共查询到20条相似文献，搜索用时 78 毫秒
1.
松潘造山带马尔康强过铝质花岗岩的成因及其构造意义 总被引：2，自引：0，他引：2
松潘造山带广泛出露印支期后碰撞型花岗岩类, 其中包括埃达克质花岗岩类、A型花岗岩和I型花岗岩, 但目前人们对该区印支期强过铝质花岗岩尚未有深入的研究.松潘造山带马尔康花岗岩属于强过铝质花岗岩(A/CNK=1.10~1.20), 其岩石类型主要为中粒二云母花岗岩和中细粒二云母花岗岩.利用LA-ICP-MS锆石U-Pb定年方法, 获得中粒二云母花岗岩的岩浆结晶年龄为208±2Ma, 中细粒二云母花岗岩的岩浆结晶年龄为200±2Ma.马尔康强过铝质花岗岩K2O/Na2O=1.13~1.75, 富Rb、Th和U, 贫Sr、Ba、Co和Ni等元素; 稀土元素组成上显示存在强到中等的负Eu异常(Eu/Eu*=0.15~0.65);全岩初始87Sr/86Sr比值(ISr) 为0.70712~0.71137, εNd (t) =-10.36~-8.43, 锆石εHf (t) =-11.8~-1.1.地球化学和Sr-Nd-Hf同位素组成一致表明, 它们的岩浆来自于地壳物质的部分熔融, 其中中粒二云母花岗岩的源岩类型主要为地壳中的泥质岩类, 而中细粒二云母花岗岩的源岩主要为地壳中的杂砂岩类.结合松潘带的地质背景、区域构造-岩浆事件及其岩浆岩的组合分析, 印支期岩石圈拆沉作用可以用来解释马尔康强过铝质花岗岩的形成机制.在松潘带, 印支期岩石圈拆沉作用导致软流圈物质上涌, 这不仅促使了加厚下地壳物质发生部分熔融, 如松潘带印支期埃达克质和I型花岗岩浆的形成, 而且还诱发了中地壳物质的部分熔融, 如马尔康强过铝质花岗岩的形成.这表明松潘带印支期岩石圈拆沉作用已使地壳不同层次发生部分熔融作用. 相似文献
2.
藏南错那淡色花岗岩LA-MC-ICP-MS锆石U-Pb年龄、岩石地球化学及其地质意义 总被引：10，自引：1，他引：9
藏南错那淡色花岗岩位于喜马拉雅造山带的东部。对其进行LA-MC-ICP-MS锆石U-Pb定年,结果显示,结晶年龄为17.7±0.3Ma,代表中新世的地壳深熔作用。淡色花岗岩样品具有高的Si O2(74.46%~75.57%)、Al2O3(14.07%~14.64%)和K2O(4.19%~4.85%)含量,高的K2O/Na2O值(1.09~1.31)和A/CNK值(1.15~1.25),富集Rb、Th和U,亏损Ba、Nb、Sr、Zr等元素,显示高的Rb/Sr值(17.75~29.50)和强烈的负Eu异常(δEu=0.18~0.26),属于壳源成因的高钾钙碱性过铝质S型花岗岩。样品具有高的Isr值(0.78982~0.79276)和低的εNd(t)值(-19.5~-18.2),可与大喜马拉雅结晶杂岩(GHC)中的变泥质岩对比,暗示其来自变泥质岩的部分熔融。样品的Isr值较高,而Sr浓度较低,且随着Ba浓度的增加,Rb/Sr值逐渐降低,表明淡色花岗岩是无水条件下白云母部分熔融的产物,部分熔融可能与藏南拆离系(STDS)伸展拆离导致的构造减压有关。错那淡色花岗岩的形成反映了地壳伸展减薄背景下,构造减压导致的中下地壳中含水矿物脱水熔融,并沿STDS上升侵位的动力学过程。 相似文献
3.
藏南吉隆淡色花岗岩体位于大喜马拉雅淡色花岗岩带的中部,是吉隆地区藏南拆离系剪切带上部的重要组成部分。地球化学特征显示,岩石具有高SiO_2(72.09%~74.02%)、Al_2O_3(14.54%~15.59%)和K_2O(4.55%~5.59%)含量,高K_2O/Na_2O比值(1.12~1.55)和A/CNK值(1.14~1.18),属于高钾钙碱性过铝质S型花岗岩。富集大离子亲石元素Rb和放射性生热元素U,亏损Ba、Nb、Sr和Zr等元素,具有明显的轻重稀土元素分异和Eu负异常(δEu=0.37~0.54)。具有高的Rb/Sr比值(3.6~9.7)和低的CaO/Na_2O比值(0.15~0.25),指示源区为泥质岩区;(~(87)Sr/~(86)Sr)_i和ε_(Nd)(t)变化范围分别为0.7548~0.7586和-14.0~-13.1,与大喜马拉雅变泥质岩的Sr-Nd同位素组成一致;锆石边部的ε_(Hf)(t)介于-16.0~-8.5之间,位于大喜马拉雅变泥质岩中碎屑锆石的演化线上,表明淡色花岗岩的源岩为大喜马拉雅变泥质岩。岩石(~(87)Sr/~(86)Sr)_i较高而Sr浓度较低,且随着Ba浓度的增加,Rb/Sr比值降低,表明淡色花岗岩是无水条件下白云母脱水熔融形成的,部分熔融可能与藏南拆离系(STDS)伸展拆离导致的深部构造减压密切相关。吉隆淡色花岗岩的形成反映了地壳伸展减薄背景下,构造减压导致的深部地壳物质中含水矿物(白云母)脱水熔融并沿向北伸展的STDS侵位的构造动力学过程。 相似文献
4.
塔山岩体位于华南造山带北缘,形成于晚三叠世。自早至晚由粗中-中粒斑状二云母二长花岗岩、中细粒-细粒斑状二云母二长花岗岩、细粒二云母二长花岗岩组成,具块状构造。岩石具有高硅(SiO2=71.57%~75.01%)、富铝(Al2O3=13.92%~15.51%)、中钾(K2O=3.51%~5.20%)、中碱(Na2O+K2O=6.89%~8.62%)、高ASI(1.12~1.52)的特征,总体属铁质、高钾钙碱性系列强过铝质花岗岩类。微量元素中Ba、Nb、Sr、Ti表现为明显亏损,Rb、(Th+U+K+Ta)、(La+Ce)、Nd、(Zr+Hf+Sm)、(Y+Yb+Lu)等则相对富集。稀土总量较低(17.9~184.0μg/g),轻稀土富集((La/Yb)N=2.52~17.89),具明显的负Eu异常(δEu=0.17~0.37)。岩体具有较高的ISr值(0.73271和0.72739)和较低的εNd(t)值(-11.05和-10.82),两阶段Nd模式年龄(t2DM)为1.87 Ga和1.89 Ga。C/MF-A/MF图解显示源岩主要为泥质岩石,部分为长英质岩石。强过铝花岗岩样品的Al2O3/Ti O2比值大部分小于100。上述地球化学特征表明塔山岩体为S型花岗岩,源岩主要为中、上地壳酸性岩石。构造环境地球化学判别图解显示为后碰撞构造环境。基于岩石成因、构造环境及构造演化过程,推断继中三叠世后期印支运动陆内强挤压之后,晚三叠世进入挤压松弛的后碰撞环境,地壳减压重熔而形成了塔山岩体。此外,地壳重熔可能还受到软流圈地幔上隆及其热传递的影响。 相似文献
5.
《华东地质》2015,(4)
湘西南苗儿山地区早燕山期花岗岩形成于晚侏罗世早期,侵入于加里东期花岗岩(构成苗儿山岩体主体)和印支期花岗岩中。主要岩石类型为细粒—中粗粒斑状黑云母二长花岗岩,局部发育细粒二云母二长花岗岩。岩石SiO_2为76.02%~80.26%、Al_2O_3为10.94%~12.88%、K2O为3.42%~5.34%、Na_2O+K_2O为5.37%~8.22%、ASI为1.04~1.31(平均1.14),总体属铁质、钙碱性系列过铝质花岗岩类。微量元素中Ba、Sr、P、Ti表现为强烈亏损,Rb、(Th+U+K)、(La+Ce)、Nd、(Zr+Hf+Sm)、(Y+Yb+Lu)等相对富集。稀土总量较低(122.9~175.4μg/g),轻稀土略富集((La/Yb)N=2.55~3.79),具明显的负Eu异常(δEu=0.07~0.22)。岩体ISr值为0.99007和1.15860,εNd(t)值为-9.20和-8.80,两阶段Nd模式年龄(t2DM)为~1.7Ga。C/MF-A/MF图解显示源岩主要为变质泥质岩和变质杂砂岩。强过铝花岗岩样品的Al_2O_3/TiO_2比值部分100。上述地球化学特征表明花岗岩为S型花岗岩,源岩主要为中、上地壳酸性岩石,并有少量地幔物质加入。花岗岩主量和微量元素构造环境判别图解以及区域构造演化过程表明花岗岩形成于后造山构造环境,岩浆形成与先期(中侏罗世)陆壳增厚升温及软流圈地幔的热传递有关。 相似文献
6.
腾冲地块梁河早始新世花岗岩成因机制及其地质意义 总被引：1，自引：0，他引：1
腾冲地块梁河地区芒东和青木寨花岗岩是新特提斯洋演化过程中重要的壳源岩浆活动产物。岩石形成年龄为48~51Ma,属于早始新世,与腾冲地块西缘盈江地区大量的酸性和基性侵入岩的形成年龄相近。梁河地区的早始新世花岗岩具有高硅、钾的特征,属于准铝质-强过铝质高钾钙碱性S型花岗岩。这些花岗岩具有高的初始~(87)Sr/~(86)Sr比值和富集的Nd同位素组成,Nd模式年龄显示源岩应为中元古代的地壳岩石。同时,芒东花岗岩具有高的CaO/Na_2O和相对低的Al_2O_3/TiO_2、Rb/Sr和Rb/Ba比值,说明源区为变质杂砂岩。而青木寨花岗岩具有低的CaO/Na_2O和Al_2O_3/TiO_2、相对高的Rb/Sr和Rb/Ba比值,指示其源岩以变泥质岩为主。结合区域内中-新生代岩浆活动特征,我们认为芒东和青木寨花岗岩是印度-亚洲大陆东向初始碰撞或同碰撞时期挤压背景下,腾冲地块中下地壳成熟度较低的杂砂岩以及成熟度较高的泥岩在高温条件下部分熔融的产物。 相似文献
7.
扬子板块西缘石棉安顺场新元古代钾长花岗岩地球化学特征及其地质意义 总被引：3，自引：0，他引：3
扬子板块西缘新元古代岩浆活动强烈,其成因研究对探讨Rodinia超大陆的演化有着重要意义。本文对石棉安顺场钾长花岗岩形成年龄及其地球化学特征研究,结果表明锆石~(206)Pb/~(238)U年龄加权平均值为777.3±4.8 Ma(MSWD=0.23,2σ),代表花岗岩的结晶年龄。岩石SiO_2含量高(72.64%~76.27%),铝饱和指数A/CNK大于1(1.06~1.24),K_2O/Na_2O在1.40~2.22之间,里特曼指数σ小于3.3(2.08~2.74)。岩石轻稀土元素(LREE)富集,Nb、Ta轻微亏损,Eu负异常明显(δEu=018~0.23)。岩石的ε_(Nd)(t)为0.5~3.3(平均值为2.1),T_(DM)在1.19~1.61Ga之间,反映其源区以古老地壳物质为主。铅的初始同位素比值分别为[n(~(206)Pb)/n(~(204)Pb)]i=15.4103~17.2707,[n(~(207)Pb)/n(~(204)Pb)]i=15.4265~15.5479,[n(~(208)Pb)/n(~(204)Pb)]i=33.3518~35.8641。此外,岩石具有高的Rb/Sr比值和低的Ca O/Na2O比值、较低的Al_2O_3/TiO_2比值和低的Rb/Ba比值,表明其起源于泥质岩石的部分熔融。综合地球化学、同位素特征和区域地质资料,我们认为石棉安顺场钾长花岗岩为过铝质高钾钙碱性S型花岗岩,它是地壳泥质源岩部分熔融的产物,形成于挤压的构造环境中。 相似文献
8.
川西扎乌龙花岗伟晶岩型稀有金属矿床白云母花岗岩岩石地球化学特征 总被引：8，自引：0，他引：8
扎乌龙花岗伟晶岩型稀有金属矿床位于四川西部石渠县呷依乡,矿区出露的白云母花岗岩岩体与含稀有金属伟晶岩脉有密切的时空关系及成因联系。本文对采自扎乌龙白云母花岗岩岩体的新鲜样品进行了全岩岩石地球化学分析,结果表明,该岩体岩石富硅(Si O_2=73.49%~74.78%)、富铝(Al_2O_3=14.37%~14.83%)、高钾(K_2O/Na_2O=1.14~1.91),贫Fe、Mg、Ti,里特曼指数(σ)3.3,铝饱和指数和Al_2O_3/Ti O_2(100)较高。以上特征表明该岩体属高压型高钾钙碱性强过铝质花岗岩。微量元素表现出Rb、U等正异常和Ba、Sr、Zr、Ti等负异常的特征;岩石稀土总量较低,具有明显的轻稀土富集,重稀土亏损的特征,且由于较明显的负铕异常(δEu=0.36~0.53)而呈现"V"型谷状。岩石高Rb/Sr(2.08~6.51)和Rb/Ba(1.53~3.26)、低Ca O/Na_2O(0.3)等地球化学特征,表明其来源于三叠系西康群泥质岩的脱水熔融,是同碰撞造山作用的产物。而扎乌龙式LCT型花岗伟晶岩,主要是由造山过程中变泥质岩部分熔融形成的强过铝质岩浆逐步演化而形成。 相似文献
9.
藏南冲巴淡色花岗岩的地球化学特征、成因机制及其构造动力学意义 总被引：2，自引：0，他引：2
《地学前缘》2016,(1):264-275
冲巴淡色花岗岩位于大喜马拉雅淡色花岗岩带的东部,岩石地球化学研究结果显示,其具有高的SiO2(73.87%~74.95%)、Al2O3(14.20%~14.74%)和K2O(4.44%~4.89%),高的K2O/Na2O比值(1.19~1.42)和A/CNK比值(1.18~1.22),富集Rb、Th和U,亏损Ba、Nb、Sr和Zr,具有强烈的负Eu异常(δEu=0.27~0.37),属于高钾钙碱性过铝质S型花岗岩。冲巴淡色花岗岩具有较高的Rb/Sr比值(2.6~8.6),低的CaO/Na2O比值(0.18~0.20),指示源区可能为泥质岩区,(87 Sr/86 Sr)i和εNd(t)值分别为0.763 199~0.778 799和-16.7~-16.3,与大喜马拉雅结晶杂岩(GHC)中变泥质岩一致,表明其来自GHC变泥质岩的部分熔融。淡色花岗岩具有高的(87Sr/86Sr)i而低的Sr含量,且随着Ba含量增加,Rb/Sr比值降低。这些特征表明,冲巴淡色花岗岩是无水条件下变泥质岩发生白云母脱水熔融的产物,部分熔融可能与STDS伸展拆离导致的构造减压密切相关。 相似文献
10.
南岭西段加里东期苗儿山岩体锆石SHRIMPU-Pb年龄、地球化学特征及其构造意义 总被引：1，自引：0，他引：1
苗儿山岩体位于南岭西段,主体为加里东期花岗岩,少量印支期和早燕山期花岗岩。加里东期花岗岩具块状构造,由早期黑云母花岗闪长岩、中期斑状黑云母二长花岗岩和晚期细粒黑(二)云母二长花岗岩组成,以斑状黑云母二长花岗岩为主。对中期斑状黑云母二长花岗岩和晚期细粒二云母二长花岗岩各进行了1个样品的锆石SHRIMP U-Pb年龄测试,分别得到428.5±3.8 Ma、409±4 Ma的年龄值,反映出早志留世末、志留纪末-泥盆纪初2期岩浆事件。中期主体花岗岩具有富硅(SiO2=70.09%~76.59%)、中铝(Al2O3=12.71%~14.72%)、高钾(K2O=4.48%~5.73%)、中碱(Na2O+K2O=7.24%~7.91%)、高ASI(平均1.15)的特点,总体属高钾钙碱性系列过铝质花岗岩类。主体花岗岩微量元素中Ba、Nb、Sr、P、Ti表现为明显亏损,Rb、(Th+U+K)、(La+Ce)、Nd、(Zr+Hf+Sm)、(Y+Yb+Lu)等则相对富集,稀土总量中等(179.8×10-6~270.6×10-6),轻稀土富集[(La/Yb)N=5.07~14.33],具明显的负Eu异常(δEu=0.15~0.46)。岩体具有较高的ISr值(0.70660~0.72082)和较低的εNd(t)值(-8.29~-7.94),两阶段Nd模式年龄(t2DM)为1.81~1.84 Ga。C/MF-A/MF图解显示源岩为变质泥质岩和碎屑岩。上述地球化学特征表明花岗岩为S型花岗岩,源岩主要为中、上地壳岩石。花岗岩氧化物和微量元素构造环境判别图解指示岩体形成于后碰撞构造环境。基于岩石成因、构造环境判别以及区域构造演化过程,推断加里东期苗儿山花岗岩的具体形成机制为:在陆内强挤压之后挤压应力相对松弛、压力降低的后碰撞构造环境下,因地壳增厚而升温的中、上地壳岩石减压熔融并向上侵位。结合区域资料分析,苗儿山地区在奥陶纪末-志留纪初北流运动和志留纪后期的广西运动中均产生过强烈的陆内挤压和地壳增厚。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
14.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
16.
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献
19.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献
20.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献