Continental Tectonics and Dynamics,Institute of Geology,Chinese Academy of Geological Sciences,Beijing 100037,China)Gravitational Collapse and Folding during Orogenesis:A Comparative Study of FIA Trends and Fold Axial Plane Traces(Geology in China,ISSN1000-3657,CN11-1167/P,40(6),2013,p.1818-1828,9illus.,35refs.,with  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号