共查询到20条相似文献，搜索用时 31 毫秒
1.
在波浪荷载、潮汐作用下砂土等粗粒土常常经受长期动力变形。运用分数阶微积分理论,分析了5种不同粗粒土在不同加载条件下的累积变形特性及粗粒土的分数阶应变率,传统的整数阶应变率随着加载次数的变化而变化,而粗粒土的分数阶应变率在同一加载条件下保持为常数。通过粗粒土颗粒破碎的分形理论,尝试建立分数阶应变率与土颗粒分布的分形维度之间的关系,分析土体分形维度对分数阶应变率大小的影响,发现随着分形维度的增加,分数阶应变率的数值降低。 相似文献
2.
Modelling cyclic behaviour of granular soils under both drained and undrained conditions with a good performance is still a challenge. This study presents a new way of modelling the cyclic behaviour of granular materials using deep learning. To capture the continuous cyclic behaviour in time dimension, the long short-term memory (LSTM) neural network is adopted, which is characterised by the prediction of sequential data, meaning that it provides a novel means of predicting the continuous behaviour of soils under various loading paths. Synthetic datasets of cyclic loading under drained and undrained conditions generated by an advanced soil constitutive model are first employed to explore an appropriate framework for the LSTM-based model. Then the LSTM-based model is used to estimate the cyclic behaviour of real sands, ie, the Toyoura sand under the undrained condition and the Fontainebleau sand under both undrained and drained conditions. The estimates are compared with actual experimental results, which indicates that the LSTM-based model can simultaneously simulate the cyclic behaviour of sand under both drained and undrained conditions, ie, (a) the cyclic mobility mechanism, the degradation of effective stress and large deformation under the undrained condition, and (b) shear strain accumulation and densification under the drained condition. 相似文献
3.
分数阶微分理论在土体静力黏弹性本构模型中得到了广泛应用,然而,其在动力弹塑性模型中的应用尚不多见。为此,基于分数阶微积分理论分析了粗粒料在循环荷载下的变形特性,提出了粗粒料在循环荷载下的分数阶应变率;并以此为基础,进一步建立了粗粒料受静动力荷载作用下的边界面塑性力学本构模型。所提出模型包含10个参数,均可以运用常规三轴试验获得。为了验证所提出模型,选取了几种已有不同文献中的不同粗粒料试验数据进行了模拟,发现,所提出的模型可以较好地模拟粗粒料在静动力加载下的应力-应变行为,对于循环荷载下的长期变形也能较好地预测。 相似文献
4.
The theory of fractional calculus has been successfully applied to model the triaxial behaviour of soils under static loading conditions. However, limited work has been carried out in using the fractional calculus to describe the cyclic behaviour of granular soils. In this paper, a fractional order constitutive model for granular soils under drained cyclic loading is proposed by incorporating the concept of fractional rate for strain accumulation. The fractional rate for strain accumulation is obtained from the analysis of the experimental data by utilizing the fractional calculus. Comparison between the test results and model predictions is presented. The key feature of the proposed model is that it can reasonably characterise the cyclic deformation of granular soils under both low and high loading cycles. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
5.
This paper presents an experimental study focusing on the mechanisms taking place in a granular platform supported by piles in soft soil under vertical cyclic loading. An original three-dimensional laboratory model was developed, with a scale factor of 1/10 on the length. The model contains 20 rigid piles, and the compressible soil is explicitly simulated by a soft material. The case of a thin granular load transfer platform overlaid by a rigid slab is studied. Tests were performed under monotonic or cyclic loading applied on the surface using a pressurized membrane. The analysis is based on a force and displacement sensor instrumentation and application of a Digital Image Correlation technique. The evaluation of the load transfer onto the piles and the settlements in the platform are some of the main points under the scope of this study. The effect of the cyclic loading and the sequence of loading on the structure’s response are examined by a comparative study between the series of cyclic and monotonic tests. Settlement accumulation and increase in the load transmitted to the piles were observed during the cycles. The image analysis gives access to the displacement field within the granular platform, and its evolution during the cycles could be analysed. 相似文献
6.
Geotechnical and Geological Engineering - Liquefaction of saturated granular soils is marked by the total loss of shear strength of soil under dynamic cyclic or transient loading conditions due to... 相似文献
7.
In this paper, we consider the mechanical response of granular materials and compare the predictions of a hypoplastic model with that of a recently developed dilatant double shearing model which includes the effects of fabric. We implement the constitutive relations of the dilatant double shearing model and the hypoplastic model in the finite element program ABACUS/Explicit and compare their predictions in the triaxial compression and cyclic shear loading tests. Although the origins and the constitutive relations of the double shearing model and the hypoplastic model are quite different, we find that both models are capable of capturing typical behaviours of granular materials. This is significant because while hypoplasticity is phenomenological in nature, the double shearing model is based on a kinematic hypothesis and microstructural considerations, and can easily be calibrated through standard tests. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
8.
简要地介绍了次加载面理论的基本思想、假设及其物理解释。在广义塑性力学的框架内，引入次加载面的思想，把常规的椭圆-抛物线双屈服面模型，扩展为次加载面循环塑性模型，以反映循环荷载作用下土体的曼辛效应与棘轮效应。模型能考虑塑性应变增量对应力增量的相关性，既能反映土体的循环加载特性，又能反映正常固结土和超固结土的单调加载特性。 相似文献
9.
An advanced understanding of the strain accumulation phenomenon in granular soils subjected to low amplitude cyclic loading with relatively high frequency is needed to enhance the ability to predict the settlement of granular soils induced by vibrations. In the current study, the discrete element method is used to study this phenomenon. A loose and a medium dense sample composed of a relatively large number of spheres are considered. A series of stress controlled cyclic triaxial tests with different excitation amplitudes and frequencies is performed on these samples at different static stress states. The response of these samples at the macroscopic and microscopic scales is analyzed. The sample density, the cyclic stress amplitude and the static stress state importantly affect strain accumulation. However, the cyclic excitation frequency has a small effect on strain accumulation. At the microscopic scale, frictional sliding occurring at a few contacts continuously dissipates energy and the fraction of these contacts varies periodically during cyclic loading. The coordination number of these samples increases slightly as strain accumulates. However, the anisotropy remains almost constant during low amplitude cyclic excitation. A qualitatively good agreement between numerical and experimental results is found. 相似文献
10.
In thermal-related engineering such as thermal energy structures and nuclear waste disposal, it is essential to well understand volume change and excess pore water pressure buildup of soils under thermal cycles. However, most existing thermo-mechanical models can merely simulate one heating–cooling cycle and fail in capturing accumulation phenomenon due to multiple thermal cycles. In this study, a two-surface elasto-plastic model considering thermal cyclic behavior is proposed. This model is based on the bounding surface plasticity and progressive plasticity by introducing two yield surfaces and two loading yield limits. A dependency law is proposed by linking two loading yield limits with a thermal accumulation parameter nc, allowing the thermal cyclic behavior to be taken into account. Parameter nc controls the evolution rate of the inner loading yield limit approaching the loading yield limit following a thermal loading path. By extending the thermo-hydro-mechanical equations into the elastic–plastic state, the excess pore water pressure buildup of soil due to thermal cycles is also accounted. Then, thermal cycle tests on four fine-grained soils (natural Boom clay, Geneva clay, Bonny silt, and reconstituted Pontida clay) under different OCRs and stresses are simulated and compared. The results show that the proposed model can well describe both strain accumulation phenomenon and excess pore water pressure buildup of fine-grained soils under the effect of thermal cycles. 相似文献
11.
As is well known, granular soils under cyclic loading dissipate a large amount of energy and accumulate large irreversible strains. Usually, with time, this second effect reduces and the accumulation rate decreases with the number of cycles until obtaining a sort of ideal stationary cyclic state at which ratcheting disappears. In this paper, only this ideal state is taken into consideration and simulated by means of a multi‐mechanism constitutive model for plastic adaptation. For this purpose, the concept of cycle is discussed, many different categories of cyclic stress/strain paths are considered and some theoretical issues concerning both the flow and the strain‐hardening rules are tackled. Even though the paper focuses on soil behaviour, the conclusions can be extended to all materials exhibiting ratcheting due to volumetric behaviour.Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
12.
基于试验基础上建立的经典弹塑性模型--剑桥模型能够准确描述正常固结土的应力-应变关系。当土体的应力历史上经历过卸载或受到循环交变荷载作用即进入超固结状态,它作为土的应力历史的反映,相比正常固结土受力特性有着显著的差异。为研究超固结因素对土体加载特性的影响,在引入能考虑超固结状态影响的下负荷面剑桥模型后,通过三轴压缩和剪切试验对处于超固结状态下土体的受力特性进行了对比分析,并对循环剪切加载下的应力-应变关系以及超固结比的演化规律进行了研究。结果表明,下负荷面剑桥模型能准确反映超固结因素对土体力学特性的影响,相比原状土有着更高的屈服强度。而通过数值模拟自由场地基在地震作用下的动力响应可以看出,超固结因素对地基的动力响应起到了不可忽略的影响,尤其在强震下更需要考虑其影响。在自由场地基地震动力响应基础上,通过对桩柱结构桩-土耦合系统在地震作用下非线性动力响应的模拟对土体非线性以及超固结因素的影响进行了对比研究,研究表明：土体的非线性因素能显著降低结构振动响应中的高频成分,由于土体在交变加载下很快进入超固结状态,相对于剑桥模型,下负荷面剑桥模型在考虑超固结因素后土体的承载性能显著提高,尤其在强震作用下超固结因素带来的影响更加明显,因此,建议对桩基结构物地震响应研究考虑超固结因素影响,以提高桩基结构物地震响应模拟的精确度和可靠性。 相似文献
13.
The stress–dilatancy relation is of critical importance for constitutive modelling of geomaterial. A novel fractional-order stress–dilatancy equation had been developed for granular soil, where a nonlinear stress–dilatancy response was always predicted. However, it was experimentally observed that after a certain extent of shearing, an almost linear response between the stress ratio and the dilatancy ratio, rather than the nonlinear response, usually existed. To capture such stress–dilatancy behaviour, a new fractional stress–dilatancy model is developed in this study, where an apparent linear response of the stress–dilatancy behaviour of soil after sufficient shearing is obtained via analytical solution. As the fractional order varies, the derived stress–dilatancy curve and the associated phase transformation state stress ratio keep changing. But, unlike existing researches, no other specific parameters, except the parameter related to fractional order, concerning such shift are required. Then, the developed stress–dilatancy model is applied to constitutive modelling of granular soil and soil–structure interface, for further validation. A series of test results of different granular soils and soil–structure interfaces under different loading conditions are simulated and compared, where a good model performance is observed. 相似文献
14.
The cyclic behavior of soil–structure interface can be very important in dynamic problems. The cyclic behavior of soil–structure interface may be nonlinear, which includes hysteresis, hardening, degradation, and particle breakage. The breakage of granular soil particles during shearing of granular soil–structure interface is associated with cyclic degradation and can be critical to the dynamic behavior of soil–structure system. The critical state soil mechanics concept formerly used to simulate the nonlinear monotonic behavior of granular soil–structure interface was modified and extended to describe the cyclic behavior, especially soil‐particle breakage and degradation during cyclic shearing. Soil‐particle breakage was assumed to relate to the energy consumption during cyclic shearing and the critical state line of the soil–structure interface was assumed to translate with the consumption of shearing energy during cyclic shearing as the threshold value is attained. The model was formulated in the framework of generalized plasticity and is capable of describing the salient features of granular soil–structure interface under cyclic loading. Most of the model parameters have straightforward physical meanings and are calibrated using monotonic or cyclic interface test results. The proposed model was calibrated and validated against published test results. The dependency of interface behavior on stress path and cyclic degradation can be successfully described by the proposed model. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
15.
This paper presents a finite element model for analysing the behaviour of granular material wrapped with polyethylene bags under vertical compression and cyclic shearing. The simple Mohr–Coulomb model is used to represent the soil behaviour. The polyethylene bag is represented by a linear-elastic–perfect-plastic model. The soil-bag interface is modelled with contact constraints. The main purpose of the numerical analysis is to validate the anticipated performance of soilbags under various loading conditions and hence the effectiveness of soilbags as a method of ground improvement. 相似文献
16.
This paper presents a relatively simple method for three‐dimensional liquefaction analysis of granular soil under offshore foundations. In this method, the Mohr–Coulomb model, which defines the elasto–plastic stress–strain relationship under monotonic loading, is modified to accommodate the plastic strains generated by cyclic loading. The effects of cyclic loading, evaluated from the results of laboratory tests on saturated samples of soil, are incorporated into the model. The method is implemented in an efficient finite element program for analyses of three‐dimensional consolidating soil. The practicability of the model is demonstrated by analysis of a typical offshore foundation, and the predictions of the numerical analysis are compared with the observed behaviour of the foundation. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
17.
This paper presents a new purely viscoplastic soil model based on the subloading surface concept with a mobile centre of homothety, enabling the occurrence of viscoplastic strains inside the yield surface and avoiding the abrupt change in stiffness of the traditional overstress viscoplastic models. This is required for overconsolidated soils. The model is formulated to reproduce the soil rate‐dependent behaviour under cyclic loading (changes in loading direction) and incorporates both initial and induced anisotropy, as well as destructuring. The model shows good qualitative response to some imposed three‐dimensional stress paths under quasi‐inviscid (elastoplastic) behaviour. Some of the main time‐dependent aspects of soil behaviour that the model is capable of reproducing were also illustrated. The capability of the model to adequately reproduce the results from an undrained triaxial test performed on stiff overconsolidated clays from the Lisbon region ( Formação de Benfica), with an unloading–reloading deviatoric stress cycle at constant mean stress, that incorporates a series of staggered fast loading and creep stages, was evaluated. The model was able to reproduce well the main observed aspects of the time‐dependent stress–strain response and pore pressure evolution of a stiff overconsolidated clay under complex loading. The revised and generalised viscoplastic subloading surface concept is viable and can be applied to a consistent extension to viscoplasticity, including in the interior of the yield surface, of existing elastoplastic models formulated for soils and other materials. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
18.
At the present time, it is very common in practice to utilize Mohr-Coulomb model to simulate the soil behaviour in the application of soil-pipeline interaction problems. However, the traditional Mohr-Coulomb model is unable to predict the realistic loading that can apply on buried pipes during large ground deformation. Especially, the linear elastic-perfectly plastic Mohr-Coulomb model is not capable of simulating the unsaturated soil loading which can result larger than anticipated loading due to suction induced additional normal force between the soil particles. A user defined unsaturated modified Mohr-Coulomb model is developed within a generalized effective stress framework considering suction hardening effects to capture the realistic loading induced by unsaturated soil medium. Firstly, the model has been developed considering microscopic and macroscopic suction hardening mechanisms, and was implemented into a commercial finite element program associated with user subroutine written in FORTAN. Then the model was validated through a series of unsaturated triaxial compression tests conducted on the basis of different sand types having various initial conditions. Finally, the model has been applied to simulate the behaviour of pipelines subjected to lateral soil loading in unsaturated soils. The results revealed that the modified Mohr-Coulomb model has reasonable predictions when compared to the load-displacement response of pipes obtained from two large scale testing programs. The developed model can be used to predict the increased strength and stiffness associated with soil suction that increases lateral loads on pipelines, and thus has widespread relevance for simulating the pipeline response in unsaturated soils under externally imposed ground movement. 相似文献
19.
软土是一种非线性流变物质,但现行流变模型却忽略了加载瞬时的非线性变形;软土流变试验参数是数学模型参数而非物理模型参数,一个土样一般只对应一种材料参数,但现行流变模型的模型参数常随着荷载变化,且变化无规律,离散性大。基于以有机质为流变相物质的人工土试样室内一维压缩蠕变试验,建立了各级荷载作用下具有相同模型参数的7组件流变模型,用非线性弹簧H描述软土加载瞬时弹塑性变形、并联的三元件组件模拟软土随时间变化的黏弹塑变形。结果表明：引入三次非线性瞬时弹性模量的7组件流变模型能够较准确地反映软土的流变特性。 相似文献
20.
Macroscopic frictional behavior of granular materials is of great importance for studying several complex problems associated with fault slip and landslides. The main objective of this study is to model the macroscale frictional behavior of granular soils under monotonic and cyclic loadings based upon micromechanical determination of dissipated energy at particle contacts. This study is built on the general observation that the externally computed energy dissipation should be equal to the total internal energy dissipation derived from inter-particle sliding and rolling, energy losses from inter-particle collisions, and damping. For this purpose, the discrete element method is used to model a granular soil and determine the stored, dissipated, and damping energies associated with shear loading for applied monotonic and cyclic velocities. These energies are then related to the friction by an application of the Taylor-critical state power balance relationship. Also, the contributions of the different modes of energy dissipation (normal, shear, and rolling) to the total frictional resistance were studied. By changing the inter-particle friction, the simulations showed that the macroscopic friction was nearly constant, the slip friction increased almost linearly with increasing inter-particle friction, and the difference between the two was attributed to the non-energy dissipating dilatancy component. By providing a clear relationship between energy dissipated by micro-scale mechanisms versus the traditional engineering definition based on macro-scale (continuum) parameters, this study provides a means to develop a better understanding for the frictional behavior of granular media. 相似文献
|
下载免费PDF全文