共查询到20条相似文献，搜索用时 796 毫秒
1.
The laminated lacustrine sediments deposited in the last glacial Lake Lisan represent annual deposits of primary aragonite and silty detritus that reflect the annual supply of bicarbonate‐bearing freshwater to the lake. A varve‐counting curve was constructed for the time interval of ca. 17.4–22 cal. ka BP based on aragonite U/Th, and atmospheric radiocarbon ages of organic debris recovered from the studied section. Radiocarbon in the primary (evaporitic) aragonite comprises both atmospheric and old carbon (reflecting the reservoir age). The aragonite reservoir ages were determined by comparing the aragonite radiocarbon dates to the varve counting curve, and are found to lie in the range 1900–600 a and display a continuous decline. This opens the possibility for high (annual) resolution monitoring of the reservoir age, similar in quality to tree ring counting, during the upper part of Marine Isotope Stage (MIS) 2. Our work also demonstrates that a ‘uniform’ reservoir age correction is inappropriate when determining the chronology of short‐term climate events in lacustrine environments. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
2.
Mounds that have formed around spring vents occur in a variety of environmental settings, many at sites generally difficult or inaccessible for sampling. In contrast, over 500 tufa mounds occur in the dry bed of Searles Lake, California. The mounds range from minor features to 45 m in height; most are 5 to 12 m high. These mounds, composed of calcite and aragonite, formed associated with spring vents in the Pleistocene lake bottom. Thus, analyses of these mounds in Searles Lake provide a model with regard to the origin and architecture of tufa mounds. The mounds consist of four distinctive tufa facies. The initial deposits consist of porous tufa, including the innermost (porous 1) and the outermost (porous 2) deposits, followed by nodular tufa, then columnar tufa, and laminated crusts. There are two simple sequences of tufa deposition. The first sequence is from porous 1 to nodular to laminated crusts and, finally, to porous 2. A second sequence consists of: porous 1 to columnar to laminated crusts and, lastly, to porous 2. Facies changes are a response to changes in environmental conditions from deep water (porous 1 facies) to an essentially dry lake phase (during and after the formation of laminated crusts facies), to deep water (porous 2 facies) and, at the present time, totally dry. The primary constituents that comprise the tufa deposits include thin laminae, pisoids, spherulites, peloids and stromatolite‐like crusts. On the microscopic scale, these constituents dominantly make up nano‐spheres, micro‐rods and rod‐like crystals, as well as other calcified bodies. These constituents are interpreted to be the calcified remains of bacterial bodies. These findings suggest that microbial participation in the construct of other mounds should be a major concern of investigation, both for terrestrial and extraterrestrial spring‐fed mounds. 相似文献
3.
The pyroclastic deposits of the Minoan eruption (ca 3600 yr bp ) in Santorini contain abundant xenoliths. Most of these deposits are calcareous blocks of laminated‐botryoidal, stromatolite‐like buildups that formed in the shallow waters of the flooded pre‐Minoan caldera; they consist of (i) light laminae, of fibrous aragonite arranged perpendicular to layering, and (ii) dark laminae, with calcified filaments of probable biological origin. These microstructures are absent in the light laminae, suggesting a predominant inorganic precipitation of aragonite on substrates probably colonized by microbes. Internal cavities contain loose skeletal grains (molluscs, ostracods, foraminifera and diatoms) that comprise taxa typical of shallow marine and/or lagoon environments. Most of these forms are typical of warm water environments, although no typical taxa from hydrothermal vents have been observed. Past gasohydrothermal venting is recorded by the occurrence of barite, pyrolusite and pyrite traces. The most striking features of the stable isotopic data set are: (i) an overall wide range in δ13CPDB (0·16 to 12·97‰) with a narrower variation for δ18OPDB (?0·23 to 4·33‰); and (ii) a relatively uniform isotopic composition for the fibrous aragonite (δ13C = 12·40 ± 0·43‰ and δ18O = 2·42 ± 0·77‰, n = 21). The δ13C and δ18O values from molluscs and ostracods display a covariant trend, which reflects a mixing between sea water and a fluid influenced by volcano‐hydrothermal activity. Accordingly, 87Sr/86Sr from the studied carbonates (0·708758 to 0·709011 in fibrous aragonite and 0·708920 to 0·708991 in molluscs) suggests that the aragonite buildups developed in sea water under the influence of a hydrothermal/volcanic source. Significant differences in trace elements have been detected between the fibrous aragonite and modern marine aragonite cements. The caldera water from which the fibrous aragonite crusts formed received an input from a volcano‐hydrothermal system, probably producing diffuse venting of volcanogenic CO2 gas and of a fluid enriched in Ca, Mn and Ba, and depleted in Mg and probably in Sr. 相似文献
4.
Small (5–30 μm) aggregates of aragonite needles occur in calcite crystal crusts of present day hot water slope travertines at Rapolano Terme in Tuscany, Italy. The aggregates are mainly concentrated in irregular, wispy and dark laminae which cross-cut calcite crystal feathers to create a pervasive millimetre scale banded appearance in the deposit; they also occur less commonly scattered irregularly through the calcite layers. The aragonite needle aggregates are in the form of crosses, fascicles (sheaf shaped bundles, or dumbbell shaped), rosettes and spherulites. Locally, irregular masses of needles also occur. The fascicles, rosettes and spherulites have hollow centres which resemble microbial components (?fungal spores, bacterial colonies and pollen), suggesting that the aragonite crystals are biotically nucleated. The lamination is interpreted to reflect diurnal control. Stimulation of microbial activity during daylight concentrates cells in laminae and promotes aragonite calcification. Calcite feather crystals, although traversed by the aragonite aggregate laminae, have a clear appearance under the light microscope. They form more or less continuously through the diurnal cycle by abiotic precipitation. The constant association of aragonite with organic nuclei, irrespective of whether the latter are in laminae or scattered through the calcite layers, supports a biotic control on aragonite formation. Lamination in Pleistocene travertines is superficially similar to that in the present day deposits, but is diagenetically altered. In the Pleistocene deposits, the calcite feathers appear dark under the light microscope and the aragonite aggregates, where they are not altered to dark calcite, are dissolved, together with parts of the adjacent spar calcite, and therefore appear light coloured. 相似文献
5.
Stromatolite reef crusts,Early Cretaceous,Spain: bacterial origin of in situ‐precipitated peloid microspar? 总被引：2，自引：0，他引：2
Peloidal crusts are significant components of Early Cretaceous (Aptian) reef carbonates in eastern Spain. The crusts form steep-sided laminated deposits on coral and other skeletal surfaces. Their microfabric consists almost entirely of silt-sized peloids in fenestral microspar matrix. This microfabric contrasts with more poorly sorted and generally finer grained detrital wackestone–packstone fabrics of the adjacent reef matrix. Scarcity of incorporated grains indicates that the crusts did not trap many particles. It is proposed that the crusts are stromatolites and that peloids and inter-peloid space were created concurrently by bacterial degradation of organic matter. As they developed, inter-peloid voids were protected from infiltration of extraneous sediment by the organic-rich exterior surface of the stromatolite. Even spacing of the peloids within microspar may reflect self-organization of bacterial colonies in the decaying organic matrix. Compressed and partly amalgamated peloids marginal to burrows in the stromatolites suggest that the peloid fabrics were initially only partially lithified. The grainstone-like peloid fabric is therefore interpreted as having formed in situ by very early diagenetic processes driven by heterotrophic bacteria. 相似文献
6.
Ancient carbonate buildups may contain extraordinarily large amounts of early diagenetic precipitates. In some, host rock lamination may be traced into inclusion bands within the 'cement' crystals, suggesting that the crystals are replacive. By analogy with a Pleistocene speleothem from the Sorrento Peninsula, however, these relationships can be explained differently. In the speleothem, large, repeatedly split and dendritic calcite crystals occur within a laminated carbonate. Lamination consists of sub-mm alternations of micrite and microspar. Micritic laminae pass laterally into inclusion-rich growth bands in the dendritic calcite crystals, and have replaced an aragonitic cement, whereas the microspar laminae were primary calcite cements. Three types of inclusion-rich bands occur in the dendrite crystals: (1) with aragonite relicts, (2) 'ribbon calcite' and (3) with oriented micropores. When aragonite precipitated, the calcite dendrite branches were unable to keep growing as single crystals and split into crystallites (separated by micropores, some forming ribbon calcite), whereas during episodes of calcite lamina precipitation, the larger crystals were regenerated by crystallite coalescence. Calcite crystals are primary: they did not replace a micritic precursor. By analogy with the Italian speleothem, some ancient reefal sparry carbonates may not be replacements of earlier laminated sediments, but may have grown concurrently with them. It is also probable that some ancient laminated sediments were instead sea-floor precipitates, and that stromatolites containing cross-cutting crystal fabrics, and the alternating micrite-microspar laminae typical of Archaeolithoporella , could be largely abiotic crystal growths. 相似文献
7.
High energy coralgal-stromatolite frameworks from Holocene reefs (Tahiti, French Polynesia) 总被引：6，自引：0，他引：6
Drill cores from Holocene reefs on Tahiti (French Polynesia) reveal a framework composed of massive branching acroporids encrusted by coralline algae associated with sessile vermetid gastropods and arborescent foraminifers. Laminated micritic crusts form coatings over coral branches or, more commonly, over related encrusting organisms throughout the cored reef sections; these crusts appear as a major structural and volumetric component of the reef framework. The microbial nature of these micritic crusts is inferred from their typical organic growth forms and geometry, the occurrence of microbial remains and stable isotope measurements. The reef communities accumulated at depths less than 5 m below mean sea level in a high energy environment throughout vertical growth from 7140 ± 170 yr bp to the present. The nature of the involved benthic communities, stable isotope data and high calcification rates of microbially encrusted corals strongly suggest that local environmental conditions have been optimal for reef development for the last 7000 years. The causes of the predominance of microbial communities over actual encrusters (red algae, foraminifers) remain problematic and could be related to short term fluctuations in ecological parameters. Microbial micritic crusts seemingly played a prominent role in protecting the coralgal colonies from bioeroders and grazers and, possibly, in strengthening the framework, due to rapid lithification. The record of similar microbial crusts in other Quaternary reef tracts suggests that microbial communities may have played a more prominent role in Quaternary reefs than presently recognized. 相似文献
8.
Reef Fabrics, biotic crusts and syndepositional cements of the Latemar reef margin (Middle Triassic), northern Italy 总被引：3，自引：0，他引：3
M. T. HARRIS 《Sedimentology》1993,40(3):383-401
The Latemar reef buildup of the central Dolomites (northern Italy) provides a rare opportunity to examine an in-place Middle Triassic (Upper Anisian to Lower Ladinian) platform margin that is not strongly deformed or dolomitized. The margin lies between the flat lying platform interior and steeply dipping foreslope clinoforms. Across this transition, the depositional profile relates directly to a consistent lateral facies pattern: (1) restricted-biota grainstone of the platform interior, (2) ‘Tubiphytes’-rich boundstone and (3) diverse-biota grainstone that grades into (4) foreslope breccia beds. The boundstone and diverse-biota grainstone facies comprise the platform margin. The boundstone facies consists of a framework of small (< 10 cm) skeletal remains (< 10% by volume) with associated biotic crusts, internal sediments and syndepositional cements. Crusts and cements constitute most of the rock volume and created the boundstone fabric. Biotic crusts exhibit gravity-defying geometries and range from a light grey, ‘structure grumeleuse’ rind to dark grey, micritic laminae. Both cements and biotic crusts occur as redeposited talus in the foreslope talus deposits, indicating a syndepositional origin. The diverse-biota grainstone facies primarily consists of skeletal-peloidal grainstone with a diverse open marine biotic assemblage, in contrast to the restricted biota grainstones of the platform interior that have a low diversity, restricted marine biota. Metre scale hexacoral boundstone and centimetre-scale sponge boundstone and microbial boundstone occur as isolated patches (tens to hundreds of metres apart) within the diverse-biota grainstone facies. The depositional profile, facies zonation and biotic constituents all indicate that the Latemar buildup had a shallow water reef margin, in contrast to previous interpretations that these were upper slope reefs. The syndepositional biotic crusts and inorganic cementation played key roles in stabilizing the boundstone fabric to form a wave-resistant reef fabric. 相似文献
9.
The Maastrichtian chalk of the southern Central Graben, Danish North Sea, is a homogeneous pure white coccolithic chalk mudstone deposited in a deep epeiric shelf sea, which covered large parts of northern Europe. The sediment displays a pronounced cyclicity marked by decimetre‐thick bioturbated beds alternating with slightly thinner non‐bioturbated, mainly laminated beds. The laminated half‐cycles consist of alternating millimetre‐thick, graded, high‐porosity laminae and non‐graded, low‐porosity laminae. The cyclicity has been interpreted previously as caused by periods of slow background sedimentation and bioturbation interrupted by periods of rapid deposition of laminated beds, with the latter reflecting random and local resedimentation processes. Based on textural and structural analysis, the millimetre‐scale, non‐graded laminae are interpreted as having been deposited directly from pelagic rain of pelleted coccoliths representing the primary production. The graded laminae were deposited from small‐volume, low‐density turbidity currents and suspension clouds. The sedimentation rates of the cyclical chalk are similar to those known elsewhere, and the lamination is interpreted as having been preserved from destruction through bioturbation by anoxic conditions at the seafloor. Bioturbated–laminated cycles are thus formed by slow sedimentation during alternating seafloor redox conditions probably on a Milankovitch scale. A direct implication of this interpretation is that the cycles are areally widespread, probably extending throughout the southern Central Graben area and may be useful for correlation and high‐resolution cyclostratigraphy in the chalk fields of the Danish North sea. If the laminated half‐cycles represent a few rapid resedimentation events, with a high sedimentation rate as suggested by most workers, then the sediment would not be truly cyclic, but would represent event sedimentation within a pelagic background represented by the bioturbated beds. In this case, the cycles would have very limited potential for correlation. 相似文献
10.
Manganese-rich encrustations along the modern shoreline of the Dead Sea are of three kinds: (a) Black laminae, ranging in thickness from 0.1 mm to 4 mm, alternating with aragonite layers which form continous hard crusts on pebbles and boulders (b) Thin black laminae in laminated muds found in very shallow waters. (c) Thin black laminae, alternating with aragonite and gypsum, surrounding partially submerged tree trunks.
No identifiable X-ray diffraction pattern was obtained in the black layers. SEM studies revealed discrete, shapeless manganese-rich aggregates embedded in an aragonitic matrix. The black laminae consist of approximately 75% aragonite, 15% insoluble residue (mostly quartz), and about 10% manganese-rich fraction. Chemical analyses of the isolated manganese-rich fraction gave up to 50% manganese, and less than 1% iron.
Profiles of dissolved manganese in interstitial water show a two-fold enrichment of manganese as compared with the overlying water, with a particularly high concentration (18 mg/l) at the sediment—water interface. This is interpreted to be due to release of manganese from solid phases in the reduced sediments, and upward migration of dissolved manganese in interstitial water, and oxidation to insoluble tetravalent manganese at the interface with the oxygen-containing water.
The manganese-rich crusts were formed below the water table and were deposited no later than 350 years and possibly sooner. 相似文献
11.
Depositional system and palaeoclimatic interpretations of Middle to Late Pleistocene travertines: Kocabaş, Denizli,south‐west Turkey 
下载免费PDF全文
下载免费PDF全文 Travertine deposits in western Turkey are very well‐exposed in the area of Kocaba?, in the eastern part of the Denizli Basin. The palaeoclimatic significance of these travertines is discussed using U/Th dates, stable isotope data and palynological evidence. The Kocaba? travertine occurrences are characterized by successions of depositional terraces associated with palaeosols and karstic features. The travertines have been classified into eight lithotypes and one erosional horizon, namely: laminated, coated bubble, reed, paper‐thin raft, intraclasts, micritic travertine with gastropods, extra‐formational pebbles and a palaeosol layer. The analysed travertines mostly formed between 181 ka and 80 ka (Middle to Late Pleistocene) during a series of climatic changes including glacial and interglacial intervals; their δ13C and δ18O values indicate that the depositional waters were mainly of basinal thermal origin, occasionally mixed with surficial meteoric water. Palynological results obtained from the palaeosols showed an abundance of non‐arboreal percentage and xerophytic plants (Oleaceae and Quercus evergreen type) indicating that a drought occurred. Marine Isotope Stage 6 is represented by grassland species but Marine Isotope Stage 5 is represented by Pinaceae–Pinus and Abies, Quercus and Oleaceae. Uranium/thorium analyses of the Kocaba? travertines show that deposition began in Marine Isotope Stage 6 (glacial) and continued to Marine Isotope Stage 4 (glacial), but mostly occurred in Marine Isotope Stage 5 (interglacial). The travertine deposition continued to ca 80 ka in the south‐west of the study area, in one particular depression depositional system. Palaeoenvironmental indicators suggest that the travertine depositional evolution was probably controlled by fault‐related movements that influenced groundwater flow. Good correlation of the stable isotope values and dates of deposition of the travertines and palynological data of palaeosols in the Kocaba? travertines serve as a starting point for further palaeoclimate studies in south‐west Turkey. Additionally, the study can be compared with other regional palaeoclimate archives. 相似文献
12.
Late Quaternary barrier and fringing reef development of Bora Bora (Society Islands,south Pacific): First subsurface data from the Darwin‐type barrier‐reef system 下载免费PDF全文
下载免费PDF全文 Eberhard Gischler J. Harold Hudson Marc Humblet Juan C. Braga Anton Eisenhauer Anja Isaack Flavio S. Anselmetti Gilbert F. Camoin 《Sedimentology》2016,63(6):1522-1549
The universally known subsidence theory of Darwin, based on Bora Bora as a model, was developed without information from the subsurface. To evaluate the influence of environmental factors on reef development, two traverses with three cores, each on the barrier and the fringing reefs of Bora Bora, were drilled and 34 uranium‐series dates obtained and subsequently analysed. Sea‐level rise and, to a lesser degree, subsidence were crucial for Holocene reef development in that they have created accommodation space and controlled reef architecture. Antecedent topography played a role as well, because the Holocene barrier reef is located on a Pleistocene barrier reef forming a topographic high. The pedestal of the fringing reef was Pleistocene soil and basalt. Barrier and fringing reefs developed contemporaneously during the Holocene. The occurrence of five coralgal assemblages indicates an upcore increase in wave energy. Age–depth plots suggest that barrier and fringing reefs have prograded during the Holocene. The Holocene fringing reef is up to 20 m thick and comprises coralgal and microbial reef sections and abundant unconsolidated sediment. Fringing reef growth started 8780 ± 50 yr bp ; accretion rates average 5·65 m kyr?1. The barrier reef consists of >30 m thick Holocene coralgal and microbial successions. Holocene barrier‐reef growth began 10 030 ± 50 yr bp and accretion rates average 6·15 m kyr?1. The underlying Pleistocene reef formed 116 900 ± 1100 yr bp , i.e. during marine isotope stage 5e. Based on Pleistocene age, depth and coralgal palaeobathymetry, the subsidence rate of Bora Bora was estimated to be 0·05 to 0·14 m kyr?1. In addition to subsidence, reef development on shorter timescales like in the late Pleistocene and Holocene has been driven by glacioeustatic sea‐level changes causing alternations of periods of flooding and subaerial exposure. Comparisons with other oceanic barrier‐reef systems in Tahiti and Mayotte exhibit more differences than similarities. 相似文献
13.
Brick-like texture and radial rays in Triassic pisolites of Lombardy,Italy: A clue to distinguish ancient aragonitic pisolites 总被引：1，自引：0，他引：1
Triassic pisolites from the Calcare Rosso, Lombardy, Italy, were formed in a hypersaline vadose environment and now show alternating dolomite and calcite laminae. The calcite consists either of microsparite laminae with a brick-like fabric, or of a mass of mosaic crystals with the external form of square-ended rays.These features suggest that the original laminae and rays were aragonitic, like those of the Holocene supratidal pisolites of the Persian Gulf, which consist of alternating laminae of unoriented nannomicrite with Mg-rich mucilaginous material, and aragonitic fibers with radial orientation separated by mucilaginous films. It is suggested that the transformation to brick-like and ray textures passed through the following diagenetic path: (1) original formation of fibrous aragonite laminae; (2) local aggrading recrystallization of aragonite fibers to large square-ended rays during hypersaline phases; (3) dolomitization of Mg-rich mucilaginous nannomicrite laminae during hyposaline phases; (4) inversion of the aragonite fibers and rays to calcite on a piece-by piece basis that preserved the original textural details, when the pH or Mg/Ca ratio dropped.The brick-like and ray fabrics have not been found in laminae of continental freshwater pisolites because these were deposited as equant and stable crystals of low-Mg calcite. These textures consequently make it possible to establish the chemistry of the depositional and early diagenetic milieu for some ancient pisolitic rocks. 相似文献
14.
Two ca 8000 year long sediment cores from the Gotland Deep, the central sub‐basin of the Baltic Sea, were studied by means of digital images, X‐radiographs and scanning electron microscopy–energy‐dispersive X‐ray mineralogical analysis to gain understanding of the physicochemical and biological influences on sedimentary‐fabric formation in modern and ancient seas with a high flux of organic carbon, and associated oxygen stress and depauperate ichnofauna. Four lithofacies were recognized: (i) sharply laminated mud; (ii) biodeformed mud; (iii) burrow‐mottled mud; and (iv) sedimentation‐event bed. The sharply laminated and burrow‐mottled facies dominate the cores as alternating long intervals, whereas the biodeformed and sedimentation‐event facies occur as thin interbeds within the sharply laminated intervals. The sharply laminated mud comprises alternating diatom‐rich and lithic laminae, with occasional Mn‐carbonate laminae. Lamination discontinuity horizons within the laminites, where the regular lamination is overlain sharply by gently inclined lamination, challenge the traditional view of mud accumulation by settling from suspension, but indicate localized accumulation by particle‐trapping microbial mats and, potentially, by the rapid lateral accretion of mud from bedload transport. The biodeformed interbeds record brief (few years to few decades) oxic–dysoxic conditions that punctuated the anoxic background conditions and permitted sediment‐surface grazing and feeding by a very immature benthic community restricted to the surface mixed tier. The likely biodeformers were meiofauna and nectobenthic pioneers passively imported with currents. The sedimentation‐event interbeds are distal mud turbidites deposited from turbidity currents probably triggered by severe storms on the adjacent coastal areas. The turbidite preservation was favoured by the anoxic background conditions. The long burrow‐mottled intervals are characterized by intensely bioturbated fabrics with discrete Planolites, rare Arenicolites/Polykladichnus and very rare Lockeia trace fossils, as well as bivalve biodeformational structures which represent shallowly penetrating endobenthic feeding and grazing strategies and permanent dwellings. These burrowed intervals represent longer periods (several years to few centuries) of oxic–dysoxic conditions that permitted maturation in the benthos by means of larval settling of opportunistic worm‐like macrofauna and bivalves, resulting in the development of a transition tier. These observations imply more dynamic and oxic depositional conditions in Gotland Deep than previously thought. Comparison to previous zoobenthic studies in the area allowed discussion of the benthic dynamics, and the identification of probable biodeforming and trace‐producing species. Implications for current biofacies and trace‐fossil models are discussed. 相似文献
15.
STEFANO ANDREUCCI MARK D. BATEMAN CLAUDIO ZUCCA SELIM KAPUR İHSAN AKŞIT ADAM DUNAJKO VINCENZO PASCUCCI 《Sedimentology》2012,59(3):917-938
A multi‐disciplinary approach was followed to investigate two thick palaeosol strata that alternate with wind‐blown dominated deposits developed along the Alghero coast (North‐west Sardinia, Italy). Optically stimulated luminescence ages reveal that both palaeosols were developed during cooler drier periods: the first one at around 70 ka Marine Isotope Stage 4 and the latter around 50 ka (Marine Isotope Stage 3). In contrast, the pedological features indicate that the palaeosols underwent heavy weathering processes under warm humid to sub‐humid conditions, characteristic of the Sardinian climate during the last interglacial stage (Marine Isotope Stage 5e). To reconcile this apparent data discrepancy, a range of sedimentological and pedological analyses were conducted. These analyses reveal that the palaeosols possess a complex history, with accumulation and weathering occurring during Marine Isotope Stage 5e, and erosion, colluviation and final deposition taking place during the following cold stages. Thus, even if these reddish palaeosols were last formed during the glacial period, the sediments building up these strata probably record the climate of the last interglacial stage (Marine Isotope Stage 5e). Trace element and X‐ray diffraction analyses, together with scanning electron microscope images, reveal the presence of Saharan dust in the parent material of the palaeosols. However, no evidence of any far‐travelled African dust has been observed in the Marine Isotope Stage 4–3 aeolian deposits. It is possible to conclude that in the West Mediterranean islands, Saharan dust input, even if of modest magnitude, is preserved preferentially in soils accumulated and weathered during interglacial stages. 相似文献
16.
Bermuda is a reef atoll along the northern edge of Caribbean coral province. Although investigated by seismic and some shallow drilling, the Pleistocene marine depositional geohistory is poorly constrained. Islands along the southern rim are built by tropical calcareous aeolianites that range in age from Holocene to early Pleistocene (ca 880 kyr). These dunes are composed of particles that were derived from adjacent Pleistocene marine environments at the time of formation. Thus, the aeolianites should contain a record of marine deposition through the Early to Late Pleistocene. Carbonate grains from all aeolian deposits can, via Ward cluster analysis, be separated into two distinct groups: (i) a Halimeda‐rich group; and (ii) a crustose coralline‐rich group. Distribution of these two groups is interpreted to broadly reflect low‐energy (lagoonal) and high‐energy marginal reef (coralline algae and cup‐reef) environments, respectively. Unlike the beach sources, coral particles are perplexingly absent in the aeolianites. This conundrum is interpreted to partly reflect the domal nature of Bermudan corals, which are not incorporated into aeolian deposits due to their relatively large size. Aeolianites from Marine Isotope Stages 7, 9 and 11 record sediments produced in adjacent shallow marine settings that were similar to those present today. The spatially consistent sediment trends are not, however, present in aeolianites from Marine Isotope Stage 5E, where the aeolian bioclastic components are uniformly rich in Halimeda along both southern and northern shores. Such a distribution, where coralline‐rich sediments would be expected, suggests an extrinsic oceanographic control, interpreted herein to be elevated seawater temperature brought in by the Gulf Stream. This interpretation is consistent with palaeozoological studies of Bermuda, as well as North America, the Mediterranean, Japan and Western Australia. 相似文献
17.
JÜRGEN TITSCHACK CAMPBELL S. NELSON TIM BECK ANDRÉ FREIWALD ULRICH RADTKE 《Sedimentology》2008,55(6):1747-1776
Autochthonous red algal structures known as coralligène de plateau occur in the modern warm‐temperate Mediterranean Sea at water depths from 20 to 120 m, but fossil counterparts are not so well‐known. This study describes, from an uplifted coastal section at Plimiri on the island of Rhodes, a 450 m long by 10 m thick Late Pleistocene red algal reef (Coralligène Facies), interpreted as being a coralligène de plateau, and its associated deposits. The Coralligène Facies, constructed mainly by Lithophyllum and Titanoderma, sits unconformably upon the Plio‐Pleistocene Rhodes Formation and is overlain by a Maerl Facies (2 m), a Mixed Siliciclastic‐Carbonate Facies (0·2 m) and an Aeolian Sand Facies (2·5 m). The three calcareous facies, of Heterozoan character, are correlated with established members in the Lindos Acropolis Formation in the north of the island, while the aeolian facies is assigned to the new Plimiri Aeolianite Formation. The palaeoenvironmental and genetic‐stratigraphic interpretations of these mixed siliciclastic‐carbonate temperate water deposits involved consideration of certain characteristics associated with siliciclastic shelf and tropical carbonate shelf models, such as vertical grain‐size trends and the stratigraphic position of zooxanthellate coral growths. Integration of these results with electron spin resonance dates of bivalve shells indicates that the Coralligène Facies was deposited during Marine Isotope Stage 6 to 5e transgressive event (ca 135 to 120 ka), in water depths of 20 to 50 m, and the overlying Maerl Facies was deposited during regression from Marine Isotope Stage 5e to 5d (ca 120 to 110 ka), at water depths of 25 to 40 m. The capping Aeolian Sand Facies, involving dual terrestrial subunits, is interpreted as having formed during each of the glacial intervals Marine Isotope Stages 4 (71 to 59 ka) and 2 (24 to 12 ka), with soil formation during the subsequent interglacial periods of Marine Isotope Stages 3 and 1, respectively. Accumulation rates of about 0·7 mm year?1 are estimated for the Coralligène Facies and minimum accumulation rates of 0·2 mm year?1 are estimated for the Maerl Facies. The existence of older red algal reefs in the Plimiri region during at least Marine Isotope Stages 7 (245 to 186 ka) and 9 (339 to 303 ka) is inferred from the occurrence of reworked coralligène‐type lithoclasts in the basal part of the section and from the electron spin resonance ages of transported bivalve shells. 相似文献
18.
Eberhard Gischler J. Harold Hudson Marc Humblet Juan Carlos Braga Dominik Schmitt Anja Isaack Anton Eisenhauer Gilbert F. Camoin 《Sedimentology》2019,66(1):305-328
Holocene fringing reef development around Bora Bora is controlled by variations in accommodation space (as a function of sea‐level and antecedent topography) and exposure to waves and currents. Subsidence ranged from 0 to 0·11 m kyr?1, and did not create significant accommodation space. A windward fringing reef started to grow 8·7 kyr bp , retrograded towards the coast over a Pleistocene fringing reef until ca 6·0 kyr bp , and then prograded towards the lagoon after sea‐level had reached its present level. The retrograding portion of the reef is dominated by corals, calcareous algae and microbialite frameworks; the prograding portion is largely detrital. The reef is up to 13·5 m thick and accreted vertically with an average rate of 3·12 m kyr?1. Lateral growth amounts to 13·3 m kyr?1. Reef corals are dominated by an inner Pocillopora assemblage and an outer Acropora assemblage. Both assemblages comprise thick crusts of coralline algae. Palaeobathymetry suggests deposition in 0 to 10 m depth. An underlying Pleistocene fringing reef formed during the sea‐level highstand of Marine Isotope Stage 5e, and is also characterized by the occurrence of corals, coralline algal crusts and microbialites. A previously investigated, leeward fringing reef started to form contemporaneously (8·78 kyr bp ), but is thicker (up to 20 m) and solely prograded throughout the Holocene. A shallow Pocillopora assemblage and a deeper water Montipora assemblage were identified, but detrital facies dominate. At the Holocene reef base, only basalt was recovered. The Holocene windward–leeward differences are a consequence of less accommodation space on the eastern island side that eventually led to a more complex reef architecture. As a result of higher rates of exposure and flushing, the reef framework on the windward island side is more abundant and experienced stronger cementation. In the Pleistocene, the environmental conditions on the leeward island side were presumably unfavourable for fringing reef growth. 相似文献
19.
A sloping travertine mound, approximately 85 m across and a few metres thick is actively forming from cool temperature waters issuing out of Crystal Geyser, east‐central Utah, USA. Older travertine deposits exist at the site, the waters having used the Little Grand Wash Fault system as conduits. In contrast, the present Crystal Geyser travertine mound forms from 18°C waters which have been erupting for the last 80 years from an abandoned oil well. The present Crystal Geyser travertine accumulation forms from a ‘man‐made’ cool temperature geyser system; nevertheless, the constituents are an analogue for ancient geyser‐fed carbonate deposits. The travertine primary fabric is composed of couplets of highly porous, thin micritic laminae intercalated with thicker iron oxide rich laminae. Low Mg‐calcite is the dominant mineralogy; however, aragonite is a major constituent in deposits proximal to the vent and decreases in abundance distally. Cements exhibit a variety of fabrics, isopachous being common. Constituents include micro‐stromatolites, clasts, pisoids and the common occurrence of Frutexites‐like iron oxide precipitates. Leptothrix, a common iron‐oxidizing bacterium, is believed to be responsible for the production of the dense iron‐rich laminae. Pisoids litter the ground around the vent and rapidly decrease distally in abundance and size. 相似文献
20.
Late Quaternary multiple incised valley systems: An unusually well‐preserved stratigraphic record of two interglacial valley‐fill successions from the Arno Plain (northern Tuscany,Italy) 下载免费PDF全文
下载免费PDF全文 Un‐fragmented stratigraphic records of late Quaternary multiple incised valley systems are rarely preserved in the subsurface of alluvial‐delta plains due to older valley reoccupation. The identification of a well‐preserved incised valley fill succession beneath the southern interfluve of the Last Glacial Maximum Arno palaeovalley (northern Italy) represents an exceptional opportunity to examine in detail evolutionary trends of a Mediterranean system over multiple glacial–interglacial cycles. Through sedimentological and quantitative meiofauna (benthic foraminifera and ostracods) analyses of two reference cores (80 m and 100 m long) and stratigraphic correlations, a mid‐Pleistocene palaeovalley, 5 km wide and 50 m deep, was reconstructed. Whereas valley filling is chronologically constrained to the penultimate interglacial (Marine Isotope Stage 7) by four electron spin resonance ages on bivalve shells (Cerastoderma glaucum), its incision is tentatively correlated with the Marine Isotope Stage 8 sea‐level fall. Above basal fluvial‐channel gravels, the incised valley fill is formed by a mud‐prone succession, up to 44 m thick, formed by a lower floodplain unit and an upper unit with brackish meiofauna that reflects the development of a wave‐dominated estuary. Subtle meiofauna changes towards less confined conditions record two marine flooding episodes, chronologically linked to the internal Marine Isotope Stage 7 climate‐eustatic variability. After the maximum transgressive phase, recorded by coastal sands, the interfluves were flooded around 200 ka (latest Marine Isotope Stage 7). The subsequent shift in river incision patterns, possibly driven by neotectonic activity, prevented valley reoccupation guiding the northward formation of the Last Glacial Maximum palaeovalley. The applied multivariate approach allowed the sedimentological characterization of the Marine Isotope Stage 7 and Marine Isotope Stage 1 palaeovalley fills, including shape, size and facies architecture, which revealed a consistent river‐coastal system response over two non‐consecutive glacial–interglacial cycles (Marine Isotope Stages 8 to 7 and Marine Isotope Stages 2 to 1). The recurring stacking pattern of facies documents a predominant control exerted on stratigraphy by Milankovitch and sub‐Milankovitch glacio‐eustatic oscillations across the late Quaternary period. 相似文献