共查询到19条相似文献，搜索用时 203 毫秒
1.
地球内部物质、能量交换与资源和灾害 总被引：11，自引：1，他引：11
通过对凤凰山岩体接触带的变质与变形特征、显微构造及变形缩短量的计算 ,分析了凤凰山岩体侵位与接触带变形及区域变形的关系。通过接触带变质矿物变形特征的研究 ,揭示了热变质作用与侵位变形的同时性 ;接触带构造变形研究表明 ,岩体周围发育的流变褶皱、韧性剪切带、压溶缝合线等与岩体左旋上升与汽球膨胀侵位有关 ;围岩缩短量的计算结果表明 ,岩体侵位过程造成强烈的围岩缩短是一种强力侵位机制。研究表明 ,凤凰山岩体侵位是在区域NNE向水平左旋剪切应力场作用下完成的。岩体接触带变形是NNE向水平左旋剪切应力与横向推挤的侵位应力联合作用下形成的。 相似文献
2.
3.
安徽凤凰山岩体岩浆侵位过程的磁性研究 总被引：2，自引：0，他引：2
通过对安徽省铜陵地区凤凰山岩体25个采样点302件岩石样品的磁性分析,认为研究区内所得的岩石磁组构能代表岩浆侵位时的流动型磁组构,它受岩浆形成之后的构造活动的影响较小;岩浆侵位过程是准静态过程,岩浆流动性较弱、分异作用和同化混染作用强烈;岩浆侵位过程的早期可能受北北东方向的最大主压应力的控制,后期受西南方向最大主压应力场的控制;凤凰山岩体的西南部(药园山矿床所在地段)是岩体的上盘,北东部(仙人冲矿床所在地)是岩体的下盘,即凤凰山岩体向西南方向倾伏;凤凰山岩体的西南部附近地区(如来龙山等地),可能有与凤凰山岩体侵位同时期形成的小岩株,是找矿的远景区段。 相似文献
4.
华北克拉通北缘早中生代岩体侵位与地壳变形——以盘山岩体周缘变形及年代学分析为例 总被引：3，自引：0，他引：3
克拉通边缘岩浆侵位及其相关的浅层构造变形制约,不仅是深部壳幔相互作用及区域构造应力作用的浅部响应和表现,而且是从克拉通活化发展到造山作用的物质和事件记录之一。通过对燕山东段盘山花岗岩岩体周缘构造变形特征、演化过程的研究,并结合40Ar/39Ar热年代学测试和分析,提出盘山岩体侵位前、侵位时其上覆岩层的构造演化过程:三叠纪末(210-200Ma)盘山岩体侵位前,燕山中东段受南北向挤压作用形成了近东西向的马兰峪复背斜和蓟县逆冲断裂;盘山岩体侵位于先期形成的马兰峪复背斜南翼,并侵蚀了蓟县断裂;蓟县断裂的后期再次活动截切了盘山岩体的周缘向斜。岩体及同缘构造的相互关系表明,华北克拉通北缘地区的中生代早期岩浆形成于强烈的克拉通活化后一个由挤压变形向相对平静期转化的阶段。 相似文献
5.
辽宁金州地区太古宙英云闪长岩体的变形与侵位的构造环境 总被引：5，自引：0，他引：5
金州地区太古宙英云闪长岩体位于大型NW—SE向“董家沟”低角度右旋剪切带的北侧。岩体与其内部出露的花岗闪长岩侵入体均发生不同程度的变形,二者的变形构造形式协调一致。英云闪长岩体内部显示的原生变形构造、斜长石板状斑晶和角闪石、黑云母颗粒具空间取向,以及拉长斜长石颗粒重结晶集合体的双晶具优选定向等特征,表明是由岩浆流动引起的。两侵入体是同在围岩韧性变形(带)作用的构造环境控制下,先后侵位、变形形成的古深成侵入体。 相似文献
6.
广西姑婆山岩体侵位构造及侵位机制研究 总被引：4，自引：0，他引：4
欧阳成甫 《大地构造与成矿学》2002,26(3):331-334
本文从环形构造和线性构造特征、侵位断裂—岩墙、岩脉、定向构造和挤压变形构造、外接触带的褶皱构造、岩体的应变测量等方面,系统地对姑婆山花岗岩的侵位构造进行了研究,并得出了该岩体属“气球膨胀”的侵位机制。 相似文献
7.
崔召花岗岩岩体的磁组构特征及其构造侵位意义 总被引：6，自引：0，他引：6
侵入岩体的磁组构形成于岩浆运移侵位、固化的过程中,必然保留了岩体的构造侵位过程的信息.以玲珑复式花岗岩岩基南部的崔召岩体为例,对岩体磁组构的详细研究,可以揭示岩浆运移,就位和变形等一系列特征.崔召岩体的磁线理不发育,反映岩体侵位速度慢,岩体边部磁面理比内部发育,并且岩体边缘磁各向异性度P值明显大于岩体内部,磁线理倾角小,反映岩体侵位过程中侧向挤压作用比较强烈,具有类似于气球膨胀作用的侵位机制.并且此磁组构特征再没有受到后期构造热事件的影响. 相似文献
8.
铜陵凤凰山岩体SHRIMP锆石U-Pb年龄与构造变形及其对岩体侵位动力学背景的制约 总被引：31，自引：0，他引：31
地球动力环境对岩浆来源和侵位机制具有重要的控制作用.铜陵矿集区中生代中酸性侵入岩和大规模成矿作用有密切关系.凤凰山岩体为凤凰山矿田的主要组成部分, 主要岩石类型为花岗闪长岩、石英二长闪长岩.根据精确锆石SHRIMP测年结果, 凤凰山岩体206Pb/238U年龄为(144.2±2.3) Ma, 是晚侏罗世形成的一个典型岩体, 和铜陵矿集区主要成矿岩体的形成时代一致.接触带构造变形特征显示岩体侵位受控于区域左旋剪切应力场作用.内部构造变形特征表明凤凰山岩体在深部主要为左旋螺旋式强力上升, 浅部为气球膨胀式主动侵位.岩体形成时代及构造变形特征表现出晚侏罗世铜陵矿集区和成矿有关的侵入岩系列的形成可能和古太平洋板块的向北斜向俯冲所导致的左旋剪切应力场有关. 相似文献
9.
广西海洋山花岗岩体侵位构造特征 总被引：1，自引：0，他引：1
花岗岩是大陆地壳的重要组成部分,是地球动力学演化的示踪剂。花岗岩体侵位构造的研究对于揭示花岗岩体的变形历史和侵位机制具有重要的科学价值。本文研究了海洋山花岗岩体的内部构造、与岩浆侵位应力有的围岩构造及热接触变质带特征,探讨了岩体和围岩的应变状态。研究发现,从岩浆侵位到冷凝固结,海洋山花岗岩体经历了液态流动、塑性变形和“半固态”冷凝阶段的演化。岩体各单元的应变类型分别是单轴压扁、平面应变、单轴压缩, 相似文献
10.
为了分析望云山复式花岗岩体侵位时的动力学状态，对该岩体进行了岩石磁组构参数测定，磁化率的变化特征反映了望云山得式岩体侵位过程中构造环境的变化和单元岩石的暗色矿物组成及其性程度的高低；磁面理的产状与岩体形态和岩石单元分布相吻合，清晰地反映了不同构造单元岩浆侵位方式；磁线理指示岩体的侵位中心，线理表现形式不一，标示侵位方式与受构造应力的不同；晚期岩浆对早期岩浆中的磁线理有一定的改造作用，磁线理方向基本上反映了岩浆原始流动状态；从磁化率椭球参数可以看出岩浆侵位的应变状态；岩浆应力场分布体现了岩浆侵位方式及其所处构造环境，岩体岩石磁组构参数佐证了区域构造,围岩构造及岩体内部其他构造所反映的岩体侵位机制。 相似文献
11.
北京西山房山岩体西北部强变形带的成因新解 总被引：2，自引：1，他引：1
北京西山房山岩体西北缘不对称发育一条弧形塑性强变形带,前人根据岩体东南部组构缓倾和岩体内部强应变分布特征提出岩浆斜向底辟侵位模式(王人镜等,1990;张吉顺和李志中,1990)。本文在前人研究的基础上,对房山岩体的组构进行系统观测,研究了西北缘固态塑性强变形带地质特征,着重探讨了岩体侵位时围岩热结构状态。文章认为岩浆同侵位固态塑性强变形带的形成需要早期岩浆进入准固态-固态和后期岩浆膨胀动力这两个必要条件。房山岩体西北部的强变形带是由于岩体侵位时西部围岩的温度较低,岩浆较早进入准固态-固态,后期岩浆侵位时膨胀动力双重因素造成的,提出了围岩热结构状态是房山岩体不对称的固态塑性强变形带的控制因素,而不是岩浆斜向底辟侵位的结果。这一研究成果不仅较合理地解释了房山岩体强变形带不对称发育特征,而且对研究同类花岗质岩体的定位机制有一定启示意义。 相似文献
12.
Study of the Emplacement Mechanism of the Fenghuangshan Granite Pluton and Related Cu-Au Mineralization in Tongling, Anhui Province 总被引：4，自引：2，他引：2
WU Ganguo ZHANG D LI Dongxu ZHANG Xiangxin SHAO Yongjun ZANG Wenshuan WANG QunfengKey Laboratory of Lithospheric Tectonics Exploration China University of Geosciences 《《地质学报》英文版》2004,78(2):492-502
The Fenghuangshan Pluton is located in the Tongling polymineral-cluster district in the middle-lower section of the Yangtze metallogenic belt. In tectonic terms, it is in the middle of the Guichi-Fanchang faulted fold bundle of the lower Yangtze Platform fold belt between the Dabie Orogenic Belt and the Jiangnan Massif. Analyses of the structural deformation characteristics of both the contact zone and the interior of the pluton are used to explain its emplacement mechanism. The foliation and lineation of the pluton, consisting of the oriented distribution of dark minerals and xenoliths, mainly concentrate along the margin of the pluton. Toward the center of the pluton, the foliation structure becomes weak, showing intense compression formation at the margin, and reflecting the conformable intrusion of the pluton. The relatively gentle lineation is evidence of a rotatory emplacement mechanism. Relatively steep marginal foliation reflects compression expanding. Affected by the thermal power of the pluton, 相似文献
13.
Structural mapping of the Pasupugallu pluton, an elliptical intrusive gabbro-anorthosite body, emplaced into the western contact zone between the Eastern Ghats Mobile Belt and the Archaean East Dharwar Craton, along the east coast of India, reveals concentric, helicoidal and inward dipping magmatic and/or tectonic foliations. We identify a <1 km-wide structural aureole characterized by pronounced deflection of regional structures into margin parallel direction, mylonitic foliations with S-C fabrics, sigmoidal clasts, moderately plunging stretching lineations, non-cylindrical intrafolial folds, and stretched elliptical mafic enclaves in the aureole rocks. Our results suggest that the pluton emplacement is syn-tectonic with respect to the regional ductile deformation associated with the terrane boundary shear zone at the western margin of the Eastern Ghats. We present a tectonic model for the emplacement of the pluton invoking shear-related ductile deformation, rotation and a minor component of lateral expansion of magma. The intrusive activity (1450-800 Ma) along the western margin of the Eastern Ghats can be correlated with the significant event of recurring mafic, alkaline and granitic magmatism throughout the global Grenvillian orogens associated with the continent-continent collision tectonics possibly related to the amalgamation and the breakup of the supercontinent Rodinia. 相似文献
14.
Emplacement Mechanism of the Akebasitao Pluton: Implications for Regional Tectonic Evolution of West Junggar, NW China 总被引：1，自引：0，他引：1
ZHANG Pan WANG Guocan LI Yongtao ZHANG Shengye PENG Chao ZHAO Hongwei ZHA Yanhong 《《地质学报》英文版》2017,91(3):857-874
Late Carboniferous to Early Permian A-type granites are extensively distributed throughout the West Junggar region, NW China, and the Akebasitao pluton is extremely distinguished among these plutons. In this paper, we reported new anisotropy of magnetic susceptible (AMS) data combine with detailed field study and audio magnetotelluric (AMT) sounding to assess the three-dimensional shape and magmatic emplacement mechanism of the Akebasitao pluton. The geological features and the AMT sounding indicate that the pluton had a slightly oblique movement of magma from northwest to southeast, which was most likely to correspond to an asymmetrical torch with a laccolith-shaped upper part, and a lower part formed by sub-vertical “root” that was located within its northwestern part, probably controlled by the NE-trending Anqi fault. The AMS fabrics of all the specimens reveal a low Pj value (mean of 1.02) and a low T value (mean of ?0.024), suggesting that the deformation of the AMS ellipsoid is relatively weak. The specimens exhibit both oblate and prolate shapes of the AMS ellipsoid. Magnetic lineations and foliations are randomly distributed throughout the pluton without any preferred orientation. These AMS patterns indicate that the pluton formed in a relatively stable structural environment with no regional extrusion. Therefore, we propose a complex emplacement process in which the magmas reached the shallower crust levels via deep-faults and subsequently occupied the room created by doming, accompanied by stoping near the pluton roof. Additionally, the regional tectonic setting was relatively stable during the emplacement of the Akebasitao pluton, indicating the termination of compressional orogeny during the late Late Carboniferous in the West Junggar region. This conclusion perfectly coincides with the regional tectonic paleogeography, magmatic system, and paleostress field. 相似文献
15.
Christoph Dobmeier 《International Journal of Earth Sciences》2006,95(4):543-555
A study of the 933±32-Ma-old Bolangir massif-type anorthosite complex (Eastern Ghats Province, India) yielded strong evidence for anorthosite emplacement during regional shortening, and thereby new insights in massif-type anorthosite formation. Several lines of evidence strongly suggest synchronism of plutonism and regional deformation. First, structures in the country rocks, which imply N–S-directed shortening accompanied by E–W extension, are mirrored by a E–W trending post-magmatic foliation and N–S trending shear zones in the anorthosite complex. Near the intrusion, the foliation in the country rocks becomes parallel to the contact and an internal marginal foliation, and foliation triple points occur in the country rocks. Second, synshortening dikes inside and outside the anorthosite complex are filled with pluton-related melts. Third, ferrodiorites, which are considered late-stage differentiates of the anorthositic pluton, concentrate in tectonic voids at the pluton margin. Some of these occurrences have been affected by the last increments of the regional deformation, but others transect the same structures. Ascent mechanism and significance of the adjacent terrane boundary of the Eastern Ghats Belt for ascent and emplacement of the Bolangir anorthosite complex are discussed. The results of this study imply that emplacement of Proterozoic massif-type anorthosite is not restricted to extensional settings. 相似文献
16.
The role of regional extension on the rise and emplacement of granites in the crust is still debated. Pluton ascent and emplacement widely occurred in Tuscany (Italy) since late Miocene during the post-orogenic collapse of the inner Apennines, and are presently occurring in the geothermal areas of Amiata and Larderello. Tuscany offers a preferred test site to study the role of regional extension on pluton ascent and emplacement at different crustal levels. Ductile extension enhanced the segregation and ascent of granitic melts in the lower crust, controlling pluton emplacement in correspondence with the brittle–ductile transition. In the brittle crust, magma ascent occurred through subvertical faults and fractures compatible with the regional extension direction; pluton emplacement mainly occurred by means of roof lifting. The case of Tuscany suggests that the extensional structures enhance melt segregation and ascent in the ductile crust, but are not efficient alone to provide a pathway for the ascent of granitic magmas in the brittle-extending crust. The estimated magmatic strain rates due to pluton emplacement in the geothermal areas are much larger than the regional tectonic strain rates. This suggests that regional tectonics did not control magma emplacement in the brittle crust and explains why nontectonic processes (roof lifting) accommodated the space required for pluton emplacement. 相似文献
17.
内蒙古苏尼特左旗早白垩世宝德尔花岗岩伸展穹隆的确定及其地质意义 总被引：3，自引：1，他引：2
内蒙古宝德尔穹隆是发育在苏尼特左旗中蒙边境地区的不对称同构造伸展穹隆。该穹隆由内向外由核部早白垩世花岗岩、边缘韧性剪切带和脆性拆离断层组成,上盘为未变形的早二叠世花岗闪长岩、泥盆系片岩和早白垩世盆地,韧性剪切带和拆离断层仅发育在穹隆西南部。区域构造解析和显微构造分析表明,岩体侵位和韧性剪切带形成于同一构造应力场,指示上盘统一向NW方向剪切,变形程度由未变形的岩体核部向外侧逐渐增强,面理的形成与岩体的侵位和隆升过程密切相关。因此,该穹隆和东北亚其他岩浆穹隆相似,是不对称的花岗岩穹隆,反映了区域伸展拆离环境下侵位的同构造花岗岩穹隆的特点。 相似文献
18.
Abstract Petrological study of highly strained carbonate and pelitic rocks within the contact aureole surrounding the western part of the Papoose Flat pluton yields thermal profiles (plots of metamorphic temperature versus distance) across the aureole that show temperature gradients which are relatively flat and narrow (<100m). The gradients occur close to the contact and indicate a slight decrease in temperature from 500–550°C at the pluton/wall rock contact to 450–500°C at the outer margin of the aureole. One thermal profile across low-strain metasedimentary rocks located in the southern part of the aureole shows that thermal effects from emplacement extend no further than 600 m from the contact. Coexistence of andalusite and cordierite in pelitic rocks of the aureole constrain pressures to <4 kbar. Thermal modelling using an analytical solution of the conductive heat flow equation for a rectangular-shaped pluton reproduces the observed thermal maxima and profile shape. Conductive rather than convective cooling also is supported by isotopic and field evidence for limited fluid flow along the strongly deformed margin of the pluton. Simple thermal models coupled with observed high-temperature deformation features and a measured 90% attenuation of stratigraphic units in the plastically deformed western part of the pluton's aureole indicate that strain rates may have been of the order of 10-12 s-1. Evidence for episodic heating, such as two distinct generations of andalusite growth in pelites from the aureole, alternatively may indicate a longer heating event and, therefore, slower strain rates. Thermal models also indicate that parts of the pluton still may have been above the solidus during deformation of the pluton margin and aureole. 相似文献
19.
We present centrifuge experiments to study the surface deformation induced by shallow pluton emplacement in a rheologically stratified crust. Sand simulates the topmost brittle crust; plastilina and denser silicone represent more and less competent crustal portions, respectively; lighter silicone simulates a buoyant intrusion. In the models, density differences affect the rate of intrusion but not their evolution or shape, whereas viscosity and strength stratifications control both the shape and rate of the intrusions. With a higher viscosity contrast (102–4) between the intrusion and the embedding media, the rise of the lighter silicone induces a laccolith-like intrusion, responsible for doming and thinning of the overburden; an apical depression may form, inducing silicone extrusion. Conversely, with a lower (101) viscosity contrast, the overburden and the intrusion exhibit a lens-shaped form, with a broad central depression bordered by an upward flexure towards the periphery. A sag in the floor of the intrusion is commonly observed; no silicone extrusion occurred. The intrusion is a hybrid between a laccolith and a lopolith. The comparison with nature (1) confirms roof uplift as an important means of accommodating space during pluton emplacement and (2) suggests that, where roof uplift plays a major role, pluton emplacement can induce a well-correlated sequence of events at surface: doming, the development of a depression and extrusion. 相似文献