首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 78 毫秒
1.
Canopy interception of incident precipitation, as a critical component of a forest＇s water budget, can affect the amount of water available to the soil, and ultimately vegetation distribution and function. In this paper, a statistical-dynamic approach based on leaf area index and statistical canopy interception is used to parameterize the canopy interception process. The statistical-dynamic canopy interception scheme is implemented into the Community Land Model with dynamic global vegetation model （CLM-DGVM） to improve its dynamic vegetation simulation. The simulation for continental China by the land surface model with the new canopy interception scheme shows that the new one reasonably represents the precipitation intercepted by the canopy. Moreover, the new scheme enhances the water availability in the root zone for vegetation growth, especially in the densely vegetated and semi-arid areas, and improves the model＇s performance of potential vegetation simulation.  相似文献   

2.
We used sensitivity-analysis techniques to investigate the behaviour of the land-surface model UTOPIA while simulating the micrometeorology of a typical northern Italy vineyard (Vitis vinifera L.) under average climatic conditions. Sensitivity-analysis experiments were performed by sampling the vegetation parameter hyperspace using the Morris method and quantifying the parameter relevance across a wide range of soil conditions. This method was used since it proved its suitability for models with high computational time or with a large number of parameters, in a variety of studies performed on different types of biophysical models. The impact of input variability was estimated on reference model variables selected among energy (e.g. net radiation, sensible and latent heat fluxes) and hydrological (e.g. soil moisture, surface runoff, drainage) budget components. Maximum vegetation cover and maximum leaf area index were ranked as the most relevant parameters, with sensitivity indices exceeding the remaining parameters by about one order of magnitude. Soil variability had a high impact on the relevance of most of the vegetation parameters: coefficients of variation calculated on the sensitivity indices estimated for the different soils often exceeded 100 %. The only exceptions were represented by maximum vegetation cover and maximum leaf area index, which showed a low variability in sensitivity indices while changing soil type, and confirmed their key role in affecting model results.  相似文献   

3.
Accurate simulation of air quality at neighbourhood scales (on order of 1-km horizontal grid spacing) requires detailed meteorological fields inside the roughness sub-layer (RSL). Since the assumptions of the roughness approach, used by most of the mesoscale models, are unsatisfactory at this scale, a detailed urban and rural canopy parameterisation, called DA-SM2-U, is developed inside the Penn State/NCAR Mesoscale Model (MM5) to simulate the meteorological fields within and above the urban and rural canopies. DA-SM2-U uses the drag-force approach to represent the dynamic and turbulent effects of the buildings and vegetation, and a modified version of the soil model SM2-U, called SM2-U(3D), to represent the thermodynamic effects of the canopy elements. The turbulence length scale is also modified inside the canopies. SM2-U(3D) assesses the sensible and latent heat fluxes from rural and urban surfaces in each of the computational layers inside the canopies by considering the shadowing effect, the radiative trapping by the street canyons, and the storage heat flux by the artificial surfaces. DA-SM2-U is tested during one simulated day above the city of Philadelphia, U.S.A. It is shown that DA-SM2-U is capable of simulating the important features observed in the urban and rural RSL, as seen in the vertical profiles of the shear stress, turbulent kinetic energy budget components, eddy diffusivity, potential air temperature, and specific humidity. Within the canopies, DA-SM2-U simulates the decrease of the wind speed inside the dense canopies, the skirting of the flow around the canopy blocks, warmer air inside the vegetation canopy than above open areas during the night and conversely during the day, and constantly warmer air inside the urban canopy. The comparison with measurements shows that the surface air temperature above rural and urban areas is better simulated by DA-SM2-U than by the `standard version' of MM5.  相似文献   

4.
An urban canopy model is developed for use in mesoscale meteorological and environmental modelling. The urban geometry is composed of simple homogeneous buildings characterized by the canyon aspect ratio (h/w) as well as the canyon vegetation characterized by the leaf aspect ratio (σ l ) and leaf area density profile. Five energy exchanging surfaces (roof, wall, road, leaf, soil) are considered in the model, and energy conservation relations are applied to each component. In addition, the temperature and specific humidity of canopy air are predicted without the assumption of thermal equilibrium. For radiative transfer within the canyon, multiple reflections for shortwave radiation and one reflection for longwave radiation are considered, while the shadowing and absorption of radiation due to the canyon vegetation are computed by using the transmissivity and the leaf area density profile function. The model is evaluated using field measurements in Vancouver, British Columbia and Marseille, France. Results show that the model quite well simulates the observations of surface temperatures, canopy air temperature and specific humidity, momentum flux, net radiation, and energy partitioning into turbulent fluxes and storage heat flux. Sensitivity tests show that the canyon vegetation has a large influence not only on surface temperatures but also on the partitioning of sensible and latent heat fluxes. In addition, the surface energy balance can be affected by soil moisture content and leaf area index as well as the fraction of vegetation. These results suggest that a proper parameterization of the canyon vegetation is prerequisite for urban modelling.  相似文献   

5.
In many land-surface models using bulk transfer (one-source) approaches, the application of radiometric surface temperature observations in energy flux computations has given mixed results. This is due in part to the non-unique relationship between the so-called aerodynamic temperature, which relates to the efficiency of heat exchange between the land surface and overlying atmosphere, and a surface temperature measurement from a thermal-infrared radiometer, which largely corresponds to a weighted soil and canopy temperature as a function of radiometer viewing angle. A number of studies over the past several years using multi-source canopy models and/or experimental data have developed simplified methods to accommodate radiometric–aerodynamic temperature differences in one-source approaches. A recent investigation related the variability in the radiometric–aerodynamic relation to solar radiation using experimental data from a variety of landscapes, while another used a multi-source canopy model combined with measurements over a wide range in vegetation density to derive a relationship based on leaf area index. In this study, simulations by a detailed multi-source soil–plant–environment model, Cupid, which considers both radiative and turbulent exchanges across the soil–canopy–air interface, are used to explore the radiometric–aerodynamic temperature relations for a semi-arid shrubland ecosystem under a range of leaf area/canopy cover, soil moisture and meteorological conditions. The simulated radiometric-aerodynamic temperatures indicate that, while solar radiation and leaf area both strongly affect the magnitude of this temperature difference, the relationships are non-unique, having significant variability depending on local conditions. These simulations also show that soil–canopy temperature differences are highly correlated with variations in the radiometric–aerodynamic temperature differences, with the slope being primarily a function of leaf area. This result suggests that two-source schemes with reliable estimates of component soil and canopy temperatures and associated resistances may be better able to accommodate variability in the radiometric–aerodynamic relation for a wider range in vegetated canopy cover conditions than is possible with one-source schemes. However, comparisons of sensible heat flux estimates with Cupid using a simplified two-source model and a one-source model accommodating variability in the radiometric-aerodynamic relation based on vegetation density gave similar scatter. On the other hand, with experimental data from the shrubland site, the two-source model generally outperformed the one-source scheme. Clearly, vegetation density/leaf area has a major effect on the radiometric–aerodynamic temperature relation and must be considered in either one-source or two-source formulations. Hence these adjusted one-source models require similar inputs as in two-source approaches, but provide as output only bulk heat fluxes; this is not as useful for monitoring vegetation conditions.  相似文献   

6.
The two-scalar covariance budget is significant within the canopy sublayer (CSL) given its role in modelling scalar flux budgets using higher-order closure principles and in estimating the segregation ratio for chemically reactive species. Despite its importance, an explicit expression describing how the two-scalar covariance is modified by inhomogeneity in the flow statistics and in the vertical variation in scalar emission or uptake rates within the canopy volume remains elusive even for passive scalars. To progress on a narrower version of this problem, an analytical solution to the two-scalar covariance budget in the CSL is proposed for the most idealized flow conditions: a stationary and planar homogeneous flow inside a uniform and dense canopy with a constant leaf area density distribution. The foliage emission (or uptake) source strengths are assumed to vary exponentially with depth while the forest floor emission is represented as a scalar flux. The analytical solution is a superposition of a homogeneous part that describes how the two-scalar covariance at the canopy top is transported and dissipated within the canopy volume, and an inhomogeneous part governed by local production mechanisms of the two-scalar covariance. The homogeneous part is primarily described by the canopy adjustment length scale, and the attenuation coefficients of the turbulent kinetic energy and the mean velocity. Conditions for which the vertical variation of the two-scalar covariance is controlled by the rapid attenuation in the mean velocity and turbulent kinetic energy profiles, vis-à-vis the vertical variation of the scalar source strength, are explicitly established. This model also demonstrates how dissimilarity in the emissions from the ground, even for the extreme binary case with one scalar turned ‘on’ and the other scalar turned ‘off’, modifies the vertical variation of the two-scalar covariance within the CSL. To assess its applicability to field conditions, the analytical model predictions were compared with observations made at two different forest types—a sparse pine forest at the Hyytiälä SMEAR II-station (in Finland) and a dense alpine hardwood forest at Lavarone (in Italy). While the model assumptions do not represent the precise canopy morphology, attenuation properties of the turbulent kinetic energy and the mean velocity, observed mixing length, and scalar source attenuation properties for these two forest types, good agreement was found between measured and modelled two scalar covariances for multiple scalars and for the triple moments at the Hyytiälä site.  相似文献   

7.
Two land surface schemes, SCAM and CSIRO9, were used to model the measured energy fluxes during the OASIS (Observations At Several Interacting Scales) field program. The measurements were taken at six sites along a 100 km rainfall gradient. Two types of simulations were conducted: (1) offline simulations forced with measured atmospheric input data at each of the six sites, and (2) regional simulations with the two land surface schemes coupled to the regional climate model DARLAM.The two land surface schemes employ two different canopy modelling concepts: in SCAM the vegetation is conceptually above the ground surface, while CSIRO9 employs the more commonly used `horizontally tiled' approach in which the vegetation cover is modelled by conceptually placing it beside bare ground. Both schemes utilize the same below-ground components (soil hydrological and thermal models) to reduce the comparison to canopy processes only. However, the ground heat flux, soil evaporation and evapotranspiration are parameterised by the two canopy treatments somewhat differently.Both canopy concepts reproduce the measured energy fluxes. SCAM has a slightly higher root-mean standard error in the model-measurement comparison for the ground heat flux. The mean surface radiative temperature simulated by SCAM is approximately 1K lower than in the CSIRO9 simulations. However, the soil and vegetation temperatures (which contribute to the radiative temperature) varied more in the CSIRO9 simulations. These larger variations are due to the absence of a representation of the aerodynamic interactions between vegetation and ground.  相似文献   

8.
The aim of this study was to develop an advanced parameterization of the snow-free land surface albedo for climate modelling describing the temporal variation of surface albedo as a function of vegetation phenology on a monthly time scale. To estimate the effect of vegetation phenology on snow-free land surface albedo, remotely sensed data products from the Moderate-Resolution Imaging Spectroradiometer (MODIS) on board the NASA Terra platform measured during 2001 to 2004 are used. The snow-free surface albedo variability is determined by the optical contrast between the vegetation canopy and the underlying soil surface. The MODIS products of the white-sky albedo for total shortwave broad bands and the fraction of absorbed photosynthetically active radiation (FPAR) are analysed to separate the vegetation canopy albedo from the underlying soil albedo. Global maps of pure soil albedo and pure vegetation albedo are derived on a 0.5° regular latitude/longitude grid, re-sampling the high-resolution information from remote sensing-measured pixel level to the model grid scale and filling up gaps from the satellite data. These global maps show that in the northern and mid-latitudes soils are mostly darker than vegetation, whereas in the lower latitudes, especially in semi-deserts, soil albedo is mostly higher than vegetation albedo. The separated soil and vegetation albedo can be applied to compute the annual surface albedo cycle from monthly varying leaf area index. This parameterization is especially designed for the land surface scheme of the regional climate model REMO and the global climate model ECHAM5, but can easily be integrated into the land surface schemes of other regional and global climate models.  相似文献   

9.
Flow physics is investigated in a two-dimensional trellised agricultural canopy to examine that architecture’s unique signature on turbulent transport. Analysis of meteorological data from an Oregon vineyard demonstrates that the canopy strongly influences the flow by channelling the mean flow into the vine-row direction regardless of the above-canopy wind direction. Additionally, other flow statistics in the canopy sub-layer show a dependance on the difference between the above-canopy wind direction and the vine-row direction. This includes an increase in the canopy displacement height and a decrease in the canopy-top shear length scale as the above-canopy flow rotates from row-parallel towards row-orthogonal. Distinct wind-direction-based variations are also observed in the components of the stress tensor, turbulent kinetic energy budget, and the energy spectra. Although spectral results suggest that sonic anemometry is insufficient for resolving all of the important scales of motion within the canopy, the energy spectra peaks still exhibit dependencies on the canopy and the wind direction. These variations demonstrate that the trellised-canopy’s effect on the flow during periods when the flow is row-aligned is similar to that seen by sparse canopies, and during periods when the flow is row-orthogonal, the effect is similar to that seen by dense canopies.  相似文献   

10.
活动层水热状况与地-气系统间能水交换直接影响着寒区生态环境、水文过程以及多年冻土的稳定性。利用唐古拉站2007年实测资料和SHAW模型,对研究点活动层土壤剖面温湿度进行了模拟。土壤温度方面,模型的纳什效率系数NSE≥0.93;水分方面,纳什效率系数的平均值为0.69,说明SHAW模型可用于多年冻土区活动层内水热动态变化的模拟研究。基于模型的输出结果,对唐古拉站活动层土壤冻融过程中的水分动态、地表能量收支的变化特征进行了分析讨论。结果表明:(1)活动层冻融过程中,土壤水分的冻结和融化响应时间随土壤深度的增加而逐渐滞后,水分迁移通量随土壤深度的增加逐渐减小;(2)地表能量平衡收支在季风活动引起的降水与活动层的冻融循环共同影响下,表现出明显的季节性变化特征。同时,通过改变SHAW模型植被输入参数中的叶面积指数,分析了植被覆盖变化对多年冻土区土壤蒸散发的影响。结果表明:植被蒸腾量、土壤蒸发量与总的蒸散发量与植被的叶面积指数呈正相关关系,而浅层土壤含水率(20 cm)则表现为负相关,当叶面积指数在-100%(裸土)~100%变化时,总蒸散发量的变化幅度为-5%~13%。  相似文献   

11.
The new Forest-Land-Atmosphere ModEl called FLAME is presented. The first-order, nonlocal turbulence closure called transilient turbulence theory (Stull, 1993) is applied to study the interactions between a forested land-surface and the atmospheric boundary layer (ABL). The transilient scheme is used for unequal vertical grid spacing and includes the effects of drag, wake turbulence, and interference to vertical mixing by plant elements. Radiation transfer within the vegetation and the equations for the energy balance at the leaf surface have been taken from Norman (1979). Among others, the model predicts profiles of air temperature, humidity and wind velocity within the ABL, sensible and latent heat fluxes from the soil and the vegetation, the stomata and aerodynamic resistances, as well as profiles of temperature and water content in the soil. Preliminary studies carried out for a cloud free day and idealized initial conditions are presented. The canopy height is 30 m within a vertical domain of 3 km. The model is able to capture some of the effects usually observed within and above forested areas, including the relative wind speed maximum in the trunk space and the counter gradient-fluxes in the lower part of the plant stand. Of special interest is the determination of the location and magnitude of the turbulent mixing between model layers, which permits one to identify the effects of large eddies transporting momentum and scalar quantities into the canopy. A comparison between model simulations and field measurements will be presented in a future paper.  相似文献   

12.
Based on the basic principles of atmospheric boundary layer and plant canopy micrometeorology, a forest underlying surface land surface physical process model and a two-dimensional atmospheric boundary layer numerical model are developed and numerical simulation experiments of biosphere and physiological processes of vegetation and soil volumetric water content have been done on land surface processes with local climate effect. The numerical simulation results are in good agreement with realistic observations, which can be used to obtain reasonable simulations for diurnal variations of canopy temperature, air temperature in canopy, ground surface temperature, and temporal and spatial distributions of potential temperature and vertical wind velocity as well as relative humidity and turbulence exchange coefficient over non-homogeneous underlying surfaces. It indicates that the model developed can be used to study the interaction between land surface process and atmospheric boundary layer over various underlying surfaces and can be extended to local climate studies. This work will settle a solid foundation for coupling climate models with the biosphere.  相似文献   

13.
The k - turbulence model is a standard of computational software packages for engineering, yet its application to canopy turbulence has not received comparable attention. This is probably due to the additional source (and/or sink) terms, whose parameterization remained uncertain. This model must include source terms for both turbulent kinetic energy (k) and the viscous dissipation rate (), to account for vegetation wake turbulence budget. In this note, we show how Kolmogorov's relation allows for an analytical solution to be calculated within the portion of a dense and homogeneous canopy where the mixing length does not vary. By substitution within model equations, this solution allows for a set of constraints on source term model coefficients to be derived.Those constraints should meet both Reynolds averaged Navier–Stokes equationsand large-eddy simulation sub-grid scale turbulence modelling requirements.Although originating from within a limited portion of the canopy, the predictedcoefficients values must be valid elsewhere in order to make the model capable of predicting the whole canopy-layer flow with a single set of constants.  相似文献   

14.
The performance of the Canadian Land Surface Scheme (CLASS) when coupled to the CCCma third generation general circulation model is evaluated in an AMIP II simulation. Our primary aim is to understand how CLASS processes moisture and to compare model estimates of moisture budget components with observations. The modelled mean annual precipitation and runoff, and their latitudinal structures, compare well with observations although some discrepancies remain in the simulation of regional values of these quantities. The amplitude and phase of the first harmonic of the precipitation annual cycle also compares well with observations although less well over regions of sparse precipitation and/or high topography. In the model, the canopy plays a major role in processing moisture at the land surface indicating the importance of vegetation in climate. The canopy intercepts a large fraction of the precipitation and provides the medium for returning much moisture back to the atmosphere as evapotranspiration. Though important locally, the snow moisture reservoir plays a relatively minor role in the global moisture budget. It acts primarily as a storage and delay mechanism with winter precipitation released to the ground reservoir on melting. The ground moisture reservoir also plays a major role and processes a similar amount of moisture as the canopy, although in a different manner. The globally averaged model runoff compares well with observation-based estimates, although the model partitioning into surface runoff and drainage does not agree particularly well with the single available observation-based estimate. How moisture is processed at the land surface serves as a basis for model intercomparison and for understanding the modelled moisture budget and its variation and changes with climate change. Only the most basic quantities (precipitation, runoff, and partitioning of runoff into surface runoff and drainage) may be compared with observation-based estimates, however, and the establishment of more complete moisture budget remains an important need.  相似文献   

15.
The vegetated urban canopy model (VUCM), which includes parametrizations of urban physical processes for artificial surfaces and vegetated areas in an integrated system, has been further developed by including physical processes associated with grass-covered surfaces in urban pervious surfaces and the photosynthesis effects of urban vegetation. Using measurements made from three urban/suburban sites during the BUBBLE field campaign in 2002, the model’s performance in modelling surface fluxes (momentum flux, net radiation, sensible and latent heat fluxes and storage heat flux) and canopy air conditions (canopy air temperature and specific humidity) was critically evaluated for the non-precipitation and the precipitation days. The observed surface fluxes at the urban/suburban sites were significantly altered by precipitation as well as urban vegetation. Especially, the storage heat at urban surfaces and underlying substrates varied drastically depending on weather conditions while having an important role in the formation of a nocturnal urban surface layer. Unlike the nighttime canopy air temperature that was largely affected by the storage-heat release, the daytime canopy air conditions were highly influenced by the vertical turbulent exchange with the overlying atmosphere. The VUCM well reproduced these observed features in surface fluxes and canopy air conditions at all sites while performing well for both the non-precipitation and the precipitation days. The newly implemented parametrizations clearly improved the model’s performance in the simulation of sensible and latent heat fluxes at the sites, more noticeably at the suburban site where the vegetated area fraction is the largest among the sites. Sensitivity analyses for model input parameters in VUCM elucidated the relative importance of the morphological, aerodynamic, hydrological and radiative/thermal properties in modelling urban surface fluxes and canopy air conditions for daytime and nighttime periods. These results suggest that the VUCM has great potential for urban atmospheric numerical modelling for a range of cities and weather conditions in addition to having a better physical basis in the representation of urban vegetated areas and associated physical processes.  相似文献   

16.
The water and energy cycle in the Tibetan Plateau is an important component of Monsoon Asia and the global energy and water cycle. Using data at a CEOP （Coordinated Enhanced Observing Period）-Tibet site, this study presents a first-order evaluation on the skill of weather forecasting from GCMs and satellites in producing precipitation and radiation estimates. The satellite data, together with the satellite leaf area index, are then integrated into a land data assimilation system （LDAS-UT） to estimate the soil moisture and surface energy budget on the Plateau. The system directly assimilates the satellite microwave brightness temperature, which is strongly affected by soil moisture but not by cloud layers, into a simple biosphere model. A major feature of this system is a dual-pass assimilation technique, which can auto-calibrate model parameters in one pass and estimate the soil moisture and energy budget in the other pass. The system outputs, including soil moisture, surface temperature, surface energy partition, and the Bowen ratio, are compared with observations, land surface models, the Global Land Data Assimilation System, and four general circulation models. The results show that this satellite data-based system has a high potential for a reliable estimation of the regional surface energy budget on the Plateau.  相似文献   

17.
利用简单生物圈模式SiB2模拟青藏高原地表能量收支   总被引：3，自引：0，他引：3  
利用简单生物圈模式SiB2模拟了西藏短草大草原安多观测站1998年7月15日至9月10日期间的地表能量分配、 地表有效辐射温度和土壤湿度。季风期, 平均冠层高度和叶面积指数大约分别为0.05 m和0.5。实验地点基本代表了夏季藏北高原大面积特征。所用资料为全球能量与水循环实验GEWEX (Global Energy and Water Cycle Experiment) 亚洲季风实验GAME (Asian Monsoon Experiment) 的西藏观测期间安多观测站微气象实地测量。采用这些资料确定SiB2所需要的参数和初始值后, 由该资料中半小时一次的太阳短波辐射、大气长波辐射、水汽压、气温、水平风速和降水驱动SiB2, 最后将模拟结果与实际测量的湍流通量、 地表温度和土壤湿度进行了对比, 进一步检验SiB2对季风期间青藏高原稀疏草原地表能量分配的模拟能力。对比结果表明: (1) 当模式低估净辐射0.2%时, 模式分别高估感热、 潜热和土壤热通量4%、 13%和8%; (2) 模式得出的地表温度偏高5%; (3) 土壤湿度估计合理。总的来说, SiB2对辐射分量模拟结果的偏差相对较小, 相关程度普遍比感热通量、 潜热通量和土壤热通量的模拟结果高。  相似文献   

18.
西北地区陆地生态系统植被状态参数业务化遥感研究   总被引：7，自引：0，他引：7  
植被指数(NDVI)和叶面积指数(LAI)是两个非常重要的陆地生态系统植被状态参数.我们首先利用最大值(MVC)合成方法使用先进遥感数据如MODIS、AVHRR3等得到旬合成植被指数(NDVI),然后利用最新的经验方法针对不同的陆地生态系统类型反演得到叶面积指数,重点研究了我国沙尘暴发生频率较高的我国西北地区植被覆被状态及其变化情况.植被指数能够反映区域,乃至全球范围植被年季状态,用于监测陆地生态系统植物光合作用活动及其变化.植被指数作为一个基础参数能够用于计算反演更高级别的陆地生态系统状态参数.叶面积指数直接影响植被的光合作用,蒸腾作用的变化和陆面过程的能量平衡状态.在沙尘暴预测研究中使用的起沙过程模型需要将叶面积指数作为一个关键输入变量,另外,绝大多数生态过程模型模拟碳、水循环时也都需要将叶面积指数作为一个非常重要的输入变量.我们总结了最新的叶面积指数经验反演方法,针对6钟不同的陆地生态系统类型应用不同经验模型计算得到了叶面积指数.  相似文献   

19.
Impact of Land Surface Heterogeneity on Mesoscale Atmospheric Dispersion   总被引：1，自引：1，他引：0  
Prior numerical modelling studies show that atmospheric dispersion is sensitive to surface heterogeneities, but past studies do not consider the impact of a realistic distribution of surface heterogeneities on mesoscale atmospheric dispersion. While these focussed on dispersion in the convective boundary layer, the present work also considers dispersion in the nocturnal boundary layer and above. Using a Lagrangian particle dispersion model (LPDM) coupled to the Eulerian Regional Atmospheric Modeling System (RAMS), the impact of topographic, vegetation, and soil moisture heterogeneities on daytime and nighttime atmospheric dispersion is examined. In addition, the sensitivity to the use of Moderate Resolution Imaging Spectroradiometer (MODIS)-derived spatial distributions of vegetation characteristics on atmospheric dispersion is also studied. The impact of vegetation and terrain heterogeneities on atmospheric dispersion is strongly modulated by soil moisture, with the nature of dispersion switching from non-Gaussian to near-Gaussian behaviour for wetter soils (fraction of saturation soil moisture content exceeding 40%). For drier soil moisture conditions, vegetation heterogeneity produces differential heating and the formation of mesoscale circulation patterns that are primarily responsible for non-Gaussian dispersion patterns. Nighttime dispersion is very sensitive to topographic, vegetation, soil moisture, and soil type heterogeneity and is distinctly non-Gaussian for heterogeneous land-surface conditions. Sensitivity studies show that soil type and vegetation heterogeneities have the most dramatic impact on atmospheric dispersion. To provide more skilful dispersion calculations, we recommend the utilisation of satellite-derived vegetation characteristics coupled with data assimilation techniques that constrain soil-vegetation-atmosphere transfer (SVAT) models to generate realistic spatial distributions of surface energy fluxes.  相似文献   

20.
利用建立的一方程模式对植被气象场和湍流场进行了模拟计算。结果表明：在植被叶面积密度最大值处，由植被叶面积产生的阻力使风速急剧减小，而后平缓接近地面风速值。Reynolds应力从植被顶部向下剧烈减小，在Z／Hc值为0．4～0．6之间衰减迅速；冠层下部风速小且切变弱，湍流未能充分发展，因而动量输送甚微。由于在植被内部环境中存在着湍流通量的辐散或辐合的现象，湍流强度从植被底部开始由下至上逐渐增强，在冠层上方则基本保持不变。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号