共查询到20条相似文献，搜索用时 78 毫秒
1.
对南迦巴瓦地区雅鲁藏布江蛇绿混杂岩带内旁辛蛇绿岩中变基性岩的地球化学特征进行研究后,发现该基性岩为玻安岩,具有SiO2>53%,镁指数(Mg#)>0.6,难熔元素(Cr、Co和Ni)明显富集,而高场强元素(Nb、Zr、Ti和Y)亏损等玻安岩所具有的典型地球化学特征。旁辛蛇绿岩中玻安岩的主要地球化学特征不仅能与世界著名的玻安岩进行对比,而且也能与雅鲁藏布江蛇绿岩带的日喀则和得几蛇绿岩中的玻安岩进行对比。因此,可以认为南迦巴瓦地区雅鲁藏布江蛇绿混杂岩形成于岛弧环境。 相似文献
2.
对南迦巴瓦地区雅鲁藏布江蛇绿混杂岩带内旁辛蛇绿岩中变基性岩的地球化学特征进行研究后,发现该基性岩为玻安岩,具有SiD2＞53%,镁指数(Mg#)＞0.6,难熔元素(Cr、Co和Ni)明显富集,而高场强元素(Nb、Zr、Ti和Y)亏损等玻安岩所具有的典型地球化学特征.旁辛蛇绿岩中玻安岩的主要地球化学特征不仅能与世界著名的玻安岩进行对比,而且也能与雅鲁藏布江蛇绿岩带的日喀则和得几蛇绿岩中的玻安岩进行对比.因此,可以认为南迦巴瓦地区雅鲁藏布江蛇绿混杂岩形成于岛弧环境. 相似文献
3.
藏东南迦巴瓦地区雅鲁藏布江蛇绿混杂岩中玻安岩的地球化学特征和地质意义 总被引：7，自引：4，他引：7
对南迦巴瓦地区雅鲁藏布江蛇绿混杂岩带内旁辛蛇绿岩中变基性岩的地球化学特征进行研究后,发现该基性岩为玻安岩,具有SiD2＞53%,镁指数(Mg#)＞0.6,难熔元素(Cr、Co和Ni)明显富集,而高场强元素(Nb、Zr、Ti和Y)亏损等玻安岩所具有的典型地球化学特征.旁辛蛇绿岩中玻安岩的主要地球化学特征不仅能与世界著名的玻安岩进行对比,而且也能与雅鲁藏布江蛇绿岩带的日喀则和得几蛇绿岩中的玻安岩进行对比.因此,可以认为南迦巴瓦地区雅鲁藏布江蛇绿混杂岩形成于岛弧环境. 相似文献
4.
蛇绿岩是造山带研究的关键问题之一, 文章在野外地质调查的基础上, 通过岩石学、同位素年代学、地球化学等综合研究, 认为东秦岭丹凤地区分水岭蛇绿岩是与俯冲带相关的SSZ型蛇绿岩。其中的变玄武岩是产于弧前构造环境的玻玄岩, 它具有较玻安岩稍低的SiO2含量, 同时具有高MgO(9.24%~18.74%)和Mg#(74~85)、低TiO2(0.15%~0.38%)和球粒陨石标准化稀土元素配分曲线呈“U”型及相容元素Ni、Cr丰度较高, 高场强元素(HFSE)Y、V、Zr、Yb丰度较低等地球化学特征。变辉长岩的LA-ICP-MS锆石U-Pb年龄表明分水岭蛇绿岩形成于(499.7±6.1) Ma, 玻玄岩的存在暗示着此时的古商丹洋强烈向北俯冲, 在洋内俯冲带和北秦岭南缘之间形成了与俯冲带相关的SSZ型蛇绿岩, 进一步补充完善了秦岭造山带的地质演化历史。 相似文献
5.
西昆仑库地蛇绿岩的构造背景:来自玻安岩系岩石的新证据 总被引：12，自引：2，他引：12
通过对依莎克群火山岩的地球化学研究，首次在西昆仑库地蛇绿岩中发现了玻安岩系岩石。这些岩石具有高SiO2、低TiO2、高Al2O3/TiO2比值和高Cr含量，亏损Y和REE，呈现轻稀土富集的分布模式以及相对低的Ti/Zr比值和高的Zr/Y比值。其中一些样品还具有相当于MORB的Nb、Ta含量和相应较小的La/Nb比值，表明在其形成过程中可能有富集地幔端员的介入。玻安岩系岩石的发现以及火山地层序列的岩性变化表明，依落克群火山岩形成于初始的大洋岛弧或弧后盆地拉张的早期阶段，火山岩的地球化学组成变化以及玻安岩在依莎克群火山序列中的位置表明，原特提斯的消减方向应当是向北的。 相似文献
6.
《地球学报》2015,(4)
蛇绿岩是造山带研究的关键问题之一,文章在野外地质调查的基础上,通过岩石学、同位素年代学、地球化学等综合研究,认为东秦岭丹凤地区分水岭蛇绿岩是与俯冲带相关的SSZ型蛇绿岩。其中的变玄武岩是产于弧前构造环境的玻玄岩,它具有较玻安岩稍低的Si O2含量,同时具有高Mg O(9.24%~18.74%)和Mg#(74~85)、低Ti O2(0.15%~0.38%)和球粒陨石标准化稀土元素配分曲线呈"U"型及相容元素Ni、Cr丰度较高,高场强元素(HFSE)Y、V、Zr、Yb丰度较低等地球化学特征。变辉长岩的LA-ICP-MS锆石U-Pb年龄表明分水岭蛇绿岩形成于(499.7±6.1)Ma,玻玄岩的存在暗示着此时的古商丹洋强烈向北俯冲,在洋内俯冲带和北秦岭南缘之间形成了与俯冲带相关的SSZ型蛇绿岩,进一步补充完善了秦岭造山带的地质演化历史。 相似文献
7.
新疆塔克札勒蛇绿混杂岩中玄武质熔岩地球化学特征及其成因讨论 总被引：4，自引：3，他引：1
塔克札勒蛇绿混杂岩玄武岩的SiO2 和MgO高,同时较富集Cr、Ni及Co等过渡族元素,具有玻安岩特征;微量元素以富集LILE(Ba,Rb,Sr等)而亏损HFSE(Nb、Ta、Zr、Hf等)为特征;该玄武岩具LREE平坦或弱亏损、HREE亏损的分配型式;构造环境判别图解指示该玄武岩形成于弧前环境。地球化学特征与其它地质特征表明该蛇绿岩代表了古亚洲洋消亡过程中的洋壳残片。 相似文献
8.
云南金平晚二叠纪玄武岩特征及其与峨眉地幔柱关系——地球化学证据 总被引：17，自引：4，他引：17
分布于哀牢山－红河断裂带西南侧的金坪上二叠统玄武岩属于低钛拉斑玄武岩（LT）（Ti/Y＜500）。其地球化学特征总体与洋岛玄武岩（OIB）相似，根据其岩相学、主量元素，微量元素特征，将其划分为LT1和LT2两个地球化学亚类型，它们的分布和主要地球化学标志为：LT1分布于下部，高Mg^#(48-63),SiO2(50%-56%)，高∑REE(118-145μg/g）、低Fe2O3（1．36％－1．63％），Na2O(1.88%-3.17%)，TiO2(1.37%-1.92%)，高Th、U，低Nb,Ta和Sr负异常；LT2分布于上部，低SiO2(47%-56%)，Sr强负异常，二者地球化学特征的差异是同一母岩浆经不同的分离结晶和同化混染作用的结果，金平与宾川峨眉山的化学地层学对比表明，金平LT1和LT2玄武岩与宾川峨眉山玄武岩下部的LT1、LT2十分相似，它们可能是同时，或在类似的环境下形成，金平玄武岩属于峨眉山大火山岩省的一部分，同为峨眉地幔柱早期活动的产物。新生代哀牢山－红河断裂的左滑剪运动导致了宾川与金平玄武岩的错位。 相似文献
9.
西藏丁青弧前蛇绿岩的地球化学特征 总被引：9，自引：4，他引：9
丁青蛇绿岩位于班化湖－丁青－怒江蛇绿岩带的东段，其地幔岩出露规模是该带中最大的。本文报道的丁青蛇绿岩主要由地幔橄榄岩、堆晶岩、辉长岩和斜长花岗岩组成。蛇绿岩剖面上覆硅岩中的放射虫化石是早株罗世和晚三叠世诺利克期的，中侏罗统砂岩和砾岩不整合覆盖在蛇绿岩之上，由此确定丁青蛇绿岩是晚三叠－早侏罗世的，在中株罗世之前侵位，丁青蛇绿岩属于玻安岩系，玻安岩的特点是富Si、Mg和大离子亲石元素（LILE），贫高场强元素（Ti、P、Zr、Y、Yb和Nb）。丁青蛇绿岩的堆晶岩、辉长岩和辉绿岩均具“U”型REE分布，暗示丁青玻安岩是由于亏损的地幔源岩和来自消减带的水和流体两组分的混合形成的。丁青玻安岩的地球化学特征类似西太平洋第三纪玻安岩，而明显不同于MORB的地球化学性质， 表明丁青玻安岩应当形成于洋内岛弧的弧前环境，属于弧前蛇绿岩。 相似文献
10.
新疆北部晚古生代埃达克岩、富铌玄武岩组合：古亚洲洋板块南向俯冲的证据 总被引：50，自引：0，他引：50
地球化学研究结果表明，新疆北部富蕴县境内的晚古生代下泥盆统托让格库都克组的安山质岩石具有与埃达克岩非常相似的地球化学特征，它们具有较高的Al2O3，Na2O和Sr含量以及Sr/Y比值；明显亏损重稀土和Y，它们的MORB标准化微量元素蛛网图表现为明显的Nb，Ta负异常和Sr正异常，同时强烈亏损高场强元素。与埃达克岩共生的玄武岩的地球化学特征则与富铌玄武岩一致，表现为Si过饱和及富Na的特征，同时具有较高的Nb，TiO2和P2O5含量，并富集高场强元素。由于埃达克岩和富铌玄武岩的形成均与板块俯冲有关，因此，它们的存在表明，古亚洲洋在早-中泥盆世向南(哈萨克斯坦-准噶尔板块)发生了一次洋壳俯冲作用。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
14.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
16.
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献
19.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献
20.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献