首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The utilization of anthropogenic CO2 for enhanced oil recovery (EOR) can significantly extend the production life of an oil field, and help in the reduction of atmospheric emission of anthropogenic CO2 if sequestration is considered. This work summarizes the prospect of EOR and sequestration using CO2 flooding from an Indian mature oil field at Cambay basin through numerical modelling, simulation and pressure study based on limited data provided by the operator. To get an insight into CO2-EOR and safe storage process in this oil field, a conceptual sector model is developed and screening standard is proposed keeping in mind the major pay zone of the producing reservoir. To construct the geomodel, depth maps, well positions and coordinates, well data and well logs, perforation depths and distribution of petrophysical properties as well as fluid properties provided by the operator, has been considered. Based on the results from the present study, we identified that the reservoir has the potential for safe and economic geological sequestration of 15.04×106 metric ton CO2 in conjunction with a substantial increase in oil recovery of 10.4% of original oil in place. CO2-EOR and storage in this mature field has a bright application prospect since the findings of the present work could be a better input to manage the reservoir productivity, and the pressure field for significant enhancement of oil recovery followed by safe storage.  相似文献   

2.
CO2 pilot injection studies, with site-specific geologic assessment and engineering reservoir design, can be instrumental for demonstrating both incremental enhanced oil recovery and permanent geologic storage of greenhouse gases. The purpose of this paper is to present the geologic and reservoir analyses in support of a field pilot test that will evaluate the technical and economic feasibility of commercial-scale CO2-enhanced oil recovery to increase oil recovery and extend the productive life of the Citronelle Oil Field, the largest conventional oil field in Alabama (SE USA). Screening of reservoir depth, oil gravity, reservoir pressure, reservoir temperature, and oil composition indicates that the Cretaceous-age Donovan sand, which has produced more than 169 × 106 bbl in Citronelle Oil Field, is amenable to miscible CO2 flooding. The project team has selected an 81 ha (200 ac) 5-spot test site with one central gas injector, two producers, and two initially temporarily abandoned production wells that are now in production. Injection is planned in two separate phases, each consisting of 6,804 t (7,500 short tons) of food-grade CO2. The Citronelle Unit B-19-10 #2 well (Permit No. 3232) is the CO2 injector for the first injection test. The 14-1 and 16-2 sands of the upper Donovan are the target zones. These sandstone units consist of fine to medium-grained sandstone that is enveloped by variegated mudstone. Both of these sandstone units were selected based on the distribution of perforated zones in the test pattern, production history, and the ability to correlate individual sandstone units in geophysical well logs. The pilot injections will evaluate the applicability of tertiary oil recovery to Citronelle Field and will provide a large volume of information on the pressure response of the reservoirs, the mobility of fluids, time to breakthrough, and CO2 sweep efficiency. The results of the pilot injections will aid in the formulation of commercial-scale reservoir management strategies that can be applied to Citronelle Field and other geologically heterogeneous oil fields and the design of similar pilot injection projects.  相似文献   

3.
Documenting geographic distribution and spatial linkages between CO2 sources and potential sinks in areas with significant levels of CO2 emissions is important when considering carbon-management strategies such as geologic sequestration or enhanced oil recovery (EOR). For example, the US Gulf Coast overlies a thick succession (>6,000 m [>20,000 ft]) of highly porous and permeable sandstone formations separated by thick, regionally extensive shale aquitards. The Gulf Coast and Permian Basin also have a large potential for EOR, in which CO2 injected into suitable oil reservoirs could be followed by long-term storage of CO2 in nonproductive formations below reservoir intervals. For example, >6 billion barrels (Bbbl) of oil from 182 large reservoirs is technically recoverable in the Permian Basin as a result of miscible-CO2 flooding. The Gulf Coast also contains an additional 4.5 Bbbl of oil that could be produced by using miscible CO2. Although the CO2 pipeline infrastructure is well-developed in the Permian Basin, east Texas and the Texas Gulf Coast may have a greater long-term potential for deep, permanent storage of CO2 because of thick brine-bearing formations near both major subsurface and point sources of CO2.  相似文献   

4.
Geological storage of CO2 in the offshore Gippsland Basin, Australia, is being investigated by the Cooperative Research Centre for Greenhouse Gas Technologies (CO2CRC) as a possible method for storing the very large volumes of CO2 emissions from the nearby Latrobe Valley area. A storage capacity of about 50 million tonnes of CO2 per annum for a 40-year injection period is required, which will necessitate several individual storage sites to be used both sequentially and simultaneously, but timed such that existing hydrocarbon assets will not be compromised. Detailed characterisation focussed on the Kingfish Field area as the first site to be potentially used, in the anticipation that this oil field will be depleted within the period 2015–2025. The potential injection targets are the interbedded sandstones of the Paleocene-Eocene upper Latrobe Group, regionally sealed by the Lakes Entrance Formation. The research identified several features to the offshore Gippsland Basin that make it particularly favourable for CO2 storage. These include: a complex stratigraphic architecture that provides baffles which slow vertical migration and increase residual gas trapping and dissolution; non-reactive reservoir units that have high injectivity; a thin, suitably reactive, lower permeability marginal reservoir just below the regional seal providing mineral trapping; several depleted oil fields that provide storage capacity coupled with a transient production-induced flow regime that enhances containment; and long migration pathways beneath a competent regional seal. This study has shown that the Gippsland Basin has sufficient capacity to store very large volumes of CO2. It may provide a solution to the problem of substantially reducing greenhouse gas emissions from future coal developments in the Latrobe Valley.  相似文献   

5.
《International Geology Review》2012,54(14):1792-1812
Abundant crude oil and CO2 gas coexist in the fourth member of the Upper Cretaceous Quantou reservoir in the Huazijing Step of the southern Songliao Basin, China. Here, we present results of a petrographic characterization of this reservoir based on polarizing microscope, X-ray diffraction, fluid inclusion, and carbon–oxygen isotopic data. These data were used to identify whether CO2 might be trapped in minerals after the termination of a CO2-enhanced oil recovery (EOR) project, and to determine what effects might the presence of CO2 have on the properties of crude oil in the reservoir. The crude oil reservoir in the study area, which coexists with mantle-derived CO2, is hosted by dawsonite-bearing lithic arkoses and feldspathic litharenites. These sediments are characterized by a paragenetic sequence of clay, quartz overgrowth, first-generation calcite, dawsonite, second-generation calcite, and ankerite. The dawsonite analysed during this study exhibits δ13 C (Peedee Belemnite, PDB) values of ?4.97‰ to 0.67‰, which is indicative for the formation of magmatic–mantle CO2. The paragenesis and compositions of fluid inclusions in the dawsonite-bearing sandstones record a sequence of two separate filling events, the first involving crude oil and the second involving magmatic–mantle CO2. The presence of prolate primary hydrocarbon inclusions within the dawsonite indicates that these minerals precipitated from oil-bearing pore fluids at temperatures of 94–97°C, in turn suggesting that CO2 could be stored as carbonate minerals after the termination of a CO2-EOR project. In addition, the crude oil in the basin would become less dense after deposition of bitumen by deasphalting the injection of CO2 gas into the oil pool.  相似文献   

6.
Carbon dioxide enhanced oil recovery (CO2-EOR) has been widely applied to the process of carbon capture, utilization, and storage (CCUS). Here, we investigate CO2–oil–water–rock interactions under reservoir conditions (100 °C and 24 MPa) in order to understand the fluid–rock interactions following termination of a CO2-EOR project. Our experimental results show that CO2-rich fluid remained the active fluid controlling the dissolution–precipitation processes in an oil-undersaturated sandstone reservoir; e.g., the dissolution of feldspar and calcite, and the precipitation of kaolinite as well as solid phases comprising O, Si, Al, Na, C, and Ti. Mineral dissolution rates were reduced in the case that mineral surfaces were coated by oil. Mineral wettability and composition, and oil saturation were the main controls on the exposed surface area of grains, and mineral wettability in particular led to selective dissolution. In addition, the permeability of the reservoir decreased substantially due to the precipitation of kaolinite and solid-phase particles, and due to the clogging of less soluble mineral particles released by the dissolution of K-feldspar and carbonate cement, whereas porosity increased. The results provide insight into potential formation damage resulting from CO2-EOR projects.  相似文献   

7.
The efficiency and sustainability of carbon dioxide (CO2) storage in deep geological formations crucially depends on the integrity of the overlying cap-rocks. Existing oil and gas wells, which penetrate the formations, are potential leakage pathways. This problem has been discussed in the literature, and a number of investigations using semi-analytical mathematical approaches have been carried out by other authors to quantify leakage rates. The semi-analytical results are based on a number of simplifying assumptions. Thus, it is of great interest to assess the influence of these assumptions. We use a numerical model to compare the results with those of the semi-analytical model. Then we ease the simplifying restrictions and include more complex thermodynamic processes including sub- and supercritical fluid properties of CO2 and non-isothermal as well as compositional effects. The aim is to set up problem-oriented benchmark examples that allow a comparison of different modeling approaches to the problem of CO2 leakage.  相似文献   

8.
In subsurface flow modeling, compositional simulation is often required to model complex recovery processes, such as gas/CO 2 injection. However, compositional simulation on fine-scale geological models is still computationally expensive and even prohibitive. Most existing upscaling techniques focus on black-oil models. In this paper, we present a general framework to upscale two-phase multicomponent flow in compositional simulation. Unlike previous studies, our approach explicitly considers the upscaling of flow and thermodynamics. In the flow part, we introduce a new set of upscaled flow functions that account for the effects of compressibility. This is often ignored in the upscaling of black-oil models. In the upscaling of thermodynamics, we show that the oil and gas phases within a coarse block are not at chemical equilibrium. This non-equilibrium behavior is modeled by upscaled thermodynamic functions, which measure the difference between component fugacities among the oil and gas phases. We apply the approach to various gas injection problems with different compositional features, permeability heterogeneity, and coarsening ratios. It is shown that the proposed method accurately reproduces the averaged fine-scale solutions, such as component overall compositions, gas saturation, and density solutions in the compositional flow.  相似文献   

9.
An overview on the tectono-stratigraphic framework of the Arabian plate indicates obvious differences between two distinct areas: the hydrocarbon-prolific sector and non-hydrocarbon-prolific sector. These differences resulted from the interplay of a variety of factors; some of which are related to the paleo-geographic configuration (eustatic sea level fluctuations, climatic conditions, and salt Basins), others to differential subsidence (burial) and structural inversions. During the Paleozoic, the regional compression was caused by far field effects of the Hercynian orogeny. This led to major folded structures in central and eastern Saudi Arabia (e.g. Ghawar anticline). During the Mesozoic, the most important tectonic factor was the stretching of the crust (extension), accompanied with the increase in temperature, resulting in an increase of the accommodation space, and thicker sedimentary successions. Regional unconformities are mostly found where folded structures are dominant, and they acted as a carrier systems for the accumulation of hydrocarbon and groundwater. A good understanding of the stratigraphy and tectonic evolution is, thus, required to develop carbon capture and storage (CCS) and to design efficiently enhanced oil recovery (EOR) in both sectors. Oil and gas reservoirs offer geologic storage potential as well as the economic opportunity of better production through CO2-EOR. The world greatest hydrocarbon reservoirs mainly consist of Jurassic carbonate rocks, and are located around the Arabian Basin (including the eastern KSA and the Arabian Gulf). The Cretaceous reservoirs, which mainly consist of calcarenite and dolomite, are located around the Gotnia salt Basin (northeast of KSA). Depleted oil and gas fields, which generally have proven as geologic traps, reservoirs and seals, are ideal sites for storage of injected CO2. Each potential site for CO2-EOR or CCS should be evaluated for its potential storage with respect to the containment properties, and to ensure that conditions for safe and effective long term storage are present. The secured deep underground storage of CO2 implies appropriate geologic rock formations with suitable reservoir rocks, traps, and impermeable caprocks. Proposed targets for CCS, in the non-hydrocarbon-prolific sector, are Kharij super-aquifer (Triassic), Az-Zulfi aquifer (Middle Jurassic), Layla aquifer (Late Jurassic), and Wasia aquifer (Middle Cretaceous). Proposed targets for EOR are Safaniya oil field (Middle Cretaceous) (Safaniya, Wara and Khafji reservoirs), Manifa oil field (Las, Safaniya and Khafji reservoirs) (Late Jurassic), and Khuff reservoir (Late Permian-Early Triassic) in central to eastern KSA.  相似文献   

10.
Carbon dioxide (CO2) has been injected in the subsurface permeable formations as a means to cut atmospheric CO2 emissions and/or enhance oil recovery (EOR). It is important to constrain the boundaries of the CO2 plume in the target formation and/or other formations hosting the CO2 migrated from the target formation. Monitoring methods and technologies to assess the CO2 plume boundaries over time within a reservoir of interest are required. Previously introduced methods and technologies on pressure monitoring to detect the extent of the CO2 plume require at least two wells, i.e. pulser and observation wells. We introduce pressure transient technique requiring single well only. Single well pressure transient testing (drawdown/buildup/injection/falloff) is widely used to determine reservoir properties and wellbore conditions. Pressure diagnostic plots are used to identify different flow regimes and determine the reservoir/well characteristics. We propose a method to determine the plume extent for a constant rate pressure transient test at a single well outside the CO2 plume. Due to the significant contrast between mobility and storativity of the CO2 and native fluids (oil or brine), the CO2 boundary causes deviation in the pressure diagnostic response from that corresponding to previously identified heterogeneities. Using the superposition principle, we develop a relationship between the deviation time and the plume boundary. We demonstrate the applicability of the proposed method using numerically generated synthetic data corresponding to homogeneous, heterogeneous, and anisotropic cases to evaluate its potential and limitations. We discuss ways to identify and overcome the potential limitations for application of the method in the field.  相似文献   

11.
Modeling geological carbon storage represents a new and substantial challenge for the subsurface geosciences. To increase understanding and make good engineering decisions, containment processes and large-scale storage operations must be simulated in a thousand-year perspective. Large differences in spatial and temporal scales make it prohibitively expensive to compute the fate of injected CO2 using traditional 3D simulators. Instead, accurate forecast can be computed using simplified models that are adapted to the specific setting of the bouyancy-driven migration of the light fluid phase. This paper presents a family of vertically integrated models for studying the combined large-scale and long-term effects of structural, residual, and solubility trapping of CO2. The models are based on an assumption of a sharp interface separating CO2 and brine and can provide a detailed inventory of the injected CO2 volumes over periods of thousands of years within reasonable computational time. To be compatible with simulation tools used in industry, the models are formulated in a black-oil framework. The models are implemented in MRST-co2lab, which is an open community software developed especially to study and optimize large-scale, long-term geological storage of CO2. The resulting simulators are fully implicit and handle input from standard geomodeling tools.  相似文献   

12.
结合CO_2地质利用与封存技术机理,在国际权威潜力评估公式的基础上,系统地提出了适合中国地质背景的次盆地尺度CO_2封存潜力评估方法及关键参数取值。同时,以四川盆地为例,依次开展了枯竭油田地质封存与CO_2强化石油开采、枯竭气田与CO_2强化采气、不可采煤层地质封存与CO_2驱替煤层气,以及咸水层地质封存技术的CO_2地质封存潜力。结果表明,四川盆地利用深部咸水层与枯竭天然气田CO_2地质封存潜力最大,期望值分别达154.20×10~8t和53.73×10~8t。其中,枯竭天然气田因成藏条件好、勘探程度高、基础建设完善,为四川盆地及其周边利用枯竭气田CO_2地质封存技术实现低碳减排提供了早期示范机会。CO_2地质利用与封存潜力评估方法,对进一步开展全国次盆地尺度理论封存潜力评估与工程规划具有重要意义。  相似文献   

13.
We have studied melt and fluid inclusions in minerals from alkali basalts, mantle xenoliths, and dawsonite-bearing sandstones from the Shuangliao volcanic field in southern Songliao Basin, Northeast China. The inclusions have been investigated using petrographic, geochemical, and laser Raman spectroscopic techniques. Volcanic rocks of the Shuangliao field are predominantly alkali olivine basalts that contain rare mantle xenoliths. Silicate melt and fluid inclusions are common in both olivine phenocrysts and the mantle xenoliths. The fluid inclusions are mainly composed of CO2 with small amounts of CO, CH4, N2, and H2O, which is consistent with an upper mantle origin. CO2 gas reservoirs in the southern Songliao Basin are mostly derived from a mantle–magmatic source. Coeval fluid-inclusion homogenization temperatures, coupled with the thermal burial history, show that the CO2 gas reservoirs in the southern Songliao Basin are Cenozoic (40–63 Ma) and coeval with the magmatism in the Shuangliao volcanic field. Despite the relatively small scale of this volcanic activity, it released large amounts of CO2. Much of the magma was not erupted, and CO2- and H2O-rich magma was probably intruded into the basin along deep faults, acting as a major source of inorganic CO2 gas in the southern Songliao Basin.  相似文献   

14.
Miller field of the North Sea has had high concentrations of natural CO2 for ~70 Ma. It is an ideal analog for the long-term fate of CO2 during engineered storage, particularly for formation of carbonate minerals that permanently lock up CO2 in solid form. The Brae Formation reservoir sandstone contains an unusually high quantity of calcite concretions; however, C and O stable isotopic signatures suggest that these are not related to the present-day CO2 charge. Margins of the concretions are corroded, probably because of reduced pH due to CO2 influx. Dispersed calcite cements are also present, some of which postdate the CO2 charge and, therefore, are the products of mineral trapping. It is calculated that only a minority of the reservoired CO2 in Miller (6–24%) has been sequestrated in carbonates, even after 70 Ma of CO2 emplacement. Most of the CO2 accumulation is dissolved in pore fluids. Therefore, in a reservoir similar to the Brae Formation, engineered CO2 storage must rely on physical retention mechanisms because mineral trapping is both incomplete and slow.  相似文献   

15.
《地学前缘(英文版)》2020,11(5):1743-1754
Broad-band and long-period magnetotelluric(MT) data were acquired along an east-west trending traverse of nearly 200 km across the Kachchh,Cambay rift basins,and Aravalli-Delhi fold belt(ADFB),western India.The regional strike analysis of MT data indicated an approximate N59°E geoelectric strike direction under the traverse and it is in fair agreement with the predominant geological strike in the study area.The decomposed transverse electric(TE)-and transverse magnetic(TM)-data modes were inverted using a nonlinear conjugate gradient algorithm to image the electrical lithospheric structure across the Cambay rift basin and its surrounding regions.These studies show a thick(～1-5 km) layer of conductive Tertiary-Mesozoic sediments beneath the Kachchh and Cambay rift basins.The resistive blocks indicate presence of basic/ultrabasic volcanic intrusives,depleted mantle lithosphere,and different Precambrian structural units.The crustal conductor delineated within the ADFB indicates the presence of fluids within the fault zones,sulfide mineralization within polyphase metamorphic rocks,and/or Aravalli-Delhi sediments/metasediments.The observed conductive anomalies beneath the Cambay rift basin indicate the presence of basaltic underplating,volatile(CO_2,H_2 O) enriched melts and channelization of melt fractions/fluids into crustal depths that occurred due to plume-lithosphere interactions.The variations in electrical resistivity observed across the profile indicate that the impact of Reunion plume on lithospheric structures of the Cambay rift basin is more dominant at western continental margin of India(WCMI) and thus support the hypothesis proposed by Campbell Griffiths about the plume-lithosphere interactions.  相似文献   

16.
《Applied Geochemistry》2003,18(12):1825-1838
One of the proposals for large-scale sequestration of fossil fuel-derived CO2 is deep geologic disposal in depleted oil/gas reservoirs or deep aquifers. Previously published scenarios for this inadequately proven technology have either ignored or dismissed the possibility of vertical migration of gases caused by overpressure. Overpressuring of a reservoir or aquifer will be necessary in order to have acceptable rates for dispersal of injected CO2. This research describes methodology and the results of measurement of microseepage of CO2 and CH4 at a large-scale CO2-enhanced oil recovery (EOR) operation at Rangely, Colorado, USA. Shallow and deep soil gas concentrations, and direct transport of CO2 and CH4 into the atmosphere were measured. The interpretation of the measurements was complemented by both stable and radiogenic isotopic measurements of C. The results have demonstrated an estimated microseepage to the atmosphere of approximately 400 metric tonnes of CH4/a from the 78 km2 area of the Rangely field. Preliminary estimates of deep-sourced CO2 losses are <3800 tonnes/a, based on stable isotope measurements of soil gases. Several holes up to 10 m deep were drilled on, and off the field for nested gas sampling of composition and stable C isotopic ratios for CO2 and CH4. Carbon-14 measurements on CO2 from these holes indicate that deep-sourced CO2 microseepage losses were approximately 170 tonnes/a.  相似文献   

17.
Coal gasification with CO2 has emerged as a cleaner and more efficient way for the production of energy, and it offers the advantages of CO2 mitigation policies through simultaneous CO2 sequestration. In the present investigation, a feasibility study on the gasification of three low-quality, high-sulphur coals from the north-eastern region (NER) of India in a CO2 atmosphere using thermogravimetric analysis (TGA-DTA) has been made in order to have a better understanding of the physical and chemical characteristics in the process of gasification of coal. Model-free kinetics was applied to determine the activation energies (E) and pre-exponential factors (A) of the CO2 gasification process of the coals. Multivariate non-linear regression analyses were performed to find out the formal mechanisms, kinetic model, and the corresponding kinetic triplets. The results revealed that coal gasification with CO2 mainly occurs in the temperature range of 800°–1400°C and a maximum of at around 1100°C. The reaction mechanisms responsible for CO2 gasification of the coals were observed to be of the ‘nth order with autocatalysis (CnB)’ and ‘nth order (Fn) mechanism’. The activation energy of the CO2 gasification was found to be in the range 129.07–146.81 kJ mol?1.  相似文献   

18.
Enhanced oil recovery based on CO2 injection is expected to increase recovery from Croatian oil fields. Large quantities of CO2 are generated during hydrocarbon processing produced from gas and gas condensate fields situated in the north-western part of Croatia. First CO2 injection project will be implemented on the Ivani? Oil Field. Numerical modelling based on Upper Miocene sandstone core samples testing results have shown the decrease of oil viscosity during CO2 injection. Some of the characteristics of the testing samples are porosity 21.5–23.6 %, permeability 14–80 × 10?15 m2 and initial water saturation 28–38.5 %. Water alternating foam (WAF) and water alternating gas (WAG) simulations have provided satisfactory results. The WAF injection process has provided better results, but due to the process sensitivity and costs WAG is recommended for future application. During the pilot project 16 × 106 m3 CO2 and 5 × 104 m3 of water were injected. Additional amounts of hydrocarbons (4,440 m3 of oil and 2.26 × 106 m3 of gas) were produced which confirmed injection of CO2 as a successful tertiary oil recovery mechanism in Upper Miocene sandstone reservoirs in the Croatian part of the Pannonian Basin System.  相似文献   

19.
One of the proposals for large-scale sequestration of fossil fuel-derived CO2 is deep geologic disposal in depleted oil/gas reservoirs or deep aquifers. Previously published scenarios for this inadequately proven technology have either ignored or dismissed the possibility of vertical migration of gases caused by overpressure. Overpressuring of a reservoir or aquifer will be necessary in order to have acceptable rates for dispersal of injected CO2. This research describes methodology and the results of measurement of microseepage of CO2 and CH4 at a large-scale CO2-enhanced oil recovery (EOR) operation at Rangely, Colorado, USA. Shallow and deep soil gas concentrations, and direct transport of CO2 and CH4 into the atmosphere were measured. The interpretation of the measurements was complemented by both stable and radiogenic isotopic measurements of C. The results have demonstrated an estimated microseepage to the atmosphere of approximately 400 metric tonnes of CH4/a from the 78 km2 area of the Rangely field. Preliminary estimates of deep-sourced CO2 losses are <3800 tonnes/a, based on stable isotope measurements of soil gases. Several holes up to 10 m deep were drilled on, and off the field for nested gas sampling of composition and stable C isotopic ratios for CO2 and CH4. Carbon-14 measurements on CO2 from these holes indicate that deep-sourced CO2 microseepage losses were approximately 170 tonnes/a.  相似文献   

20.
Basalts interbedded with oil source rocks are discovered frequently in rift basins of eastern China, where CO2 is found in reservoirs around or within basalts, for example in the Binnan reservoir of the Dongying Depression. In the reservoirs, CO2 with heavy carbon isotopic composition (δ13C>-10‰ PDB) is in most cases accounts for 40% of the total gas reserve, and is believed to have resulted from degassing of basaltic magma from the mantle. In their investigations of the Binnan reservoir, the authors suggested that the CO2 would result from interactions between the source rocks and basalts. As the source rocks around basalts are rich in carbonate minerals, volcanic minerals, transition metals and organic matter, during their burial history some of the transition metals were catalyzed on the thermal degradation of organic matter into hydrocarbons and on the decomposition of carbonate minerals into CO2, which was reproduced in thermal simulations of the source rocks with the transition metals (Ni and Co). This kind of CO2 accounts for 55%-85% of the total gas reserve generated in the process of thermal simulation, and its δ13C values range from -11‰- -7.2‰ PDB, which are very similar to those of CO2 found in the Binnan reservoir. The co-generation of CO2 and hydrocarbon gases makes it possible their accumulation together in one trap. In other words, if the CO2 resulted directly from degassing of basaltic magma or was derived from the mantle, it could not be accumulated with hydrocarbon gases because it came into the basin much earlier than hydrocarbon generation and much earlier than trap formation. Therefore, the source rocks around basalts generated hydrocarbons and CO2 simultaneously through catalysis of Co and Ni transition metals, which is useful for the explanation of co-accumulation of hydrocarbon gases and CO2 in rift basins in eastern China.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号