首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
New Series of Rock and Sediment Geochemical Reference Materials   总被引:1,自引:0,他引:1  
Certified or reference values for sixty six to sixty seven elements and element oxides are given for geochemical reference materials recently prepared by the Institute of Geophysical and Geochemical Exploration (IGGE), including limestone (GSR-13), granitic gneiss (GSR-14), amphibolite (GSR-15), lake sediment (GSS-9) and stream sediments (GSD-1a, GSD-13, GSD-14). These samples supplement the GSR 1-6, GSD1-8 and GSD 9-12 certified reference materials already prepared and characterized by the IGGE.  相似文献   

2.
热水解-离子色谱法连续测定地质物料中的氟、氯和硫   总被引:2,自引:0,他引:2  
研究报导了一种快速、高效和无干扰地测定地质物料中氟、氯和硫的热水解离子色谱方法。自行设计和组装了热水解装置。实验研究和选择了热水解条件、离子色谱测定的最佳工作状态,从而获得了准确可靠的结果。用本法对10个地球化学标准参考样(GSR-3,6;GSS-1,3,6,8;GSD-11,12)进行分析测定,其结果与这些标样的最佳估计值和推荐值非常一致。该方法的检出限分别为:氟6.6ppm;氯30.8ppm;硫酸根36.8ppm。方法的精密度(RSD,%)对氟含量为577ppm,氯含量为70ppm和硫酸根含量为420ppm的样品来说,分别为1.8%,12.3%和3.8%。  相似文献   

3.
Seven soil geochemical certified reference materials (CRMs) GSS 10-16 recently prepared by the Institute of Geophysical and Geochemical Exploration (IGGE), are mainly used for sample analysis in geochemical surveys of the overburden region in China. Fifteen Chinese institutes and central laboratories, which operated at a high level of analytical performance analysed these samples. More than ten reliable analytical methods based on different principles of measurement were adopted, of which ICP-MS, ICP-AES and NAA were taken as the primary analytical methods. In total, 23715 determinations were carried out, 5660 average data sets were obtained, seventy two elements and components were determined and certified values of sixty nine elements and components were assigned. Rhenium concentrations were measured by isotope dilution ICP-MS in GSS-10, GSS-13, GSS-15 and GSS-16. Certified values of elements in GSS 10-16 have good precision and for 90% of these values relative uncertainties are less than 10%.  相似文献   

4.
More than 40 trace elements in 11 Chinese geological reference materials (stream sediments) GSD-1 to GSD-7 and GSD-9 to GSD-12 were determined by inductively coupled plasma-mass spectrometry (ICP-MS). Open acid digestions were used to prepare samples for the determination of most elements. However, for the measurement of Y, Zr and Hf, it was found necessary to use an alkali fusion in order to make fully quantitative measurements. The results obtained in this work are generally in good agreement with the recommended values from the sub-ppm level to > several hundred ppm and illustrate the versatility of the technique, particularly for some less well characterised elements.  相似文献   

5.
The USGS reference glasses GSA-1G, GSC-1G, GSD-1G, GSE-1G, BCR-2G, BHVO-2G and BIR-1G were investigated by different analytical techniques. All these materials have a geological (basaltic) matrix and are therefore useful in igneous geochemistry as matrix-matched reference materials for microanalytical techniques. The new GS glasses have trace elements in groups at concentration levels of about < 0.01, 5, 50 and 500 μg g-1. Their major element compositions have been determined by EPMA, and trace elements have been analysed by LA-ICP-MS and two isotope dilution techniques using TIMS and ICP-MS. EPMA and LA-ICP-MS analyses indicated that the USGS reference glasses are homogeneous at the μm to mm scale with respect to major (variations < 1-2%) and most trace elements (variations 1-4%). Trace element data obtained from the different analytical techniques agreed within an uncertainty of 1-5%, indicating that between method results are comparable. Therefore, the preliminary working values for the four USGS GS glasses calculated from these data have a low level of uncertainty.  相似文献   

6.
Reference samples of rocks from the Institute of Geochemistry, Irkutsk (IGI) and the Research Institute of Applied Physics, Irkutsk University (RIAP) and silicate rocks from the GeoPT proficiency testing series were analysed with the aim of determining Ag, B, Ge, Mo, Sn, Tl and W abundances by an atomic-emission method with air-stabilized D.C. arc excitation. Many of the results reported are without recommended or assigned values. The results are compared with compilation data from the literature and, where possible, with assigned values for samples of the Geo PT series.  相似文献   

7.
This paper presents data on REE and Y, Nb, Zr, Hf, Ta, Th and U abundances for two candidate reference materials (RMs), spinel lherzolite LSHC-1 and amphibole Amf-1, being currently developed at the Institute of Geochemistry SB RAS, Irkutsk. To determine the contents of these elements inductively coupled plasma-mass spectrometry was applied with: (i) solution nebulisation (solution ICP-MS) and (ii) laser ablation (LA-ICP-MS) of fused glass disks. The precision of results obtained by both techniques was better than 6% RSD for most elements. Accuracy was assessed by using the geochemical RMs JB-2, JGb-1 (GSJ) and MAG-1 (USGS). The trace element results by solution ICP-MS for JGb-1 and JB-2 agree with reference values presented by Imai et al. (1995, this Journal) within 1–10%. Significant differences were found for Nb and Ta determinations. The accuracy of LA-ICP-MS results evaluated by RM MAG-1 was within 4%, except for Eu (about 10%). The analytical results obtained for LSHC-1 and Amf-1 by solution ICP-MS and LA-ICP-MS were in good agreement with each other and with INAA and XRF data presented for the certification of these RMs. They can be considered as the indicative values for assigning certified values to the above-mentioned RMs.  相似文献   

8.
Analytical data obtained in our two laboratories on three rook samples from the Institute of Geochemistry, Irkutsk, are reported and compared with "established", "certified" and "uncertain" values. Methods used are described briefly and some comments offered on earlier published information.  相似文献   

9.
10.
The 18 Chinese geochemical standard reference samples GSD 9-12 (stream sediments), GSS 1-8 (soils) and GSR 1-6 (rocks) were prepared after GSD 1-8 (stream sediments) for even wider and increasing needs of geology, exploration geochemistry and geochemical analysis. Usable values of 41 trace, minor and major elements of the 18 samples were published in 1984. In the following two years, efforts were concentrated on the determination of other elements, most of which are more difficult to determine accurately and hence not many data were available in the literature. At the same time, additional data on the 41 elements already evaluated were also submitted. In all, 155 234 results were available along with the 35 284 analytical data submitted. The processing of samples, the examination of sample homogeneity, the plan of collaborative analysis of the samples, and the criteria for defining the recommended values are described. The recommended or reference values of the 72 constituents, to-gether with the 35 284 analytical data of the 18 samples are published in this paper.  相似文献   

11.
In order to meet the needs of geochemical mapping and geochemical exploration, 125 geochemical reference materials have been successively prepared by the Institute of Geophysical and Geochemical Exploration (IGGE) since 1978. They include certified reference materials of stream sediments (GSD1-14), soils (GSS1-16; ASA 1–6, for analysis of available elements), various rocks (GSR1-6, GSR13-15), biological material (GSV1-4 and GSB 1–10), synthetic silicates (GSES I 1–11) and limestones (GSES II 1–9 for spectral analysis). They also include geochemical reference materials for ore analysis: Cu-Pb-Zn ores (GSO1-4), Cu-Pb-Zn concentrates (GSO5-7), platinum-group element (PGE) ores (GPt5-6 and GPt9-10), silver ores (GAg1-6) and geochemical reference materials for Au (GAu8-14) and PGE determination (GPt1-4, and GPt7-8). A multi-laboratory collaborative analysis scheme was adopted in the certification procedure of the IGGE. Dozens of competent laboratories with hundreds of senior analysts in China participated in the certification analysis. These samples have been supplied to more than thirty countries and more than 4000 customers from national industrial, agricultural, environmental, scientific and educational fields. Most of the geochemical reference materials are used for the calibration of measuring apparatus, evaluation of analytical methods, certification studies, quality control and laboratory accreditation programmes.  相似文献   

12.
Measuring Hg Isotopes in Bio-Geo-Environmental Reference Materials   总被引:1,自引:0,他引:1  
With the emergence of new analytical techniques and the expansion of scientific fields explored by using mercury isotopes, the community needs reference materials (RM) to validate and assure the accuracy of the results. The present work investigates (1) the characterisation of secondary RM in order to validate analytical systems, (2) the effects of two complex matrices on isotopic determination using stannous chloride cold vapour generation coupled to MC-ICP-MS (CV-MC-ICP-MS), (3) the effects of multiple digestion techniques for total Hg extraction and (4) the characterisation of nine geo-bio-environmental RM. Two secondary mono-elemental RMs analysed using two different analytical setups yielded isotopic compositions on δ202Hg of −3.54 ± 0.27‰ (CRPG-F65A, 2SD, n = 38) and +2.59 ± 0.19‰ (CRPG-RL24H, 2SD, n = 30) relative to the CRM NIST SRM 3133. These two RMs cover the whole range of Hg isotopic fractionation in natural samples and are made available to the scientific community. Complex fly ash and hydroxysulfate green rust matrices were synthesised, spiked with NIST SRM 3133, then digested and finally analysed versus the mono-elemental NIST SRM 3133 to show potential effect of these complex matrices during CV-MC-ICP-MS. Three digestions techniques, including traditional acid digestion, microwave digestion and high pressure-high temperature digestion, were applied to the lichen RM BCR-482 in order to compare advantages and drawbacks of these methods. Finally, the isotopic compositions of nine RMs including soils (NIST SRM 2711; GXR-2; GSS-4), sediment (GSD-10), jasperoid (GXR-1), ore deposit (GXR-3), fly ashes (BCR-176; BCR-176R) and lichen (BCR-482) are reported. These selected materials have δ202Hg values ranging from −1.75‰ to +0.11‰. Some RMs also presented mass-independent fractionation with Δ199Hg and Δ201Hg of up to −0.6‰.  相似文献   

13.
The preparation and study of the two rock reference samples, Quartz Diorite SKD-1 and Sviatonossite SSv-1, are described, along with mineralogical and petrographic features. After its homogeneity studies, the two samples were analysed by seventy-five former USSR laboratories in the framework of an interlaboratory analytical program. The two samples have been certified respectively for 41 and 39 major, minor and trace elements; additionally, values are proposed for about 20 trace elements. The compiled data on the two samples are presented as an Appendix. Both the samples, processed in about 280 kg, form now part of the set of eight magmatic rock reference samples prepared by the Institute of Geochemistry in Irkutsk.  相似文献   

14.
This paper describes the creation of two new reference samples of black shale, SCHS-1 and SLg-1, collected in the Bodaibo Region of Irkutsk District (Siberia, Russia). These samples have been developed as State Standard Samples to meet the requirements of Russia's Normative Documents, so that they can be recognised by the Russian State Certification Agency and included on the State Register of certified reference materials. SCHS-1 was produced from shale of the Khomolkho suite; SLg-1 represents the average composition of the Sukhoy Log gold deposit (within Au mineralisation). The homogeneity was assessed by applying the concept of potential inhomogeneity, and the inhomogeneity uncertainties (σinhom) for the indicator elements that were estimated experimentally by silicate XRF analysis. It was found that a majority of the indicator elements was characterised by σinhomp < 1/8 (Δp is the permissible certification uncertainty), and so σinhom was neglected for the indicator elements and all other elements that were included in their respective group. The value of σinhom calculated for Fe (σinhom,Fep > 1 /8) was taken into consideration for the noble metals and their associated elements (e.g., Ag, As, Au, etc.). More than fifty laboratories (thirty-seven from Russia) were involved in the interlaboratory experiment (ILE) to analyse these reference samples. The data obtained from the ILE allowed SCHS-1 and SLg-1 to be certified for, fifty-one and forty-three elements, respectively, as State Standard Samples.  相似文献   

15.
泛滥平原沉积物标准物质研制   总被引:6,自引:6,他引:0  
泛滥平原沉积物能代表流域内元素的平均分布规律并具有普遍的适用性,是地球化学填图工作的重要介质。目前国际上尚无泛滥平原沉积物标准物质,国外相似标准物质的研制注重于环境方面,定值成分较少;我国同类的土壤和水系沉积物标准物质受限于不同工作需要,研制目的各不相同,且多数标准物质不足。为满足需求,本文研制了长江流域、赣江流域、汉水流域、淮河流域、黄河流域、海河流域、黑龙江流域共7个泛滥平原沉积物国家一级标准物质(编号为GBW07385~GBW07391)。此系列标准物质采用X射线荧光光谱压片法测试了26种成分,主量成分的RSD小于1%,微量元素的RSD约为2%,所有成分的RSD均小于7%,方差检验的F值均小于临界值F0. 05(24,25)=1. 96,表明样品的均匀性良好。在23个月的考察期内,检验的24种成分未发现统计学意义的明显变化,证明样品的稳定性良好。由全国13家实验室采用不同原理的、可靠的多种分析方法共同完成了73种元素和化合物共511个特性成分的定值测试,除GBW07386和GBW07388的CO2未能赋值外,其余494个特性成分给出了认定值与不确定度,15个特性成分给出了参考值,是我国同类标准物质定值最为齐全的一个系列。该系列标准物质代表了各自流域元素的背景含量,适用于多目标地球化学调查、土地质量地球化学调查等样品的分析质量监控,亦可用作环境、农业等领域相关样品测试的量值和质量监控标准。  相似文献   

16.
Two rock samples from the San Marcos Gabbro and the Lakeview Mountain Tonalite of the Southern California Batholith were prepared as U.S. Geological Survey reference samples. These samples were chosen to supply reference data for rocks having intermediate silica contents in the range of 45-60 percent. Unpublished data by members of the U.S. Geological Survey and some published data are summarized, and provisional estimates of the major and minor oxide and traceelement contents are given.  相似文献   

17.
We present a revised method for the determination of concentrations of rare earth (REE) and other trace elements (Y, Sc, Zr, Ba, Hf, Th) in geological samples. Our analytical procedure involves sample digestion using alkaline fusion (NaOH-Na2O2) after addition of a Tm spike, co-precipitation on iron hydroxides, and measurement by sector field-inductively coupled plasma-mass spectrometry (SF-ICP-MS). The procedure was tested successfully for various rock types (i.e., basalt, ultramafic rock, sediment, soil, granite), including rocks with low trace element abundances (sub ng g−1). Results obtained for a series of nine geological reference materials (BIR-1, BCR-2, UB-N, JP-1, AC-E, MA-N, MAG-1, GSMS-2, GSS-4) are in reasonable agreement with published working values.  相似文献   

18.
Platinum, palladium and rhodium have been determined in 18 U.S. Geological Survey reference materials by graphite furnace atomic absorption spectrometry after preconcentration by the classical leadfree assay technique. A comparison with literature values shows clearly the need for additional data on these samples before "best" values can be assigned.  相似文献   

19.
Eighteen Chinese geologic reference samples (stream sediments GSD 9–12, soils GSS 1–8, and rocks GSR 1–6) were analyzed by wavelength-dispersive X-ray fluorescence spectrometry (XRFS) for major elements Si, Ti, Al, Fe, Mn, Mg, Ca, Na, K, and P, and by energy-dispersive XRFS for trace elements Ba, Ce, Cr, Cu, La, Nb, Ni, Rb, Sr, Y, Zn, and Zr. Major element analysis followed gravimetric determination of loss on ignition, and samples were prepared by fusion with Li2B4O7. A loose-powder sample preparation was used for trace element analysis. The results reported in this study are, generally, in good agreement with concentrations compiled by X. Xie of the Geochemical Standard Reference Group and the Institute of Geophysical and Geochemical Exploration (People's Republic of China).  相似文献   

20.
文章研究了地质样品中稀土元素Sm、Eu、Gd的同位素稀释-感耦等离子体质谱的测定方法。验证了同位素稀释法不受基体的影响,实验了利用P507树脂分离干扰元素Ba、La和Pr的条件。Sm、Eu、Gd的检出限(ng/g)分别为15、2.71、12;对标样GSD-10平行测定10次,各元素的相对标准偏差均<2.5%;标样测定结果与推荐值相符。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号