首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 796 毫秒
1.
中国海及邻近海域卫星观测资料同化试验   总被引：4，自引：0，他引：4  
利用1个基于POMgcs海洋模式和多重网格三维变分同化方法建立的中国海及邻近海域海面高与三维温盐流数值预报模型,通过一系列数值试验,研究了同化卫星测高和卫星遥感海面温度观测资料对该模型预报能力的影响。试验结果表明,同化卫星测高资料可明显改善海面高度与三维温度和盐度的分析预报效果,使1 200 m以上的温度预报误差减小0.16℃,并能有效提高对海洋中尺度现象的预报能力;同化卫星遥感海面温度对100 m以上的温度和盐度的预报效果有所改善,可使海面温度的预报误差减小10%。  相似文献   

2.
Satellite-borne sea surface temperature (SST) data were assimilated with the ensemble Kalman filter (EnKF) in a Northwest Pacific Ocean circulation model to examine the effect of data assimilation. The model domain included the northwestern part of the Pacific Ocean and its marginal seas, such as the Yellow Sea and East/Japan Sea. The performance of the data assimilation was evaluated by comparing the simulated ocean state with that observed. Spatially averaged root-mean-squared errors in the SST and sea surface height (SSH) decreased by 0.44 °C and 4 cm, respectively, by the assimilation. The results of the numerical experiments substantiated the effectiveness of the SST assimilation via the EnKF for all marginal seas, as well as the Kuroshio region. The benefit of the data assimilation depended on the characteristics of each marginal sea. The variation of the SST in the East/Japan Sea and the Kuroshio extension (KE) region were improved 34% and those in the Yellow Sea 12.5%. The variation of the SSH was improved approximately 36% in the KE region. This large improvement was achieved in the deep-water regions because assimilation of SST data corrected the separation point of the western boundary currents, such as the Kuroshio and the East Korea Warm Current, and the associated horizontal surface currents. The SST assimilation via the EnKF also improved the subsurface temperature profiles. The effectiveness of SST assimilation was seasonally dependent, with the improvement being relatively larger in winter than in summer, which was related to the seasonal variation of the vertical mixing and stratification in the ocean surface layer.  相似文献   

3.
基于ROMS模式的南海SST与SSH四维变分同化研究   总被引：1，自引：0，他引：1  
卫星遥感观测获得了大量高分辨率的海面实时信息，包括海面温度（SST）和海面高度（SSH）等，同化进入数值模式可有效提升模拟精度。本文基于ROMS模式与四维变分同化方法（4DVAR），使用AVHRR SST和AVISO SSH数据，开展了南海区域同化实验。为检验同化的效果，分别利用HYCOM再分析资料和Argo温盐实测数据分析了同化结果的海面高度、流场及温盐剖面的精度。对比结果表明，SST和SSH的同化能够改善ROMS的模拟结果:同化后海面高度场能够更为准确地捕捉海洋的中尺度特征，与HYCOM海面高度再分析资料相比，平均绝对偏差和均方根误差分别为0.054 m和0.066 m；与HYCOM 10 m层流场相比，东向与北向流速平均绝对偏差分别为0.12 m/s和0.11 m/s，相比未同化均提升约0.01 m/s；温盐同化结果与Argo温盐实测具有较高的一致性，温度和盐度平均绝对偏差为0.45℃、0.077，均方根误差为0.91℃、0.11，单个的温盐廓线对比说明，同化结果与HYCOM再分析资料精度相当。  相似文献   

4.
The impact of assimilating Argo data into an initial field on the short-term forecasting accuracy of temper- ature and salinity is quantitatively estimated by using a forecasting system of the western North Pacific, on the base of the Princeton ocean model with a generalized coordinate system （POMgcs）. This system uses a sequential multigrid three-dimensional variational （3DVAR） analysis scheme to assimilate observation da- ta. Two numerical experiments were conducted with and without Argo temperature and salinity profile data besides conventional temperature and salinity profile data and sea surface height anomaly （SSHa） and sea surface temperature （SST） in the process of assimilating data into the initial fields. The forecast errors are estimated by using independent temperature and salinity profiles during the forecasting period, including the vertical distributions of the horizontally averaged root mean square errors （H-RMSEs） and the horizontal distributions of the vertically averaged mean errors （MEs） and the temporal variation of spatially averaged root mean square errors （S-RMSEs）. Comparison between the two experiments shows that the assimila- tion of Argo data significantly improves the forecast accuracy, with 24% reduction of H-RMSE maximum for the temperature, and the salinity forecasts are improved more obviously, averagely dropping of 50% for H-RMSEs in depth shallower than 300 m. Such improvement is caused by relatively uniform sampling of both temperature and salinity from the Argo drifters in time and space.  相似文献   

5.
海洋盐度在水循环、海洋环流、海洋生态系统、全球天气和气候变化等方面起着至关重要的作用。然而, 受观测的限制, 以往对海洋盐度的研究相对匮乏, 对其进行预报的工作更为少见。本文采用线性马尔可夫模型对印度洋海表面盐度(sea surface salinity, SSS)开展初步的预报工作。根据混合层盐度收支方程, 选择海表面高度(sea surface height, SSH)、海表面温度 (sea surface temperature, SST)、SSS等物理量的异常值作为模型的组成部分, 对印度洋SSS开展预报工作。结果表明, 马尔可夫模型可提前9个月对印度洋SSS进行较好的预报。此外, 南太平洋海表面温度异常(sea surface temperature anomaly, SSTA), 海表面高度异常(sea surface height anomaly, SSHA)和印度洋偶极子(Indian Ocean dipole, IOD)系数等遥相关因素的加入可将线性马尔可夫预报对印度洋SSS的预报效果(相关系数)平均提高10%。利用改进的模型对印度洋SSS进行提前1~11个月的“实时”预测, 得出预报的SSS时空变化特征与观测场相吻合。综上所述, 改进的线性马尔可夫模型对印度洋SSS具有一定的预测能力, 未来可进一步完善。  相似文献   

6.
The Localized Weighted Ensemble Kalman Filter(LWEnKF) is a new nonlinear/non-Gaussian data assimilation(DA) method that can effectively alleviate the filter degradation problem faced by particle filtering, and it has great prospects for applications in geophysical models. In terms of operational applications, along-track sea surface height(AT-SSH), swath sea surface temperature(S-SST) and in-situ temperature and salinity(T/S) profiles are assimilated using the LWEnKF in the northern South China ...  相似文献   

7.
Assimilation of satellite-derived surface datasets has been explored in the study. Three types of surface data, namely sea level anomaly, sea surface temperature and sea surface salinity, have been used in various data assimilation experiments. The emphasis has been on the extra benefit arising out of the additional sea level assimilation and hence there are two parallel runs, in one of which sea level assimilation has been withheld. The model used is a state-of-the art ocean general circulation model (OGCM) and the assimilation method is the widely used singular evolutive extended Kalman filter (SEEK). Evaluation of the assimilation skill has been carried out by comparing the simulated depth of the 20°C isotherm with the same quantity measured by buoys and Argo floats. Simulated subsurface temperature and salinity profiles have also been compared with the same profiles measured by Argo floats. Finally, surface currents in the assimilation runs have been compared with currents measured by several off-equatorial buoys. Addition of sea level has been found to substantially improve the quality of simulation. An important feature that has been effectively simulated by the addition of sea level in the assimilation scheme is the near-surface temperature inversion (2-3°C) in the northern Bay of Bengal.  相似文献   

8.
In this study, we evaluate the performance of the recently developed incremental strong constraint 4-dimensional variational (4DVAR) data assimilation applied to the Yellow Sea (YS) using the Regional Ocean Modeling System (ROMS). Two assimilation experiments are compared: assimilating remote-sensed sea surface temperature (SST) and both the SST and in-situ profiles measured by shipboard CTD casts into a regional ocean modeling from January to December of 2011. By comparing the two assimilation experiments against a free-run without data assimilation, we investigate how the assimilation affects the hydrographic structures in the YS. Results indicate that the SST assimilation notably improves the model behavior at the surface when compared to the non-assimilative free-run. The SST assimilation also has an impact on the subsurface water structure in the eastern YS; however, the improvement is seasonally dependent, that is, the correction becomes more effective in winter than in summer. This is due to a strong stratification in summer that prevents the assimilation of SST from affecting the subsurface temperature. A significant improvement to the subsurface temperature is made when the in-situ profiles of temperature and salinity are assimilated, forming a tongue-shaped YS bottom cold water from the YS toward the southwestern seas of Jeju Island.  相似文献   

9.
文章利用果蝇优化广义回归神经网络算法FOAGRNN (fruit fly optimization algorithm, FOA; generalized regression neural network, GRNN)对SODA (simple ocean data assimilation)再分析数据进行训练, 构建海表温度、盐度、海面高度与次表层温盐场之间的投影关系模型, 并在全球范围使用SODA和卫星遥感数据评估了模型的应用性能。首先, 利用独立的2016年SODA海表数据作为模型输入进行理想重构试验, 结果显示全球重构温、盐平均均方根误差(MRMSE)分别为0.36℃和0.08‰, 与世界海洋图集WOA13资料相比减小约50%和60%。然后, 利用卫星观测的海表信息作为模型输入进行实际应用试验, 并与Argo观测剖面进行比较评估。试验结果表明, 重构模型能有效表征海水温、盐特征, 其中重构温、盐MRMSE分别为0.79℃和0.16‰, 相比WOA气候态减小27%和11%。误差的垂向分布显示, 重构温度RMSE从海表向下迅速增大, 至100m达到峰值1.35℃, 而后又迅速回落,至250m处为0.81℃, 跃层往下不断减小; 重构盐度RMSE基本随深度增大而减小, 误差峰值位于25m附近, 约为0.25‰。此外, Argo浮标跟踪分析和区域水团统计结果也表明模型能够较好地刻画海洋三维温盐场的内部结构特征。  相似文献   

10.
The distribution of ocean salinity controls the density field and thereby plays a major role in influencing the ocean dynamics. It has been a challenging task to understand the variability of salinity structure in the regions of large fresh water discharge and high precipitation such as Bay of Bengal (BoB). Recent advancement in satellite technology has made possible the measurement of sea surface salinity (SSS). Aquarius is the satellite which measured the global SSS for the period 2011 to 2015. In the present study, we assimilated Aquarius SSS in the Global Ocean Data Assimilation System based on 3DVAR technique. The assimilation of Aquarius SSS resulted in reduced biases in salinity not only at the surface, but also in the vertical distribution of salinity and better captured the temporal variations of salinity structure in sensitive regions, such as the Bay of Bengal. In addition, the assimilation of SSS showed marginal improvement in ocean thermal structure over data sparse regions of Indian Ocean. It is also shown that the assimilation of Aquarius SSS has improved the stratification in the upper Ocean which is the key factor in the observed improvement in ocean analysis.  相似文献   

11.
本文主要介绍了南海及邻近海域大气-海浪-海洋耦合精细化数值预报系统的研制概况。预报区域为99°E~135°E，15°S~45°N，包括渤海、黄海、东海和南海及其周边海域。为了给耦合预报模式提供较准确的预报初始场，在预报开始之前，分别进行了海浪模式和海洋模式的前24小时同化后报模拟。海浪模式和海洋模式都采用了集合调整Kalman滤波同化方法，海浪模式同化了Jason-2有效波高数据；海洋模式同化了SST数据、MADT数据和ARGO剖面数据。为了改进海洋温度和盐度的模拟，我们在海洋模式的垂向混合方案中引入波致混合和内波致混合的作用。预报系统的运行主要包括两个阶段，首先海浪模式和海洋模式进行了2014年1月至2015年10月底的同化后报模拟，强迫场源自欧洲气象中心的六小时的再分析数据产品。然后耦合预报系统将同化后报模拟的结果作为初始场进行了14个月的耦合预报。预报产品包括大气产品（气温、风速风向、气压等）、海浪产品（有效波高和波向等）、海流产品（温度、盐度和海流等）。一系列观测资料的检验比较表明该大气-海浪-海洋耦合精细化数值预报系统的预报结果较为可靠，可以为南海及周边海洋资源开发和安全保障提供数据和信息产品服务。  相似文献   

12.
In this study, sea surface salinity(SSS) Level 3(L3) daily product derived from soil moisture active passive(SMAP)during the year 2016, was validated and compared with SSS daily products derived from soil Moisture and ocean salinity(SMOS) and in-situ measurements. Generally, the root mean square error(RMSE) of the daily SSS products is larger along the coastal areas and at high latitudes and is smaller in the tropical regions and open oceans. Comparisons between the two types of daily satellite SSS product revealed that the RMSE was higher in the daily SMOS product than in the SMAP, whereas the bias of the daily SMOS was observed to be less than that of the SMAP when compared with Argo floats data. In addition, the latitude-dependent bias and RMSE of the SMAP SSS were found to be primarily influenced by the precipitation and the sea surface temperature(SST). Then, a regression analysis method which has adopted the precipitation and SST data was used to correct the larger bias of the daily SMAP product. It was confirmed that the corrected daily SMAP product could be used for assimilation in high-resolution forecast models, due to the fact that it was demonstrated to be unbiased and much closer to the in-situ measurements than the original uncorrected SMAP product.  相似文献   

13.
A method for combined assimilation of climatic hydrologic fields of temperature, salinity, and the climatic dynamic level of the Black Sea into a model of sea dynamics is proposed. The monthly mean fields of the dynamic sea level were obtained from the results of assimilation of satellite altimetry data into the model. The statistical characteristics of errors in the forecasts of the level, salinity, and temperature were assumed to be proportional to the statistical characteristics of the differences between monthly mean climatic fields of temperature, salinity, and sea level calculated by means of assimilating altimetry observations of the sea level and analogous climatic hydrologic fields. The climatic fields of currents are reconstructed and analyzed. The assimilation of the climatic altimetry level allows the reproduction (in current fields) of quasi-stationary synoptic anticyclonic eddies located along the periphery of the Black Sea Rim Current.  相似文献   

14.
The response of an eddy-permitting ocean model to changes imposed by the use of different mean dynamic topographies (MDT) is analyzed in a multivariate assimilation context, allowing the evaluation of this impact, not only on the surface circulation, but also on the interior ocean representation. The assimilation scheme is a reduced-order sequential Kalman filter (SEEK). In a first set of experiments, high resolution sea surface temperature, along-track sea surface height and sea surface salinity from climatology are assimilated into a 1/3° resolution North and Tropical Atlantic version of the HYCOM model. In a second experiment, in situ profile data are assimilated in addition to the surface measurements.

The first set of experiments illustrates that important differences in the representation of the horizontal model circulation pattern are related to differences in the MDT used. The objective of assimilation is to improve the representation of the 3D ocean state. However, the imperfect representation of the mean dynamic topography appears to be an important limiting factor with regard to the degree of realism obtained in the simulated flow.

Vertical temperature and salinity profiles are key observations to drive a general circulation ocean model toward a more realistic state. The second set of experiments shows that assimilating them in addition to sea surface measurements is a far from trivial exercise. A specific difficulty is due to inconsistencies between the dynamic topography diagnosed from in situ observations and that diagnosed from sea surface height. These two fields obtained from different data sources do not contain exactly the same information. In order to overcome this difficulty, a strategy is proposed and validated.  相似文献   

15.
海洋的盐度观测对于气候和海洋科学的研究有重要的意义,盐度的卫星遥感观测需要估计各种因素带来的误差影响。本文基于海面微波辐射理论和海水相对电容率等模型,采用蒙特卡洛模拟方法研究了在盐度遥感中温度误差、仪器误差以及风速误差对于后续的盐度反演的影响。通过计算温度误差产生的盐度误差,并与敏感性方法的对比发现,在低温低盐时温度误差对盐度反演误差的影响较大,2种方法的偏差较大;而在高温高盐时温度误差对盐度反演误差的影响较小,2种方法的偏差较小。辐射计仪器噪声对盐度误差的影响普遍在0.1psu以上,在低温低盐时可达0.5psu以上。风速误差对盐度反演误差的影响在水平极化状态下随入射角增大,在温度低于20℃时普遍超过1psu;在垂直极化状态下随入射角先减小后增大,在温度低于20℃以及较小的入射角下误差也会超过1psu。对误差的综合分析发现,采用垂直极化状态在高温时这2种误差的影响较小。研究发现,当入射角是45.6°和垂直极化状态下,对于3种典型海面状态(35℃和35psu,20℃和35psu,5℃和30psu),反演的盐度反演误差可达到0.162,0.153和0.444psu,达到了卫星单次扫描对盐度反演的误差要求。  相似文献   

16.
The response of an eddy-permitting ocean model to changes imposed by the use of different mean dynamic topographies (MDT) is analyzed in a multivariate assimilation context, allowing the evaluation of this impact, not only on the surface circulation, but also on the interior ocean representation. The assimilation scheme is a reduced-order sequential Kalman filter (SEEK). In a first set of experiments, high resolution sea surface temperature, along-track sea surface height and sea surface salinity from climatology are assimilated into a 1/3° resolution North and Tropical Atlantic version of the HYCOM model. In a second experiment, in situ profile data are assimilated in addition to the surface measurements.

The first set of experiments illustrates that important differences in the representation of the horizontal model circulation pattern are related to differences in the MDT used. The objective of assimilation is to improve the representation of the 3D ocean state. However, the imperfect representation of the mean dynamic topography appears to be an important limiting factor with regard to the degree of realism obtained in the simulated flow.

Vertical temperature and salinity profiles are key observations to drive a general circulation ocean model toward a more realistic state. The second set of experiments shows that assimilating them in addition to sea surface measurements is a far from trivial exercise. A specific difficulty is due to inconsistencies between the dynamic topography diagnosed from in situ observations and that diagnosed from sea surface height. These two fields obtained from different data sources do not contain exactly the same information. In order to overcome this difficulty, a strategy is proposed and validated.  相似文献   

17.
In order to improve the ocean forecasting in the North Sea and Baltic Sea, an assimilation scheme based on a bottom-topography-dependent anisotropic recursive filter has been used in this study. This scheme can stretch or flatten the shape of a local representative contour surface of the background error covariance function into the form of an ellipse. Furthermore, the computing efficiency has been largely improved due to implicit computation of the background error covariance. A two-month experiment has been used for verifying the impact of assimilating ocean profile observations on ocean forecasting. The results indicate that the use of temperature and salinity profiles can largely improve the oceanic forecasting. The root mean square differences between the forecasts and observations for temperature and salinity have been reduced by 36% and 18% in the experiment period, respectively. Moreover, it is found that the anisotropic recursive filter approach is especially efficient in areas with complex coastlines and sharp fronts, e.g., inner Danish waters. The results also show that the propagation of observation information from an observation position to its neighboring grid points is closely related to currents.  相似文献   

18.
A 1/8° global version of the Navy Coastal Ocean Model (NCOM) is used for simulation of upper-ocean quantities on interannual time scales. The model spans the global ocean from 80°S to a complete Arctic cap, and includes 19 terrain-following σ- and 21 fixed z-levels. The global NCOM assimilates three-dimensional (3D) temperature and salinity fields produced by the Modular Ocean Data Assimilation System (MODAS) which generates synthetic temperature and salinity profiles based on ocean surface observations. Model-data intercomparisons are performed to measure the effectiveness of NCOM in predicting upper-ocean quantities such as sea surface temperature (SST), sea surface salinity (SSS) and mixed layer depth (MLD). Subsurface temperature and salinity are evaluated as well. An extensive set of buoy observations is used for this validation. Where possible, the model validation is performed between year-long time series obtained from the model and time series from the buoys. The statistical analyses include the calculation of dimensionless skill scores (SS), which are positive if statistical skill is shown and equal to one for perfect SST simulations. Model SST comparisons with year-long SST time series from all 83 buoys give a median SS value of 0.82. Model subsurface temperature comparisons with the year-long subsurface temperature time series from 24 buoys showed that the model is able to predict temperatures down to 500 m reasonably well, with positive SS values ranging from 0.18 to 0.97. Intercomparisons of MLD reveal that the model MLD is usually shallower than the buoy MLD by an average of about 15 m. Annual mean SSS and subsurface salinity biases between the model and buoy values are small. A comparison of SST between NCOM and a satellite-based Pathfinder data set demonstrates that the model has a root-mean-square (RMS) SST difference of 0.61 °C over the global ocean. Spatial variations of kinetic energy fields from NCOM show agree with historical observations. Based on these results, it is concluded that the global NCOM presented in this paper is able to predict upper-ocean quantities with reasonable accuracy for both coastal and open ocean locations.  相似文献   

19.
A primitive equation model and a statistical predictor are coupled by data assimilation in order to combine the strength of both approaches. In this work, the system of two-way nested models centred in the Ligurian Sea and the satellite-based ocean forecasting (SOFT) system predicting the sea surface temperature (SST) are used. The data assimilation scheme is a simplified reduced order Kalman filter based on a constant error space. The assimilation of predicted SST improves the forecast of the hydrodynamic model compared to the forecast obtained by assimilating past SST observations used by the statistical predictor. This study shows that the SST of the SOFT predictor can be used to correct atmospheric heat fluxes. Traditionally this is done by relaxing the model SST towards the climatological SST. Therefore, the assimilation of SOFT SST and climatological SST are also compared.  相似文献   

20.
为了建立高精度的海洋表面盐度预测模型,采用BP神经网络的方法,针对SMOS卫星level 1C级亮度温度数据和辅助数据建立了一种海表面盐度预测模型,以ARGO浮标观测值作为海表盐度实测值来检验新模型预测结果的准确度,同时利用验证集对模型的精度进行验证。结果表明:通过新模型预测的海表盐度(SSS0)比SMOS卫星的3个粗糙度模型盐度产品(SSS1,SSS2,SSS3)精度高;SSS0,SSS1,SSS2,SSS3与ARGO浮标实测盐度(SSS ARGO)的均方根误差分别为0.8473,2.0417,2.0288和2.0805,平均绝对误差分别为0.7553,1.4226,1.4216和1.4566,SSS0与SSS ARGO的均方根误差和绝对平均误差值都明显小于SSS1,SSS2和SSS3与SSS ARGO的;由此可见,建立的海表盐度预测模型精度较高。新模型为海表盐度的反演算法提供了新思路。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号