共查询到20条相似文献，搜索用时 218 毫秒
1.
Several methods have been employed to install the different types of subsea equipment that are required for offshore oil and gas production systems. More recently, the increasing development of oil fields at remote, ultra-deepwater scenarios has been requiring heavier and more complex subsea equipment. In such scenarios the usual installation methods have been facing increasing challenges, including resonance effects associated to the dynamic behavior of the cable-equipment system. In this context, after presenting a review of the state-of-the-art of installation methods for subsea equipment, this work presents a methodology for the design and evaluation of an installation method based on the combination of steel wire and polyester ropes. The goal is to obtain a feasible and safe installation method that can avoid resonance effects along all phases of the lowering procedure, without the need of specialized devices such as heave compensators, and using only simpler installation vessels such as standard tugboats instead of more expensive and specialized vessels (such as drilling rigs). The method is evaluated by numerical simulations for case studies considering representative metocean data for Brazilian ultra-deepwater scenarios, following a methodology that considers the random characteristic of actual sea states by employing an irregular spectral representation. The results indicate that the method may indeed be feasible for the deepwater installation of heavier equipment, potentially being more cost-effective especially for remote locations where other more complex methods might become inefficient. 相似文献
2.
水下井口的疲劳完整性是海洋油气田长期安全开采的前提。工业界往往采用贴应变片直接测量水下井口应变来计算弯矩和疲劳损伤,但水下井口应变片粘贴困难且不能长时间连续工作。采用对水下井口监测方法,基于隔水管—防喷器组—水下井口的运动和力学特性,考虑防喷器组惯性力矩建立系统耦合动力学方程,最终形成基于监测数据的水下井口循环弯矩计算方法。以南海某深水水下井口为例,建立隔水管—防喷器组—水下井口系统有限元模型并进行动态分析,提取隔水管底部张力、转角、防喷器组加速度及转角等参数,代入所建立的系统耦合动力学模型,得到水下井口弯矩与有限元计算结果吻合良好。研究表明只需通过在线监测获得所需的输入数据,无需监测水下井口应变即可获取水下井口循环弯矩。建立的系统耦合动力学模型可为水下井口疲劳完整性评估提供理论依据。 相似文献
3.
The impact of dropped anchor on submarine photoelectric composite cables may possibly cause electrical faults, i.e. electricity and optical signal transmission failure. In order to study the impact capacity and structural impact failure mechanism, a test setup is designed originally to examine the structural and functional integrity. A detailed finite element model (FEM) is created, considering material nonlinearity and component interaction. A parametric analysis has been performed to predict the deformation of components and impact forces, under different impact velocities and collision directions. Relationships between the armor layer indentation rate and that of internal power and optical units are achieved. The impact deformation of internal entities can be evaluated intuitively by armor layer indentation. The proposed experimental and numerical methods are well correlated, suitable to assess the impact capacity of subsea power cables and assist the protection design of subsea power cables in engineering. 相似文献
4.
非黏结柔性管道作为深水油气开发领域的关键设备,是连接海底井口和海洋平台的主要纽带。海洋油气开发水深已经超过了3 000 m,高静水压力是深水软管设计和安全评价的主要挑战,明确深水柔性管道压溃失效机理,并准确地预测柔性管道的压溃压力可以为柔性管道结构设计和安全评价提供依据,柔性管道的压溃压力与骨架层的几何形状以及骨架层之间复杂的相互作用有关,准确高效地预测压溃压力变得极具挑战性。针对柔性管道失效机理研究和压溃压力预测方法进行了总结,指出当前柔性管道压溃失效分析中薄弱的环节,为我国非黏结柔性管道的结构设计和安全评价提供参考。 相似文献
5.
6.
7.
The search for oil in deeper water depths has generated the need for secure, reliable, low error acoustic control systems in the presence of a highly complex man-made noise-like environment. This paper discusses an acoustical command, control, and telemetering system developed for emergency subsea Blowout Preventer (BOP) operation that has been structured around a unique coding design. The system described has been successfully demonstrated in this acoustic environment at a deployed water depth in excess of 6400 feet (sim 1950 m). 相似文献
8.
新型多功能干树储油半潜平台研发 总被引：1，自引：1，他引：0
针对凝析油气田开发了一型适应我国南海环境条件的深水多功能干树半潜平台,平台运动性能优良,可实现干树开采、回接水下井口、油气生产处理、凝析油存储、钻修井等功能。平台由上部组块、主船体、细长柔性连接结构、垂荡板、顶张紧式立管(TTR立管)系统、系泊系统构成,结构特点为采用细长柔性连接结构连接主船体与箱型垂荡板。垂荡板采用箱型结构,承受作业吃水压力,可实现平台与箱型垂荡板的整体拖航,平台安装简易,细长柔性连接结构可在位维修或更换。平台立柱内设置储油舱存储天然气凝析油,解决凝析油存储外输问题。平台采用成熟系统系统集成,运动性能优良,海上施工风险可控,未来有望成为一种新的深水油气田开发平台型式。 相似文献
9.
Offshore engineers and scientists face fascinating economical and technical challenges in designing offshore platforms for shallow water oil and gas fields in moderate ice conditions. Petroleum production systems in these ice-infested areas such as the Bohai Bay of China, Cook Inlet, Barent Sea, and Caspian Sea must be designed to accommodate the harsh environmental conditions, among which the first-year sea ice is one of the major design consideration. Extreme ice loads and ice-induced vibrations still remain an area of uncertainty in offshore platforms. This paper demonstrates the main technical aspects on the use of jackets in the Bohai Bay, with particular focus on ice loads and the failure modes of slender ice-resistant structures, which are the two key issues in design considerations. A design proposal and some considerations for economical ice-resistant structures for safe development in the cold region are also conceptually discussed. 相似文献
10.
文章以假设发生在南海北部深水油气勘探开发海域的1279m深水井喷溢油事故为例,采用深海溢油输移扩散模型,以2020年冬季（1月）和夏季（7月）三维流场和海面风场为主要环境动力,数值模拟研究未实施和实施海底消油剂处理情景下的溢油在海洋环境中的输移扩散全过程。模拟结果显示:不同深度的海流对溢油输移轨迹有着显著的影响;深水环... 相似文献
11.
A cabled ocean observatory system that can provide abundant power and broad bandwidth communication for undersea instruments is developed. A 10 kV direct current (kVDC) with up to 10 kW power, along with 1 Gigabit/sec Ethernet communication, can be transmitted from the shore to the seafloor through an umbilical armored cable. A subsea junction box is fixed at a cable terminal, enabling the extension of up to nine connections. The box consists of three main pressure vessels that perform power conversion, power distribution, and real-time communication functions. A method of stacking modules is used to design the power conversion system in order to reduce the 10 kV voltage to levels that can power the attached instruments. A power distribution system and an Ethernet communication system are introduced to control the power supply and transmit data or commands between the terminals and the shore station, respectively. Specific validations of all sections were qualified in a laboratory environment prior to the sea trial. The ocean observatory system was then deployed at the coast of the East China Sea along with three in situ instruments for a 14-day test. The results show that this high voltage-powered observatory system is effective for subsea long-term and real-time observations. 相似文献
12.
Subsea production system has been increasingly used in recent South China Sea offshore developments. With deepwater applications, constituent parts of subsea systems become more complicated and enlarged. Increases on the weight and geometry of each component bring challenges to installations. A recent accomplished deployment on a subsea massive jumper shows the weight and length have been up to 120 tons and 90 m, respectively with sophisticated geometry. It is considerably difficult to install heavy and large subsea structures, especially in South China Sea where severe environmental conditions are common. In addition, deepwater deployment may alter natural frequency of the hoisting system and the altered frequency may be close to possible environmental conditions. To deal with the above two issues, traditionally, engineers need to carry out series of complicated numerical analyses which are on case basis and significantly time-consuming. Existing studies focus on the optimization on analysis techniques by conducting laboratory testing and numerical simulations. However, easy-to-use guidance on massive subsea structure installation are somewhat limited. The studies presented in this paper aim to achieve a simplified guidance which can briefly screen the cases subject to axial resonance and provide visible correlations between hoisting system integrity and key installation parameters. 相似文献
13.
适于高温高盐油藏的聚合物性能指标评价 总被引：3，自引：0，他引：3
我国多数油田经过多年注水开发,综合含水已超过90%,而采出程度低于35%,如何提高油田采收率是高含水油田急需解决的难题。目前,聚合物驱油是工业化应用程度最高的一项提高采收率技术,但由于聚合物产品性能差异和油田现场对污水处理的需要,多数聚合物不适宜高温高盐油田的现场驱油试验。本文以胜坨高温高盐油藏的地质条件为依托,在对聚合物驱油效果影响因素分析的基础上,研究了适合于高温高盐油藏强化采油的聚合物性能指标,优选了具有梳形结构的KYPAM聚合物为胜坨油田的驱替剂。该性能指标的提出对国内外高温高盐油藏进行聚合物驱油具有重要的指导意义。 相似文献
14.
介绍了海洋石油钻井设备水下连接器,以H-4型水下连接器在现场使用中出现的故障现象为例,通过对H-4型水下连接器的结构原理的分析,分析在现场使用连接器发生脱不开故障的原因,并根据原因介绍了其预防的措施;旨在为海洋浮式钻井平台现场使用水下连接器作业提供借鉴和指导作用. 相似文献
15.
An industry accepted standard does not currently exist for determination of compression limits in a subsea cable. This has resulted in most manufacturers specifying that subsea cables are not permitted to be axially loaded in compression.Additionally industry guidance does not exist regarding the consequences of inducing compression forces within subsea cables and the resulting effect on cable integrity. Industry recommended practice and guidance also does not have any information regarding experimental test arrangements to determine allowable compression levels within a subsea cable. This lack of modelling/testing guidance along with manufacturer recommendations of zero compressive loads within subsea cables results in overly conservative and restrictive design parameters for subsea cable installation and use.Due to the complex interaction within a subsea cable structure, such as contact interaction and friction between cable strands, theoretical modelling has been unable to provide reliable stress predictions and therefore an experimental testing regime is required if compression limits within the cable are to be appropriately determined. This paper describes combined axial and bending test arrangements that can be used as a guideline for determination of allowable compression limits for subsea cables. 相似文献
16.
在滩海油田首次进行海底注水管道的铺设、受其结构等因素的影响,其施工工艺及技术性远比海底输出管道更复杂,难度更大。本文介绍了滩海油田海底注水管道的施工工艺,并对接口内防腐技术,底拖法海管拖运技术、海上接口技术及立管吊装技术做了详细的阐述。 相似文献
17.
主电站作为海洋石油开采平台最重要的核心组成，为整个平台提供动力来源，是保证平台能够正常运转的心脏器官。从机组类型、特点，以及相应的工作原理等几个方面对海洋石油开采平台上的主电站作了简要的描述；依据相关基础数据，结合锦州25—1南油气田的特点，对油气田进行了电负荷分析，得出油气田设计所需要的典型电负荷量以及相关的数据；通过对机组容量、负荷率、备用率、机组占用平台面积、机组重量等几个参数的比对，从往复式发动机电站机组和燃气透平机电站机组中优选出了主电站机组方案。通过对锦州25—1南油气田主电站方案优选的详细阐述，为海洋石油开采平台主电站的选型设计提供参考和借鉴。 相似文献
18.
为深入研究井喷和管道破损等海底事故后溢油在水下环境中的输移扩散过程，文章利用自制的组合式环形水槽（周长9.7 m、宽0.45 m、深1 m），以阿曼原油与消油剂混合物和淡水（含示踪剂）为模拟污染物，初步开展静水和动水环境中海底溢油浮射流的物理模拟实验，并应用基于拉格朗日积分方法的水下溢油浮射流模型进行数值模拟比较分析。研究结果表明:静水环境中，水下溢油浮射流主要沿喷口的垂直中心线向水面输移扩散；非均匀流动水环境中，横流速度越大，浮射流输移轨迹的弯曲程度越明显；数值模拟的浮射流轨迹总体上与实验观测结果符合较好；研究结果可为今后相关物理实验和数值模型的改进研究提供有益参考。 相似文献
19.
20.
El-Sharkawi M.A. Upadhye A. Shuai Lu Kirkham H. Howe B.M. McGinnis T. Lancaster P. 《Oceanic Engineering, IEEE Journal of》2005,30(1):232-240
The objective of the North East Pacific Time-Integrated Undersea Networked Experiments (NEPTUNE) is to establish a permanent, subsea observatory surrounding the Juan de Fuca tectonic plate. To achieve this objective, a special power distribution system is designed to provide continuous power to science equipment, vehicles, and laboratories located as deep as 5 km below the water surface. The NEPTUNE power system is significantly different from terrestrial power systems in many aspects and it requires different switching, protection, and control strategies. In this paper, we address the design of system switching and fault isolation equipment. 相似文献