首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Crustal-scale seismic profiles across Taiwan and the western Philippine Sea   总被引:13,自引:2,他引:13  
We have used combined onshore and offshore wide-angle seismic data sets to model the velocity structure of the Taiwan arc–continent collision along three cross-island transects. Although Taiwan is well known as a collisional orogen, relatively few data have been collected that reveal the deeper structure resulting from this lithospheric-scale process. Our southern transect crosses the Hengchun Peninsula of southernmost Taiwan and demonstrates characteristics of incipient collision. Here, 11-km-thick, transitional crust of the Eurasian plate (EUP) subducts beneath a large, rapidly growing accretionary prism. This prism also overrides the N. Luzon forearc to the east as it grows. Just west of the arc axis there is an abrupt discontinuity in the forearc velocity structure. Because this break is accompanied by intense seismicity, we interpret that the forearc block is being detached from the N. Luzon arc and Philippine Sea plate (PSP) at this point. Our middle transect illustrates the structure of the developing collision. Steep and overturned velocity contours indicate probable large-scale thrust boundaries across the orogen. The leading edge of the coherent PSP appears to extend to beneath the east coast of Taiwan. Deformation of the PSP is largely limited to the remnant N. Luzon arc with no evidence of crustal thickening to the east in the Huatung basin. Our northern transect illustrates slab–continent collision—the continuing collision of the PSP and EUP as the PSP subducts. The collisional contact is below 20 km depths along this transect NE of Hualien. This transect shows elements of the transition from arc–continent collision to Ryukyu arc subduction. Both of our models across the Central Range suggest that the Paleozoic to Mesozoic basement rocks there may have been emplaced as thick, coherent thrust sheets. This suggests a process of partial continental subduction followed by intra-crustal detachment and buoyancy-aided exhumation. Although our models provide previously unknown structural information about the Taiwan orogen, our data do not define the deepest orogenic structure nor the structure of western Taiwan. Additional seismic (active and passive), geologic, and geodynamic modeling work must be done to fully define the structure, the active deformation zones, and the key geodynamic process of the Taiwan arc–continent collision.  相似文献   

2.
A. Yamaji  T. Sakai  K. Arai  Y. Okamura 《Tectonophysics》2003,369(1-2):103-120
Transpressional tectonics characterizes the SW Japan arc. However, we will show in this article that offshore seismic profiles and onshore mesoscale faults indicate that the eastern part of the forearc was subject to transtensional tectonics since ca. 2.0 Ma. Offshore normal faults imaged on the profiles run parallel to the Nankai Trough, and started activity at 1.0 Ma, but transtensional tectonics commenced the onshore area earlier. In order to understand the stress history in the forearc region, we collected fault-slip data from onshore mesoscale faults in Plio-Pleistocene sedimentary rocks in the Kakegawa area at the northeastern extension of the offshore normal faults. Most of the mesoscale faults are oblique-normal, indicating that the area was subject to transtensional tectonics. The faults suggest that the compressional tectonic regime was followed by the transtensional one at 2.0 Ma, in agreement with regional tectonostratigraphic data, which indicate that folding ceased at that time. Present compressional stress followed the transtensional tectonic regime sometime in the late Pleistocene. Transtensional or extensional tectonic zone shifted from the Kakegawa area to the offshore region.These observations indicate that the state of stress just behind the accretionary prism of the eastern Nankai subduction zone has been unstable in the last 2 million years, suggesting that the forearc wedge has been at critical state in that gravitational force and basal shear traction on the wedge have been balanced, but the forearc tectonics has been susceptible to small perturbations. Possible factors compatible with the observed stress history include the change of subduction direction of the plate at 1.0 Ma, and the rapid uplift of Central Japan thereafter.  相似文献   

3.
The geology of Cretaceous accretionary–collision complexes in central Indonesia is reviewed in this paper. The author and his colleagues have investigated the Cretaceous accretionary–collision complexes by means of radiolarian biostratigraphy and metamorphic petrology, as well as by geological mapping. The results of their work has revealed aspects of the tectonic development of the Sundaland margin in Cretaceous time. The Cretaceous accretionary–collision complexes are composed of various tectonic units formed by accretionary or collision processes, forearc sedimentation, arc volcanism and back arc spreading. The tectonic units consist of chert, limestone, basalt, siliceous shale, sandstone, shale, volcanic breccia, conglomerate, high P/T and ultra high P metamorphic rocks and ultramafic rocks (dismembered ophiolite). All these components were accreted along the Cretaceous convergent margin of the Sundaland Craton. In the Cretaceous, the southeastern margin of Sundaland was surrounded by a marginal sea. An immature volcanic arc was developed peripherally to this marginal sea. An oceanic plate was being subducted beneath the volcanic arc from the south. The oceanic plate carried microcontinents which were detached fragments of Gondwanaland. Oceanic plate subduction caused arc volcanism and formed an accretionary wedge. The accretionary wedge included fragments of oceanic crust such as chert, siliceous shale, limestone and pillow basalt. A Jurassic shallow marine allochthonous formation was emplaced by the collision of continental blocks. This collision also exhumed very high and ultra-high pressure metamorphic rocks from the deeper part of the pre-existing accretionary wedge. Cretaceous tectonic units were rearranged by thrusting and lateral faulting in the Cenozoic era when successive collision of continental blocks and rotation of continental blocks occurred in the Indonesian region.  相似文献   

4.
The continental growth mechanism of the Altaids in Central Asia is still in controversy between models of continuous subduction–accretion versus punctuated accretion by closure of multiple oceanic basins. The Beishan orogenic belt, located in the southern Altaids, is a natural laboratory to address this controversy. Key questions that are heavily debated are: the closure time and subduction polarity of former oceans, the emplacement time of ophiolites, and the styles of accretion and collision. This paper reports new structural data, U- Pb and Ar–Ar ages from the eastern Beishan orogen that provide information on the accretion process and tectonic affiliation of various terranes. Our geochronological and structural results show that the younging direction of accretion was northwards and the subduction zone dipped southwards under the northern margin of the Shuangyingshan micro-continent. This long-lived and continuous accretion process formed the Hanshan accretionary prism. Our field investigations show that the emplacement of the Xiaohuangshan ophiolite was controlled by oceanic crust subduction beneath the forearc accretionary prism of the Shuangyingshan–Mazongshan composite arc to the south. Moreover, we address the age and terrane affiliation of lithologies in the eastern Beishan orogen through detrital zircon geochronology of meta-sedimentary rocks. We provide new information on the ages, subduction polarities, and affiliation of constituent structural units, as well as a new model of tectonic evolution of the eastern Beishan orogen. The accretionary processes and crustal growth of Central Asia were the result of multiple sequences of accretion and collision of manifold terranes.  相似文献   

5.
Analysis of a suite of 2-D seismic reflection profiles reveals that the northwestern Sacramento Valley and eastern Coast Range foothills, northern California, are underlain by a system of blind, west-dipping thrust faults. Homoclinally east-dipping and folded Mesozoic marine forearc strata exposed along the western valley margin define the forelimbs of northeast-vergent fault-propagation folds developed in the hanging walls of the thrusts. Exhumed coherent blueschists of the accretionary complex and attenuated remnants of the ophiolitic forearc basement presently exposed in the eastern Coast Ranges are in the hanging wall of the blind thrust system, and have been displaced from their roots in the footwall. Deep, east-dipping magnetic reflectors in the footwall of the thrust system may be fragments of sheared, serpentinized and attenuated ophiolitic basement. Restoration of slip on the thrusts suggests that the Coast Range fault, which is the exposed structural contact between the coherent blueschists and attenuated ophiolite, originally dipped east and is associated with the east-dipping magnetic reflectors in the footwall. This interpretation of the reflection data is consistent with previous inferences about the deep structure in this region, and supports a two-stage model for blueschist exposure in the eastern Coast Ranges: (1) blueschist exhumation relative to the forearc basin by attenuation of the ophiolitic basement along the east-dipping Coast Range fault system in late Cretaceous; (2) blueschists, attenuated ophiolite, and forearc strata all were subsequently uplifted and folded in the hanging wall of the blind thrust system beginning in latest Cretaceous–early Tertiary. The blind thrust system probably rooted in, and was antithetic to, the east-dipping subduction zone beneath the forearc region. Active transpressional plate motion in western California is locally accommodated, in part, by reactivation of blind thrust faults that originally developed during the convergent regime.  相似文献   

6.
The Princhester Serpentinite of the Marlborough terrane of the northern New England Orogen is a remnant of upper mantle peridotite that was partially melted at an oceanic spreading centre at 562 Ma, and subsequently interacted with Late Devonian island arc basalts in an intra-oceanic supra-subduction zone (SSZ) setting. The full range of rare-earth element (REE) contents, including U-shaped patterns, can be explained by a single process of reaction of partially melted, depleted peridotite with Late Devonian calc-alkaline and island arc tholeiite magmas by equilibrium porous flow, fractionating the REE by a chromatographic column effect. The Northumberland Serpentinite on South Island of the Percy Group has similar REE and high field strength element (HFSE) contents to the most depleted samples of the Princhester Serpentinite, supporting a common origin. However, spinel compositions suggest that the Northumberland Serpentinite interacted with boninitic magmas. The REE and mineral geochemistry indicates that the Princhester and Northumberland Serpentinites both represent part of the mantle component of a disrupted SSZ ophiolite. The ophiolite is considered to have formed above an east-dipping subduction zone, based on the geochemistry of Devonian island arc basalts between Mt Morgan and Monto, which include compositions identical to dykes and gabbroic blocks within the Princhester Serpentinite. Blockage of the subduction zone by collision with the Australian continent during the Late Devonian led to slab breakoff and the reversal of subduction direction, trapping the Late Devonian ophiolite in a forearc position. Its location, in a forearc setting above a growing accretionary wedge, conforms to the definition of a Cordilleran-type ophiolite. This interpretation is consistent with current views that most ophiolites are formed from young, hot and thin oceanic lithosphere at forearc, intra-arc and backarc spreading centres in a SSZ setting, and that emplacement follows genesis by 10 million years or less. Late Devonian crustal growth may have been widespread in the New England Orogen, because the disrupted ophiolite assemblage of the Yarras complex in the southern New England Orogen is probably of this age. Extensional tectonism at the end of the Carboniferous dismembered the Princhester – Northumberland ophiolite, removed the crustal section, and produced windows of accretionary wedge rocks within the fragmented ophiolite. The Princhester Serpentinite, together with fault slices of metasedimentary rocks, was thrust westward as a flat sheet over folded strata of the Yarrol Forearc Basin by a Late Permian out-of-sequence thrust during the Hunter – Bowen Orogeny, completing the emplacement of the Marlborough terrane. The Princhester and Northumberland Serpentinites could have been displaced by strike-slip movement along the Stanage Fault Zone or an equivalent structure. There is no record in the northern New England Orogen of SSZ ophiolites and volcanic arc deposits of Cambrian age, as exposed along the Peel Fault. Partial melting of the Princhester Serpentinite at an oceanic spreading centre at 562 Ma, recorded by mafic intrusives displaying N-MORB chemistry, was an earlier event that was outboard of any Early Paleozoic subduction zone along the margin of the Australian continent, and cannot be regarded as representing the early history of the New England Orogen. It is possible that the formation of intra-oceanic arcs in latest Silurian and Devonian time was the first tectonic event common to both the southern and northern New England Orogen.  相似文献   

7.
Possibilities for the fate of oceanic plateaus at subduction zones range from complete subduction of the plateau beneath the arc to complete plateau–arc accretion and resulting collisional orogenesis. Deep penetration, multi-channel seismic reflection (MCS) data from the northern flank of the Solomon Islands reveal the sequence stratigraphy, structural style, and age of deformation of an accretionary prism formed during late Neogene (5–0 Ma) convergence between the 33-km-thick crust of the Ontong Java oceanic plateau and the 15-km-thick Solomon island arc. Correlation of MCS data with the satellite-derived, free-air gravity field defines the tectonic boundaries and internal structure of the 800-km-long, 140-km-wide accretionary prism. We name this prism the “Malaita accretionary prism” or “MAP” after Malaita, the largest and best-studied island exposure of the accretionary prism in the Solomon Islands. MCS data, gravity data, and stratigraphic correlations to islands and ODP sites on the Ontong Java Plateau (OJP) reveal that the offshore MAP is composed of folded and thrust faulted sedimentary rocks and upper crystalline crust offscraped from the Solomon the subducting Ontong Java Plateau (Pacific plate) and transferred to the Solomon arc. With the exception of an upper, sequence of Quaternary? island-derived terrigenous sediments, the deformed stratigraphy of the MAP is identical to that of the incoming Ontong Java Plateau in the North Solomon trench.We divide the MAP into four distinct, folded and thrust fault-bounded structural domains interpreted to have formed by diachronous, southeast-to-northwest, and highly oblique entry of the Ontong Java Plateau into a former trench now marked by the Kia–Kaipito–Korigole (KKK) left-lateral strike-slip fault zone along the suture between the Solomon arc and the MAP. The structural style within each of the four structural domains consists of a parallel series of three to four fault propagation folds formed by the seaward propagation of thrust faults roughly parallel to sub-horizontal layering in the upper crystalline part of the OJP. Thrust fault offsets, spacing between thrusts, and the amplitude of related fault propagation folds progressively decrease to the west in the youngest zone of active MAP accretion (Choiseul structural domain). Surficial faulting and folding in the most recently deformed, northwestern domain show active accretion of greater than 1 km of sedimentary rock and 6 km, or about 20%, of the upper crystalline part of the OJP. The eastern MAP (Malaita and Ulawa domains) underwent an earlier, similar style of partial plateau accretion. A pre-late Pliocene age of accretion (3.4 Ma) is constrained by an onshore and offshore major angular unconformity separating Pliocene reefal limestone and conglomerate from folded and faulted pelagic limestone of Cretaceous to Miocene age. The lower 80% of the Ontong Java Plateau crust beneath the MAP thrust decollement appears unfaulted and unfolded and is continuous with a southwestward-dipping subducted slab of presumably denser plateau material beneath most of the MAP, and is traceable to depths >200 km in the mantle beneath the Solomon Islands.  相似文献   

8.
大洋或弧后洋盆俯冲增生是大陆地壳增长的主导地质作用.重建大陆中消亡的洋地层岩石组合序列是当代大陆动力学和地学研究的重大前沿.洋壳消减杂岩带的厘定是洋板块地质构造重建乃至全球大地构造研究之纲,是理解区域大地构造形成演化及动力学的核心.俯冲增生杂岩带的基本特征:(1)俯冲增生杂岩带物质组成的共性是:以强烈构造变形洋底沉积的硅质岩-硅泥质岩-粉砂岩、凝灰岩;弧-沟浊积岩等为基质;以洋岛-海山灰岩-玄武岩及塌积砾岩,洋内弧残留岩块,超镁铁质蛇绿岩、绿片岩、蓝片岩等为岩块.(2)变形样式:同斜倒转冲断叠瓦构造、增生柱前缘重力滑动构造以及泥质岩的底辟构造;增生楔前缘变形和增生形式受控于大洋或弧后洋盆的规模和洋壳的俯冲速度,也取决于陆缘碎屑供给量及洋底沉积厚度和岩性.(3)宽度和厚度:厚常达几千米,宽达几十公里至数百公里,延长上千公里,是洋壳俯冲消亡过程洋盆地层系统及陆缘沉积物加积的结果.(4)形成机制:是大陆碰撞前大洋(或弧后洋盆)岩石圈俯冲消减的产物.结合带中的早期俯冲增生杂岩带往往卷入晚期的构造混杂作用.  相似文献   

9.
The Neogene–Quaternary Siderno Basin is located in the southern Calabrian Arc, along an E–W transect including the Ionian side and part of the Tyrrhenian margin. The orogenic belt was generated by ongoing northward subduction of Ionian oceanic lithosphere beginning in the Early Cretaceous. Since the Oligocene, the area has experienced complex tectonics, including NW–SE-oriented pull-apart basins. The forearc region contains >2000 m of Oligocene-to-Quaternary strata that cover pre-Tertiary rocks. The succession forms an E-dipping monocline, with tectonic growth structures increasing upward. Erosional truncations and thickness variations suggest a different evolution for the Siderno Basin, which in comparison with northern and southern parts of the Ionian accretionary wedge, evolved differently during the Serravallian–Tortonian stages. NW–SE and NE–SW fault systems are dominant, the first exhibiting strike–slip and normal kinematics in the Nicotera–Gioiosa and Molochio–Antonimina fault zones. These structures were active during infilling of the Neogene basin, and represent a complex transfer zone.

The NE–SW system shows two types of tectonic kinematics: (1) a compressive stage, with NW–SE-orientated shortening, responsible for inversion tectonics documented by east-verging folds, thrusts, and back-thrusts, and (2) emplacement of the variegated clay during the Langhian, which is related to back-thrust propagation. The strike–slip accommodated stress generated in the accretionary prism in response to subduction of Ionian lithosphere and progradation of the accretionary front of the Calabrian forearc.  相似文献   

10.
The South China Sea (SCS) is a region of interaction among three major plates: the Pacific, Indo-Australian and Eurasian. The collision of the Indian subcontinent with the Eurasian plate in the northwest, back-arc spreading at the center, and subduction beneath the Philippine plate along Manila trench in the east and the collision along Palawan trough in the south have produced complex tectonic features within and along the SCS. This investigation examines the satellite-derived gravity anomalies of the SCS and compares them with major tectonic features of the area. A map of Bouguer gravity anomaly is derived in conjunction with available seafloor topography to investigate the crustal structure. The residual isostatic gravity anomaly is calculated assuming that the Cenozoic sedimentary load is isostatically compensated. The features in the gravity anomalies in general correlate remarkably well with the major geological features, including offsets in the seafloor spreading segments, major faults, basins, seamounts and other manifestations of magmatism and volcanism on the seafloor. They also correlate with the presumed location of continental-oceanic crust boundary. The region underlain by oceanic crust in the central part of the SCS is characterized by a large positive Bouguer gravity anomaly (220–330 mgal) as well as large free-air and residual isostatic anomalies. There are, however, important differences among spreading segments. For example, in terms of free-air gravity anomaly, the southwest section of mid-ocean has an approximately 50 km wide belt of gravity low superimposed on a broad high of 45 mgal running NW–SE, whereas there are no similar features in other spreading segments. There are indications that gravity anomalies may represent lateral variation in upper crustal density structure. For instance, free air and isostatic anomalies show large positive anomalies in the east of the Namconson basin, which coincide with areas of dense volcanic material known from seismic surveys. The Red River Fault system are clearly identified in the satellite gravity anomalies, including three major faults, Songchay Fault in the southwest, Songlo Fault in the Northeast and Central Fault in the center of the basin. They are elongated in NW–SE direction between 20±30'N and 17°N and reach to Vietnam Scarp Fault around 16°30'N. It is also defined that the crustal density in the south side of the Central Basin is denser than that in the north side of the Central Basin.  相似文献   

11.
It is useful to differentiate between thrust belts that are related to east(E)-dipping or west(W)-dipping subduction. More precisely, these either follow or resist the overall ‘eastward’ mantle flow detected by the hot-spot reference frame. Because of the overall ‘westward’ drift of the lithosphere we find in E-dipping subduction that the basal decollement underlying the eastern plate reaches the surface and involves deep crustal rocks. With W-dipping subduction, however, we find that the basal decollement of the eastern plate is warped as well as subducted. Consequently thrust belts related to E- (or NE-) dipping subduction show conspicuous structural and morphologic relief, involve deep crustal rocks, and are associated with shallow foredeeps. On the other hand, thrust belts related to W- (or SW-) dipping subduction show relatively low structural and morphological relief, involve only shallow upper crustal rocks and are associated with deep foredeeps as well as back-arc extension. The accretionary wedge-foredeep-back-arc basin association is visualized as an overall eastward propagating tectonic wave. The accretionary wedge forms in the frontal parts and generally below sea-level. This is followed by forward migrating extension that cuts the earlier accretionary wedge. Typically such a system occurs in the context of overall W-dipping subduction and is characterized by an arcuate shape (e.g. Carpathians, Apennines, Barbados, etc.). Along the branches of the arc external transpression and internal transtension co-exist but with different sense (i.e. sinistral transpression contrasting with dextral transtension). We also observe that with W-dipping subduction the tangent to a pre- deformation marker is descending into the foredeep at an angle in the range of 1–10° while with E-(or NE-)dipping subduction the same marker would rise towards the hinterland with typical angles of about 5–10°. Foredeep subsidence is mainly controlled by the load of the thrust sheets in thrust belts due to E-(or NE-)dipping subduction and by the roll-back of the subduction hinge in accretionary wedges due to W-dipping subduction. Subsidence or uplift rates in the foredeeps and accretionary wedges related to the two different types of subduction are very different, providing different P-T-t paths in the two geodynamic realms. The present shape and structure of the thrust belts belonging to one of these two general types may help us in reconstructing the location of thinned lithosphere and basin evolution in the past.  相似文献   

12.
The Gulf of Cadiz spans the plate boundary between Africa and Eurasia west of the Betic-Rif mountain belt. A narrow east dipping subduction zone descends beneath the Gulf of Cadiz and the straits of Gibraltar. The deep crustal structure of the Gulf and the adjacent SW Iberian and Moroccan margins is constrained by numerous multi-channel seismic reflection and wide-angle seismic surveys. A compilation of these existing studies is presented in the form of depth to basement, sediment thickness, depth to Moho and crustal thickness maps. These structural maps image an E-W trending trough, with thin (< 10 km) crust beneath the Gulf of Cadiz. This trough is filled by an eastward thickening wedge of sediments, reaching a thickness of 10-15 km in the eastern Gulf. These sediments are tectonically deformed, primarily along a series of westward-vergent thrust faults and represent a 200-250 km wide accretionary wedge. The northern and especially the southern limits of the accretionary wedge are marked by sharp morphological lineaments showing evidence of recent deformation. These tectonic limits are situated in an internal position with respect to the Miocene deformation front (external Betic and Rif allocthons), which has been abandoned. At the western boundary of the accretionary wedge, near the adjacent Seine and Horseshoe abyssal plains, an E-W trending basement high (Coral Patch Ridge) can be seen indenting the deformation front in an asymmetric manner. Analog modeling is performed using granular materials accreted against a semicircular backstop (representing the basement of the Rif and Betic mountain belts). The modeling initially produces a symmetric, arcuate accretionary wedge. The ensuing collision of an oblique rigid indenter retards accretion on one side, resulting in an embayment and a locally steeper deformation front. The deformation pattern observed in morphology and high-resolution seismic profiles suggests the accretionary wedge and underlying subduction system is still active. The implications of active subduction for the source region of the 1755 Lisbon earthquake and the regional seismic hazard assessment are discussed.  相似文献   

13.
The evolution of a subduction channel and orogenic wedge is simulated in 2D for an active continental margin, with P-T paths being displayed for selected markers. In our simulation, subduction erosion affects the active margin and a structural pattern develops within a few tens of millions of years, with four zones from the trench into the forearc: (i) an accretionary complex of low grade metamorphic sedimentary material, (ii) a wedge of nappes with alternating upper and lower crustal provenance, and minor interleaving of oceanic or hydrated mantle material, (iii) a megascale melange composed of high pressure (HP) and ultra-high pressure (UHP) metamorphic rocks extruded from the subduction channel, and (iv) the upward tilted frontal part of the remaining lid. The P–T paths and time scales correspond to those typically recorded in orogenic belts. The simulation shows that HP/UHP metamorphism of continental crust does not necessarily indicate collision, but that the material can be derived from the active margin by subduction erosion and extruded from the subduction channel beneath the forearc during ongoing subduction.  相似文献   

14.
The Jiajiwaxi pluton in the southern portion of the West Kunlun Range can be divided into two collision–related intrusive rock series, i.e., a gabbro–quartz diorite–granodiorite series that formed at 224±2.0 Ma and a monzonitic granite–syenogranite series that formed at 222±2.0 Ma. The systematic analysis of zircon U-Pb geochronology and bulk geochemistry is used to discuss the magmatic origin(material source and thermal source), tectonic setting, genesis and geotectonic implications of these rocks. The results of this analysis indicate that the parent magma of the first series, representing a transition from I-type to S-type granites, formed from thermally triggered partial melting of deep crustal components in an early island–arc–type igneous complex, similar to an I-type granite, during the continental collision orogenic stage. The parent magma of the second series, corresponding to an S-type granite, formed from the partial melting of forearc accretionary wedge sediments in a subduction zone in the late Palaeozoic–Triassic. During continued collision, the second series magma was emplaced into the first series pluton along a central fault zone in the original island arc region, forming an immiscible puncture-type complex. The deep tectonothermal events associated with the continent–continent collision during the orogenic cycle are constrained by the compositions and origins of the two series. The new information provided by this paper will aid in future research into the dynamic mechanisms affecting magmatic evolution in the West Kunlun orogenic belt.  相似文献   

15.
俯冲带作为板块构造最为重要的标志之一,是地球最大的物质循环系统,被称为“俯冲工厂”.俯冲作用是驱动和维持板块运动的重要动力引擎.一个完整的俯冲带发育海沟、增生楔、弧前盆地、岩浆弧、弧后盆地(或弧背前陆盆地)等基本构造单元.在一些特殊情况下(如洋脊俯冲、年轻洋壳俯冲、海山俯冲),则可形成一些特殊的俯冲带结构(如平板俯冲、俯冲侵蚀),导致岩浆弧、增生楔、弧前盆地等不发育甚至缺失.俯冲大洋板片可滞留于或穿越地幔过渡带进入下地幔甚至到达核幔边界,把地壳物质带入到地球深部,并通过地幔柱活动上升到浅部.俯冲带是构造活动强烈的区域,存在走滑、挤压、伸展等变形及其构造叠加.俯冲带海沟可向大洋或大陆方向迁移,岛弧及增生楔等也随之发生迁移,使俯冲带上盘发生周期性挤压和伸展,形成复杂的古地理格局.微陆块、岛弧、海山/洋底高原等地质体在俯冲带发生增生时,可阻塞先存的俯冲带,造成俯冲带跃迁或俯冲极性反转,在其外侧形成新的俯冲带.俯冲带深部精细结构、俯冲起始如何发生、板块俯冲与地幔柱的深部关联机制等是当前俯冲带研究中值得关注的前沿问题.开展俯冲带地球物理深部探测、古缝合带与现今俯冲带对比研究、俯冲带动力学数值模拟...  相似文献   

16.
M.G. Audley-Charles   《Tectonophysics》2004,389(1-2):65-79
The bathymetry and abrupt changes in earthquake seismicity around the eastern end of the Java Trench suggest it is now blocked south–east of Sumba by the Australian, Jurassic-rifted, continental margin forming the largely submarine Roti–Savu Ridge. Plate reconstructions have demonstrated that from at least 45 Ma the Java Trench continued far to the east of Sumba. From about 12 Ma the eastern part of the Java Trench (called Banda Trench) continued as the active plate boundary, located between what was to become Timor Island, then part of the Australian proximal continental slope, and the Banda Volcanic Arc. This Banda Trench began to be obliterated by continental margin-arc collision between about 3.5 and 2 Ma.The present position of the defunct Banda Trench can be located by use of plate reconstructions, earthquake seismology, deep reflection seismology, DSDP 262 results and geological mapping as being buried under the para-autochthon below the foothills of southern Timor. Locating the former trench guides the location of the apparently missing large southern part of the Banda forearc that was carried over the Australian continental margin during the final stage of the period of subduction of that continental margin that lasted from about 12 Ma to about 3.5 Ma.Tectonic collision is defined and distinguished from subduction and rollback. Collision in the southern part of the Banda Arc was initiated when the overriding forearc basement of the upper plate reached the proximal part of the Australian continental slope of the lower plate, and subduction stopped. Collision is characterised by fold and thrust deformation associated with the development of structurally high decollements. This collision deformed the basement and cover of the forearc accretionary prism of the upper plate with part of the unsubducted Australian cover rock sequences from the lower plate. Together with parts of the forearc basement they now form the exposed Banda orogen. The conversion of the northern flank of the Timor Trough from being the distal part of the Banda forearc accretionary prism, carried over the Australian continental margin, into a foreland basin was initiated by the cessation of subduction and simultaneous onset of collisional tectonics.This reinterpretation of the locked eastern end of the Java Trench proposes that, from its termination south of Sumba to at least as far east as Timor, and probably far beyond, the Java-Banda Trench and forearc overrode the subducting Australian proximal continental slope, locally to within 60 km of the shelf break. Part of the proximal forearc's accretionary prism together with part of the proximal continental slope cover sequence were detached and thrust northwards over the Java-Banda Trench and forearc by up to 80 km along the southwards dipping Savu Thrust and Wetar Suture. These reinterpretations explain the present absence of any discernible subduction ocean trench in the southern Banda Arc and the narrowness of the forearc, reduced to 30 km at Atauro, north of East Timor.  相似文献   

17.
A ~400 km long deep crustal reflection seismic survey was acquired in central Victoria, Australia, in 2006. It has provided information on crustal architecture across the western Lachlan Orogen and has greatly added to the understanding of the tectonic evolution. The east-dipping Moyston Fault is confirmed as the suture between the Delamerian and western Lachlan Orogens, and is shown to extend down to the Moho. The Avoca Fault, the boundary between the Stawell and Bendigo Zones, is a west-dipping listric reverse fault that intersects the Moyston Fault at a depth of about 22 km, forming a V-shaped geometry. Both the Stawell and Bendigo Zones can be divided broadly into a lower crustal region of interlayered and imbricated metavolcanic and metasedimentary rocks and an upper crustal region of tightly folded metasedimentary rocks. The Stawell Zone was probably part of a Cambrian accretionary system along the eastern Gondwanaland margin, and mafic rocks may have been partly consumed by Cambrian subduction. Much of the Early Cambrian oceanic crust beneath the Bendigo Zone was not subducted, and is preserved as a crustal-scale imbricate thrust stack. The seismic data have shown that a thin-skinned structural model appears to be valid for much of the Melbourne Zone, whereas the Stawell and Bendigo Zones have a thick-skinned structural style. Internal faults in the Stawell and Bendigo Zones are mostly west-dipping listric faults, which extend from the surface to near the base of the crust. The Heathcote Fault Zone, the boundary between the Bendigo and Melbourne Zones, extends to at least 20 km, and possibly to the Moho. A striking feature in the seismic data is the markedly different seismic character of the mid to lower crust of the Melbourne Zone. The deep seismic reflection data for the Melbourne Zone have revealed a multilayered crustal structure that supports the Selwyn Block model.  相似文献   

18.
大别山南北两侧的浅变质岩是碰撞造山以前洋壳俯冲造山阶段的重要组成部分。木兰山片岩或张八岭群是俯冲的洋壳;苏家河群、信阳群和佛子岭群是由洋壳俯冲形成的海沟沉积,并因俯冲过程中的前进变形而形成增生楔;杨山煤系和梅山群是石炭纪弧前盆地沉积,并因俯冲过程中的前进变形而被增生楔逆掩。宿松群是扬子大陆被动边缘沉积,不是俯冲造山带的成员。因洋壳俯冲形成的弧和弧后盆地可能已被新生界沉积物掩盖。高压-超高压变质带是碰撞造山后期从深部折返的外来体。高压-超高压变质带正好处于洋壳和增生楔之间,破坏了早期洋壳俯冲造山带的完整性,使得洋壳俯冲造山阶段的特征被破坏,因而不易辨别。俯冲造山阶段应为奥陶纪到泥盆纪,碰撞造山阶段应从二叠纪开始。  相似文献   

19.
大别山南北两侧的浅变质岩是碰撞造山以前洋壳俯冲造山阶段的重要组成部分。木兰山片岩或张八岭群是俯冲的洋壳;苏家河群、信阳群和佛子岭群是由洋壳俯冲形成的海沟沉积,并因俯冲过程中的前进变形而形成增生楔;杨山煤系和梅山群是石炭纪弧前盆地沉积,并因俯冲过程中的前进变形而被增生楔逆掩。宿松群是扬子大陆被动边缘沉积,不是俯冲造山带的成员。因洋壳俯冲形成的弧和弧后盆地可能已被新生界沉积物掩盖。高压—超高压变质带是碰撞造山后期从深部折返的外来体。高压—超高压变质带正好处于洋壳和增生楔之间,破坏了早期洋壳俯冲造山带的完整性,使得洋壳俯冲造山阶段的特征被破坏,因而不易辨别。俯冲造山阶段应为奥陶纪到泥盆纪,碰撞造山阶段应从二叠纪开始。  相似文献   

20.
台湾造山带是中新世晚期以来相邻菲律宾海板块往北西方向移动,导致北吕宋岛弧系统及弧前增生楔与欧亚大陆边缘斜碰撞形成的。目前该造山带仍在活动,虽然规模很小,但形成了多数大型碰撞造山带中的所有构造单元,是研究年轻造山系统的理想野外实验室,为理解西太平洋弧-陆碰撞过程和边缘海演化提供了一个独特的窗口。本文总结了二十一世纪以来对台湾造山带的诸多研究进展,讨论了其构造单元划分及演化过程。我们将台湾造山带重新划分为6个构造单元,由西至东分依次为:(1)西部前陆盆地;(2)中央山脉褶皱逆冲带;(3)太鲁阁带;(4)玉里-利吉蛇绿混杂岩带;(5)纵谷磨拉石盆地;(6)海岸山脉岛弧系统。其中,西部前陆盆地为6.5Ma以来伴随台湾造山带的隆升剥蚀形成沉积盆地。中央山脉褶皱逆冲带为新生代(57~5.3Ma)欧亚大陆东缘伸展盆地沉积物由于弧-陆碰撞受褶皱、逆冲及变质作用改造形成的。太鲁阁带是造山带中的古老陆块,主要记录中生代古太平洋俯冲在欧亚大陆活动边缘形成的岩浆、沉积和变质岩作用。玉里-利吉蛇绿混杂岩带和海岸山脉岛弧系统分别为中新世中期(~18Ma)以来南中国海板块向菲律宾海板块之下俯冲形成的岛弧和弧前增生楔,其中玉里混杂岩中有典型低温高压变质作用记录,变质年龄为11~9Ma;岛弧火山作用的主要时限为9.2~4.2Ma。纵谷磨拉石盆地记录1.1Ma以来的山间盆地沉积。台湾造山带的构造演化可划分为4个阶段:(a)古太平洋板块俯冲与欧亚大陆边缘增生阶段(200~60Ma);(b)欧亚大陆东缘伸展和南中国海扩张阶段(60~18Ma);(c)南中国海俯冲阶段(18~4Ma);(d)弧-陆碰撞阶段(<6Ma)。台湾弧-陆碰撞造山带是一个特殊案例,其弧-陆碰撞并不伴随着弧-陆之间的洋盆消亡,而是由于北吕宋岛弧及弧前增生楔伴随菲律宾海板块运动向西北方走滑,仰冲到欧亚大陆边缘,形成现今的台湾造山带。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号