首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Analyses of the specific products of 35SO42? reduction measurements were made in marine sediments in Denmark. We injected tracer quantities of 35SO42? into cores, incubated the cores, and assayed for 35S-labelled acid volatile sulfides. Additionally, we assayed for 35S-labelled elemental sulfur by extraction with CS2, and for 35S-labelled pyrite by reduction with chromium (II). We separately determined that elemental sulfur which formed in situ and that which formed by oxidation during the acid distillation of acid volatile sulfides.In subtidal sediments in Limfjorden, 35S-labelled elemental sulfur and pyrite make up 14–32% of the reduced sulfur formed in short-term (0–48 hours) 35SO42? reduction experiments, at all depths studied (0–15 cm). Labelled elemental sulfur which formed in situ during the incubations at depths below 1 cm made up a fairly constant 5–11% of the total labelled reduced sulfur, from 0–1 cm, it made up 27%. An additional small amount (1–2% from 1–15 cm and 5% from 0–1 cm) of labelled elemental sulfur was formed during the acid-distillation step in our assay for labelled acid-volatile sulndes. Pyrite contained 4–13% of the total labelled reduced sulfur at all depths. Rates of sulfate reduction in Limfjorden were linear over the period 0–48 hours, and 35S-pyrite made up a nearly constant percentage of the 35S-labelled reduced sulfur formed over this time period.Estimates of sulfate reduction rates for Limfjorden which do not include elemental sulfur and pyrite as products are 19% too low. At Kysing Fjord, estimates of sulfate reduction which do not include elemental sulfur and pyrite are 24% to 32% too low. Thus, while previously published data on sulfate reduction in similar environments are probably low, they are not greatly in error.  相似文献   

2.
The biogeochemistry of iron sulfide minerals in the water column of the Cariaco Basin was investigated in November 2007 (non-upwelling season) and May 2008 (upwelling season) as part of the on-going CARIACO (CArbon Retention In A Colored Ocean) time series project. The concentrations of particulate sulfur species, specifically acid volatile sulfur (AVS), greigite, pyrite, and particulate elemental sulfur, were determined at high resolution near the O2/H2S interface. In November 2007, AVS was low throughout the water column, with the highest concentration at the depth where sulfide was first detected (260 m) and with a second peak at 500 m. Greigite, pyrite, and particulate elemental sulfur showed distinct concentration maxima near the interface. In May 2008, AVS was not detected in the water column. Maxima for greigite, pyrite, and particulate elemental sulfur were again observed near the interface. We also studied the iron sulfide flux using sediment trap materials collected at the Cariaco station. Pyrite comprised 0.2-0.4% of the total particulate flux in the anoxic water column, with a flux of 0.5-1.6 mg S m−2 d−1.Consistent with the water column concentration profiles for iron sulfide minerals, the sulfur isotope composition of particulate sulfur found in deep anoxic traps was similar to that of dissolved sulfide near the O2/H2S interface. We conclude that pyrite is formed mainly within the redoxcline where sulfur cycling imparts a distinct isotopic signature compared to dissolved sulfide in the deep anoxic water. This conclusion is consistent with our previous study of sulfur species and chemoautotrophic production, which suggests that reaction of sulfide with reactive iron is an important pathway for sulfide oxidation and sulfur intermediate formation near the interface. Pyrite and elemental sulfur distributions favor a pathway of pyrite formation via the reaction of FeS with polysulfides or particulate elemental sulfur near the interface. A comparison of thermodynamic predictions with actual concentration profiles for iron sulfides leads us to argue that microbes may mediate this precipitation.  相似文献   

3.
《Chemical Geology》2007,236(3-4):228-246
  相似文献   

4.
Geology and mineralogy of the Ulakhan Au-Ag epithermal deposit (northeastern Russia, Magadan Region) are considered. A four-stage scheme of mineral formation sequence is proposed. Concentrations of Au and Ag in minerals of early and late parageneses were determined. It has been established that uytenbogaardtite is associated with native gold and hypergenesis stage minerals — goethite, hydrogoethite, or limonite replacing pyrite. The compositions of uytenbogaardtite (Ag3AuS2), acanthite (Ag2S), and native gold were studied. The composition of the Ulakhan uytenbogaardtite is compared with those of Au and Ag sulfides from other deposits. Thermodynamic calculations in the system H2O–Fe–Au–Ag–S–C–Na–Cl were carried out, which simulate the interaction of native gold and silver with O2- and CO2-saturated surface waters (carbonaceous, sulfide-carbonaceous, and chloride-sodium-carbonaceous) in the presence and absence of acanthite and pyrite at 25 °C and 1 bar. In closed pyrite-including systems, native silver and kustelite are replaced by acanthite; electrum, by uytenbogaardtite, acanthite, and pure gold; and native gold with a fineness of 700–900‰, by pure gold and uytenbogaardtite. Under the interaction with surface waters in the presence of Ag2S and pyrite, Au-Ag alloys form equilibrium assemblages with petrovskaite or uytenbogaardtite and pure gold. The calculation results confirmed that Au and Ag sulfides can form after native gold in systems involving sulfide-carbon dioxide solutions (H2Saq > 10–4 m). The modeling results support the possible formation of uytenbogaardtite and petrovskaite with the participation of native gold in the hypergenesis zone of epithermal Au-Ag deposits during the oxidation of Au(Ag)-containing pyrite, acanthite, or other sulfides.  相似文献   

5.
Experimental investigations on pyrite synthesis indicate that before pyrite can be produced by a reaction involving ferrous iron, the disulphide ion must be formed; in experiments described the ion was obtained by the action of H2S in aqueous solution on elemental sulphur. Conditions under which the experiments were conducted indicate that pyrite will not form above pH 6.0. The reaction to produce pyrite is fastest when oxygen is excluded and elemental sulphur is produced from the oxidation of H2S by ferric iron. A reaction between FeS and elemental sulphur will yield pyrite at a much slower rate, although the same basic reaction is involved. An attempt has been made to relate the occurrence of pyrite in different sedimentary environments to this basic chemistry.
Zusammenfassung Wie Versuche zeigen, ist die Voraussetzung der Pyrit-Bildung das Vorliegen von S 2 2– -Ionen, die dann mit FeII reagieren. Die S 2 2– -Ionen wurden durch Einwirken einer verdünnten H2S-Lösung auf elementaren Schwefel erhalten. Pyrite entstehen in diesen Experimenten somit nur unterhalb pH 6. Pyrit erhält man am schnellsten, wenn Sauerstoff abwesend ist und der H2S durch FeIII oxidiert wird. Die Umsetzung von FeS mit elementarem Schwefel liefert Pyrit wesentlich langsamer, wenn auch die zugrunde liegenden Reaktionen sich entsprechen. Es wird versucht, sedimentäre Pyrit-Vorkommen entsprechend diesen Reaktionsabläufen zu deuten.
  相似文献   

6.
Oxidation of pyrite by hydrogen peroxide (H2O2) at millimolar levels has been studied from 4 to 150 °C in order to evaluate isotopic effects potentially associated with radiolytic oxidation of pyrite. Gaseous, aqueous, and solid phases were collected and measured following sealed-tube experiments that lasted from 1 to 14 days. The dominant gaseous product was molecular oxygen. No volatile sulfur species were recovered from any experiment. Sulfate was the only aqueous sulfur species detected in solution, with sulfite and thiosulfate below the detection limits. X-ray diffraction patterns and images from scanning electron microscopy reveal solid residues composed primarily of hydrated ferric iron sulfates and sporadic ferric-ferrous iron sulfates. Hematite was detected only in solid residue produced during high temperature experiments. Elemental sulfur and/or polysulfides are inferred to be form on reacting pyrite surface based on extraction with organic solvents. Pyrite oxidation by H2O2 increases in rate with increasing H2O2concentration, pyrite surface area, and temperature. Rates measured in sealed-tube experiments at 25°C, for H2O2 concentration of 2 × 10−3 M are 8.8 × 10−9 M/m2/sec, which are higher than previous estimates. A combination of reactive oxygen species from H2O2 decomposition products and reactive iron species from pyrite dissolution is inferred to aggressively oxidize the receding pyrite surface. Competing oxidants with temperature-dependent oxidation efficiencies results in multiple reaction mechanisms for different temperatures and surface conditions. Sulfur isotope values of remaining pyrite were unchanged during the experiments, but showed distinct enrichment of 34S in produced sulfate and depletion in elemental sulfur. The Δsulfate-pyrite and Δelemental sulfur-pyrite was +0.5 to +1.5‰ and was −0.2 to −1‰, respectively. Isotope data from high-temperature experiments indicate an additional 34S-depleted sulfur fraction, with up to 4‰ depletion of 34S, in the hematite. Sulfur isotope trends were not influenced by H2O2 concentration, temperature, or reaction time. Results of this study indicate that radiolytically produced oxidants, such as hydrogen peroxide and hydroxyl radicals, could efficiently oxidize pyrite in an otherwise oxygen-limited environment. Although H2O2 is generally regarded as being of minor geochemical significance on Earth, the H2O2 molecule plays a pivotal role in Martian atmospheric and soil chemistry. Additional experimental and field studies are needed to characterize sulfur and oxygen isotope systematics during radiolytical oxidation of metallic sulfides and elemental sulfur.  相似文献   

7.
Pyritization in late Pleistocene sediments of the Black Sea is driven by sulfide formed during anaerobic methane oxidation. A sulfidization front is formed by the opposing gradients of sulfide and dissolved iron. The sulfidization processes are controlled by the diffusion flux of sulfide from above and by the solid reactive iron content. Two processes of diffusion-limited pyrite formation were identified. The first process includes pyrite precipitation with the accumulation of iron sulfide precursors with the average chemical composition of FeSn (n = 1.10-1.29), including greigite. Elemental sulfur and polysulfides, formed from H2S by a reductive dissolution of Fe(III)-containing minerals, serve as intermediates to convert iron sulfides into pyrite. In the second process, a “direct” pyrite precipitation occurs through prolonged exposure of iron-containing minerals to dissolved sulfide. Methane-driven sulfate reduction at depth causes a progressive formation of pyrite with a δ34S of up to +15.0‰. The S-isotopic composition of FeS2 evolves due to contributions of different sulfur pools formed at different times. Steady-state model calculations for the advancement of the sulfidization front showed that the process started at the Pleistocene/Holocene transition between 6360 and 11 600 yr BP. Our study highlights the importance of anaerobic methane oxidation in generating and maintaining S-enriched layers in marine sediments and has paleoenvironmental implications.  相似文献   

8.
We examined the transformations of Fe and S associated with schwertmannite (Fe8O8(OH)6SO4) reduction in acidified coastal lowlands. This was achieved by conducting a 91 day diffusive-flux column experiment, which involved waterlogging of natural schwertmannite- and organic-rich soil material. This experiment was complemented by short-term batch experiments utilizing synthetic schwertmannite. Waterlogging readily induced bacterial reduction of schwertmannite-derived Fe(III), producing abundant pore-water FeII, SO4 and alkalinity. Production of alkalinity increased pH from pH 3.4 to pH ∼6.5 within the initial 14 days, facilitating the precipitation of siderite (FeCO3). Interactions between schwertmannite and FeII at pH ∼6.5 were found, for the first time, to catalyse the transformation of schwertmannite to goethite (αFeOOH). Thermodynamic calculations indicate that this FeII-catalysed transformation shifted the biogeochemical regime from an initial dominance of Fe(III)-reduction to a subsequent co-occurrence of both Fe(III)- and SO4-reduction. This lead firstly to the formation of elemental S via H2S oxidation by goethite, and later also to formation of nanoparticulate mackinawite (FeS) via H2S precipitation with FeII. Pyrite (FeS2) was a quantitatively insignificant product of reductive Fe and S mineralization. This study provides important new insights into Fe and S geochemistry in settings where schwertmannite is subjected to reducing conditions.  相似文献   

9.
Hydrous pyrolysis experiments at 200 to 365°C were carried out on a thermally immature organic-rich limestone containing Type-IIS kerogen from the Ghareb Limestone in North Negev, Israel. This work focuses on the thermal behavior of both organic and inorganic sulfur species and the partitioning of their stable sulfur isotopes among organic and inorganic phases generated during hydrous pyrolyses. Most of the sulfur in the rock (85%) is organic sulfur. The most dominant sulfur transformation is cleavage of organic-bound sulfur to form H2S(gas). Up to 70% of this organic sulfur is released as H2S(gas) that is isotopically lighter than the sulfur in the kerogen. Organic sulfur is enriched by up to 2‰ in 34S during thermal maturation compared with the initial δ34S values. The δ34S values of the three main organic fractions (kerogen, bitumen and expelled oil) are within 1‰ of one another. No thermochemical sulfate reduction or sulfate formation was observed during the experiments. The early released sulfur reacted with available iron to form secondary pyrite and is the most 34S depleted phase, which is 21‰ lighter than the bulk organic sulfur. The large isotopic fractionation for the early formed H2S is a result of the system not being in equilibrium. As partial pressure of H2S(gas) increases, retro reactions with the organic sulfur in the closed system may cause isotope exchange and isotopic homogenization. Part of the δ34S-enriched secondary pyrite decomposes above 300°C resulting in a corresponding decrease in the δ34S of the remaining pyrite. These results are relevant to interpreting thermal maturation processes and their effect on kerogen-oil-H2S-pyrite correlations. In particular, the use of pyrite-kerogen δ34S relations in reconstructing diagenetic conditions of thermally mature rocks is questionable because formation of secondary pyrite during thermal maturation can mask the isotopic signature and quantity of the original diagenetic pyrite. The main transformations of kerogen to bitumen and bitumen to oil can be recorded by using both sulfur content and δ34S of each phase including the H2S(gas). H2S generated in association with oil should be isotopically lighter or similar to oil. It is concluded that small isotopic differentiation obtained between organic and inorganic sulfur species suggests closed-system conditions. Conversely, open-system conditions may cause significant isotopic discrimination between the oil and its source kerogen. The magnitude of this discrimination is suggested to be highly dependent on the availability of iron in a source rock resulting in secondary formation of pyrite.  相似文献   

10.
Organic sulfur in marine sediment is 34S enriched relative to the co-existing pyrite. This phenomenon is still enigmatic. Timing of the sulfur incorporation, immobilization and different sulfur species involved are part of the explanations. The reduced sulfur species incorporation into organic matter (OM) is generally assumed to have negligible δ34S fractionation. This assumption has never been confirmed by laboratory experimental data. The present study measures the δ34S changes resulting from reduced sulfur species (sulfides and polysulfide anions) incorporation into organic model compounds in an aquatic and low temperature (25 °C) system that simulates diagenetic marine environment. In addition, we also investigate the δ34S fractionation and the isotope chemical mixing in the formation of polysulfide anions produced from elemental sulfur and sulfide anions. The results showed total isotope mixing between the two species in the formation of polysulfides. Acidification of the polysulfides solution caused δ34S fractionation between the released elemental sulfur and H2S. The incorporation of polysulfides and sulfides into carbonyl groups, caused 34S enrichment relative to the starting polysulfides and sulfide of 4–5‰. The 34S enrichment of the sulfurized carbonyl groups showed a minimal effect by temperature (0–70 °C) and is not affected by salinity, polysulfides composition, reaction time or solubility in water. The incorporation of polysulfides and sulfides into brominated organic compounds was negligibly 34S enriched. The chemical mechanisms controlling the polysulfides incorporation into OM depend mostly on the functional groups and determine the 34S enrichment of the sulfurized OM. The results presented in this study can explain part of the difference between pyrite δ34S and sulfurized OM δ34S in natural marine sediments.  相似文献   

11.
《Geochimica et cosmochimica acta》1999,63(19-20):3373-3378
Interactions of trace metals with sulfide in anoxic environments are important in determining their chemical form and potential toxicity to organisms. In recent years, a considerable body of observational data has accumulated that indicates very different behavior for various trace metals in sulfidic sediments. These differences in behavior cannot be entirely attributed to thermodynamic relationships, but also reflect differences in ligand exchange reaction kinetics, and redox reaction pathways.Pb, Zn, and Cd, which are generally pyritized to only a few percent of the “reactive” fraction, have faster water exchange reaction kinetics than Fe2+, resulting in MeS phases precipitating prior to FeS formation and subsequent pyrite formation, whereas, Co and Ni, which have slower H2O exchange kinetics than Fe2+, are incorporated into pyrite. Although Hg and Cu have faster reaction kinetics than Fe2+, both are incorporated into pyrite or leached from the pyrite fraction with nitric acid. Hg undergoes significant chloride complexation, which can retard reaction with sulfide, but can also replace Fe in FeS to form HgS, which can only be dissolved in the pyrite fraction. Cu2+ is reduced by sulfide and forms a variety of sulfides with and without Fe that can only be dissolved with nitric acid. Mn2+ does not form a MnS phase easily and is incorporated into pyrite at high iron degrees of pyritization (DOP).Oxyanions of Mo and As are first reduced by sulfide. These reduced forms may then react with sulfides resulting in incorporation into pyrite. However, the oxyanion of Cr is reduced to Cr3+, which is kinetically inert to reaction with sulfide and, therefore, not incorporated into pyrite.  相似文献   

12.
Sulfate reduction during seawater reaction with fayalite and with magnetite was rapid at 350°C, producing equilibrium assemblages of talc-pyrite-hematite-magnetite at low water/rock ratios and talc-pyrite-hematite-anhydrite at higher water/rock ratios. At 250°C, seawater reacting with fayalite produced detectable amounts of dissolved H2S, but extent of reaction of solid phases was minor after 150 days. At 200°C, dissolved H2S was not detected, even after 219 days, but mass balance calculations suggest a small amount of pyrite may have formed. Reaction stoichiometry indicates that sulfate reduction requires large amounts of H+, which, in subseafloor hydrothermal systems is provided by Mg metasomatism. Seawater contains sufficient Mg to supply all the H+ necessary for quantitative reduction of seawater sulfate.Systematics of sulfur isotopes in the 250 and 350°C experiments indicate that isotopic equilibrium is reached, and can be modeled as a Rayleigh distillation process. Isotopic composition of hydrothermally produced H2S in natural systems is strongly dependent upon the seawater/basalt ratio in the geothermal system, which controls the relative sulfide contributions from the two important sulfur sources, seawater sulfate and sulfide phases in basalt. Anhydrite precipitation during geothermal heating severely limits sulfate ingress into high temperature interaction zones. Quantitative sulfate reduction can thus be accomplished without producing strongly oxidized rocks and resultant sulfide sulfur isotope values represent a mixture of seawater and basaltic sulfur.  相似文献   

13.
Microbial SO42− reduction limits accumulation of aqueous As in reducing aquifers where the sulfide that is produced forms minerals that sequester As. We examined the potential for As partitioning into As- and Fe-sulfide minerals in anaerobic, semi-continuous flow bioreactors inoculated with 0.5% (g mL−1) fine-grained alluvial aquifer sediment. A fluid residence time of three weeks was maintained over a ca. 300-d incubation period by replacing one-third of the aqueous phase volume of the reactors with fresh medium every seven days. The medium had a composition comparable to natural As-contaminated groundwater with slightly basic pH (7.3) and 7.5 μM aqueous As(V) and also contained 0.8 mM acetate to stimulate microbial activity. Medium was delivered to a reactor system with and without 10 mmol L−1 synthetic goethite (α-FeOOH). In both reactors, influent As(V) was almost completely reduced to As(III). Pure As-sulfide minerals did not form in the Fe-limited reactor. Realgar (As4S4) and As2S3(am) were undersaturated throughout the experiment. Orpiment (As2S3) was saturated while sulfide content was low (∼50 to 150 μM), but precipitation was likely limited by slow kinetics. Reaction-path modeling suggests that, even if these minerals had formed, the dissolved As content of the reactor would have remained at hazardous levels. Mackinawite (Fe1 + xS; x ? 0.07) formed readily in the Fe-bearing reactor and held dissolved sulfide at levels below saturation for orpiment and realgar. The mackinawite sequestered little As (<0.1 wt.%), however, and aqueous As accumulated to levels above the influent concentration as microbial Fe(III) reduction consumed goethite and mobilized adsorbed As. A relatively small amount of pyrite (FeS2) and greigite (Fe3S4) formed in the Fe-bearing reactor when we injected a polysulfide solution (Na2S4) to a final concentration of 0.5 mM after 216, 230, 279, and 286 days. The pyrite, and to a lesser extent the greigite, that formed did sequester As from solution, containing 0.84 and 0.23 wt.% As on average, respectively. Our results suggest that As precipitation during Fe-sulfide formation in nature occurs mainly in conjunction with pyrite formation. Our findings imply that the effectiveness of stimulating microbial SO42− reduction to remediate As contamination may be limited by the rate and extent of pyrite formation and the solubility of As-sulfides.  相似文献   

14.
Sulfur isotopic disequilibrium is commonly observed between associated pyrite and copper sulfides in NW Queensland. A sulfur isotopic study of copper mineralization in dolomites at Paradise Valley and arenites at Mammoth has allowed the significance of such disequilibrium to be evaluated. Copper mineralization at Paradise Valley is characterized by a greater enrichment in 34S, with δ34S values often greater than +30‰, for both copper sulfides and associated syngenetic/diagneetic pyrite. At Mammoth, copper sulfides have isotopic compositions (δ34S=?15.9 to ?0.3‰) transitional between disseminated syngenetic/diagenetic pyrite (δ34S=?5.7 to ?1.7‰) and epigenetic vein pyrite (δ34S=?17.9 to ?7.1‰) suggesting progressive reaction and replacement of syngenetic/diagenetic pyrite by a copper-bearing mineralizing fluid under oxidizing conditions. The isotopic data, within the constraints imposed by geological and geochemical factors, support a model of reaction between copper-bearing mineralizing fluids and pre-existing syngenetic/diagenetic pyrite for both the carbonate- and arenite-hosted deposits.  相似文献   

15.
There is a positive correlation between sulphur concentration and the vitrinite maceral group content in Permian Vryheid Formation coals in South Africa; the reverse is true for the inertinite maceral family. This relationship is evident at intraseam, interseam and intercoalfied levels. Vitrinite precursors formed where the water table in peat-forming environments was high and Eh low. These conditions favoured bacterial sulphate reduction and resulting H2S reacted with Fe2+ and organic peat compounds to form pyrite and organic sulphur components. Inertinite precursors formed when the water table was low and Eh high; aerobic respiration prevailed and little H2S was produced. Organic sulphur derived from peat-forming plant tissue is dominant in intertinite-rich low-sulphur coal; pyritic sulphur exceeds organic sulphur in high-sulphur coals dur to preferential reaction of H2S with Fe2+.  相似文献   

16.
Pyrite is an environmentally significant mineral being the major contributor to acid rock drainage. Synchrotron based SPEM (scanning photoelectron microscopy) and micro-XPS (X-ray photoelectron spectroscopy) have been used to characterise fresh and oxidised pyrite (FeS2) with a view to understanding the initial oxidation steps that take place during natural weathering processes. Localised regions of the pyrite surface containing Fe species of reduced coordination have been found to play a critical role. Such sites not only initiate the oxidation process but also facilitate the formation of highly reactive hydroxyl radical species, which then lead the S oxidation process.Four different S species are found to be present on fresh fractured pyrite surfaces: S22−(bulk) (4-fold coordination), S22−(surface) (3-fold coordination), S2− and S0/Sn2− (metal deficient sulfide and polysulfide respectively). These species were found to be heterogeneously distributed on the fractured pyrite surface. Both O2 and H2O gases are needed for effective oxidation of the pyrite surface. The process is initiated when O2 dissociatively and H2O molecularly adsorb onto the surface Fe sites where high dangling bond densities exist. H2O may then dissociate to produce OH radicals. The adsorption of these species leads to the formation of Fe-oxy species prior to the formation of sulfoxy species. Evidence suggests that Fe-O bonds form prior to Fe-OH bonds. S oxidation occurs through interactions of OH radicals formed at the Fe sites, with formation of SO42− occurring via S2O32−/SO32− intermediates. The pyrite oxidation process is electrochemical in nature and was found to occur in patches, where site specific adsorption of O2 and H2O has occurred. Fe and S oxidation was found to occur within the same area of oxidation probably in atomic scale proximity. Furthermore, the O in SO42− arises largely from H2O; however, depending on the surface history, SO42− formed early in the oxidation process may also contain O from O2.  相似文献   

17.
《Applied Geochemistry》1988,3(3):333-344
The sediments of Lake Anna, Virginia, act as a major sink for incoming acid mine drainage (AMD) pollutants (Fe, SO42−, H+) due to bacterial sulfate reduction (SR). Acid-volatile sulfide (AVS), elemental S, and pyrite concentrations in the sediments of the polluted arm of the lake are significantly greater than those in unpolluted sections of the lake. Measurements of SR using 35SSO42− showed that AVS and S0 are the major short-term (48 h) products of SR in these sediments. Inorganic forms of S(AVS, S0, and FeS2) made up from 60 to 100% of the total sediment S concentration. Pyrite concentrations in the sediment were high but decreased exponentially with distance from the AMD source, suggesting that the pyrite was deposited as stream detritus from the abandoned mines. Iron monosulfide and elemental S concentrations were highest at a station 1 km away from the AMD inflow, indicating formation in situ. There was no evidence for the formation of organic S species. The results suggest that in Fe- and S-rich locations such as those contaminated with acid mine drainage, the distribution of end products of SR may vary substantially from those reported for more moderate environments.  相似文献   

18.
Sulfide sulfur in mid-oceanic ridge hydrothermal vents is derived from leaching of basaltic-sulfide and seawater-derived sulfate that is reduced during high temperature water rock interaction. Conventional sulfur isotope studies, however, are inconclusive about the mass-balance between the two sources because 34S/32S ratios of vent fluid H2S and chimney sulfide minerals may reflect not only the mixing ratio but also isotope exchange between sulfate and sulfide. Here, we show that high-precision analysis of S-33 can provide a unique constraint because isotope mixing and isotope exchange result in different Δ33S (≡δ33S-0.515 δ34S) values of up to 0.04‰ even if δ34S values are identical. Detection of such small Δ33S differences is technically feasible by using the SF6 dual-inlet mass-spectrometry protocol that has been improved to achieve a precision as good as 0.006‰ (2σ).Sulfide minerals (marcasite, pyrite, chalcopyrite, and sphalerite) and vent H2S collected from four active seafloor hydrothermal vent sites, East Pacific Rise (EPR) 9-10°N, 13°N, and 21°S and Mid-Atlantic Ridge (MAR) 37°N yield Δ33S values ranging from −0.002 to 0.033 and δ34S from −0.5‰ to 5.3‰. The combined δ34S and Δ33S systematics reveal that 73 to 89% of vent sulfides are derived from leaching from basaltic sulfide and only 11 to 27% from seawater-derived sulfate. Pyrite from EPR 13°N and marcasite from MAR 37°N are in isotope disequilibrium not only in δ34S but also in Δ33S with respect to associated sphalerite and chalcopyrite, suggesting non-equilibrium sulfur isotope exchange between seawater sulfate and sulfide during pyrite precipitation. Seafloor hydrothermal vent sulfides are characterized by low Δ33S values compared with biogenic sulfides, suggesting little or no contribution of sulfide from microbial sulfate reduction into hydrothermal sulfides at sediment-free mid-oceanic ridge systems. We conclude that 33S is an effective new tracer for interplay among seawater, oceanic crust and microbes in subseafloor hydrothermal sulfur cycles.  相似文献   

19.
The Bangbu gold deposit is a large orogenic gold deposit in Tibet formed during the AlpineHimalayan collision. Ore bodies(auriferous quartz veins) are controlled by the E-W-trending Qusong-Cuogu-Zhemulang brittle-ductile shear zone. Quartz veins at the deposit can be divided into three types: pre-metallogenic hook-like quartz veins, metallogenic auriferous quartz veins, and postmetallogenic N-S quartz veins. Four stages of mineralization in the auriferous quartz veins have been identified:(1) Stage S1 quartz+coarse-grained sulfides,(2) Stage S2 gold+fine-grained sulfides,(3) Stage S3 quartz+carbonates, and(4) Stage S4 quartz+ greigite. Fluid inclusions indicate the oreforming fluid was CO_2-N_2-CH_4 rich with homogenization temperatures of 170–261°C, salinities 4.34–7.45 wt% Na Cl equivalent. δ~(18)Ofluid(3.98‰–7.18‰) and low δDV-SMOW(-90‰ to-44‰) for auriferous quartz veins suggest ore-forming fluids were mainly metamorphic in origin, with some addition of organic matter. Quartz vein pyrite has δ~(34)SV-CDT values of 1.2‰–3.6‰(an average of 2.2‰), whereas pyrite from phyllite has δ~(34)SV-CDT 5.7‰–9.9‰(an average of 7.4‰). Quartz vein pyrites yield 206Pb/204 Pb ratios of 18.662–18.764, 207Pb/204 Pb 15.650–15.683, and ~(208)Pb/204 Pb 38.901–39.079. These isotopic data indicate Bangbu ore-forming materials were probably derived from the Langjiexue accretionary wedge. 40Ar/39 Ar ages for sericite from auriferous sulfide-quartz veins yield a plateau age of 49.52 ± 0.52 Ma, an isochron age of 50.3 ± 0.31 Ma, suggesting that auriferous veins were formed during the main collisional period of the Tibet-Himalayan orogen(~65–41 Ma).  相似文献   

20.
The biogeochemistry of sedimentary sulfur was investigated on the continental shelf off central Chile at water depths between 24 and 88 m under partial influence of an oxygen minimum zone. Dissolved and solid iron and sulfur species, including the sulfur intermediates sulfite, thiosulfate, and elemental sulfur, were analyzed at high resolution in the top 20 cm. All stations were characterized by high rates of sulfate reduction, but only the sediments within the Bay of Concepción contained dissolved sulfide. Due to advection and/or in-situ reoxidation of sulfide, dissolved sulfate was close to bottom water values. Whereas the concentrations of sulfite and thiosulfate were mostly in the submicromolar range, elemental sulfur was by far the dominant sulfur intermediate. Although the large nitrate- and sulfur-storing bacteria Thioploca were abundant, the major part of S0 was located extracellularly. The distribution of sulfur species and dissolved iron suggests the reaction of sulfide with FeOOH as an important pathway for sulfide oxidation and sulfur intermediate formation. This is in agreement with the sulfur isotope composition of co-existing elemental sulfur and iron monosulfides. In the Bay of Concepción, sulfur isotope data suggest that pyrite formation proceeds via the reaction of FeS with polysulfides or H2S. At the shelf stations, on the other hand, pyrite was significantly depleted in 34S relative to its potential precursors FeS and S0. Isotope mass balance considerations suggest further that pyritization at depth includes light sulfide, potentially originating from bacterial sulfur disproportionation. The δ34S-values of pyrite down to −38‰ vs. V-CDT are among the lightest found in organic-rich marine sediments. Seasonal variations in the sulfur isotope composition of dissolved sulfate indicated a dynamic non-steady-state sulfur cycle in the surface sediments. The 18O content of porewater sulfate increased with depth at all sites compared to the bottom water composition due to intracellular isotope exchange reactions during microbial sulfur transformations.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号