共查询到18条相似文献，搜索用时 265 毫秒
1.
为提高耐压柱壳设计效率,设计了耐压柱壳参数化分析流程。研究了有限元分析所涉及的材料属性、载荷施加、边界条件设置等内容,确定了采用弧长法分析耐压柱壳稳定性。利用Python语言对于ABAQUS软件进行了二次开发,利用Isight软件实现了ABAQUS的集成,实现了耐压柱壳有限元分析模型的网格自动划分、自动分析计算等。选择样本点进行参数化分析,利用响应面模型对于样本点进行了拟合,得到了具有较高拟合精度、满足工程需要的近似模型,进行了设计变量的灵敏度分析。研究结果表明:参数化分析流程可实现耐压柱壳的自动分析、近似模型及灵敏度分析,可降低耐压柱壳分析难度,均可提高耐压柱壳设计效率。 相似文献
2.
3.
耐压舱设计是水下机器人的核心技术之一,其极限承载力研究是核心中的核心。针对球壳封盖加柱形壳体耐压舱,现行标准对于初始导入缺陷数值的确定往往过于保守,对于耐压舱体数量较多的无人潜水器来说,过大的设计质量是总体设计所无法接受的。首先采用装配体整体建模策略,建立复合屈曲的受力模型,将三大非线性影响因素同时引入到极限承载力研究中,提升了计算精度。然后分别针对确定性缺陷和非确定性缺陷结构开展极限承载力研究。最后,提出以0.23%的初始缺陷导入尺度作为球壳封盖加圆柱壳体的耐压壳体缺陷导入参数,给出了导入尺度的计算方法,并借助水压试验对上述参数的准确性进行验证。 相似文献
4.
结合模型试验和数值计算对大潜深、带大开口的球形耐压结构静态力学性能进行了研究。研究中考虑到材料非线性、非弹性的因素,通过对材料拉伸试验曲线的分析,得到了材料应力-应变的近似表达式;并且利用超声测厚仪对结构模型的几何缺陷进行了测量。同时基于参数化设计语言建立了有随机几何缺陷的有限元模型,并利用接触单元考虑了大开口观察窗与耐压结构的联系。试验验证表明论文提出的利用有限元软件分析大潜深、大开口耐压壳体力学性能的计算方法和计算策略是准确可靠的,所获得的结果可供设计使用。 相似文献
5.
6.
7.
球柱组合壳是单壳体潜艇耐压船体结构的主要形式,其结构在极限载荷作用下的极限承载能力和变形是评估潜艇结构安全性的重要指标。 在试验模型基础上,根据三维实测初挠度数据建立含缺陷的球柱组合壳有限元模型,将极限强度计算结果与试验数据对比分析,结果表明:上述数值方法准确可靠,且缺陷的引入对于工程上潜艇结构的极限承载能力评估具有实际意义。 相似文献
8.
周向变刚度环肋圆柱壳应力分析研究 总被引：1，自引：0，他引：1
采用大曲率梁理论和弹性基础梁带理论,建立潜艇特殊舱段结构的力学模型。利用能量法求出肋位处耐压船体壳板中面周向应力。建立环肋圆柱壳微分方程并根据边界条件求解,得到周向变刚度环肋圆柱壳应力计算方法。通过理论分析和模型试验验证了本计算方法。 相似文献
9.
10.
初始缺陷对深海载人潜水器耐压球壳塑性稳定性影响 总被引：5，自引：0，他引：5
载人深潜器耐压球壳是中厚度壳结构,当结构发生失稳时,球壳结构的局部部位因为材料达到屈服极限而发生了塑性变形.将有限元分析与经典理论相结合,研究弹性屈曲模态缺陷、局部缺陷以及球壳整体圆度和厚度偏差对中厚度球壳结构的塑性稳定性的影响.计算结果表明中厚度球壳结构对初始缺陷并不很敏感,对球壳结构当局部缺陷范围刚好达到临界弧长时结构的承载力最弱.通过缺陷结构和完善结构的极限承载力比较,提供了初始缺陷影响曲线. 相似文献
11.
A new method for platform design, named parametric platform design method (PPDM), is presented in this paper in order to improve the mobile platform design efficiency. In this method, an integrated parametric system that fully considers the characteristics of the platform is developed, which significantly optimizes the design process with the top–bottom design concept. In the parametric system, the main geometric dimensions are taken as parameters, while the topology between the structure members, the function requirements and the safety requirements are converted into geometric constraints. By geometric constraint solving (GCS), a set of parameters that satisfy all the given constraints are determined, and then the design scheme is obtained by several core algorithms, such as parametric tank subdivision, 3D stability calculation, parametric structure design, FEM preprocessing, etc. The parametric method greatly increases the changeability and the reusability of the platform model, and concurrent design is well supported. As the model is driven by parameters, PPDM is an excellent method for optimization design. As a result, PPDM has incomparable advantages on the design efficiency over traditional methods. 相似文献
12.
Strength design method for tubing hanger of subsea christmas tree against big temperature difference
The tubing hanger is an important component of the subsea Christmas tree, experiencing big temperature difference which will lead to very high thermal stresses. On the basis of API 17D/ISO 13628-4 and ASME VIII-1, and by comprehensively considering the erosion of oil and the gravity load of the tubing, a calculation model is established by regarding design pressure and thermal stress, and the method for designing the tubing hanger of the horizontal Christmas tree under big temperature difference condition is developed from the fourth strength theory. The proposed theory for strength design of the tubing hanger in big temperature difference is verified by numerical results from ABAQUS. 相似文献
13.
海底斜坡稳定性受风暴潮、海底地震等诸多不确定因素影响,易发生失稳破坏,产生较大的海洋地质灾害。简要介绍海底斜坡稳定性分析方法,建立曹妃甸深槽典型斜坡计算模型,确定了模型计算的海底地形参数、地层结构参数、土体物理力学参数等指标,利用GEO-SLOPE斜坡分析软件进行海底斜坡稳定性定量计算,分析了工程建设前自然状态下以及在大规模工程建设后海底斜坡稳定性,并模拟分析了在大风浪和地震等极端条件下斜坡的稳定性,确定了海底斜坡失稳空间特征。首次采用数值计算对曹妃甸海底斜坡稳定性进行定量分析评价,可以为类似近海建设工程提供重要的参考作用。 相似文献
14.
1 .IntroductionThe large-diameter cylindrical structure for coastal and offshore engineering has been widely usedin China .Thistype of structureis composed of a steel or reinforced concrete cylindrical thin-wall shellplaced partlyintothe ground by a speci… 相似文献
15.
The parametric instability of a spar platform in irregular waves is analyzed. Parametric resonance is a phenomenon that may occur when a mechanical system parameter varies over time. When it occurs, a spar platform will have excessive pitch motion and may capsize. Therefore, avoiding parametric resonance is an important design requirement. The traditional methodology includes only a prediction of the Mathieu stability with harmonic excitation in regular waves. However, real sea conditions are irregular, and it has been observed that parametric resonance also occurs in non-harmonic excitations. Thus, it is imperative to predict the parametric resonance of a spar platform in irregular waves. A Hill equation is derived in this work, which can be used to analyze the parametric resonance under multi-frequency excitations. The derived Hill equation for predicting the instability of a spar can include non-harmonic excitation and random phases. The stability charts for multi-frequency excitation in irregular waves are given and compared with that for single frequency excitation in regular waves. Simulations of the pitch dynamic responses are carried out to check the stability. Three-dimensional stability charts with various damping coefficients for irregular waves are also investigated. The results show that the stability property in irregular waves has notable differences compared with that in case of regular waves. In addition, using the Hill equation to obtain the stability chart is an effective method to predict the parametric instability of spar platforms. Moreover, some suggestions for designing spar platforms to avoid parametric resonance are presented, such as increasing the damping coefficient, using an appropriate RAO and increasing the metacentric height. 相似文献
16.
17.
基于柔性杆理论和尾流振子模型计算陡波形立管的涡激振动响应;综合使用S-N曲线法、雨流计数法、Palmgren-Miner线性累积疲劳理论对立管涡激振动导致的疲劳损伤进行计算分析。并以MATLAB为平台编写相应计算程序,将本文计算得到的静力分析结果、固有频率和疲劳损伤分别与专业海工计算软件OrcaFlex和已发表文献进行对比验证。进一步对陡波形立管在涡激振动下的疲劳损伤进行参数敏感性分析,结果表明:浮子段长度、浮力因子、弹性模量、海流速度、波浪高度对陡波形立管疲劳损伤均有较大影响,有望为陡波形立管的实际工程设计提供参考。 相似文献
18.
Flexible marine risers are commonly used in deepwater floating systems.Bend stiffeners are designed to protect flexible risers against excessive bending at the connection with the hull.The structure is usually analyzed as a cantilever beam subjected to an inclined point load.As deflections are large and the bend stiffener material exhibits nonlinear stress-strain characteristics,geometric and material nonlinearities are important considerations.A new approach has been developed to solve this nonlinear problem.Its main advantage is its simplicity;in fact the present method can be easily implemented on a spreadsheet.Finite element analysis using ABAQUS is performed to validate the method.Solid elements are used for the bend stiffener and flexible pipe.To simulate the near inextensibility of flexible risers,a simple and original idea of using truss elements is proposed.Through a set of validation studies,the present method is found to be in a good agreement with the finite element analysis.Further,parametric studies are performed by using both methods to identify the key parameters and phenomena that are most critical in design.The most important finding is that the common practice of neglecting the internal steel sleeve in the bend stiffener analysis is non-conservative and therefore needs to be reassessed. 相似文献