首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 984 毫秒
1.
在频率域里研究了上海及邻近地区的Q值、小震震源参数,初步得到如下结果:①以上海佘山为中心,平均直达P波Q值呈方向性分布。在相同震中距下,上海西面溧阳方向(?)值较高,上海北部南黄海方向(?)值较低;溧阳和南黄海地震活跃区域的(?)值比其邻近地震相对不活跃区域的偏高,②相同震级的地震相比之下,上海—溧阳方向的地震破裂尺度小,上海—南黄海方向的地震破裂尺度大;并且震级在2.5—4.0级之间的地震,破裂尺度的数值溧阳的比较集中,南黄海的则比较离散。  相似文献   

2.
本文看重从余震能量的分布及地质条件来研究江苏省溧阳县6.0级地震序列活动。一、历史地震活动背景溧阳县位于江苏省南部。历史上江苏省杨州以南除1624年2月10日杨州发生—6级地震外,无其他6级以上地震记载。这是一个地震活动水平低的地区、溧阳县自公元1402年至1900年为止先后共发生有感地震计13次之多记载如下:  相似文献   

3.
体应变数字记录特征与中强震关系初探   总被引:1,自引:0,他引:1  
通过对溧阳地震台体应变资料的分析研究 ,发现南黄海中强震和台湾大震前后 ,溧阳台体应变观测到一些前兆异常反映 ,异常幅度达 1 4 4× 10 - 7;并且找出了南黄海地震以及台湾大震前溧阳台体应变观测的异常特征。  相似文献   

4.
在1974年溧阳5.5级地震和1979年溧阳6.0级地震之后,作者对华北北部的中期地震趋势进行了研究,发现溧阳两次地震与华北北部地震有呼应关系,现将研究结果介绍如下。1.华北板块边界带  相似文献   

5.
本文分析了发生在江苏省境内的三次地震的地应变临震前兆特征。这三次地震是1979年7月9日溧阳6.0级地震、1987年2月17日射阳5.1级地震和1990年2月10日常熟5.1级地震。在本文中,作者还对利用地应变临震前兆进行临震预报的有关问题作了讨论。  相似文献   

6.
第三篇文章是关于1979年7月9日江苏省溧阳6级地震的震害经济损失调查报告,主要内容包括:引言、溧阳地震区概况、溧阳地震震害经济损失情况、溧阳减轻地震灾害的做法、对诸如怎样认识、统计、衡量和减轻震害经济损失的几个问题的探讨以及结语。  相似文献   

7.
临震电磁波前兆的观测研究   总被引:2,自引:0,他引:2       下载免费PDF全文
本文介绍江苏地区震前电磁波观测台网几年来的实际观测资料,并根据1979年溧阳Ms6.0、1983年山东荷泽 Ms5.9及1984年南黄海 Ms6.2级等地震前电磁波辐射信号的观测结果,讨论有关临震电磁波前兆问题.   相似文献   

8.
中国东部1974年和1979年溧阳地震是两次中强地震,但属破坏性地震。第一次地震(M_s=5.5)于1974年4月22日发生在人口密集的地区。第二次地震(M_s=5.7)于1979年7月9日几乎在同一地区发生。两次地震震中位于两断层的交汇附近,在晚中生代到晚第三纪的沉积拉张盆地内。本文利用2°和90°之间的长周期P波、SH波及短周期远震PD波波形,确定两次地震具有逆冲分量的走滑震源机制。这一机制与较早用P波初动解得到的结果有明显不同。后者得到两次地震的走滑分量和正滑分量。本次研究的结果是,1974年地震机制是走向126°,倾角71°,滑动角33°。震源深度、地震矩和应力降分别为12km,8.4×10~(23)dyne-cm(1dyne=10~(-5)N)和41bar。1979年地震机制是走向41°,倾角64°,滑动角147°。震源深度、地震矩和应力降分别为7.5km,1.6×10~(24)dyne-cm和152bar。地震学资料与实地调查表明,1974年地震是WNW走向断层破裂所致。1979年地震的断层面很难求解。溧阳地震的逆冲断裂,在中国东部的较大地震中是很少见的。这可能表明在现代的E-W到ENE-WSW向压应力场作用下,构造盆地下方断层重新被激活,而且发生逆转。  相似文献   

9.
近区有震异常与无震异常的判别——前兆测量实例分析   总被引:1,自引:0,他引:1  
江苏省溧阳地区1979年7月9日发生Ms 6.0级地震,震前有多种前兆变化;后于1981年3月及1982年3月相继发生了Ms 3.3及3.6级地震,距震中很近的溧阳台钻孔应力仪也记录到了明显的前兆异常。但溧阳台于1983年3月又记录到一次明显的异常,却无地震与其对应。这就出现了如何判别近区(数十公里范围内)有震异常与无震异常的问题。根据前兆实测资料,笔者拟对这个地震预报探索中不可回避的问题作一粗略探讨。  相似文献   

10.
溧阳震区岩石磁性的温度和应力效应   总被引:2,自引:0,他引:2  
本文测试了溧阳地震(M_s=6.0,1979.7.9)震中附近钻井中的岩石在不同温度下磁化率和天然剩余磁化强度随应力的变化。结果表明:1.岩样磁化率为(4-30)×4π×10~4,天然剩余磁化强度为(30-3000)mAm~(-1),居里温度均在580℃左右;2.室温下磁化率的应力灵敏度为(0.4-1.1)×10~(-3)(MPa)~(-1),与其他一些地区同类岩石相比偏低;磁化率应力灵敏度随温度增加,到某一峰值后下降,在邻近居里点处趋于零;3.天然剩余磁化强度的应力灵敏度为(0.2-2.3)×10~(-3)(MPa)~(-1)。分析表明,岩石压磁特性与磁性矿物的磁畴状态有关。 根据实验结果估算的由压磁效应引起的震磁异常仅有1nT的量级,由此推测,该地震前,在溧阳地磁台观测到的近10nT的磁异常很可能主要不是由压磁效应引起的。  相似文献   

11.
近震电磁信息异常特点及分析   总被引:2,自引:0,他引:2  
为探求应用电磁信息观测方法对未来地震三要素进行一定程度的预报,对距辽中台200km范围内的几次典型震例,在震前的观测资料进行初步总结和研究的分析。  相似文献   

12.
井间电磁成像系统应用研究   总被引:35,自引:8,他引:35       下载免费PDF全文
曾文冲  赵文杰  臧德福 《地球物理学报》2001,44(3):411-420,T002,T003
井间电磁(EM)成像系统的技术目标是实现井间电学特性的直接测量,并提供井间电阻率的二维及三维图像.从1997年开始,胜利油田与美国EMI公司合作,开展了EM技术的应用与研究,主要是通过大型、系统的现场试验,在大井间距的条件下,进一步验证仪器的性能,进行油藏研究的适用性和可行性分析;以系统的现场实测数据为依据,加快成像处理方法和软件的开发;开展穿透金属套管井的EM试验,探讨金属套管条件下的电阻率成像方法。两年来,利用EMI提供的XBH2000型测量系统,对胜利油田典型的低电阻率砂泥岩剖面,成功地进行了3对井、10个井次的试验。试验证明了仪器性能的可靠,取得了测量重复性好、系统完整的井间EM数据.并反演得到电阻率成像,在分析井间油气分布和油层开采动态方面,取得了良好的地质效果.  相似文献   

13.
时间域航空电磁数据的反演   总被引:3,自引:0,他引:3  
本文用广义逆矩阵理论讨论了时间域航空电磁数据的反演方法.以水平二层大地和球体模型为例进行了计算,结果表明这种方法对时间域电磁数据的反演是行之有效的.对于理论数据,一般仅需迭代数次即可稳定地收敛到真值.通过奇异值分析,可以确定一个模型中的相对重要参数和无关紧要参数;对于求解某一特定参数,可确定哪些数据起决定性的作用.由奇异值分解而得出的信息密度矩阵、模型分辨矩阵,分别给出了模型响应拟合数据和模型参数分辨率的度量.这些信息对于时间域航空电磁系统的设计、野外测量和资料解释都具有重要的参考价值.最后给出了实例.  相似文献   

14.
城市噪音主要指由于城市设施和人类活动 (如电网、管线、通讯设备、建筑物、交通等 )对电磁信号的干扰。克服城市噪音、提高信噪比是保证城市活断层的电磁探测能否成功的关键。因而 ,在福州市活断层的电磁试验探测中 ,噪音观测与分析被列为试验的一项重要内容 ① 。文中将主要讨论不同类型的噪音对高密度电法 (DC)和瞬变电磁法 (TEM)的影响 ,并提出一些实用的解决办法。试验表明 ,影响高密度电法观测质量的主要因素是地下噪音源 ,如地下管道、地下电缆等 ,地面以上噪音的影响相对较小。对于瞬变电磁法 ,不管地面以下还是地面以上的噪音源都将产生影响。但是 ,只要仪器的性能好 ,对不同噪音源采取相应的措施 ,可以获得满意的结果  相似文献   

15.
With the increasing number of channels in AEM systems, computer data handling is becoming a necessity. The experience gained in processing of seismic and aeromagnetic data cannot be applied directly to low-frequency (100-5000 Hz) AEM methods. A novel scheme has been designed for AEM data processing and tested on 2900 km (1800 miles) of Input surveys. In the first step, the digital flight tapes are merged with digitized flight path recovery to form the primary data set. The validity of the raw data is controlled by the computer, but the interpreter has an option of checking them in perspective plots of channel amplitudes. The primary data set is reduced by processors which determine the location and type of anomalies and discard noise. Unlike the widely used deconvolution, the sequential processor determines first the anomaly location and then estimates parameters, such as peak amplitude, base width, and excess area, which are used as acceptance criteria. Interpretation parameters, such as σt, conductor depth, and dip are estimated by comparison with quantitative models. The recorded channel amplitudes are plotted together with the selected interpretation parameters in a profile form. The secondary data set which includes only the interpretation parameters for selected anomalies is graphically displayed as a schematic map of apparent σt. Elongated features are traced by a fan strike recognition routine and a trend map is automatically compiled and plotted. Disk storage is essential for second pass processing during which parts of the primary data set are searched for undiscovered anomalies matching the analyzed trend. The suggested procedure for AEM data processing is demonstrated on an Input MK V survey, Southern Indian Lake, Manitoba.  相似文献   

16.
本文是根据地球基本磁場起源的“发电机”理论而提出的地磁場倒转的电磁模型,认为地磁場的倒转是地核内部“环型”場反向的结果,若地球转速的“突然”扰动够大,则地幔与地核之间的电磁作用可以引起地球内部“环型”場的反向,从而实现地磁場的倒转,计算表明,这一扰动的性质是地球蒋动周期的减小,其数量级为10~2毫秒。文章的末尾计论了反向地磁場的维持问题,得出倒转磁場维持的时间间隔约为10~3年-10~6年。  相似文献   

17.
The objective of this study is to generate the separation-distance-domain (r-domain) transformation of the theoretically calculated wave number domain (m-domain) electromagnetic induction field component Bz(m, ω) of a stratified medium and to search for interpretive information which has been absent in the previously achieved numerical solutions of the problem. The r-domain kernel R?(r, ω) function defining the induction field appears to adequately reflect the layering and electrical properties of the medium if it is expressed as a function of the frequency if the source-receiver separation r is small with respect to the thickness of the first layer. However, exact values of the conductivity cannot be distinguished from those of the neighboring values unless a resistive basement layer is present. This feature is the result of the truncation in series representation of the kernel function R?(m, ω). However, this truncation is regarded as significant in the case of a conductive first layer. In m-domain static-zone studies, a conductive first layer slightly influences its r-domain correspondent. Although the computational cost of obtaining the kernel B(r, ω) by evaluation of the convolution in a cylindrical coordinate system is high, this semi-analytic solution is still superior to those based on the asymptotic assumptions.  相似文献   

18.
岩石破裂过程中电磁辐射的实验研究   总被引:24,自引:5,他引:24       下载免费PDF全文
在单轴压力下对灰岩、花岗岩、石英岩三种样品的破裂过程与电磁辐射进行了实验室试验。结果表明,含有石英晶体的岩石,在破裂过程中产生的电磁信息,其振幅具有脉冲形态;随着应力水平的增高,电磁脉冲的频度增加,与声发射具有同步发展的趋势;不同结构的介质,主破裂前又呈现出平静和高潮两种不同类型。此外,含有石英晶体的岩石其主破裂及解体过程中,伴随最强的电磁脉冲,出现明显的闪光现象。文中对实验结果作了初步的讨论。  相似文献   

19.
开展天地一体化地震观测是目前推动地震短临科学研究取得突破的重要途径之一。以卫星观测为主要手段的空间对地观测技术是实现对我国及临区进行地震电磁效应高精度、大范围和大动态连续观测的有效途径,并且为地震短临预报开创空基监测的新思路。地面传输系统是连接地震电磁卫星各应用系统之间的重要桥梁和纽带。它的科学设计是地震电磁卫星项目建设的基础。本文拟从国内外发展现状、系统建设指导思想、系统组成、链路功能描述、系统运行性能指标等方面对我国即将建设的地震电磁卫星地面传输系统进行简要分析介绍,从而为地震电磁卫星地面传输系统初步设计的完成提供一个基本框架。  相似文献   

20.
Electromagnetic scale modelling for most conductors encountered in prospecting requires models of conductivity in the range 10-1000 S/m. A polyester composite filled with aluminium fillers is used to design the required materials. The fillers are chosen with a high aspect ratio to achieve the desired conductivities without altering mechanical properties. The design process, consisting of a chemical reaction, is simple, repeatable and easy to realize in a geophysical laboratory. The conductivity of the designed material is estimated by an inductive method based upon the variation of the quality factor of a coil in which the samples are inserted. This method is much less influenced by the distribution and orientation of fillers in the resin matrix than a galvanic method. The conductivities obtained fill the major part of the interval 10-1000 S/m without requiring unreasonable mixing ratios. The homogeneity of the material was tested and the anisotropy was low at high conductivities. The electrical properties do not vary with time in free air or when immersed in salt water. We propose standard curves giving conductivities of composites filled with aluminium fibres and flakes. A large cylindrical model of fixed resin-to-filler ratio was made to show the capability of the technique to produce models of useful size. Its measured conductivity agrees well with the expected conductivity from the established standard curves. A scale modelling experiment with the horizontal loop technique was carried out over a horizontal thin sheet made of the material, and again the conductivity obtained from the results agrees reasonably well with the expected value. The noted difference between the inductively and galvanically measured conductivities of the proposed material presently restricts the use of the technique to EM scale experiments for which the host rock is considered very resistive.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号